Making Edge-Grain Patterned Plywood
Переглядів 3,353,082
2 роки томуAnother experiment with Patterned Plywood. This time I'm experimenting with patterned plywood edge-grain? This is a very DIY friendly technique that looks more complicated that it is...
If you want to help make videos like this, join the Patreon! You get early access to videos, direct access to me via chat, and exclusive rewards including stickers and t-shirts. / almfab
This channel is also supported by Rockler. Thanks Rockler!! Rockler products used in this video:
Rockler Sure Foot Clamps www.rockler.com/surefoot-alum...
Rockler Bandy Clamps www.rockler.com/rockler-bandy...
Rockler Marking and Measuring Pouch www.rockler.com/marking-and-m...
Rockler Glue Paddles www.rockler.com/rockler-glue-...
Rockler Bench Cookies www.rockler.com/bench-cookie-...
Rockler Bench Cookie Finishing Cones www.rockler.com/rockler-bench...
Additional products used in the build (affiliate links)
12” Speed Square amzn.to/3iN0hov
Festool Track Saw amzn.to/3x5Hxpc
Saw Stop 36” 3hp Cabinet Saw amzn.to/3eQyQZR
Mirka Deros Sander amzn.to/3eRsg5e
Jet 14” Bandsaw amzn.to/3kT6B0i
Kreg Bandsaw Fence amzn.to/3x31PQb
Starbond CA Glue amzn.to/3rJIx1v
Empire Framing Square amzn.to/2WiBMrF
GVS Half Mask Respirator amzn.to/3zthlGI
Weldwood Contact Cement amzn.to/3zyH6Wm
Titebond 1 Wood Glue amzn.to/3x1QiRj
Glue Bot Glue Bottle amzn.to/3zr79OQ
Table Saw Blades I use (affiliate links)
Note because I have a 3 hp saw I use “ industrial” 1/8” kerf blades. If you have a lower power saw you'll want to use "Thin Kerf" Blades.
Cutting splines, crosscutting, and general usage | Freud 10” x 50T Combo Blade
Industrial amzn.to/31q5w56
Thin Kerf amzn.to/3cqIYHK
Ripping and milling | 10” x 30T Glue Line Ripping Blade
Industrial amzn.to/3w6Yv7B
Thin Kerf amzn.to/3svkLpg
Plywood | 10” x 80T Freud Ultimate Plywood Blade
Industrial amzn.to/3ssGjTr
Thin Kerf amzn.to/2NZf3NB
You can support the channel by joining the Patreon!
/ almfab
almfab.com
Instagram @almfab / almfab
Pinterest /almfab / almfab
Facebook /almfab / almfab
Music: www.epidemicsound.com/
@LoaFrz 2 роки тому
Plywood industry working REAL hard on making plywood a viable and consumer friendly option with its main two faces. And this guy comes in without a care and hides it. Genius, love the content.
@itsmehere1 2 роки тому
This man literally just made damascus wood
@jesterman1302 Місяць тому
Totally
@TheDrunkhammer 28 днів тому
I laughed so much
@idontwanttopickone 2 роки тому
If you veneer the original plywood (before you started the process) with a very different looking wood. Maybe a brightly coloured stained veneer or brightly coloured plastic, or even if you started by glueing two pieces of plywood together with a coloured resin. Then you'd end up with a thin line of colour that would add a lot to the finished pattern. I actually really liked it before you veneered it. Those little squares added a nice little detail around the edges.
@inthefade 2 роки тому
Agreed
@Blackraven6 Рік тому
I think I'd just used a chamfered edges on those.
@giovannimoriggi5833 11 місяців тому
Plastic………………😳
@davidelliott5843 11 місяців тому
Glueing plastic to wood is unlikely to be reliable. Gluing three sheets of thin ply is unlikely to deliver a flat sheet. Not to mention the silly costs of Baltic birch plywood.
@calfagra 10 місяців тому
Agree, the veneer actually make it like plywood again with different pattern and hiding those trace of artistic hardwork
@ordelian7795 2 роки тому
8:44 you can see a spiral pattern form as the diamond ones misaligned.
