MOST POWERFUL ENERGY WEAPON WE'VE EVER MADE!
Переглядів 4,809,444
День томуFor your chance to win $100k and support a great cause, go to www.omaze.com/hacksmith
Check out the circuit diagram at Maker.IO ► www.digikey.com/en/maker/proj...
Check out our new line of underwear! ► www.Hacksmith.store
Become a Hacksmith member get exclusive perks! ► / @thehacksmith
►Early video access
►Project design files (solidworks)
►Merch Discounts
►Collaborate with us on our videos
SOCIAL
Website ► www.hacksmith.tech
Facebook ► / thehacksmith
Instagram ► / thehacksmith
Twitter ► / thehacksmith
TikTok ► / thehacksmith
Patreon ► / thehacksmith
Discord ► discordapp.com/invite/thehack...
Merch ► www.hacksmith.store
CHAPTERS
0:00 INTRO
2:11 HOW IT WORKS
5:00 LET'S BUILD COILS
5:50 POWERING COILS
7:50 BARREL TEST
10:53 NEED A MAGAZINE
11:11 LET'S ASSEMBLE
13:08 MA5 TEST
16:28 WHAT WE LEARNED
17:27 OUTRO
MUSIC CREDITS
Halo Theme (Epic Version) by Samuel Kim
Thanks again Samuel Kim!
/ samuelkimmusic
/ samuelkimmusic
/ samuelkimmusic
Steely Determination by Richard Morson
Licensed from Triple Scoop Music ►
triplescoopmusic.com/
Nordic Grounds by CKM
Licensed from Triple Scoop Music ►
triplescoopmusic.com/
This World Is Yours by Panorama
Licensed from Triple Scoop Music ►
triplescoopmusic.com/
D'accord by Jake Bradford Sharp
Licensed from Triple Scoop Music ►
triplescoopmusic.com/
SOFTWARE:
Project Management ► hey.monday.com/thehacksmith
PCB Design ► www.altium.com/asp/hacksmith
Video Review / Collaboration ► r.frame.io/pZq3N
Video Editing ► Adobe Premiere
CAD ► Solidworks
CAM ► Autodesk HSM bit.ly/HSMworks
CAMERA GEAR:
Highspeed Cam - Chronos 1.4 ► bit.ly/chronosCam
Main shooter - Sony A7siii ► amzn.to/3amVsyN
Main mic - Sennheiser ► amzn.to/32wnHXe
Gimbal - DJI RS 2 ► amzn.to/3v0DFFs
Tripods - Manfrotto 504X ► amzn.to/2QB1Onh
Studio Lights - Nanlite ► amzn.to/3v6iWQr
TOOLS / MACHINES:
CNC Mill - Tormach 1100MX ► hubs.ly/H0B8DWG0
CNC Mill - Tormach PCNC 440 ► hubs.ly/H0B8DYk0
CNC Lathe - Tormach 15L ► hubs.ly/H0B8Gcp0
Autofeed Bandsaw - Tormach AF50 ► hubs.ly/H0B8Gj10
CNC Waterjet Cutter ► bit.ly/wazerJet
CNC Plasma Cutter ► bit.ly/EMTplasma
Phenom Resin 3D printer ► peopoly.net/products/phenom
3D Printer Resin ► siraya.tech/
Super Fast Bambu Lab Ultra Fast 3D Printer ► shareasale.com/r.cfm?b=228215...
3D Scanner ► amzn.to/2pwbvTu
Drills, drivers, grinders, saws, etc ► amzn.to/3x8lZK4
Mig Welder ► amzn.to/3dxFBzk
Tig Welder ► amzn.to/3gmJclN
Quiet Air Compressor ► amzn.to/2P2gOKh
Oscilloscope ► bit.ly/38sOzKw
Multimeters ► bit.ly/2WKwPEQ
Purchases made through some store links may provide some compensation to Hacksmith.
WARNING: THESE VIDEOS ARE FOR ENTERTAINMENT PURPOSES ONLY. PERSONAL USE OF VIDEO CONTENT IS AT YOUR OWN RISK. THE HACKSMITH IS A TRAINED PROFESSIONAL WHO KNOWS EXACTLY WHAT HE'S DOING. EXCEPT WHEN HE DOESN'T. DO NOT ATTEMPT TO RECREATE OR RE-ENACT ANYTHING SHOWN IN THESE VIDEOS.
@theHacksmith 2 роки тому
For your chance to win $100k and support a great cause, go to www.omaze.com/hacksmith
@Villager6883 2 роки тому
Yes sir
@tnterror8085 2 роки тому
Love your videos
@Healthandwealth9422 2 роки тому
Omaze is cancer
@professorgoose7042 2 роки тому
Honkers
@josephbingham6533 2 роки тому
Did the government come knocking at your door saying they need this weapon🤣
@TheRealGuywithoutaMustache 2 роки тому
"It is still the coolest thing I have ever built" You've built a lot of cool things, so that means a lot dude
@cringekiller348 2 роки тому
Verified spammer ✔✔✔✔
@dreamingclouddreams2981 2 роки тому
funny how this guy can post any regular ol' joe comment and it still gets 10k likes
@dggyttggyhgzde1501 2 роки тому
@@cringekiller348 I think they’re just someone who watches videos on UKposts a lot
@CrispyFwy 2 роки тому
@Selmon Bhoi not verified and not a bot
@ninjahunterx7497 2 роки тому
@@cringekiller348 Wrong in both takes.
@1106pang 2 роки тому
That actually looks like something that would be correctly scaled to a spartan, nice work!
@jamawilliams685 2 роки тому
wtf
@Jermain-cz4bh 2 роки тому
@@jamawilliams685 a spartan is a master chief
@JS-kc1tm 2 роки тому
@@Jermain-cz4bh a master chief is a spartan
@randomideas250 2 роки тому
@@JS-kc1tm master spartan is a chief
@Takon_pilot 2 роки тому
@@randomideas250 master chef
@concealedw3ap0n95 Рік тому
I wonder if having thin copper or brass piping with vents along the side of the coils, which would then be filled by high-pressure co2 cartridges after every mag is emptied, would help. The idea behind this is that the co2 comes out extremely cold, and could act as a very quick way to cool down the coils. Alternatively, adding aluminium heat sinks might work
@nebulisnoobis102 3 місяці тому
Wasn’t the point for it to be a purely electrically powered weapon?
