nRF52840 Dongle getting started

День тому

#nRF52840 Dongle getting started
www.nordicsemi.com/eng/Produc...
Ubuntu udev rules
sudo cp 71-nrf.rules /etc/udev/rules.d/
sudo cp 99-mm-nrf-blacklist.rules /etc/udev/rules.d/
sudo udevadm control --reload-rules
sudo udevadm trigger
Start nrfconnect
./nrfconnect-2.4.0-x86_64.AppImage
Development Environment
ubuntu 18.04 64 Bit (www.ubuntu.com/) (unity)
Eclipse Oxygen (www.eclipse.org/)
Arduino 1.8.4 (www.arduino.cc/)
KiCad Nightly-build (kicad-pcb.org/)
With CC or Public domain Pictures from pixabay
pixabay.com/en/ubuntu-logo-ub...

КОМЕНТАРІ: 25

@hendrikjander358 5 років тому

Hi, thank you for that great introduction. Is it possible to use arm mbed with that dongle ?

@Rocksetta 5 років тому

Have you done any work with the nrf52840 USB Dongle and the OpenThread Border Router running on a Linux machine? It can be used to setup a Thread Mesh network.

@sladkii_bubalekh 5 років тому

Hi! Are you going to release more videos about nrf52840 in the future, as you did with the ESP32?

@pcbreflux 5 років тому

Максим Сафронов Yes, if I have the time. Any suggestions or topics welcome. But for questions also use the nordic developer forum.

@sladkii_bubalekh 5 років тому

I don't have any specific questions, but just want to see your experience with nfr52. Maybe it will be installation of FreeRTOS port, creation of custom BLE service, developing a small project based on nrf52, etc. I'm watching your videos in order to learn the tricks that you show. So it would be interesting to see your approach in BLE

@MrJanulis 5 років тому

I would love to see more of nrf52840 as well! As an idea for topic - remote control for music player on a mobile phone - then we can use nrf52840 in a car (maybe mount somehow on a steering wheel) to change tracks / adjust volume...

@techtinker3949 4 роки тому

Would also like to see esp32 with the nfr52 examples and lora combined

@RaadYacu 5 років тому

topic dearest to me - excellent So can segger be used to program the dongle? I need to get couple of these

@pcbreflux 5 років тому

Think you have three options ... use P1 (Pin Header 2x5, 1.27mm, Not mounted) or J1 (TC2050-IDC) or the two SWDIO and SWDCLK solder-points.

@pdpro 5 років тому

Thanks for a great quickstart. I wanted to develop a product with nRF52832 and bought this nRF52840 dongle as it is cheaper. My approach is to develop basic hardware configuration attaching sensor and firmware testested on this dongle which I can finally use on nRF52832 based production device. Is it right and workable approach?

@jp46614 Рік тому

bro never got a reply

@sureshmdevhyderabad8906 5 років тому

To get started with my Bluetooth app, buying this dongle enough? Do I have to buy some other hardware devices. Can I connect sensor or led to this dongle and execute program on it...

@pcbreflux 5 років тому

Luckily you can config any/most GPIO pins with an interface like uart, I2C, SPI, ADC etc. If you project are ok with the 15 GPIO pins you can use the solder pins around the dongle. For developing it's maybe better with a programmer/flasher/debugger but you can use also the nRF connect for desktop but this is today a beta version (don't forget to flash the bootloader otherwise you can use nRF connect only once! ;)

@hinterhaeltiger 2 роки тому

Ahh another very good german accend tutorial

@briantw 2 роки тому

Great video. Just a note: Removing silence in your audio is not as transparent as you think. It sounds very cut up and unnatural.

@kasparska7809 2 роки тому

to save some time for peole who is looking how to start, it would be gret if you mentioned that instruction is for Linux

@user-mu8wi1ch7w Рік тому

연락처 알수있을까요

@3dvisiongamer213 5 років тому

Can I use this as a normal USB Bluetooth dongle in Win 10? Would the drivers for this functionality automatically intstall or just download their driver? (Would it work eithout the whole development suite and special setup). I just want bt 5 and I have other devices this could come in handy for

@pcbreflux 5 років тому

Not try win10 but think this is the main platform nordic will target the dongle, so it should work easy.

@grndkntrl 5 років тому

No. You would need to program it first to behave as you describe. This is a development tool, NOT an out-of-the-box preprogrammed device for end-users!

@ajaybnl 5 років тому

Very good. Can you give overview of your lab? Nice Pcb Made. Thanks.

@pcbreflux 5 років тому

Not joking but my "lab" have aprox. two cubic meters. Have a triocular microscope with 1080p camera, 3 solder stations, function gen, several multimeters, only one oscilloscope plus a DMM with oscilloscope display, tons of boxes with electronic parts. My bench is included inside a rack for all the boxes.

@zilluss 5 років тому

Hey I just wanted to say thanks for your videos on Nordic chips. I was able to build something useful based on your repo in no time (github.com/zilluss/Open-Nuki-Fob)

@pcbreflux 5 років тому

Thanks, also for sharing your code. It seems you can use this code to communicate with a smart lock. Should be easy to run the code also on the nRF52.