My Top 5 Arduino Displays

  Переглядів 217,575

InterlinkKnight

InterlinkKnight

6 років тому

I show my favorite displays to use with arduino, from simple and small monochrome displays to big color displays with touch screen. Sponsored by JLCPCB - $2 for PCBs & Free Shipping for First Order jlcpcb.com
Over the years I've tried many displays and I always return to only a few of them to use in my arduino projects. It can be confusing to choose the correct display to buy so on this video I talk about the best displays I've tried so far to use with arduino.
I made video tutorials for my top 5 displays:
1. OLED 0.96" I2C Tutorial: • Arduino Tutorial: OLED...
2. LCD Nokia 5110 Tutorial: • Arduino Tutorial: LCD ...
3. TFT 1.8" ST7735 Tutorial: • Arduino Tutorial: 1.8"...
4. TFT 2.4" ILI9341 Tutorial: • Arduino Tutorial: 2.4"...
5. Nextion Display Tutorial: • Nextion+Arduino Tutorial
Components:
- OLED 0.96" I2C: amzn.to/2UNDCLO
- Nokia 5110: amzn.to/2NXSrs9
- 1.8" TFT ST7735: amzn.to/2OgXjIs
- 2.4" TFT ILI9341: amzn.to/2YZzkT6
- Nextion 3.5" Enhanced: amzn.to/3qMfjTd
- Arduino nano: amzn.to/3iru0op
Recommended Tools:
- Electronic Parts Tester (ESR LCR-T4): amzn.to/2QvQJlP
- Breadboard (good quality): amzn.to/2QsyY3C
- Storage Case for Jumper Wire: www.walmart.com/ip/The-Hillma...
- Multimeter (Fluke 17B+): amzn.to/2L3PNQk
- Rigol DS1054Z Digital Oscilloscope: amzn.to/2C5ZwD7
Note: As an Amazon Associate I earn from qualifying purchases.
For the other displays that I show on the video, but that are not in my top 5, I don't have video tutorials but here I upload my example scketches that you can use to learn how to use them:
- VGA Monitor: drive.google.com/open?id=1Az4...
- LED 7-Segment 4-Digits with TM1637 driver: drive.google.com/open?id=1zfZ...
- LCD 128x64 SPI with ST7920 driver: drive.google.com/open?id=1Ac4...
- LED 7-Segment 8-Digits with Max7219 driver: drive.google.com/open?id=1FQD...
- LCD 16x2 with I2C adapter: drive.google.com/open?id=1CYM...
- LED 8x8 Matrix with Max7219 driver: drive.google.com/open?id=1wfd...
Website: www.interlinkknight.com/
Patreon: / interlinkknight

КОМЕНТАРІ: 310
@gwtomsic
@gwtomsic 3 роки тому
Excellent! You are a natural teacher. Spot on, well paced, good summaries, perfect.
@interlinkknight
@interlinkknight 3 роки тому
Aww. You are so kind. Thank you :)
@bretharrell9795
@bretharrell9795 5 років тому
thank you for taking the time to share this information! Very helpful
@yangallison505
@yangallison505 3 роки тому
Hello, this is Allison from Beijing DWIN Technology from China. We are the manufacturer of Android screen, touch panel, Smart LCD display. And we specialize in this field for 17 years. We hope to get in touch with you. If you are interested, you can contact me through email:yangxi1@dwin.com.cn.
@joshua01793
@joshua01793 3 роки тому
just want to say thanks, you saved me hours of research.
@msayed6189
@msayed6189 5 років тому
Very Useful video, Thanks for your time & effort to help us with this great work
@nrdesign1991
@nrdesign1991 3 роки тому
That's an impressive collection of displays
@yangallison505
@yangallison505 3 роки тому
Hello, this is Allison from Beijing DWIN Technology from China. We are the manufacturer of Android screen, touch panel, Smart LCD display. And we specialize in this field for 17 years. We hope to get in touch with you. If you are interested, you can contact me through email:yangxi1@dwin.com.cn.
@zikermu
@zikermu 4 роки тому
Great . Thank you very much for this great detailed presentation. You have done a great job that makes our lives easier.
@yangallison505
@yangallison505 3 роки тому
Hello, this is Allison from Beijing DWIN Technology from China. We are the manufacturer of Android screen, touch panel, Smart LCD display. And we specialize in this field for 17 years. We hope to get in touch with you. If you are interested, you can contact me through email:yangxi1@dwin.com.cn.
@thecombatengineer7069
@thecombatengineer7069 6 років тому
Awesome man, thank you! I am doing something similar. I have the OLED, 0x9488, and Nextion 3.5 Advanced... I love the HFX_8357 Lib for the TFts.
@interlinkknight
@interlinkknight 6 років тому
I am not familiar with the 0x9488 and HFX_8357 displays. What kind of display are they?