@zachow1988 2 роки тому
Canada: we have restrictions on projectiles for homemade weapons. US: Hold my beer.
@2peoples785 Місяць тому
America 🇺🇸
@Memilish 2 роки тому
Man I love Charles, his is just the right blend of simple enthusiasm and ability to casually disregard risks of things catching on fire to progress humanity's knowledge of energy weapons.
@Imaboss8ball 2 роки тому
They don't progress anything. They haven't actually done anything impressive or done any complicated engineering.
@john.dough. 2 роки тому
@@Imaboss8ball ok show me your energy weapon
@justaguycalledjosh 2 роки тому
@@Imaboss8ball people like you are a prime reason why UKposts shouldn't have removed the dislikes.
@Imaboss8ball 2 роки тому
@@john.dough. I don't have one and neither do they. They have a toy.
@XiaoYueMao 2 роки тому
they really haven't progressed anything, the US military made prototypes of just this weapon decades ago, its just impractical and easy to break at such a small scale. the US literally already have large scale rail guns on a couple of their prototype battleships that can level entire buildings lol
@randomgoogleaccount4868 2 роки тому
You break in this warehouse, you’re probably going to see an Iron Man, halo soldiers, rail gun wielding interns, and super-weapons
@amosgodwin3921 2 роки тому
Lol
@Hitlercat233 2 роки тому
If i break in this warehouse i Will die
@JumpinEbin 2 роки тому
And light sabers
@thenewgroundskage864 2 роки тому
Naw you break into that warehouse you gon see god
@mustard_packets_revenge 2 роки тому
@@himanish.b4583 you are right lfamo
@roorahclark5869 Рік тому
genuinely impressed by its fire rate
@Dianasaurthemelonlord7777 Рік тому
The only limitation is how fast you can get the coils to pulse
@meateaw Рік тому
@@Dianasaurthemelonlord7777 and the heat build up in your coils :)
@breadtoast1036 5 місяців тому
i was actually shocked at my own disappointment sadly, its a wonderful project thats complex and hard to do however this type of technology is already at firearm levels this looked and felt like an over sized version of a real coilgun, like it was a nerfed up gun im a little worried at the cost of the project
@BigWheel. Рік тому
I'm genuinely excited for the future of small arms development. There's real companies attempting to make viable hand held rail gun type weapons. Maybe in my lifetime I'll be able to buy one to experience how different it is from regular firearms.
@ozpin8329 2 роки тому
"Due to Canadian laws, we had to make it less powerful than we hoped." I ended up going to the Mythbusters closing tour when they went around the country to promote the final season. Adam said his favorite thing was the water heater explosions they would do at Alameda. He revealed that they had told the FAA that the water heaters wouldn't go higher than 500 ft in the air, when in truth every single one of them cleared over a thousand.
@redsquirrelftw 2 роки тому
You know your water heater experiment is serious when you have to get the FAA involved. lol.
@sniperpaddy3271 2 роки тому
@@redsquirrelftw wait until Elon Musk gets interested.
@tekknorat 2 роки тому
Due to Canadian tyrannic laws, it should be made more powerful, to get through the armored vehicles they use against peaceful protesters.
@chilomine839 2 роки тому
So I'm guessing Canada laws are hard capping how much advancement Hacksmith's "toys" are able to evolve.
@nitroxylictv 2 роки тому
@@tekknorat like the ones in trucks and tractors in all seriousness, fuck canadian laws
@Dismythed 2 роки тому
The thing with bullets is that they are negatively impacted by air resistance, causing them to tumble. But that is because they have no fletchings because in order to produce the explosive resistance necessary to launch a bullet, you need the bullet casing to be flush in the barrel. But gauss weapons do not have that issue. So to produce a proper and accurate gauss gun, you need projectiles with fletchings. They don't need to be big since the projectile is small. I believe you could get away with using 2mm tall feathered wire fletchings. Also, with a pointier tip (even just a ballpoint tip), they could actually break something. This will also take that load off the magnets. (The magnets will do less work.) I suggest slightly skinnier -tungsten- (rather hardened compressed powder steel) projectiles with fletchings and pointed tips.
@ARockyRock 2 роки тому
Boost
@koenv4367 2 роки тому
Prototype V4 coming in 3 years xD
@kaitosound9447 2 роки тому
Dear God I can see the Future where gunpowder is obsolete
@radonsider9692 2 роки тому
Just like an APFS projectile? (I changed it to avoid confusion. Not everyone is into about ground vehicles/projectiles)
@thehighground7732 2 роки тому
@@radonsider9692 all you really need is the fin stabilized part. The discarding sabot could work, but it would be a tradeoff as you would sacrifice magazine capacity and cost by including it, but it could help stabilize the round more in the barrel.
@lightningslayer100 Рік тому
You can really tell on how creative this gun really is. You guys were amazing.
@smmfdftbh Рік тому
Also this is probably one of the coolest channels out there. I love seeing new technology
@jwilliams3170 2 роки тому
I love how at the end you acknowledge the shortcomings but also celebrate just how cool this is. You guys already have something really cool and are on your way to something even cooler
@senavicente 2 роки тому
In 30 years... it will be combatively viable
@juannavarro8497 2 роки тому
"Engineering is hard". So true, as a repair technician who fixes almost everything at component level, I can understand that perfectly. But what you made here is simply amazing! A railgun with this power, capacity and so little (and fixable) flaws is incredible. You guys have built some really crazy stuff, the dream of any nerdy tech guy like me hahah! There's so much fun and potential for projects like this one, so keep it up and strive even higher! This weapon looks so amazing and the way it works is so interesting, a job amazingly done for sure.