@giavri2010 2 роки тому
looks so much better to me bro.reminds me an ancient greek pattern
@kennyk4134 2 роки тому
Well spotted.
@dottyjyoung 2 роки тому
Daaaaaaaamn! Y'all are quilting in the comments section, I love it.
@dottyjyoung 2 роки тому
Yep, thats a greek key design. Very popular on wedding bands too
@ifollowjesus1667 2 роки тому
Wow, I am a woodworker and have never liked plywood until just now. You are very talented and this is definitely high end material that you just created.
@bgrove777 2 місяці тому
This is one of the most inspirational carpentry vids I've ever seen. Keep on truckin'
@martinpanev6651 2 роки тому
By the way, anyone who does not have all of these tools, dont be discouraged! It is entirely possible (and I, a total noob have done) this all by hand :D
@Arterexius 2 роки тому
Even if someone doesn't have the shop, but owns a jigsaw that can be angled, then it's still possible to do with relative ease (and without spending oceans of time on it). Did you do yours entirely by hand? If so, that must have taken an insane amount of time
@martinpanev6651 2 роки тому
@@Arterexius Yep. It took a while but it inspred me to keep going and upgrade my tools!
@l3d-3dmaker58 2 роки тому
i love the way it looks when you offset it by one or three and it looks like a very cool spiral pattern, would have loved to see you use it! looks much more refined and complex, would personally love it on a piece
@Skitad 2 роки тому
I was about to say exactly the same thing
@simonstucki 2 роки тому
noticed that too at around 8:20
@evelinagarcia6352 2 роки тому
@@simonstucki Evidently I missed it so I looked for it at 8:20 to see what the big deal was and didn't find it. Well I kept going a bit more and WHOA, there it is @9:20-9:21. Wow!!!; that is terrific! Attention to detail. Thanks
@evelinagarcia6352 2 роки тому
You are right! I totally missed that. It would look absolutely amazing. Good eye.
@exintrovert6803 2 роки тому
Pause video at 9:42 for a great view of the spiral pattern.
@IAMCUBEMAN 2 роки тому
"No, pattern welded Damascus must be metal." "Hold my drink."
@steadfasttherenowned2460 2 роки тому
Bonus, I've been looking for different ways to apply veneer. This is the first time I've seen contact cement used. Usually it's a big elaborate glue and clamp process. I came for the plywood pattern and left with a new to me veneer process I am definitely going to try.
@lukejones7366 2 роки тому
2p10 super glue / activator is an excellent option as well
@TheBeaker59 2 роки тому
We use a 40mm silicone rubber roller to roll afterwards much better than the ply idea though that is a good start point.
@johnfarrar1482 2 роки тому
Using contact cement with veneer is a bad idea. Not permanent, it'll bubble eventually. Get a vacuum press and use Titebond
@gipsasl 2 роки тому
Bro if you have Wood Glue you don't need to use any toxic Glues. We make Bespoke Furniture in England mostly we use PVA,which is wood glue.Don't know Why everyone thinks they need some sort of epoxy to glue Venner..... After All veneer is just thin piece of wood
@Djlukz 2 роки тому
It is what they use for laminate to adhere to the particle board.
@Kritacul 2 роки тому
A person going way beyond their means to bring better quality and design is always great to see. For craftsmanship like this, you deserve to be paid top dollar because of the quality.
@MakerCuisine 2 роки тому
Wow the pattern is incredible, i imagine that would look great to have the pattern continue all the way around the piece. Top, bottom and all the sides
@seandegroote1915 2 роки тому
I love your stuff Michael! This is such a neat way to take exposed ply edges to the next level!
@ebw78756 2 роки тому
Wow! I don’t know how I stumbled upon this video but I enjoyed it so much! That veneer is stunning. It makes me want to sell everything I own and set up a woodworking shop in my garage. You are a true artist.
@MichaelAlm 2 роки тому
Hahaha! Glad you enjoyed it!
@Rustybear59 2 роки тому
I really admire your ability to think outside the box with your woodworking! This is outstanding! Thank you for sharing!