@justinw.2376
@justinw.2376 2 роки тому
I can’t believe how much the price has increased with the Nextion displays. I tried incorporating one into my project, but with how unintuitive their proprietary editor software is, the cost doesn’t outweigh any benefits. So I went back to the tft 2.8” route since I already knew how to program that, and didn’t feel the need to try understanding another display.
@yuchoy1
@yuchoy1 6 років тому
Excellent video! Thanks for sharing!
@jamesleehunter
@jamesleehunter 5 років тому
Thank you. A similar video for Rpi displays would be amazing.
@JaroslavSykora
@JaroslavSykora 5 років тому
Didn't know about Nextion. It really looks gorgeous and proffesional, and not so expensive considering the capabilities. Will definitely consider. Thanks!
@interlinkknight
@interlinkknight 5 років тому
Thanks for sharing. Yeah, the nextion display also changed the way I do my projects. Opens many possibilities that arduino can't handle itself. BTW, the RTC included in the enhanced version of the nextion display are very bad. I would use the RTC DS3231 module for arduino instead. More details on my video tutorial #3
@tusharunjha
@tusharunjha 5 років тому
Very useful. Good collection dear. It is very useful for students, electronics project professionals and industries too.
@a2902793
@a2902793 6 років тому
Very useful intro, great work!!!
@interlinkknight
@interlinkknight 6 років тому
Thanks
@stevetobias4890
@stevetobias4890 4 роки тому
Thank you, I am buying displays at the moment so great timing
@interlinkknight
@interlinkknight 4 роки тому
Great! If you can, share videos or photos of your projects
@arduinorobotics9512
@arduinorobotics9512 3 роки тому
@@interlinkknight I want to show my projects to u ,can I?
@gladiusso
@gladiusso Рік тому
Really great and informative video! Thank you!
@cri8tor
@cri8tor 5 років тому
Wow! Thank you so much for this video. Just started to pick up more on the electronics hobby because I've been tearing down my mini mill, mini lathe and building tools out of salvaged treadmill motors. Have a feeling your videos will be very helpful in the following years of exploration. I made sure to subscribe and give a thumbs up. Cheers m8
@interlinkknight
@interlinkknight 5 років тому
Thanks for your kind words. That's the thing that keeps me going... Good luck.
@cri8tor
@cri8tor 5 років тому
Just started posting videos, so I know it's not the easiest thing to do.
@cri8tor
@cri8tor 5 років тому
@@interlinkknight Please consider recording a video tutorial on building a simple, 4-didget tachometer that uses a hall effect sensor. I'd like to add one to my drill press, mini lathe and mini mill. I don't trust the build quality of tachometers found on the Internet. Cheers
@interlinkknight
@interlinkknight 5 років тому
It's funny that you mention that because I've been working (for the past 6 months) on a tutorial video about tachometers with arduino. I'll focus on the type of sensors and the code. I'll include the example sketch, obviously. I am busy so it's not going to be ready soon, but little by little I am getting there.
@cri8tor
@cri8tor 5 років тому
Nice! I totally understand the time issue. I've been so busy with other projects and waiting for parts, I haven't been able to complete my mini series on my mini mill modifications. Look forward to your tutorials in the future. Cheers m8
@kwisatzhaderach1458
@kwisatzhaderach1458 5 років тому
I do barebones AVR. Thank you for this video!
@thedadgeek4793
@thedadgeek4793 3 роки тому
Your video is priceless thanks so much. Much abundance and love to you. 💪🏾
@interlinkknight
@interlinkknight 3 роки тому
You are so sweet. Thank you
@Drxxx
@Drxxx 5 років тому
perfekt video dude!
@fredbloggs4829
@fredbloggs4829 3 роки тому
Really cool summary. I subscribed.
@joaodps
@joaodps 6 років тому
thanks, this was great!
@martinkaspar5095
@martinkaspar5095 6 років тому
veryvery well done!! GREAT STUFF Dude
@interlinkknight
@interlinkknight 6 років тому
Thanks
@ybpvin
@ybpvin 4 роки тому
Це круто! Такого відео я ще не бачив. Лайк )))
@archyzone
@archyzone 4 роки тому
best one top man i love it, you are the GOD
@yangallison505
@yangallison505 3 роки тому
Hello, this is Allison from Beijing DWIN Technology from China. We are the manufacturer of Android screen, touch panel, Smart LCD display. And we specialize in this field for 17 years. We hope to get in touch with you. If you are interested, you can contact me through email:yangxi1@dwin.com.cn.
@rjpeterson1
@rjpeterson1 5 років тому
Excellent video !
@TheFlybyman
@TheFlybyman 5 років тому
Thank you ! :)
@skathiri2608
@skathiri2608 4 роки тому
Definitely helpful
@isprithul
@isprithul 5 років тому
I subscribed simply because you have so many arduinos. I know you love Arduino!