@MrCumberlander1 2 роки тому
Coilgun, not railgun.
@veggyking3024 2 роки тому
@@MrCumberlander1 came here to say the same thing coils not rails
@Hellsong89 2 роки тому
Well fixable yes, but little.. potentially but more likely they just didnt show us everything that went wrong just most explodi parts of it.
@ianflanagan8744 Рік тому
Should build a Gauss warthog, those use coil gun tech instead of railgun gun tech. Also you could use the cars alternator, solar panels and thermocouple around the muzzle to recharge the capacitor bank. Additional charging could come from Regenerative braking and piezoelectric in the suspension.
@johnfeistner467 10 місяців тому
Don't forget to toss in a couple wind turbines to get some extra power from the airflow around the vehicle as it moves around the battlefield
@williamstroupe9272 2 роки тому
This is fascinating, the key thing they aren't incorporating is making the bullet spin and rotate with rifling either at the end of the barrel or throughout.
@Built_IRL 2 роки тому
Absolutely brilliant work mate. On top of the base functionality, every part is at such a high level of polish - the magazines, the aesthetic work, the ammo counter, and more. And to think I doubted that you'd even have full-auto!
@mattynek2 2 роки тому
2 checkmarks
@ddevil4980 2 роки тому
That didn't look full auto to me, looked like semiautomatic.
@azbittel 2 роки тому
@@ddevil4980 Give the guy a break, its fully semi automatic at least. About as close as your average politician gets
@thecommenternobodycaresabout 2 роки тому
@@ddevil4980 Are you referencing the "No Full Auto In Building" meme?
@ddevil4980 2 роки тому
@The commenter nobody cares about no. I am saying the "rifle" they made isn't full auto. You said "and to think I doubted that you'd even have tull-auto."
@lynxf 2 роки тому
I love how this kind of destructive genius is directed at something relatively harmless
@JamesTAdams 2 роки тому
We need to put these guys on terraforming/colonization efforts. We’ll be a galactic civilization in a matter of days
@Taha_A 2 роки тому
@@JamesTAdams YES
@styrowrld6770 10 місяців тому
@@JamesTAdams these guys need to be part of the military. Like not fighting, but just creating designs for weaponry.
@jeanremi8384 5 місяців тому
a railgun, which is essencially what this is, is not safe. Still really cool tho
@Nathan-vt1jz 4 місяці тому
He made a prototype railgun… it’s non-lethal at this stage of development, but as he said it’s only his second attempt at a new weapon technology.
@LeviAnimator Рік тому
master chief gives up for the first time reloading his weapon after YEARS 14:05
@MrZebo12 Рік тому
Your guys persistence and attention to detail is INSANE! Seriously it’s very inspiring to me, you’ve inspired me to stay persistent with a lot of projects I’ve done!
@danielfiene7770 2 роки тому
"Building the Coilgun was the easy part. What took us so long was relocating the Hacksmith workshop to our purpose-built artificial island in international waters off the coast of Newfoundland to circumvent Canadian weapon legislation."
@Fluffyudders 2 роки тому
So I just watched this video, and yesterday I watched a video about the first real coilgun prototype being tested. Very interesting to compare the two, as the Hacksmith version looks smaller, lighter, and has a considerably higher rate of fire, whereas the other one is much bulkier but also fires projectiles with power comparable to a real gun. I would love to see what this gun would be capable of without restrictions, mostly because I would be fascinated to see how a Hacksmith weapon would compare with a weapon that's actually had military funding!
@historyhub5389 2 роки тому
When the Canadian government lets you own a laser but not a decently powered coilgun
@grahamnombit3024 2 роки тому
You go to USA
@Han_Solo6712 2 роки тому
If they didn’t have the restrictions Canada would hire them as a weapons manufacturer.
@bxvin9788 2 роки тому
what is the video?
@Donotcare202 Рік тому
@@historyhub5389 lol fac
@mattblack7707 2 роки тому
this could easily be one of the coolest projects they have done.
@sakejmithfilms7687 2 роки тому
This is the first video I've seen of y'all. LOVE it and I'm excited to explore your channel!! +1 subscriber lol
@Wolfencreek 2 роки тому
Canada: Lets Hacksmith Industries build a Mech Also Canada: "No Magnet Guns for you!"
@jackv2054 2 роки тому
Thank Trudeau
@gnat5166 2 роки тому
Gotta love Canadian gun laws lol
@darkrootox 2 роки тому
Next thing you know they'll be taking our trucks away
@kerradeph 2 роки тому
@@jackv2054 The firearms manufacturing laws have been in place WAY before Trudeau was in office.
@t.c.b4722 2 роки тому
@@darkrootox A truck travelling at speed has far more joules of energy, so yep.
@retrosoul- 2 роки тому
Charles REALLY has that mad genius look in his eyes the whole time while developing this thing. Pretty sure he would have just built it for free if given the parts lmao.
@ateslabattery115 2 роки тому
any sane engineer would
@jellafella6957 2 роки тому
Engineer's are fueled by stimulants and the pure joy of something working correctly. Lock one in a room with all the parts to something and they'll probably finish it before trying to get out.
@reythjohnson5415 2 роки тому
And he sounds like Ben Stiller too!
@vikingoperator9873 Рік тому
If you want projectile stability, either introduce rifling or make APFSDS rounds for it.
@jeremiahbullfrog1844 Рік тому
THE CHUCKY DOLL WITH "where is your chuck key?".... IM DYING!!!
@avitavalin5936 2 роки тому
I think the only thing that would really improve this aside from just increasing power would be adding rifling or a type of fletching on the ammunition to keep it from tumbling. It would be way more accurate
@xavierx354 2 роки тому
you can stabilize it with fins
@cipher0325 2 роки тому
So sort of like a sabot round
@TheAshran 2 роки тому
use flechettes, and maybe have a small capacitor bank connected to a magazine rail so you can use a mini railgun to accelerate the proyectile into the coils. Tho I dont know of a capacitor small enough and still have enough juice to be useful for that. Hmmm.