@ronhansen7717 2 роки тому
When gluing on the veneer, lay down several thin strips of wood across the substrate and put the veneer on top of the strips. Pull the strips out one at a time and allow the veneer to attach to the substrate a little at a time. That way you won't position the veneer in the wrong place. Once the two pieces touch, they are not coming apart. Use a j-roller instead of a piece of wood to finish the adhesion. This is pretty much the same as attaching plastic laminate like Formica. I once positioned a large piece of plastic laminate incorrectly and had to remove it. I wound up using Autozone's brake cleaner to spray between the layers. It dissolved the contact cement immediately and I was able to clean it up and re-glue it. It was simply amazing. I haven't tried it with wood veneer and I hope I will never have to.
@chichidouglas5078 2 роки тому
Thanks for the info. I've had the same thing happen but it wasn't a big piece so I just made another one. But I always have brake cleaner for mechanic work and that would have been faster and no wasted material. I haven't made that mistake since but it's still good to know
@wholegrain27 2 роки тому
@@chichidouglas5078 doesn't applying some heat release the contact enabling repositioning
@chichidouglas5078 2 роки тому
@@wholegrain27 I had to finish a kitchen & bathroom remodel that someone else started and got fired halfway through. Nobody lived there and it sat through the winter with the heaters turned off and the countertops had bubbled up In several places. I didn't know how to fix it because I'd only used the prefabed countertop pieces. But I had used the pre-fab end caps that have dried glue on the back that you stick on using a clothing iron. So I used an iron with a damp hand towel under it. It took a while but it worked and I also had to put weights on it right after I rolled it because it would start popping up after a couple minutes. So heat does reactivate it but I've never tried to reposition a whole piece before.
@AlanWhiteman 2 роки тому
As always, an awesome and inspirational presentation. You definitely make complex/sophisticated stuff look simple and practical.
@donnecheli2721 2 роки тому
That ‘wood’ look great as plywood end grain laminate countertops
@jamesconroy7030 2 роки тому
"Great temporary solution" Yeah, that should be Harbor Freight's motto.
@northwestgardener5076 2 роки тому
We all go there first, and then upgrade later.
@ToolforOffice 2 роки тому
Hater. I've had a 20 dollar Chicago grinder last longer than a Makita before. Obviously it's an exception to the rule but don't be a hater
@jamesconroy7030 2 роки тому
@@ToolforOfficeI don't hate them. I said they were great.
@ToolforOffice 2 роки тому
@@jamesconroy7030 I must need to learn to read again I suppose
@ThatVatoKingDirk 2 роки тому
Are they not? HF has gotten me out of so many problems.
@mikesegarra869 2 роки тому
This was really impressive someone get this guy a bagel!
@ardemus 2 роки тому
I liked the look of the exposed edge of the plywood-edge-edge-banding.
@themadsamplist Рік тому
I used to make my own plywood from all kinds of wood veneer. The veneer is thin so you get a lot of layers and if you use dark and light wood it gives a great effect.
@SunraeSkatimunggr 2 роки тому
That is sooooo pretty. I used to use plywood for wood carving of sculpture many years ago, before my hands go very arthritic. I loved the topographical look of the human form carved with all those layers.
@JuanCruz-et8so 2 роки тому
Woodworking is one the most beautiful and satisfying jobs to do. Thank You to all The wonderful Skillful wood workers for making beautiful work.
@evilgenius3646 2 роки тому
4:35 If you cut that piece in half, couldn't you glue the 2 halves together at the notch ends? It looks like they would fit perfectly and you would have a square piece with no edge waste.
@wizard-of-bacon9384 2 роки тому
Great idea
@123jbuster 2 роки тому
that was actually a good idea
@AnxiousCowboy 2 роки тому
no, sorry...
@DraconicDuelist 2 роки тому
Maybe if every piece was the same length, but it looked like they had some variance.