@interlinkknight
@interlinkknight 5 років тому
Yay! I own over 50 arduino nanos, so far.
@shivashankar28
@shivashankar28 5 років тому
@@interlinkknight do you use fpga
@interlinkknight
@interlinkknight 5 років тому
I never heard about fpga
@isprithul
@isprithul 5 років тому
@@interlinkknight Take a look at FPGAs. They are pretty cool, and advanced.
@MkmeOrg
@MkmeOrg 6 років тому
Great stuff!
@ghismo
@ghismo 6 років тому
Great review. Thank you ! Have you ever tried some e-ink displays ?
@interlinkknight
@interlinkknight 6 років тому
I've never tried e-ink displays because they have a very low refresh rate and they can't refresh thing normally as other displays. They require some sort of cycle that takes around 1 or 2 seconds. Is like that to avoid burning the screen. Is not a display that I would consider for common projects. If I ever see the need of displaying something without power, I will try it.
@ewncilo
@ewncilo 2 роки тому
This is awesome.
@yuanbin2705
@yuanbin2705 5 років тому
Very great intro,need any kind of TFT or OLED display module,pls let know.
@lachywocky
@lachywocky Рік тому
Thank you for the video I am wondering if you have found a display like the nextion that is brighter, this is a very low brightness screen. And not much good for outdoor use.
@interlinkknight
@interlinkknight Рік тому
I haven't found any brighter
@shsftech3792
@shsftech3792 3 роки тому
Thank you very much!
@alfiolocatelli5093
@alfiolocatelli5093 3 роки тому
Hello, great video, how does the nextion behave under the sun's light?
@interlinkknight
@interlinkknight 3 роки тому
As any common color LCD, in sunlight is not that great
@pje_
@pje_ Рік тому
Accurately I purchased the same OLED display 3 days ago before I watched this video and tommorow it will be at my home :)
@interlinkknight
@interlinkknight Рік тому
Nice! Let us know how it goes
@pje_
@pje_ Рік тому
@@interlinkknight It will be today or tommorow :]
@JessicaRyan7of9
@JessicaRyan7of9 5 років тому
Awesomeness. I like all of them. But the screen that got my eye was the one with the speedometer on it. Thank you for doing the projects. Is the code going to be available as well.
@interlinkknight
@interlinkknight 5 років тому
Yeah, the files for the tachometer are available, but in the nextion tutorial #4
@brunolima5214
@brunolima5214 5 років тому
Very cool!
@engineered.mechanized
@engineered.mechanized 4 роки тому
An excellent video to compare between all the readily available displays out there. How much did it cost back then to buy all the displays and the nanos to run them.
@interlinkknight
@interlinkknight 4 роки тому
I haven't seen any difference in price so far. They cost the same as before. I don't know how much i spent in total because I bought them in a long period of time.
@engineered.mechanized
@engineered.mechanized 4 роки тому
@@interlinkknight Got it. Thanks.
@rotorway133
@rotorway133 4 роки тому
Wow !! Display wizard :) Do you know anything about the H35B-IC ? Can't find any info how to use it !! :(
@interlinkknight
@interlinkknight 4 роки тому
I don't know that display
@digitalartee
@digitalartee 3 роки тому
The best. Thanks.
@interlinkknight
@interlinkknight 3 роки тому
:)
@sprokkel30
@sprokkel30 3 роки тому
Hi, thank you for this video. Can you tell me if it would be possible to run 5 screens of 1 nano? And if so which colour screens do I need to purchase?
@interlinkknight
@interlinkknight 3 роки тому
I doubt it, but even if you could then the refresh rate would be super slow
@sprokkel30
@sprokkel30 3 роки тому
InterlinkKnight is there a way to achieve this?
@interlinkknight
@interlinkknight 3 роки тому
Maybe with something more powerful like raspberry pi
@urbanturbine
@urbanturbine 5 років тому
That Nextion 3.5" is awesome... but i wonder if they make a nice enclosure for it too?
@interlinkknight
@interlinkknight 5 років тому
I've only seen them selling the case for the 7" display
@adriansnow5087
@adriansnow5087 5 років тому
@@interlinkknight Would you provide a link to that? I'm looking at a project that requires and enclosure/case. Thanks.
@cicizhao2118
@cicizhao2118 2 роки тому
HI friend
@urbanturbine
@urbanturbine 2 роки тому
@@cicizhao2118 hi. you make enclosures?
@siewski7964
@siewski7964 3 роки тому
very helpfull (:
@Hephaestus512
@Hephaestus512 4 роки тому
This video helped me decide on a screen for my project. Thanks for making it! I wrote Lode Runner on an Arduino, if anyone is interested in checking it out.