@FactoryofRedstone 2 роки тому
@@TheAshran You can't really mix rail guns and coil guns, because one needs a ferromagnetic projectile and the other won't work with a ferromagnetic one. If you want to pre-accelerate the projectile I would recommend a linear electric motor. Also building a proper rifled barrel that runs the full length of the gun, maybe out of fiberglass or carbon, so that it doesn't interfere with the magnetic field too much would really improve the accuracy. Making fins is also an idea, but difficult, as they need to fit in the mag and through the barrel.
@cipher0325 2 роки тому
@@TheAshran at that point it would just be simpler and cheaper to make the railgun bigger and more powerful
@GENcELL2014 2 роки тому
I'd recommend potting the coils in a thermal resin and using a battery that is in parallel with an ultracapacitor bank, oh and do a build in the US so you aren't limited on power 😅
@darrenshepherd3984 2 роки тому
I didn't understand a word until the emoji but your probably right. Everyone seems way smarter than me nowadays.😀
@Andrew-th8jk 2 роки тому
The last part is so true. They basically built a unique pellet gun.
@foxracerdrew 2 роки тому
I bet demolition ranch would love to do that collab.
@ZigaZagu 2 роки тому
>do a build in the US so you aren't limited on power That's fucked
@GENcELL2014 2 роки тому
@@ZigaZagu Why? If they can make it actually powerful here(US), than why not? I'd be interested to see how capable they can make one instead of being forced to tone it down because of Canadian laws.
@Salty_Gacha_Gamer Рік тому
All it needs is the tube from 2019 model but with rifling, idk what material other than steel can handle all that friction but maybe rifling wouldn't help anyways since its main use case is giving a right pathway for all those gases propelling the projectile forward which in this case is propelled just by the turning on and off coils. This is just me nerding out but I'm not sure if the rifling would be entirely pointless tho since it does help reduce the energy loss which in an otherwise straight barrel the projectile would be bouncing around all over. Maybe a combination of airgun type pressurized gas with the coils would help in simulating how a real gun powder based gun works(but would be really hard to perfect since the pressurized gases depending on what gas is used will mess up the timing for coils turning on and off and would require extensive simulations just to bring it to an acceptable margin of error which is still not perfect). It's a long winded way to make something which already works but ig it does take away the danger element of gun powder. Not that it would make it any less dangerous but I would like to see something along of the lines of whatever I said before created(since I don't have the finances or patience to build it)
@masonchampion3491 Рік тому
I would like to see y’all come to the USA and build one with out any predetermined limitations holding back the full potential of what this stroke of genuine genius could be.
@colbyboucher6391 2 роки тому
"Technology has advanced to the point where using any sort of black powder or explosive fuel seems downright silly" And yet in Halo the UNSC still uses 7.62 for some reason.
@absalomdraconis 2 роки тому
Because batteries turn out to be even sillier.
@colbyboucher6391 2 роки тому
@@absalomdraconis Yeah, but I've heard some gun nuts say that there's a reason the cartridge is less and less prominent even now.
@FaceFish9 2 роки тому
@@colbyboucher6391 i mean they use very weird ammo for tanks aswell, best one can give as an explanation is that they found out a way to make the stopping power of 7.62 be better against the Covenant than the 5.56, that or it is much more easily manifactured in that universe, no other reasons i could come up with, but for the tank ammo.. yeah they use 90mm-105mm Tungsten rounds, 90mm HE in all but Halo 5, where the Scorpion was upgraded to shoot 150mm rounds from a electrothermal-chemical smoothbore cannon and even had a older style 90mm HE cannons fitted in it, and had some "electro" weapon in works the tank also goes only about 60-95km/h so it's not exactly amazingly fast or nimble for a 66ton or so tank of that era. so 7.62 isn't even the weirdest i've seen them in Halo universe, 90mm HE for anti-armor purposes is... yeah..
@Kai_Keller02 2 роки тому
They also use 10 Guage shotgun munitions I stand corrected its even more ridiculous its 8 Guage
@2Potates 2 роки тому
@@Kai_Keller02 8 gauge actually
@billysalord5463 2 роки тому
imagine a large scale version of this on the power loader
@maxryan3888 2 роки тому
next video. we weaponised the power loader.
@extivus406 2 роки тому
Canadian law says nay
@BremenSA 2 роки тому
@@extivus406 I'm sure they could build the parts and head south for assembly and filming! I'm reliably informed by the internet everything is legal in the US.
@loganburrell2941 2 роки тому
@@extivus406 just don’t listen to the law
@outbreakperfected5704 2 роки тому
We created Pacific Rim in real life
@somerandomdragonidk7852 2 роки тому
ngl watching him wrap the coils is super satisfying.
@haire618 Рік тому
I'm telling you guys y'all are doing a great job the way y'all produce this and explain stuff and say stuff everything else the camera man I mean everybody involved and getting this all set up y'all are doing absolutely amazing job this stuff is better than what you see on ABC and the big networks congratulations y'all . Y'all are doing great God bless you
@wskinnyodden 2 роки тому
You need two sizes of coils so you can overlap them instead of having areas without magnetic field, like a slightly wider tube partially covering the end and beginning of the coils it's between. That should help.
@johndododoe1411 2 роки тому
Not necessary, though narrower segments (like 26 half width) and turning on the next coil earlier to make the pull stronger. More tumbling can be fixed with a smooth plastic barrel passing through all the coils as a single piece. Removing projectiles from the mag should be done magnetically, not with springs.
@TheScarvig 2 роки тому
@@johndododoe1411 i was under the impression that the loading piston was actuated by a solenoid...
@johndododoe1411 2 роки тому
@@TheScarvig The magazine uses the spring system like in normal guns.
@lonzo344 2 роки тому
@@johndododoe1411 The springs in the mag push the rounds upwards, where a piston then shoves them into the barrel. Even in normal firearms, the springs in the mag do not remove the cartridges- they push the rounds to where the bolt can pick them up and shove them into position.