@Alakay77 2 роки тому
Thank you so much for sharing your ideas and know how! I'm studying to be a woodwork teacher, and am excited to share this with my students in the future :D
@bluesky6327 2 роки тому
This is a really thorough and thoughtful how-to video, but honestly, for me, the biggest benefit is pure inspiration. I’ve worked with a lot of reclaimed plywood and saved those little offcuts because they’re just too cool to waste. Your ideas have inspired me to create inlays and edge banding with those old beauties. Fantastic content, looking forward to viewing more of your work!
@pinkyhotmessx69 2 роки тому
I'm like you I can't bare to toss left overs because they can somehow be used for something cool
@jodyshepard9482 2 роки тому
Wow! Who knew plywood could be soooo nice? Two secrets: great power tools and a gazillion wonderful clamps. Oh yes, very clever talented wood worker!
@wkurick 2 роки тому
This is amazing, truly creative not to mention visually appealing! You’ve truly made it addicting to watch your videos using bb ply especially. Thank you for open sourcing these innovative concepts with the rest of the woodworking community 🤙👊.
@SteveSiegelin 2 роки тому
I thought I was the only one that used a Japanese pruning saw as a flush cut saw! I discovered that a few years ago and it has become my favorite tool. If anybody else wants to pick one up you can pick a flush cut with a composite handle up at most harbor freights for $12. When I started buying them they were $6 but they've gone up a little! Well worth the purchase.
@pinkyhotmessx69 2 роки тому
Amazon has done really neat ones
@katevanhoudt 2 роки тому
Gorgeous! Love your attention to detail and design. Nice shop. Love those long clamps.
@jollygoodbeard13 2 роки тому
Wood workers are awesome people they have more patience than I could ever have
@joelcopeland3018 2 роки тому
Your patterned plywood builds and ideas are simply amazing... keep them coming...
@celinecounali 2 роки тому
Love it ! I would be curious to try 45° cuts, see if it is is solid enough, it would allow a uniform pattern all the way around (except for the last corner, unless you're a maniac enough to try to make a perfect fit with the size of the pattern :p )
@s.wilson5199 Рік тому
I appreciate how you model good safety practices!👍
@Lechanan 2 роки тому
Really beautiful, unique and creative! Thank you for the content! Glad this brought me to your channel!
@piratetaylor29 2 роки тому
Geez, I'd be honored to have a cutting board or cheese board that looks like that. A+++
@georgedavies7903 2 роки тому
U8
@AshenSoulHunter 2 роки тому
Seen oriental carpenters who do this kind of thing and instead of using a bandsaw to cut 1/8th inch strips, they use a hand plane to shave a paper-thin veneer for edging. Zero curf too so you get TONS more use from a single piece of stock.
@martykorn9266 2 роки тому
Ive seen them hand planing paper thin strips. But I think doing that with end grain BB with 20% of the surface being glue joints would be impossible.
@Zogg1281 2 роки тому
That does give your ply wood so much more style!! It would be interesting to try to do a whole kitchen like that..... possibly with different patterns in different areas 🤔 I have a bench that I want to build in my workshop so when I get round to it I think I'll give this a go...... fancy workshop furniture 😍 👍👍👍👍👍
@Raeburnsart 2 роки тому
I feel like this would make a lovely surface for a painting with the decorative edge. Like a collab of painter and woodwork
@MissMolly3377 2 роки тому
I was thinking the exact same thing. Would make a lovely edge, for a painting.
@Justin-Outdoors 2 роки тому
Reminds me of 70s wallpaper.
@underablackflag 2 роки тому
It just looks so good. The veneered piece is magnificent. Now I need to find an excuse to use this on something.
@justinkinter8651 2 роки тому
You got that right, it looks absolutely stunning :)
@Gustav0ang1e 2 роки тому
That was extremely cool, I can see so many opportunities to use this. Oh the possibilities!
@joshn1678 Рік тому
Wow, this is beautiful, I could think of a thousand different uses. Thanks for this.
@yosecretsquirrel 2 роки тому
Mind blown, thank you. And thank you for reminding me just how satisfying working with wood can be. I was actually jealous of you.
