#restoration #lighter #ww2
Hey if you want to support me, you can become my patreon or invite me for a virtual beer via Paypal:
Paypal: paypal.me/NTRBeer
Patreon: / notterriblerestorations
Hello all,
in this video I am restoring a gasoline lighter from the time of the second world war. The german lighter was made until the 40's and shows very clear signs of age. The functionality of the rusty lighter is almost identical to the legendary zippo lighter. My biggest goal is to keep the vinatge lighter as original as possible and replace as few parts as possible.
First i completely disassembled the vintage everyday tool to get a picture of the corrosion. After I had all the parts in front of me I cleaned them in deruster from rust and old coatings. Then all the parts of the rusted WW2 lighter were sanded and then polished with scotch brite.
I then chrome plated the lighter from the second world war. When chrome plating, the layer build-up is crucial and all layers must be polished most carefully, as the preparatory work is crucial when chrome plating.
The layer structure is as follows:
1. An alkaline copper layer as a base and spear for the second layer.
2. After the barrier layer has been applied, copper plating can be carried out with acid electrolyte. Without the underlayer, the acid would quickly eat through thin metal layers. Copper plating must be done because it evens out uneven surfaces very well and provides the best rust protection for the steel.
3. Nickel is now applied as a barrier layer. The nickel prevents the chrome from reacting with the copper.
4. Finally, I apply the final chrome layer with pen electroplating. It provides a dark noble shine. In germany, only chrome III may be used for this purpose by private users. Specialists may also use chrome IV, which provides a brighter shine. Chromium VI is completely banned due to its toxic vapors.
Finally, I still replace the wick and then I reassemble everything again
I hope you have fun with the video. And remember, leave a comment and with a little luck you will win the pocket knife.
In the beer test this time a "Grolsch" from the Netherlands must prove what it has to offer.
Patreon: / notterriblerestorations
Here are the links to the tools and equipment I use:
IMPLOTEX 3000 Compressor:
amzn.to/40Xp5iK
Powder Coating Gun:
amzn.to/3XEnXhk
Laser Engraver
amzn.to/3EhzLza
Fein Multimaster MM 700
amzn.to/3Ia7xrg
Bosch Professional Impact Drill GSB 18V-110 C
amzn.to/3I7Ttyh
Sandblasting Cabinet
420 Liter
amzn.to/3S62o89
350 Liter
amzn.to/3IyPj3V
220 Liter
amzn.to/3IzYMYE
Kamera - Sony AX53
amzn.to/3Kif4XB
*Grabby "McGrabface" Grabson*
➡️amzn.to/3Z506sc
Stay healthy
Dr Beer
00:00 - Intro
00:43 - Disassembly
03:56 - Rust removal with rust remover
04:24 - Metalwork tank
05:28 - Metalwork main body
06:53 - Metalwork side flap
07:30 - Metalwork flint holder
08:23 - The tumbler parts
08:58 - Adding a knurling
09:20 - Turning a new rivet
10:04 - Chrome plating
12:35 - Replacing seal and wick
12:56 - Beer tasting
13:54 - Assembly
15:40 - Result
17:12 - Testing
Music:
Intro:
Elegant Logo by Free Music | / fm_freemusic Music promoted by www.free-stock-music.com Creative Commons Attribution 3.0 Unported License creativecommons.org/licenses/...
Result Scene:
Timeless - Lauren Duski from UKposts audio library