@viralexplosion3449 2 роки тому
while all of u wer discussing this, i was seeing how i cud pronounce his name
@Mr.Engine993 2 роки тому
I've not seen anyone so happy with their invention even though it's not entirely perfect. Charles brightened my day with his excitement!
@AdamantAlex 2 роки тому
Even better, it is actually a bull-pup like the real thing! Amazing job on the accuracy!
@NoThanks-qp2ej 9 місяців тому
I can't wait to see one of these coilguns where the rounds don't tumble in mid air. Would it be possible to implement some form of rifling?
@rayk1544 2 роки тому
I thought it looked a little low power for the theoretical abilities you could get from such a system. Only 5J of energy and such a low muzzle velocity restriction definitely is rough for such a project, though it did look very good. Maybe one day you guys can do a V3 build in the states where you don't need to worry about the same restrictions limiting how overkill you can go on the design. Best of luck on your future projects and progressing this design even further if you have the desire to.
@aurigo_tech 2 роки тому
152 m/s is still a lot, faster than even the fastest modern crossbows. 5 J is not a lot, but even that can do quite a lot. I think they need to decrease projectile weight to only 1 or 2 gramms.
@Nick-sx6jm 2 роки тому
@@kairi4640 Considering they probably live close to toronto or montreal they could just set something up in Michigan or Vermont and have it only be like an hour or two drive. Its legal everywhere in the US to build firearms at home with no need to inform the gov or any permits.
@Kaiwalski 2 роки тому
@@Nick-sx6jm as god intended 😎
@Nick-sx6jm 2 роки тому
@@Kaiwalski Once the NFA, ATF, and GCA are repealed and some federal reciprocity laws are put in place then it will be as God intended.
@zacksram 2 роки тому
@@Nick-sx6jm bruh
@hansiminator69 2 роки тому
This Halo-Thing is getting way better than I even thought! Great job!
@theboydiego5528 2 роки тому
I love Halo
@garyguiton93 2 роки тому
I have a question let's say that you are able to upscale that same design but on a 5000% increase as make it bigger wouldn't that make space travel a lot more fuel efficient?
@3xblahblah 3 місяці тому
One thing I've wondered, watching this and other similar videos, could you make conical coils so they could partly overlap? Would multiple coils being energised produce a magnetic field as if they were one coil?
@KellenChase 2 роки тому
Fascinating. Came here from the “forgotten weapons” arcflash video. Looks like they used a bull pup design with a gap between the accelerator cascade and a… feeder accelerator. You mentioned not being able to feed them fast enough (initial velocity required into the cascade). I think that gap is how they are achieving that.
@Ifinallybeatmastermodeftwyey Рік тому
I got here because of the stormbreaker vid.
@an0rak27 Рік тому
Would adding vents along the top or bottom of the pieces by the coils or a liquid cooling system under the 3D printed parts help reduce the heat problem?
@kinrath1987 10 місяців тому
I love how they crammed hundreds of hours of engineering work into an 18 minute video
@kerradeph 2 роки тому
Have you guys considered working with someone that has a firearms manufacturing license to build something beyond what Canadian laws would allow the normal person to make? It would be cool to see what you could come up with when not being limited by projectile energy laws.
@spacebound1969 2 роки тому
Good old Canadia, can't even build a damn airgun without the glowies trying to lock you up.
@Owy. 2 роки тому
@@spacebound1969 I mean it's a lot safer to live here then it is in the USA where everyone own guns so we don't mind it to much at all
@5002strokeforever 2 роки тому
@@Owy. any constitutional carry state is safer than Canada...
@Owy. 2 роки тому
@@5002strokeforever you don't need a gun to be safe you just think you do
@Bobbias 2 роки тому
@@Owy. I believe we actually own more firearms per capita than the US does. It's just that most of our guns are actually used for hunting or target shooting rather than killing people.
@poofpoof9940 2 роки тому
My only sadness in this video was knowing the whole time theres already a waayyy more powerful commercially available version, but considering the legal constraints yall have come up with an amazibg alternative, and knowing you guys i immagine this thing is capable of being turned up a few notches 😅
@llamanodrama5432 2 роки тому
I remember a Demolition ranch video showing a small sized railgun which fires coin like projectiles 4 months ago
@asterosthegreat8587 2 роки тому
@@llamanodrama5432 Demolition ranch is in America though. So there is the biggest difference.
@MrKaiyooo 2 роки тому
The main point is changing some sequencing maths and increasing the electricity.
@izayaorihara7059 2 роки тому
Gib link
@bananageneral5217 2 роки тому
There doing this within those restrictions so imagine if they could make it as powerful as they wanted
@Xanderviceory Рік тому
Question: If you could bring the projectile up to say 500fps at the first coil with some mechanical means would the coils continue to increase its velocity 500fps higher than its usual shot? I'm thinking a hybrid centrifugal accelerator as a feed mechanism feeding the rounds into the magnetic accelerator
@Xanderviceory Рік тому
I've been trying to build a centrifugal launcher and theres a pretty hard limit for its speed, but lower powered as a feeder for this mag gun might help make it even more powerful?
@RolandKontson Рік тому
Besides bulling the projectile with a coil are you also pushing them with the previous coil?
@alexpegram1537 2 роки тому
I always like how they say, “Getting pretty heavy.” I’m like “Have you seen the guys who carry these weapons.”
@chineseripoffofgod5210 2 роки тому
Spartans can flip a tank, i'm not sure that a "pretty heavy" rifle is their biggest concern xd
@areus2016 2 роки тому
lol spartans treat .50s like they are nerf guns, weight ain't an issue
@ArticJane 2 роки тому
No matter how many different styles of railgun I see various UKpostsrs build over the years, I'm always happy to see them as they tend to be pretty heckin awesome. That and you guys rarely fail to make items that are amazing to look at and cool :D
@kreigguardsman3355 2 роки тому
Makes you wonder why we don’t use them more in the military
@Slye_Fox 2 роки тому
This is a coilgun not a railgun.
