Here’s Why The One Bucket Method Is The Safest & Most Effective Way To Wash Your Car

День тому

【Tire Inflator】Get 28% OFF on Fanttik X9 Ultra tire inflator for pickup trucks:
www.amazon.com/dp/B0CQK4SRD8?...
(Apply the Coupon + Use Code X9ULTRA3IN1)
Coleton shows you a nifty new method of washing your car that can save you tons of time.
Wash Mitt: amzn.to/3J0AeXN
Clear Buckets: amzn.to/3ZxptUe
Black Buckets: amzn.to/3YwJOYl
Gamma Seal Lids: amzn.to/3mwTmFq
Bucket Dolly: amzn.to/3IQFoFK
MTM Spray Gun: amzn.to/3JkVx7T
MTM Nozzles: amzn.to/3ZvApBJ
MTM Foam Cannon: amzn.to/3myl194
Chemical Guys Honey Dew Snow Foam: amzn.to/3kNdtPm
Adams Car Shampoo: amzn.to/3ygBIsh
Adams Graphene Shampoo: amzn.to/3ZLhjXS
For more information on having your car detailed check out www.cleardetailing.com or email me at coleton@outofspecstudios.com
Find all of our Amazon must-haves here:
www.amazon.com/shop/outofspec...
0:00 Welcome
2:24 Two Bucket Review
11:21 Rinsing
13:53 One Bucket Method
20:41 Final Thoughts
#detailing #carwash #tesla

КОМЕНТАРІ: 143

@Datimdavis2900 Місяць тому

My dad showed me (effectively) this approach 46 years ago. Yes, the product then were not nearly as good as today, but it is the method I use & have taught my sons.

@Jorgesdetailgarage Місяць тому

I used to use microfiber towels at first and then about a year ago. I switched to the mitts pretty much the exact ones that you have. I have about eight of them and it works great. Love the videos keep up the good work

@thesinwi Місяць тому

First time I have seen anyone wash with this method. Personally this is what I have done for years, yes you use more towels or mitts but your assured not to be using a contaminated media to wash with. Glad to see you did this video. Informative and useful. Best wishes with your projects and business.

@TeslaFSDStudent Місяць тому

I cannot agreed more! Thanks for sharing the information.

@jimmyowens954 Місяць тому

Great video! Very informative from a detailing pro. Thank you

@jcruhrskov194 Місяць тому

I used your idea by the 1 bucket method. It works like a charm! Bug thumbs up for that (really obvious, yet I didn't think of it) great idea!

@wrigleyfield9042 Місяць тому

You made a believer (and subscriber) out of me. Thanks for the video

@terencestephenson4727 Місяць тому

I've used that same Chemical Guys wash mitt for years and prefer it over other stuff I've tried.

@stephenlouden480 Місяць тому

you should foam the car dry then rinse off. just blasting it with water first pushes the dirt around potentially scratching. foaming 1st will louden the dort and drag it down and cpr9vide a much more effective rinse which then makes the one bucket method even better. I sometimes do a no bucket method with a coyote mitts and pressure wash off the mitt wring out and resoak for c the next panel. hey as long as you're being safe and using precautions do whatever way you like

@Weeem Місяць тому

He did say that (@ 13:55)

@Turtle_toys Місяць тому

What did he say, the cpr9vide

@mino4946 26 днів тому

@@Turtle_toys provides

@robans 23 дні тому

Yeas because if you foam it first, the dirt levitates on your paint and does not scratch your car. What a bunch of bull*** Or maybe the dirt gets tiny wings from all the foam and fly away from the car.

@teslafybc3450 Місяць тому

I love your Vossen wheels and stance of your M3P. Do you mind sharing the specs of wheels/tires/suspension setup? Keep up the awesome content!

@joebullwinkle5099 Місяць тому

Wow, great Info, you sold me! I'm converting, just the time saving is well worth it!

@jacknash3365 25 днів тому

It’s time saving during the wash, but then you have loads of mitts to clean/dry. I think this could be good outside in summer though, where speed is key.

@brokeboy87 Місяць тому

If Pan, the organizer, gets on board with this method, it could revolutionize the detailing world.

@emp0rizzle Місяць тому

🤣🤣The detailing world is full of sheeps

@439530 Місяць тому

I been doing this common sense method of multi mitt for years. There’s absolutely no reason to keep reusing the same dirty mitt, plus it takes longer.

@mario82santos Місяць тому

5 months a go he already launched his video explaining the one bucket method 😂😃

@whitegoodman7465 Місяць тому

Pan does whats profitable to him, not what makes sense and plus he does the one bucket and squeezes the mitt out after each use 💀💀 not even using multiple mitts at the least. Why change something thats working IE: 2 bucket method.