@laurendao4467 2 роки тому
I just love watching your creativity unfold in pushing these ideas further and further. Really excited to see next week’s project!
@jewdd1989 2 роки тому
I’ve thought about using patterned ply as edge banding when you’ve done like the tambour shop cabinet, your wife’s ply and metal workbench, etc etc. I absolutely love it, if you added patterns mixing hardwood with ply it’d be stunning just like with your cutting boards and your tool chests… you’re the Micheal Angelo of woodworking with the art you implement in your projects. I can’t wait for next week, it’ll take forever to get here. Thanks a bunch for showing the process of your experiments lol
@MichaelAlm 2 роки тому
Thanks so much! Mixing patterns with hardwood is a great idea! I'm looking forward to sharing the furniture piece. It's going to be a good one 😉
@myincarnation4922 2 роки тому
@@MichaelAlm I've worked with alot of plywood but honestly never thought about using it as a finished edge. Great idea. Thank you.
@jewdd1989 2 роки тому
@@MichaelAlm I’m sooooooooo excited! Thanks a bunch for all the hard work you put in not just the builds themselves but the filming and the attention to detail in explaining how or why, your solutions for problems… phenomenal and greatly appreciated 🤘🏽
@indycustommade3568 2 роки тому
Very nice look. That really opens the door to new ideas. Great job.
@Hessijames79 2 роки тому
What an awesome result. I even liked the look before veneering.
@stanwiggins3423 2 роки тому
Very informative Michael, and the diamond pattern is really great looking. The chevron pattern looked great too, but the diamond really popped. Thanks.
@gianniutube 2 роки тому
This looks so amazing! Wow, I’m bluffed! Kudos on having the idea and executing it so well.
@21centurymagic 2 роки тому
Glad to see Bam has turned his life around
@octowuss1118 2 роки тому
I think this got recommended to me bc I watch the Japanese woodworking vids. I love their patterns and how they plane it and make their own beautiful veneer
@hambeastdelicioso1600 2 роки тому
I like how if you offset the strips just a bit, you get a greek key pattern, too!
@chemicallust77 2 роки тому
This would be a really cool look for larger speaker cabinets
@chelin7023 2 роки тому
To see is to believe! Great craftsmanship! 💚
@n2darkness 2 роки тому
I wonder if you did a dado on the edge leaving about a 1/16 on each side and then inlaid the pattern pieces. That way you would have a solid top and bottom without having to use veneer
@darkmagna9004 2 роки тому
Great idea. I'm stealing it! :)
@kidlatbangis4782 2 роки тому
Good idea, but unless you smoothen the edges of the strips, you might see the burry edges of the strips merely filled solid with glue.
@texasfossilguy 2 роки тому
@@kidlatbangis4782 smear very fine sanding dust into that or sand after gluing while the glue is wet.
@runninghead 2 роки тому
Wonder if the ancient Greeks knew about lamination? That "Greek Key" pattern when the strips misalign is great!
@african9686 2 роки тому
They relied so much on original materials.
@davel9015 2 роки тому
What a beautiful way to finish a plywood project.
@sunnywithpuddles 2 роки тому
Awesome. Totally get covering the top with veneer, but I think the top edge pattern could also be a nice touch on some projects. Thanks for the video!
@cesalt2408 2 роки тому
I just love this technique!
@MichaelAlm 2 роки тому
Thank you!
@doubledarefan 2 роки тому
12:22 Clamp the strip between 2 boards to keep it straight and to allow you to apply a bit more force.
@kidlatbangis4782 2 роки тому
or use steel bars
@ZSchrink 2 роки тому
This was a super neat introduction to your channel. This looks really amazing!
@pigmar Рік тому
You have no idea how many ideas this video gave me 🙏
@bartloncke9359 2 роки тому
Rather than messing with paint rolls in order to apply contact cement, try applying it using a spray. You only need to cover the background with some scrap hardboard or paper. For smaller surfaces you need the double amount of glue as your roll absorbs a lot of contact cement.