@laylaho9385
@laylaho9385 3 роки тому
This is Hayley from Beijing DWIN Technology. Our company is the leading company specializes in manufacturing Smart LCD module and touch panel at China for 20 years and has built our own 250,000 ㎡ production park. If any models you need, please feel free to contact us. We will send you the quotation. Email address: hayley@dwin.com.cn.
@yangallison505
@yangallison505 3 роки тому
Hello, this is Allison from Beijing DWIN Technology from China. We are the manufacturer of Android screen, touch panel, Smart LCD display. And we specialize in this field for 17 years. We hope to get in touch with you. If you are interested, you can contact me through email:yangxi1@dwin.com.cn.
@averaldo_
@averaldo_ 6 років тому
Man, I into your vids since the jet engine you done.. I have a nextion and i was working on a engine monitoring system, and you have it! Man, please share that project with us.. i'm strugling to design the graphic part of it since im not good with designing.. thanks for this video too.. i always wanted to see a direct comparison between various displays, very nice!
@interlinkknight
@interlinkknight 6 років тому
Comments like yours keep me going. Thanks for that. What project are you referring to, the tachometer? I already posted the files for that. Or are you talking about another project?
@averaldo_
@averaldo_ 6 років тому
The Project that is runing on the middle nextion display right at the begining of this video. The uper one shows a tachometer, the lower shows some tests, and the middle one shows 4 gauges and some text parameters about fuel flow and temperatures.. like a jet engine display.
@interlinkknight
@interlinkknight 6 років тому
Oh, that. Well, the project is not complete so I didn't officially publish it. But if you want what I have so far, here it is: drive.google.com/open?id=1z0PbqoAE5eu9GRIRRBzzJ-Ek9NYrBhJW drive.google.com/open?id=1Slbw1Pl0Sj07stFvJy2LQZo_77LpoHq8
@averaldo_
@averaldo_ 6 років тому
InterlinkKnight Thank you ! Maybe I work on it and give some feedback to you. i'm definetely waiting more interesting videos.. i think you love displays as much as i do. Unfortunatedly they are a quite expensive here in Brazil. Thank you again!
@interlinkknight
@interlinkknight 6 років тому
I hope is helpful. Good luck
@OttoDIY
@OttoDIY 3 роки тому
great video what is the black thing on top of the 8x8 led matrix?
@interlinkknight
@interlinkknight 3 роки тому
That's a 16x2 LCD display, but it's turned off
@OttoDIY
@OttoDIY 3 роки тому
@@interlinkknight no i mean the LED matrix max7219 on the top right corner displaying the alphabet
@interlinkknight
@interlinkknight 3 роки тому
Above the matrix display there are 3 displays: the OLED i mentioned on the video, next is the 16x2 LCD and then the nokia LCD
@gsrathore97x
@gsrathore97x Рік тому
You are Great 🔥💯💯💯
@user-hp1xs6jp4z
@user-hp1xs6jp4z 5 років тому
More about OLED 12864 2,42. Please 😇.
@tuliszkam2393
@tuliszkam2393 3 роки тому
Great review! What is the name of the program for GUI design from minute 4:10 ?
@interlinkknight
@interlinkknight 3 роки тому
That display and software is called Nextion. The link it's in the description
@user-qh7dn9iz7p
@user-qh7dn9iz7p 5 років тому
OLED screen is good, but you should be careful if you want to show something for a very long time, as the brightness will decline after long time lighten up, and the brightness of each pixel will become uneven.
@interlinkknight
@interlinkknight 5 років тому
True
@testingbeta7169
@testingbeta7169 5 років тому
yeah, that noise from oled ssd1306 are HUGE problem if you are planning to make anything audio, and controlling the volume ics with same I2C lines :P learned that the hard way (5.1 digital amplifier) reason, they emit HF sound is because they boost voltage i think ,this circuit is builtin
@interlinkknight
@interlinkknight 5 років тому
Interesting...
@francoisgrandcollot1027
@francoisgrandcollot1027 Рік тому
Excellent I'm looking for an example with ST7567S I2C ? Do you have it ? thx Paco
@interlinkknight
@interlinkknight Рік тому
Sadly I don't have it, but I bet there is a library for that
@Naqshsalim
@Naqshsalim 5 років тому
What kinda of display should we buy for outdoor usage. I intend to make Bluetooth enable smart connect for mobile
@interlinkknight
@interlinkknight 5 років тому
For outside I would use the nokia 5110 or LCD 128x64 SPI with ST7920 driver, because they can be seen at sunlight.
@sagarmakhija1994
@sagarmakhija1994 6 років тому
Can you make a video to showcase nextion display under sunlight?
@interlinkknight
@interlinkknight 6 років тому
I am not sure a video about only that would worth it, especially because cameras don't capture what the human eye see. The nexiton display is like any other TFT color display under direct sunlight. Things are hard to see. Surely not recommended for outdoors, unless you have some shade over the display.