@whitegoodman7465 Місяць тому

If your worried about a dirty rinse bucket or a dirty mitt you completely missed the importance of a pre wash stage which effectively gets 90 percent of the dirt off the vehicle prior to contact wash. Id be more worried about rubbing dirt around the car before you dunk that mitt instead recontamination from the rinse bucket.@@439530

@knsaber Місяць тому

Can’t wait to try this method!

@Charles_CLE_Coupe 3 дні тому

Great video man! I use exactly the same method in France since 6 months! It works great for me and saves a lot of time. Funfact, i only use 7 microfibers from the Ragcompany the soft 500’s. 1 towel for 4 sites not 8. It works perfect for me. Big respect for you and your work! Top! 👍😉

@KevinLaffey Місяць тому

Great video. I think I've been scrimping on foam for years.

@GHN1013 3 дні тому

This is the exact method I’ve been using for years. First introduce by Garry Dean. It’s not only safer but actually *faster* than having to rinse mitts. And yes, using the chenille wash mitts is MUCH easier and easier to remember to use than MF towels. I actually avg about 8 Wash Mitts (front and back) for an entire car. Only other thing I would add is 1) foam prewash, 2) Rinse, 3) Foam again for lubrication 4) do NOT rise, but instead, start your hand wash mitts with one bucket method above. Lastly, I would recommend, keep track of which mitts hits the dirtier parts of your car (lower fenders, lower doors, bumpers) bc those mitts should be hand rinse or pressure rinsed before throwing in washer with your other mitts.

@ashc3765 Місяць тому

I use 2 buckets one for wheels and one for paintwork. Only use 2 mitts on paintwork but I give them a rinse with garden hose after doing each side. I wish my car weekly and live in a fairy clean environment so combined with good prewash process I get very minimal scratches.

@gyeonusa Місяць тому

Totally support this idea if.... one is willing to purchase that many high quality wash mitts! Its essentially combining the idea of a rinseless wash with a bucket wash. Also we always use foam in our pre-rinse step just in case! Keep up the quality content!

@johns4407 Місяць тому

Nice video. I have been going to 1 bucket late summer last year and into winter where I go to the Coin Wash bay place. Snow Foam with my IK e Foam Pro 12 and rinse then those Chemical Guys Chenille Pads (I got 3 of them) after another foam if I can. Chennille pads or mitts are best for washing a body on the car. I found on my first try of edgeless microfiber towels it never had the sudsy feel on the bodywork and they get caught on the grille and emblems kinda stuff on the car and would drop one once in a while.

@shnerp Місяць тому

Thanks for this video. I just tried and already love this wash method. It saved me considerable time not having to rinse out mitts wondering if they really are contaminant free. I have a mix of gyeon smoothie mitts and the same chemical guys chenille mitts you use. Curious about the possible negatives of using the gyeon smoothie microfiber mitts?

@b286guy Місяць тому

So good! Wow!

@zerograv1ty11 23 дні тому

I use a two bucket method, but I use four mitts. Two for upper portion of car and two for lower section. I start with the first mitt washing and about half way thru I flip the mitt over and wash the second half. Then go to bucket and drop off mitt and grab second one and repeat on second side. This way I always have a clean mitt.

@jasnapon Місяць тому

Nice garage bro 😎

@DMT267 Місяць тому

Stepped away from the 2 bucket con 12 months ago. A good pressure wash and regular cleaning, and a good pre rinse and foaming is the answer. Chamois can cause swirls etc as well. Blow drying is a huge change, especially when your car is ceramic coated.

@jamespiittmann1722 Місяць тому

Great video. I’ll be switching to this method. Off topic, but do you have a ceramic spray or coating for PPF that you’d recommend?

@tonyleung2442 Місяць тому

I have been doing this years ago. Save tons of time 😂

@iiTzSkeletor 9 днів тому

I’ve always done the two bucket wash but like you said it takes so long to scrub the mitt on the grit guards between both buckets before making contact again. Definitely switching to one bucket and ordering more mitts to make washing faster and easier. Do recommend still getting two buckets so you can toss the used ones in the other bucket then you can carry them to your washer to wash them when you’re done

@superstring101 Місяць тому

Great video! I've been using this method with a rinseless wash for about 5 years now. Same wash mitts (same car as well!). Thanks!

@BradRussell-tr3gk Місяць тому

Great video. ? What kind / size of wheels and tires are on that Model 3

@fyeofyeo402 Місяць тому

I get them from Temu for home use (not profesional). I just ordered 20 of them and will try this method. I just use a power washer to clean them.

@Swenser 7 днів тому

Sir. You are a genius. You have brought the term 'common sense' back in play.

@paulgyro 6 днів тому

The one bucket method also works great for rinseless washes too. Note instead of having to flip to all eight sides of the towel Mike Phillips recommends cutting the towels so you have just two sides to worry about.