@williamellis8993 2 роки тому
Great idea, Michael. Try running a groove in a piece of wood the thickness of your strips and using it to hold them when you sand the edge. That will reinforce them and keep the edge straight. Also, that piece of wood you used for burnishing the veneer is the same as the old hammer veneer technique. Take care. Bill
@FurnitureFlippingForProfit 2 роки тому
Wow! So glad I found your channel! Thank you for your wonderful videos and thank you for sharing your talent with us!
@njineermike 2 роки тому
That right there is commitment and attention to detail!
@davidg8083 2 роки тому
I have tried the plywood blades that do not have carbide tips on them, but they dull fast and then burn. What works best for me is a 7-1/4" 24 tooth carbide blade that is about 1/16" wide and a zero clearance insert. It cuts great and usually does not leave any fuzz like you are seeing. The down side is you can't cut more than about 2 inches deep and a SawStop tablesaw will not work with anything smaller than 10" unless it's a Dado blade. Otherwise this is my go to tablesaw blade.
@joshsoorlin579 2 роки тому
All that and you dont even mention what brand?
@MEmarcenaria 2 роки тому
Lindo trabalho amigo 👍👍 parabéns 👏👏.🇧🇷🇧🇷🇧🇷
@alycynde5237 Рік тому
That's pretty wild how well that turned out!
@saraperry6667 Рік тому
that finished product is INCREDIBLE!
@caesar2164 2 роки тому
Another way to make the edge banding invisible: cut a wedge of that patterned edge banding and cut a angled channel around the whole piece. That will hide the seam of the edge banding in the top veneer of the plywood. (See the way 3x3 Tamar does her hidden hard wood edge banding)
@mrfochs 2 роки тому
This!!!! They even make a set of router bits that are both "diamond" shaped and "hour glass" shaped to match this up as edge banding with no visible top/bottoms. Using that and mitered ends would make for a really nice final look.
@wllys55 2 роки тому
Use a new blade when sawing the strips. Should help with the “fuzzies”. Then switch back to old blade when done for regular cuts.
@jeffcook8501 2 роки тому
Run a scrap board under the board you are cutting and you will get no fuzziness.
@RetiredRhetoricalWarhorse 2 роки тому
@@jeffcook8501 You mean like the plexiglass he used but didn't work?
@aidanwoodward3975 2 роки тому
Why do fuzzies sound like knockoff furrys?
@HonoredMule 2 роки тому
@@RetiredRhetoricalWarhorse I believe a sacrificial board below will work better because it moves with the workpiece, providing more stable support for the edge fibers.
@nathanielsnyder1323 2 роки тому
man these on some frameless baltic birch cabinets would look so dope in my kitchen. amazing stuff Michael 👏🏼
@a-fletcher 10 місяців тому
I have to admit even that strip you cut on the wrong side actually looks amazing. Has a lot of potential with both sides having a nice feel to them.
@abelolsen9656 2 роки тому
At first, I thought you gonna make a whole sheet with those diamond pattern cut inside of one ply of wood on top and bottom.
@nullsnaggle5198 2 роки тому
...have fun with that😓(directed to anyone who wishes to do that)
@woodandwandco 2 роки тому
Thank you Michael, I expect Baltic birch boards to outprice gold ounce for ounce once the lumber gods lay eyes on your edge banding.
@17Liberty76 2 роки тому
Fantastic idea. One of those that makes you wish you had thought of it. Absolute genius and impressive initiative
@dominicpaulos4145 2 роки тому
This is such an easy way to make plywood look classy!
@chrisdavis1722 2 роки тому
Love anything with the patterned plywood on it. It’s so artistic and beautiful. Great job! 👍
@buffpanda527 2 роки тому
Curious if youve seen/thought about getting some japanese saw blades so you can make paper-thin veneer (yosegi shavings!). I do love the thicker edge so you can see the pattern on top as well though, but thats just personal preference! Looks amazing either way!
@erwinbenally8027 2 роки тому
I applaud your patience
@noncin.2786 2 роки тому
Beautiful product and great to see your process!
@Karl_Baeron 2 роки тому
Thanks for the great video, I really love the experiment! I've got a question: did you ever think about using epoxy as your bonding medium for patterned plywood?