@FarSeeker8
@FarSeeker8 5 років тому
Can you do one exclusively covering those that can show video, like the last one you showed on this video?
@interlinkknight
@interlinkknight 5 років тому
I already made 6 video tutorials about the nextion display. Please take a look at the description
@FarSeeker8
@FarSeeker8 5 років тому
@@interlinkknight I just looked over your other videos on nextion displays. They seem to cover control screens and short video clips. I'm trying to find one that can show a continuous video like a DVD player, but using a smaller screen (< 3 inches). I'm trying to create a binocular remote robot viewer. It would need to display over 15fps. Can you help?
@interlinkknight
@interlinkknight 5 років тому
You need something more powerful than arduino. I can't help you with that.
@technologi-electronic
@technologi-electronic 4 роки тому
Very good sir
@MarceloRezende75
@MarceloRezende75 5 років тому
Is it possible to do a project with 2 k-type theemocouple, a water level sensor and a lcd display with a Arduino Nano?
@interlinkknight
@interlinkknight 5 років тому
There's nothing you can't build with arduinos, for this kind of project with sensors and displays.
@kadive25nyc
@kadive25nyc 5 років тому
Question? what would be the best monitor for a smart mirror without taking old pc monitor apart. Thanks!
@interlinkknight
@interlinkknight 5 років тому
I would use the TFT 2.4" ILI9341, but if you want a high refresh rate using cameras you should use something more powerful than arduino.
@iftihossain6649
@iftihossain6649 3 роки тому
Hi, How did you make the GUI? Is there a particular software you used?
@interlinkknight
@interlinkknight 3 роки тому
What display are you talking about?
@microbits8774
@microbits8774 3 роки тому
1:48 with the library oled i2c you can control the brightness
@interlinkknight
@interlinkknight 3 роки тому
Yes, but only 2 settings (High-Low)
@The504lego
@The504lego 2 роки тому
So I want to make a halo style ammo counter for my nerf halo assault rifle I've been looking at oled displays but I dont know the size I need
@marcelldavis6426
@marcelldavis6426 3 роки тому
Ive got into arduino programming 4 months ago and ive already bought a couple of displays, sensors, boards and Rf modules and its getting more and more. Maybe oneday, ill have as many displays as you have 😂😂😅
@interlinkknight
@interlinkknight 3 роки тому
Of course! We all start from scratch. You set the limits on how far you want to go
@tablatronix
@tablatronix 5 років тому
I am digging that solid black red led matrix, can you identify it ?
@interlinkknight
@interlinkknight 5 років тому
LED 8x8 Matrix with Max7219 driver. The example file is in the description. But keep in mind that I put a black gel over it so that's why looks better.
@donovannewton9507
@donovannewton9507 2 роки тому
Would like to know what the large lcd screen is and the setup in that
@interlinkknight
@interlinkknight 2 роки тому
It's a VGA monitor and I already have a link on the description with my example sketch
@davidmg1925
@davidmg1925 5 років тому
Will arduio work with raspberry? Will these screens work with raspberry. Have you done a similar test for raspberry....... I would be interested.
@interlinkknight
@interlinkknight 5 років тому
I never used raspberry so I don't know. Have you search for libraries?
@NetisAmarok
@NetisAmarok 5 років тому
What do you use for the PC monitor? Is this the VGAX library?
@interlinkknight
@interlinkknight 5 років тому
Yes
@fullmoon6661
@fullmoon6661 4 роки тому
@@interlinkknight what's the monitor name? Looks pretty nice on camera
@supercybercow5388
@supercybercow5388 5 років тому
Hello is possible to draw raw pixels with x,y coordinates and lines and other graphic primitives on the Nextion display ? Thank you.
@interlinkknight
@interlinkknight 5 років тому
Directly from arduino, no. But when I want something like that I create an image and load it on the display so obviously you can have dots, lines and any graphic that you want. But it most be added on the nextion editor.
@supercybercow5388
@supercybercow5388 5 років тому
As i understand correctly with the Nextions you predefine the graphic which you want to turn on or off with the custom editor so all the work is done off the ardu on the display controller itself, but let suppose i want to draw real time or near real-time some graphs, lines, or other geometric primitives from eg. x1, y1 to x2, y2, is that possible ? Thanks
@interlinkknight
@interlinkknight 5 років тому
That's not possible. You should use a conventional arduino-display for that.
@supercybercow5388
@supercybercow5388 5 років тому
Ok, your answers are really appreciated, thank you
@RatonMalo
@RatonMalo 4 роки тому
Hi! I have a question about 1.8inch screens, there is any way to play mp4 videos in that tiny screen? using Arduino, RBP or other method? Thanks
@interlinkknight
@interlinkknight 4 роки тому
With arduino, no way. Maybe with RBP but I don't know how.