@saul_bloom Місяць тому

I use the zero bucket method. Foam, Rinse, Foam, Rinse, Blow Dry. I never touch my paint except for stuck on bugs or tar. Same thing for the wheels (ceramics help). Of course, this method will only work perfectly if you don't let your car become too dirty.

@mikez6683 Місяць тому

I kind of do the same. 75% of my washes are no contact. Every 3rd or 4th I do contact wash.

@bGzzzzz 17 днів тому

I use the same method, just different process…rain, sun, rain, sun

@CThienV Місяць тому

I use the one-bucket method with 600gsm towels folded into 8 surfaces. I give each panel a light single pass to remove the majority of dirt, flip the towel and go over the same panel again knowing the majority of dirt is gone. Done. Repeat on the next panel. with 6 towels i have 48 fresh surfaces to work with

@Zoranurai13 4 дні тому

Tbh after i rinse off my car with bh touchless its already so damn clean. Then i use 1 mitt for the top,1 for the back, 1 for the hood, 1 for the glass around, 1 for the right, 1 for the left side, and 1 for below the lower body crease. Total of 7 mitts. I feel like this is enough. They never go back in either and when i rinse them out there usually isn’t much filth.

@Korruptor711 Місяць тому

I only started using the 2 bucket method last year, but after using the rinse once, the rinse bucket was dirty, so I was thinking either a 3 bucket method (wash, rinse, rinse again), which has a low cost, or do the 1 bucket method, which I know would be much better, but the initial cost is quite high.

@MegaSn0wb0ardJunkie Місяць тому

Hey Colton, I love your videos and I love using the Chemical guys mits...i use the two bucket method with two of these so I will also be getting a few more for my Ioniq 5. What do you use to dry the car? I want to make sure I have enough proper drying towels. I dont have an air compressor but I did just get the new Ryobi Cordless Blower with the 4 AH High Performance battery. What are your thoughts here??

@OutofSpecDetailing Місяць тому

Next video is my recommendation on drying techniques and tools! Stay tuned

@MegaSn0wb0ardJunkie Місяць тому

Awesome. Curious of your methods

@petesjk День тому

Do you use snow foam specifically, or just any prewash foam is good?

@TheRocky3211 Місяць тому

facinating method , definatly worth a try . whats your preferd cleaning method for cloths and wash mits after use ?

@OutofSpecDetailing Місяць тому

Need to make a dedicated vid on this!

@ancarazo Місяць тому

I clean my microfiber towels and drying towels with Rags To Riches detergent every time I rinseless wash my car. I don't use the mitts, but I use the DIY Detail legacy sponge or the Big Black sponge by The Rag Company, and they do a great job on my Tesla. Those sponges are the ones recommended for rinseless washing. No swirls or scratches on the paintwork, but then I ceramic-coated the paintwork and PP f'ed the front end as soon as I bought the car.

@chrisginoc Місяць тому

I have 4 vehicles at home I personally detail and maintain and have even ceramic coated myself. So basically with this method I can only wash one car a day? I'd have to wash the mitts immediately after contract so I either buy 12+ wash mitts or save the was mitts for the best car in our line up and the rest go with the fold microfiber towel method

@Darnellbrown91 Місяць тому

What do you do for drying?

@vinnym5095 Місяць тому

On another video of you washing the cyber truck, you use a brush with handle to wash the roof. Which brush is that and why do you recommend that and not use these washmit with a step stool?

@mickylindle Місяць тому

I prefer the no bucket method. Just use a softwash system: attach a 50-100ft hose and leave the tank in your garage or on your work vehicle (mobile detailing)

@jcruhrskov194 Місяць тому

So ... re-foam with auto-shampoo after a pre-foam wash? My auto-shampoo never gets foam-ish when applied after a pre-wash, so I've kinda skipped it again. Perhaps a stronger resolution would do? And another thing: The mitts you're using, are they not microfibers? Thanks for an inspiring video 😎

@spin_kick Місяць тому

Gary Dean method from YEARS back, but the upgrade is the wash mitts make it better.

@DAT-TEXAS-DUDE 23 дні тому

Damn buddy major fucking props for doing this type of work. You sir can wash a car better than most guys I work with at some place called Carisma Carwash in Corpus Christi,Texas

@thomyi Місяць тому

Do you have info on those wheels?

@SteveTesla-si6gn Місяць тому

Where do you get your bucket wheel cart?

