Переглядів 1,454
Build a 3D printed Menorah that lights up with NeoPixel LEDs and CircuitPython. A push button allows you to light up a NeoPixel LED on each night of Hanukkah.
Learn Guide: learn.adafruit.com/neopixel-m...
This minimalistic design features parts that snap fit together and print without any supports. The assembly is modular and easy to put together.
The bulbs are 3d printed in translucent PLA and the NeoPixels are fitted inside the candle holders.
Code on GitHub
github.com/adafruit/Adafruit_...
Parts
QT Py RP2040
www.adafruit.com/product/4900
NeoPixel Button PCB
www.adafruit.com/product/4356
16mm Push Button
www.adafruit.com/product/1503
3-pin Cables
www.adafruit.com/product/4721
2-pin Cables
www.adafruit.com/product/4720
M2.5 Hardware Kit
www.adafruit.com/product/3299
USB-C Cable
www.adafruit.com/product/4696
Visit the Adafruit shop online - www.adafruit.com
-----------------------------------------
LIVE CHAT IS HERE! adafru.it/discord
Adafruit on Instagram: / adafruit
Subscribe to Adafruit on UKposts: adafru.it/subscribe
New tutorials on the Adafruit Learning System: learn.adafruit.com/
-----------------------------------------