@RatonMalo
@RatonMalo 4 роки тому
@@interlinkknight Thank you
@vitorlerbom3904
@vitorlerbom3904 Рік тому
olá como escolher e adaptar um display desses para colocar no local de um lcd display de um teclado korg x50 ....??
@marcodev3375
@marcodev3375 5 років тому
I want to make a smartwatch with little touch screen. Which one you recommend?
@interlinkknight
@interlinkknight 5 років тому
To be honest, I don't know. I never used that small display with touch screen.
@Blaklyon0
@Blaklyon0 3 роки тому
Is it possible to use your top display choice, as a screen for arduboy handheld mod?
@interlinkknight
@interlinkknight 3 роки тому
No
@electronik808
@electronik808 День тому
what is the display that you have on the bottom left? the blue one with hello world seems the most clear in the video
@interlinkknight
@interlinkknight День тому
It's also a TFT 1.8" ST7735 as I mentioned, but the module looks a little difference. There are 3 variations that I know of.
@Rickjames127
@Rickjames127 4 роки тому
So when you say high refresh rate what is it limited by? The libraries or like a normal display they have a rated refresh rate represented in hz?
@interlinkknight
@interlinkknight 4 роки тому
They are limited by the library and arduino processing power.
@linuxuser1234
@linuxuser1234 4 роки тому
How did you dual boot your program on your Dell desktop and what application did you use
@interlinkknight
@interlinkknight 4 роки тому
Dual boot? I don't know what you mean with that, but to use the Dell monitor I used a VGA library. Link is on the description.
@linuxuser1234
@linuxuser1234 4 роки тому
@@interlinkknight this file is unsupported
@interlinkknight
@interlinkknight 4 роки тому
Open in a computer
@mintybudgie
@mintybudgie Рік тому
are you able put the spi 0.96 display right on an arduino uno's gpio port??? i just bought one and i want to know. this is my first time with an arduino
@interlinkknight
@interlinkknight Рік тому
Yes, of course you can use Arduino UNO to connect to the SPI display
@mintybudgie
@mintybudgie Рік тому
@@interlinkknight turns out the display i bought is an i2c but can i plug it in in the pin slots on the board as if it is a shield
@davidhsieh2761
@davidhsieh2761 5 років тому
What about viewing angles? Are the LCDs very poor being TN panels?
@interlinkknight
@interlinkknight 5 років тому
Compare to a modern smartphone screen, the viewing angle is bad. In terms of functionality they are good enough, in my opinion.
@roycai8895
@roycai8895 5 років тому
I really want to try one of those e paper display, but they are too expensive..
@interlinkknight
@interlinkknight 5 років тому
Yeah, but I also don't like that they need a few seconds to refresh the screen because it needs to cycle both frames a few times to remove the old image. I find that very problematic.
@pablofuentes5117
@pablofuentes5117 4 роки тому
Excelente material, deberías tener un canal en español✌️
@interlinkknight
@interlinkknight 4 роки тому
Gracias. Lo considerare pero por ahora solo me concentro en un solo idioma y el mas universal es ingles.
@TheRainHarvester
@TheRainHarvester 5 років тому
Do you think the supply of 5110 lcds will ever run out? I'm thinking of doing a kickstarter project with this display.
@interlinkknight
@interlinkknight 5 років тому
What?
@TheRainHarvester
@TheRainHarvester 5 років тому
InterlinkKnight I edited a spelling mistake, above.
@interlinkknight
@interlinkknight 5 років тому
From what I know they are still producing those displays. And if they are using old displays and if they run out, they will produce more. I am not worry about that.
@sanguchito7381
@sanguchito7381 5 років тому
I wouldn't bother with them. Their reliability sucks. There are these models from a company called JLX that in my experience are faaar better.
@TheRainHarvester
@TheRainHarvester 5 років тому
San Guchito , what goes wrong with them? (I've not had any go bad.) I run them at 3.3v , but some risk powering them at 5v.
@zhyarfateh201
@zhyarfateh201 4 роки тому
thank youuuuu
@IvanIvan1974
@IvanIvan1974 5 років тому
0:47 Like you said properly, the flickering is caused by delete the previous text/digits and then rewrite it at the same position. This is simple to implement ad actually the first solution someone came up to. Write-delete-write-delete...etc. The flickering is caused due the pixels(LED, OLED, TFT or whatever) switching off and on again after a while. If this "while" takes too long, human eyes can detect an annoying flickering, like switch on and off a ordinary LED. But if you switch on-off-on fast enough our eyes don´t see a flickering anymore. Unfortunately this is not always possible if you work with slow buses like I2C etc. One way to solve this issue is to overwrite the previous text/digits and delete only what is leftover, and to go a step further, skip the digits which already are displayed and overwrite only those which differs from the previous ones. If you for eg. write "432" and the next value is "431" skip "43" and overwrite "2" with "1" and delete the leftover. The leftover is caused by the different widths of the digits, in this case "1" is smaller than "2" so you end up with an overflow on the right side. I developed such a function which handles that process and it works well, no flickering and fast refresh rate, even on a I2C bus. It took me some effort because I had to fight through datasheets of display driver micro controller etc. to setup the function properly. Was it worth put that effort in it? For sure!