@lucaswinsor4469 2 роки тому
@@kreigguardsman3355 for exactly the reasons this video detailed. They're big, heavy, and cumbersome. They're unreliable. They require an inordinate amount of electricity to accelerate projectiles to lethal velocity. And honestly, Gunpowder based weapons are just better, in every possible way. The only time a rail/coil gun is better than a conventional gun is when we reach the ludicrous sizes involved in artillery, at which point the magnetic accelerator can actually impart similar force over the length of the barrel when you compare it to a gunpowder weapon of the same size.
@lucaswinsor4469 2 роки тому
@@blise518B There may be very few moving parts, but electrical components still fail. The Ammunition may be cheap, but the firing mechanism and construction of the weapon itself are not. And there are no superconductors that can handle the heat things like this produce. Still, none of that is the main issue. out of everything I said, power/portability ratio is the most important problem. You just can't pack enough juice into one of these things to rival gunpowder weapons and still maintain a portable size. Electrical work has improved over the years, yes, but it's not on that level.
@rockyroadmagic4152 2 роки тому
@@kreigguardsman3355 gunpowder weapons: cheap, mass produced, reliable, tough, simple, compact, works 24/7 as long as you have ammo which is cheap and mass produced coilgun (at least as shown in this prototype and most likely for others for at least the next few years): enormous, heavy, expensive, probably pretty delicate and would break if you dropped it or it rained or literally any weather event, doesn't have nearly as much power, requires electricity which you might not have enough of in the middle of some shithole jungle or desert to charge a hundred guns at a time (and if you did you would still leave a good portion of the troops weaponless for hours at a time) like the original commenter said. pretty heckin awesome and amazing to look at and cool. that's it. they're not supposed to be actual things you would use irl
@motonation6488 Рік тому
This guy is a real g for spending years to build this
@NoNo-ky9vi Рік тому
You're also getting the projectial tumbling. The why modern guns over this is with rifling. Rifling allows the spin about length wise axis. Without a means get the projectile rotating the projectile will need to balanced over a 360 degree plane. To help lower the weight the increase in the power of the solenoid to hit the projectile faster. Another option is a pressured gas (not as stable and could lead to wide range of starting speeds.) But by increasing the first coil speed you could get a faster speed (but Canada says no) or to maintain current speed lower the amount coils needed.
@mustafakhan6308 2 роки тому
I've been watching this channel since 2016 and how large they've scales their projects,equipment,and quality is truly incredible
@pritampatra1595 2 роки тому
Reduce the number of turns and use more thicker gauge copper wire as u move upward in the coil assembly in the rail gun... It will cause the projectile to move more quicker per coil sets...
@lordhelix3252 2 роки тому
they mentioned they had to limit the projectile speed for legal reasons, but this would be awesome
@Paragon643 2 роки тому
as they mentioned they are legally limited to how good it's allowed to work. I have some ideas on how to get it super sonic as i'm sure they do as well but they ain't allowed to sadly. Aka it's a bit of a toy just cause they ain't allowed to make it scary
@Spartan-Ben-204 2 роки тому
Also spin stabilisation or more aerodynamic bullets would be good its keyholeing pretty badly
@shamarerskine3987 2 роки тому
@@lordhelix3252 bro that law is bullshit tho
@lordhelix3252 2 роки тому
@@shamarerskine3987 doesnt mean they can break it, laws are laws even if you thinj theyre stupid. They arent gonna broadcast themselves commiting a crime to millions of people on youtube
@ValidVoid Рік тому
I’m a little curious how well it would works if the coils were cooled beforehand. I saw something about super cooled magnetics, what would be an effective and safe for the user way to have super cooled the coils?
@Beast_Marrow Рік тому
You could probably install a secondary circuit on either side of the rifle with a set of PC fans to help cool the coils a little bit or maybe a system to blow highly pressurized air over them. of course I doubt it would fully overcome the overheating problem but might be a start.
@dan725 2 роки тому
Hmm for the next one, try having the batteries in the rear. Usually when I go target shooting, I place weights on the stock to offset the weight of the barrel, so it makes handling the rifle a lot easier. This looks very front heavy! Still VERY cool!
@DonnyStanley 2 роки тому
Some sort of combo cartridge that houses a battery and a rail magazine may be the best idea, you can store both in rear, and you get a fresh battery every time you reload ammo.
@zachsuedmeyer2526 2 роки тому
I was thinking that, for the time being, you could make straight up kevlar body armor and hide batteries in there. idk if that is viable though
@oreoicecream1829 2 роки тому
If this people have the budget of America's military they would probably recreate halo irl
@alistairmooncrest5018 2 роки тому
Charles has that mad look in his eyes that is absolutely required for something this awesome, yet clearly, frustratingly complex. I like his demeanor. 10/10 would trust my sci-fi guns to.
@bonolio 2 роки тому
Would seriously watch a whole Charles Channel
@codeomatic4351 2 роки тому
I like the guy , but the gun was pretty lame. They have built much more better and cooler stuff. This gun was just an evolved form an automatic nerf gun. Like brooooo , it could not get through a gummy bear. I expected it to be at the power of almost a real gun.
@alistairmooncrest5018 2 роки тому
@@codeomatic4351 They literally explained why they couldn't do that. Because of Canadian law. He's a prominent figure with these *public* videos and doesn't want problems with their law enforcement. And "engineering is hard." Esp. custom engineering.
@moxxitty Рік тому
This is very well made, however I feel that the MA5 Halo assault rifle would be replicated in an airsoft like fashion as the platform is more expandable, You guys did awesome with this replica and i hope to see more like it, keep up the good work!!!