@dyscea 2 роки тому
If you’re going to make even wider pieces, i noticed that when it was offset some more, it made loopy rectangular shapes. Nice job!
@CustomLowzVids 2 роки тому
as someone who works with birch plywood about everyday, this is inspiring.
@yvonnehughes3036 2 роки тому
Wow. That worked out beautifully!
@DM-wp9vq 2 роки тому
Somebody has probably already mentioned this, but if not I'll give it a go. That plywood you made (the patterned plywood) wood (see what I did there?) look amazing as a tabletop in its own right. Just clamp all of the strips together and plane/sand them level and clean and arrange the patterns you want on a tabletop. Then flow some Envirotex/Epoxy over it to seal it up, protect it, and give it depth. I think that would look amazing! You could also ebonize it when using wood with higher tannin content, or do some selective staining on different pieces to create further pattern differentiation. Love what you created by the way! It's definitely amazing looking!
@gregzambo6693 2 роки тому
They would make great inlays about a half inch in from the edge of a tabletop
@darkmagna9004 2 роки тому
Another great idea! You guys are on fire!
@davidpetersonharvey 2 роки тому
That's a really cool project. Thanks for sharing. I sent the link to my wife. She comes from a woodworking family and will love this.
@edwinlozano7255 2 роки тому
That looks amazing , imagine the things you can do !
@jcortese3300 2 роки тому
I strongly recommend that you familiarize yourself with a quilting pattern called "bargello." I'm sure you can replicate it with this technique, and it would look gorgeous.
@AnxiousCowboy 2 роки тому
i disagree
@Beacuzz 2 роки тому
I think it would be hard but nice
@googleyoutubechannel8554 2 роки тому
"I hear you're something of a woodworker?" "I prefer 'glueclamper'"
@kasai7272 2 роки тому
In my head, I pronounced it like it was a German compound noun lol
@codymadison9993 2 роки тому
Never even thought of this. Very cool.
@stephenyoud6125 2 роки тому
In my PhD project i was cutting test specimens from thick pieces of Polyethylene pipe wall on the band saw, and to get a smoother cut i took the sharp edges off the offset teeth using a piece of carborundum grindstone and it made a nice smooth cut as the fro cutting edge of the teeth are still normally sharp
@F4ngel 2 роки тому
That's neat. You're basically making damascus steel but with wood. Just an fyi steel behaves similar to wood with all the grains. Instead of heating and beating you're using glue to stick it together, it's a very good visual of how damascus steel is made.
@ReneMarek47 2 роки тому
Can't you just mill a wide groove in the edges leaving the top and bottom layer of the plywood intact and embed the pattern between them?
@amariza21 2 роки тому
Yeah that is what i was thinking. It mite be faster and also will save materials
@jamskinner 2 роки тому
And be much stronger
@spaghettimonter13 2 роки тому
They have been doing exactly what you just asked in the furniture industry for decades. Half the time they don't even cut a Groove in the edge of the plywood
@amariza21 2 роки тому
@@spaghettimonter13 im a finish carpenter and can also make furniture. I would've done with the groove, then use flush router bit to trim the edge. But this furniture came out 👌
@Joeshmofoshoyo Рік тому
Just stumbled upon this clip, glad I did... I'm an instant fan
@wooddiy4k740 2 роки тому
I'm really excited to see your project. On the other hand, your workplace is rich in materials. I like places like this.
@joeymerrell8585 2 роки тому
I thought I had a lot of patience being a wood worker until I started watching your channel and I realized I’m almost as bad as a adhd squirel
Ми - Україна
Переглядів 640 тис.
13News Now
Переглядів 15 млн
Алексей Навальный
Переглядів 2,8 млн
Celal Ünal
Переглядів 8 млн
DANILJWAY (ЗАПИСИ НОМАДА)
Переглядів 18 млн
МАРТИН БОГАТЫРЕВИЧ garage
Переглядів 872 тис.
Loisnake
Переглядів 965 тис.
andrejko_epta
Переглядів 26 млн