@interlinkknight
@interlinkknight 5 років тому
That's really cool. Yes, I know it's possible but it needs to be implemented in a library so people can use it easily. Did you built a library?
@IvanIvan1974
@IvanIvan1974 5 років тому
To built a library and include also other useful stuff, might be a step for a general usage with a higher programming language, usually C. For now I use it in my assembly code, I use to write code in assembly for a deeper control on hardware and final code. I just gave an idea how to approach such an issue, perhaps there are other, better solutions depending on the environment used.
@interlinkknight
@interlinkknight 5 років тому
Oh. Ok.
@TheRainHarvester
@TheRainHarvester 5 років тому
Heh heh, this reminds me...I did this technique for the display in my avatar icon. No flicker if you turn off/on only those leds that need turning off/on.
@IvanIvan1974
@IvanIvan1974 5 років тому
@@TheRainHarvester Actually the meaning of my previous comment was to encourage to put the effort to solve issues by yourself. You don't have to be reliant to libraries of major companies. Everyone can do it. Thanks for your confirmation.
@Cleacat
@Cleacat 2 роки тому
I like the nextion display 3.5 enhanced
@interlinkknight
@interlinkknight 2 роки тому
If you can find a compatible library, yes
@thomasalexander1851
@thomasalexander1851 4 роки тому
How did you connect the big screen on the Arduino? Shield?
@interlinkknight
@interlinkknight 4 роки тому
The vga? There's instructions online on how to do it. You need a few resistors
@kamalkant4256
@kamalkant4256 5 років тому
is it possible to display on vga display through ardiono mega?
@interlinkknight
@interlinkknight 5 років тому
Of course. Search for tutorials about that
@YoDay
@YoDay 5 років тому
Wow man
@bzqp2
@bzqp2 5 років тому
yeaaa
@hafo821
@hafo821 5 років тому
Hi, please, where to buy a trimmer with a knob, like is on your frequency generator?
@interlinkknight
@interlinkknight 5 років тому
Ebay
@hafo821
@hafo821 5 років тому
omg .. .you don´t say ... I ´ve already checked ali and ebay, but I couldn't find anything as a "trimmer with knob" ..
@interlinkknight
@interlinkknight 5 років тому
Well, you should learn more about searching on ebay. For example you can use key words like + or - to select what word you want to appear and what word to exclude. A search of "knob -rotary" will exclude articles that has that word "rotary". Anyway, this is one article: www.ebay.com/itm/10K-Ohm-Multi-turn-Trimmable-potentiometer-3296-w-handle-Pack-of-2/381427296466 I can't guaranty they link will keep working after a while because they all change constantly so... buy it now.
@hafo821
@hafo821 5 років тому
Thank you!
@Faruox
@Faruox 6 років тому
Great
@RDCST
@RDCST 3 роки тому
There's anyone that have a good vision angle? Most of those LCD change the color depending on the view angle, specially dark tones.
@interlinkknight
@interlinkknight 3 роки тому
The OLED has perfect viewing angle. All color displays here have kinda bad viewing angle
@SunilSharma-ic9bm
@SunilSharma-ic9bm 3 роки тому
Thanks
@goodwill7643
@goodwill7643 5 років тому
what about e-pater 7 e-ink? Thanks for video.
@interlinkknight
@interlinkknight 5 років тому
All ePaper displays available for arduino that I've seen so far are terrible. They have a slow refresh rate so they are disqualified, in my view. To update the screen you need to do a strange cycle that can take a few seconds and looks awful. You can hack them to have a faster refresh rate but they burn-in pixels. Although it's strange because I've seen Kindle E-Readers that have an excellent ePaper display with very fast refresh rate, so the technology is there. When they get available for arduino, I'll start using them and doing tutorials and recommending them. Until then, forget it. THEY CURRENTLY SUCK!!!
@goodwill7643
@goodwill7643 5 років тому
@@interlinkknight well if you update only specific pixels (not whole screen) it goes relatively good. I think it culd be good option to battery devices which updates info not frequently and only for few pixels. Like solar voltmeter, termometer, clock, traffic schedule, etc... And on the end those are displays anyway. So your video is a great display summary and I would say it missing ePapter/eInck and TN positive LCD. ukposts.info/have/v-deo/nZ6riZigio2Wz4U.html ukposts.info/have/v-deo/kIVhoaqFbGiixqc.html
@interlinkknight
@interlinkknight 5 років тому
Those epaper displays you show me are leaving ghost pixels, and if you keep doing that it's going to burn them like that. I am still waiting for good epaper displays to be available. Maybe I'll do a part 2 of the video someday and if a good epaper display is available I'll include it. Trust me, I know epaper displays are cool. But we need the good ones, like the new kindle e-reader have.