@Breakneck-C4 Рік тому
this looks amazing! after waching him shooting that m5 looks like he would have fun shooting a Ak or a AR15 or something
@electronicsNmore 2 роки тому
Excellent build! Anti-climax is something you don't want. LOL
@8DVIBEZ 2 роки тому
Lol
@DespaceMan 2 роки тому
hahaha yep with $2 I can make something 100 X more powerful than that with some rubber bands. As for the technical aspect great work :)
@jacobkeltz3584 2 роки тому
In addition to the tube to increase efficiency, you could make the magazine double-stacked since more projectiles=more fun
@innacrisis6991 2 роки тому
Problem is that might introduce some feed/reliability issues, considering it's already on the shadier end
@Bill_DeBerry 2 роки тому
Designing a double stacked magazine from scratch would take a while as well. Factor in reliability issues from the magazine with the reliability issues with feeding in general and you might get lucky to be able to feed one full mag out of every 30 or so without a jam. There is a reason why most firearms use the same magazines as their competitors, and that is design cost and tooling to manufacture the new design.
@jacobkeltz3584 2 роки тому
@@Bill_DeBerry ah yes, making an automatic coilgun definitely didn't take any time at all. Furthermore, I don't know what type of firearms you are looking at, but most rifles and pistols I've handled use different (generally double-stacked except in older/subcompact guns like the 1911 or glock 43) magazines from one another. Also, its not like they couldn't do the research into what makes a good double-stack mag. It's pretty clear these guys do a lot of homework for their builds.
@innacrisis6991 2 роки тому
@@jacobkeltz3584 That's true, but it's also clear their builds are mainly meant to be fun demonstrations of a concept being executed and not actually viable tools/weapons in their current state. A double-stack mag would be an unnecessary complication, one that an actual weapon would definitely have reason to overcome for the extra capacity, but one that provides a pretty minor increase in entertainment value for the effort it takes. Also I think when @Bill DeBerry was talking about magazine compatibility he was referring to glock and stanag mags being used across a wide variety of firearms, though of course that's not gonna be everything in the same caliber.
@babycarrotz32 Рік тому
could it be possible to rifle the barrel on the gun so the projectiles spin giving the,mbetter stability?
@calebjohnstonshb 2 роки тому
Can't wait for a fully electronic weapon with no projectiles - just pure energy
@Electirc 2 роки тому
This is literally the coolest thing ever. I literally have started trying to get into engineering recently because of these u guys. One day I might want to work at hacksmith lmaooo
@boogaboogatips5943 2 роки тому
Follow your dreams
@assassinlexx1993 2 роки тому
Could a out of country gun be built plus use a steel/ plastic projectile?
@TheBlackstarrt 2 роки тому
What's interesting is that we eventually can have smaller rounds that go further and impact harder than conventional cartridges.
@willb5278 2 роки тому
Hello overpenetration! Smaller +faster = its own set of problems.
@TheBlackstarrt 2 роки тому
@@willb5278 Don't put logic into my fantasy! That would be a problem though, wouldn't it, lol.
@heramaaroricon4738 2 роки тому
@@willb5278 Idk, Overpenetration sounds like a good feature for a gun designed to kill aggressive Aliens...
@willb5278 2 роки тому
@@heramaaroricon4738 Nope, overpenetration is when the projectile travels *through* your target. Putting a small hole in them, and a larger hole in the wall/ground behind them. Damage takes energy, heating, burning, moving or ripping stuff takes Joules. A projectile that's too good at penetration will do surprisingly little damage to your target as it deposits most of its energy into whatever's behind them. Considering people can survive having a limb blown off, sometimes you need to make a big hole to stop someone. The ideal projectile doesn't blast through the target, it hits em, then sticks in them. Depositing all its kinetic energy into the said target.
@DatChinchilla 2 роки тому
@@willb5278 Could throw a micro explosive that's detonated upon impact and call it a day tbh, although then your cost per round and risk of misfiring shoot up a lot more.
@BurntyToast Рік тому
suggest making an easy switch jig for the power :) always such a hassle to unplug those silly connectors when you see the magic smoke
@devilemperor6668 Рік тому
Amazingly Brilliant people like You , Your Team and Others around the Create and Innovate such Mind Blowing Things which the US and other Countries Govt. Can't get made even in Billions of Dollars spendin... Yeah One Thing Is For Sure 50% of that money goes to everyone under the table... Love all your Creations and Innovations bro... GOD bless you , your team and your families with lots of love and happiness and with good health and wealth... Keep Up The Best Works... Keep It Comin...
@Ghost_4576 2 роки тому
Wouldn't the energy loss be averted by having a thin tube within the barrel that isn't affected by the magnetic field? Other than that, looks cool af.
@jrasiy4048 2 роки тому
I wouldn't imagine much materials being able to withstand a metal rod rubbing against it at high speeds
@richardmillhousenixon 2 роки тому
@@jrasiy4048 Teflon
@Shrouded_reaper 2 роки тому
@@jrasiy4048 if it's rifled there should be no contact at all.
@Ghost_4576 2 роки тому
@@jrasiy4048 Just use aluminum, like with the main body, (or something with a higher melting point) there are lots of non magnetic metals that could work
@ckl9390 2 роки тому
That might make it a firearm, so it may not be worth it for legal reasons.
@Kaelisk 2 роки тому
This was really well done! Love it! "It's probably way faster and more fun to plug them in and see if they explode" - electroboom would be proud
@jihanzayed8621 Рік тому
The military has to hire this guy
@alteratio1978 2 роки тому
I love how they actually showed the trial & error in this
@drdoll1 2 роки тому
Theoretically, how quickly do you think you could propel the projectile without the 152.4 meters/sec and 5.7 joule limitations? I wonder how much kinetic energy a hand held rail gun could generate in comparison to a traditional firearm of any given caliber. Thank you for doing this! I very much enjoyed watching your work. :)
@lonereaper4287 2 роки тому
you also gotta take into account the projectile used, its a rounded small probably steel rod, were they not under legal obligation, i'd expect it could do considerable damage. simply by making the projectile pointed and finned, both increasing stability of it in flight as well as overall kinetic impact, Smaller point of impact greater focus of energy, making for a greater penetration capability. overall it would be interesting albeit unwieldy and impractical. but an interesting thought nonthless, it wouldn't be ground breaking innovation but definitely an interesting and unique weapon.
@alexeipistoun9783 2 роки тому
There’s a company producing them check out forgotten weapons for their video but they got it to be comparable to a .22lr round
@Synthc4t 2 роки тому
@@alexeipistoun9783 we're getting closer to greatness
@Khornedevotee 2 роки тому
@@Synthc4t Soon enough, hand held proper energy weapons for soldiers(laser weapons more specifically), then, we form the Empire of Man, and carry ourselves out among the stars and beyond. :O
@teslagamer24 2 роки тому
@@Khornedevotee FOR THE EMPEROR!
@callmeowen 2 роки тому
"Today, Charles and I sail out to international waters to create a fully-functional nuclear-powered railgun"
@iatemyhamster2501 2 роки тому
Jesus Christ the DEDICATION to this is just mind boggling great job... NO AMAZING JOB just WOW
@sumalsebastian Рік тому
that is a real achievement for your entire team.
@NathanBonsal 2 роки тому
FyI since projectile speed is increasing with each coil, you need to make each coil shorter for shorter pulse duration and higher current, due to the decrease in projectile field duration. This should also mean each coil operates at a higher voltage, so the magnetic field switches faster and to a higher value. If each coil was just 10 percent shorter than the previous one, it would increase your efficiency by a LOT. You can also switch from one polarity with a big cap to the opposite polarity from a smaller cap, to force field collapse when you need to transit out of the coil into the next one. The projectile's field will still be present and you can push it out while the next coil pulls. The caps for this can be really small in value, like 10 percent or less that of the pull capacitor, because their only purpose is to reverse the field.
@dnxx503 2 роки тому
Yes that makes sense also you need to 4x5 then (-65)+56=
@maxk4324 2 роки тому
Barrel improvement idea: same thing you have here, except print the black coil frames/barrel segments with 100% infill (at least around the hole) and purposefully make the bore size too small. Assemble to the point of rigidity, then reem out (*cough* get a hydraulic ram and a rifling button set *cough*) the barrel to the correct size. You now have a segmented yet contiguous barrel (until you disassemble it at least). I would recommend using the strongest and hardest plastic you are able to print for this one.
@kryptos4812 2 роки тому
NEEEEEEERRD
@maxk4324 2 роки тому
@@kryptos4812 Damn straight!
@charlesholtforster9651 Рік тому
Hey Max, This is certainly worth attempting next time i get a chance to build one!
@wilburwilliams36 Рік тому
When you think about it, it's truly amazing the amount of things we can make with 3D printers. We could probably print an entire aircraft or something!
@pigboiii Рік тому
Now you just need to somehow induce a spin to stabalise the projectile. In some of the slowmo shots you can see the projectiles have rotated so they dont hit right on.
@tacomaastro7462 2 роки тому
Have you thought about taking advantage of the coil collapse energy to forward charge capacitors to boost the next coil in succession. Maybe a tripod mounted version.
@s.sradon9782 Рік тому
I'm curious, do you mean the back EMF? I thought ideally there would be little energy left around the inductor as the magnetic field collapses when the core (bolt) absorbs the energy and converts it to kinetic but that would be impractical since you can't calibrate the driver timing perfectly I'd imagine? Or are you talking of something completely different? Please elaborate.
@omni0414 2 роки тому
you guys were my inspiration to get into engineering, thank you for everything on this site truly
@jaywatson6524 2 роки тому
Notice the 117 likes. I can’t like this comment as I want to preserve it
@willowsthecat4855 9 місяців тому
love you guys this is the best coil gun made by you guys!!!!! also how hot did the coils get?
@yourstrulylocal3673 Рік тому
I was gonna say, a neat idea for projectiles would be to machine actual flechettes or darts using. Might be a little time consuming, but they would fly better. I dunno how well they'd feed through a magazine though
@bilboproudfoot 2 роки тому
Yea, I can see why you hired him. Clean and tidy build, very well done.
@RustyDust101 2 роки тому
Isn't it amazing how 'In The Hall of the Mountain King' by Edvard Grieg always makes construction montages seem so much more epic?
@elliottszarowski695 2 роки тому
Very cool, but could you use the same tack to make a ma5 thAt could be used in airsoft or paint ball?
@foteinipsillaki9218 10 місяців тому
You guys are so good that the military is going to hire you to make weapons for them. Keep up the good work.
@jtbonilla7745 2 роки тому
"why should we hire you" Mini rail gun "You start on Monday" Best skit ever.
@JoshuaWilliams-oy9rw 2 роки тому
This was a really cool project. It would’ve been cool to see a covenant weapon for this, seeing as the Ma5 uses actual ammunition, but really cool to see still.
@terraplays7424 2 роки тому
man makes military grade superweapons as a hobby
@raveeshgupta7056 Рік тому
Why don't you make a circular accelerator to speed it up even more and then shoot it through the tangent
@radarguy 2 роки тому
Do you do any form of waveform control on the coils? It would seem that it may be possible to control the fields so that all coils could contribute. It also looks like it is running open loop but if one were to sense the field and the disruption of the projectile running through the field more control would be possible. Once that was done, more shorter coils with finer control could be considered to maximize efficiency and energy transfer. Not sure of the potential gains but it would make for an interesting trade off study.
@mandowithfullbeskarbolter 2 роки тому
I love how you guys makes all those things, this makes me so exited to try build something my self! But I still need to learn more things about physic and mechanic in engineering first
@arthm1608 8 місяців тому
Looks like you guys used the concept of a particle accelerator. To make it small maybe you guys can go for a circular design which shifts to shoot tangentially.
@stuartodell1709 10 місяців тому
I think the different segments also makes for slight miss-alignments too. BUT it is still COOL!!!
Євробачення Україна | Eurovision Ukraine official
Переглядів 306 тис.
MaviGadget
Переглядів 1,9 млн
MaviGadget
Переглядів 1,9 млн