@faisaltaher851
@faisaltaher851 3 роки тому
I am sorry but r we not gonna address how u controlled a computer screen that's amazing, how did u do that
@interlinkknight
@interlinkknight 3 роки тому
There's a VGA library for arduino that makes possible that. If you google it, you'll find it. Actually I put on the description my example sketch that I used on this video for all the displays, including VGA monitor. The only thing is that you need to add a few resistors to connect to the VGA port, but it's easy to do.
@_xwtk
@_xwtk 4 роки тому
The Nextion is the winner in my opinion (I have the Intelligent Series 7.0')
@cicizhao2118
@cicizhao2118 2 роки тому
Hi this is Cici from DWIN, would you like to have a try of our displays?
@Tony770jr
@Tony770jr 3 роки тому
What's the best sunlight readable in 5 inch TFT?
@cicizhao2118
@cicizhao2118 2 роки тому
hi we have high brightness sunlight readable TFT LCD, are you still be interested in?
@liamlinh
@liamlinh 4 роки тому
in 4:33. Are you playing video on those screen?
@interlinkknight
@interlinkknight 4 роки тому
It's a series of images. If you take a look it's in a loop
@Mikhail-Milkhail
@Mikhail-Milkhail 3 роки тому
how did you connect the vga display?
@interlinkknight
@interlinkknight 3 роки тому
If you search on google or youtube "vga arduino" you'll see how. You need a few resistors and a library. The example sketch is in the description of this video
@jaiwadhwa1397
@jaiwadhwa1397 4 роки тому
Can anyone please tell me about IPS/TFT 7' displays available in India, need to make a small project.
@trandung824
@trandung824 3 роки тому
4:28 is that a video? or it just a gif?? can we play a shot video using arduino? Thank you.
@interlinkknight
@interlinkknight 3 роки тому
It's a bunch of images. That's it
@admiral7605
@admiral7605 2 роки тому
Which display is best used both outdoors and in low light?
@interlinkknight
@interlinkknight 2 роки тому
The Nokia 5110 because it's an lcd with backlight so it works in sunlight and in the dark
@admiral7605
@admiral7605 2 роки тому
@@interlinkknight thatnks for the answer. Yes, backlight displays are obviously the best solution for that. But if only look at color displays, which one is brighter? Can the text be seen under the sunlight? You showed the OLED display at 1:52. Yes, it is not as bright as we would like, but the text can be seen. Compared to the rest of the color displays in the video, are they better or just as faded?
@interlinkknight
@interlinkknight 2 роки тому
All color displays are bad in sunlight. I don't notice any difference between them. You are right that the OLED is not too bad in sunlight, so maybe consider buying a color OLED. I don't own one myself, but I do know they are available.
@ryanowens100
@ryanowens100 3 роки тому
I always have trouble with the libraries, I know he said this ises UCG library. But in general displays really test me. 9/10 there is always error when compiling. Anyone else feel the same?
Display examples - which one to use?
12:41
Electronoobs
Переглядів 245 тис.
OLED Displays with Arduino - I2C & SPI OLEDs
41:41
DroneBot Workshop
Переглядів 1 млн
Парковка Пошла Не По Плану 😨
00:12
Глеб Рандалайнен
Переглядів 12 млн
[실시간] 전철에서 찍힌 기생생물 감염 장면 | 기생수: 더 그레이
00:15
Netflix Korea 넷플릭스 코리아
Переглядів 37 млн
My First ATTINY85 Project!
23:48
upir
Переглядів 61 тис.
Top 5 Arduino Displays
6:29
educ8s.tv
Переглядів 615 тис.
Cheap and Easy to Use ESP32 Screen!
8:21
Brian Lough
Переглядів 97 тис.
Top 20 Arduino Projects | Arduino project compilation
24:55
Mr Innovative
Переглядів 881 тис.
What is worth salvaging from an old smartphone?
8:35
GreatScott!
Переглядів 1,1 млн
4.3" Arduino Shields - Overview & Tutorial
5:08
NewhavenDisplay Videos
Переглядів 261 тис.
The Raspberry Pi Pico WAS Overrated! But that changed!
10:18
GreatScott!
Переглядів 579 тис.
iPhone 19?
0:16
ARGEN
Переглядів 3,9 млн
План хакера 🤯 #shorts #фильмы
0:59
BruuHub
Переглядів 958 тис.
Как открыть дверь в Jaecoo J8? Удобно?🤔😊
0:27
Суворкин Сергей
Переглядів 789 тис.
Нужен ли робот пылесос?
0:54
Катя и Лайфхаки
Переглядів 792 тис.