@shepardsmith3235 Місяць тому

I think this begs for a comparison between this method and the standard one. And I might add significantly its critical that the surface has been maintained and is in a hardened condition that will shed water. Most people are oblivious to this. Its becoming a lot more popular with ceramic extenders. I used bead it up. But there are others that are plenty good. And I might add dont wait until the car is filthy. A regular washing is mandatory. I do it every three weeks or so because I just dont drive that much any more now that I am retired. Soo. If you wash regularly, use a ceramic extender. do a good prewash and apply a good coating of high quality soap with a sprayer and then use the stardard two bucket system, I really dont think you are going to see a difference. I also use a high quality pro air blower and this leaves an absolute mirror finish if there was one before. Just my two cents.

@JaimetheNomad 16 днів тому

One bucket makes sense. Also think about how popular rinseless washes are becoming. It’s essentially a one bucket wash and most people use one wash media, ie a sponge. I think most would agree rinseless washes are pretty darn safe too. Assuming you’re using quality soap/media of course

@mikez6683 16 днів тому

Honestly, I have used ph neutral soap and a regular wash mitt to do a rinseless on my truck and no scratches. I prefer and a dedicated rinseless, but if you are smart about it, you can skin this cat many ways.

@JaimetheNomad 16 днів тому

@@mikez6683 yup definitely many ways to safely do this!

@cometopoppa1 15 днів тому

What method do you use to wash the mits

@iroccamaronj Місяць тому

Off topic sorry. What kind of wheels and size

@DAT-TEXAS-DUDE 23 дні тому

Is yours a wash pad or wash mitt by chemical guys. Have you ever tried the Maguiars dual sided mitt?

@justaprankbro Місяць тому

Bunch of towels in one soapy water bucket, each to be single-used per wash. Got it.

@shelfcompact Місяць тому

I don't quite get it. Can you do a 30 min video?

@lewismartinez5130 Місяць тому

thought I was the only one who had trouble keeping track of the sides of the towels.

@kenvanriper4269 Місяць тому

Your washing the wash mitts correct in a washing machine when done? If so what soap are you using? My drying towels I use chemical guys towel soap. What about drying the wash mitts?

@whitegoodman7465 Місяць тому

Yes washing machine after every wash, no dyes, scents, fabric softeners (rags to riches, tide free and gentle, etc..are good options). Wash on cold or medium heat, dry in dryer on low or no heat, no dryer sheets.

@mocheen4837 Місяць тому

I use the two bucket method with microfiber mitts. The rinse bucket usually has black water from all of the dirt. I stopped using the products from Chemical Guys. I found that the Griots and Adam’s products worked better.

@whitegoodman7465 Місяць тому

If the rinse bucket gets that dirt, all that dirt is getting dragged across the surface even with a fresh mitt each time, pre wash is king no matter how the contact wash method is performed.

@jacktan7106 Місяць тому

I think 2 bucket method is still simple and straightforward for someone who doesnt have a pressure washer or foam gun or doesnt want to deal with multiple mitts. One bucket method seems like trying to re-invent the wheel to me.

@phat_gunpla_etc Місяць тому

maybe buy more sponges? are they cheaper than wash mitts?

@EVMANVSGAS Місяць тому

Coleton, when you wash all your mitts and microfiber towels what kind of soap do you use in the washing machine? I have read you shouldn't use any soaps with surfactants, like normal laundry soap.

@OutofSpecDetailing Місяць тому

I use P&S Rags to Riches

@lsufan861 14 днів тому

Pan snow foams first and rinses and snow foam again and then does the contact wash. Is that really necessary??? He only uses one bucket and one mit with the bottom scrub to separate the dirt particles.

@foys777 Місяць тому

I’ve always use one bucket wash system for my car.

@ghille-da-kod3217 Місяць тому

What if you do multiple cars in a day, wouldn't you need way more wash mitts?

@aesaphyr Місяць тому

I've used the method with the flat microfibre towel, and I don't recommend it. I definitely noticed scratch marks appear. And my car isn't even that dirty most weeks when I wash it. Feels a million times safer with the noodle mitt. The only downside is it does cost to buy this many good ones.

@whitegoodman7465 Місяць тому

The longer strands of microfiber mitts or pads seem to catch and hide dirt better than high gsm towels.

@fcv1967 Місяць тому

The way the towel bunches up is annoying in practice. I only do rinseless. The rags are a pain to wash because you have to presoak them. I think this year I will try the sponge.

@S2NAZ Місяць тому

How are you cleaning the wash sponges you used afterwards?

@whitegoodman7465 Місяць тому

Washing machine, wash microfibers by themselves with no other fabrics, no dyes/scents/fabric softeners. Dry on low or no heat with no dryer sheets.

@dietmarwenzel522 13 днів тому

Es nervt mich, dass die Waschhandschuhe danach auch nach dem Auswaschen unter klarem Wasser in der Waschmaschine sehr schäumen. Was machst du dagegen?

@adnanabbas6900 12 днів тому

I use one bucket with 5 wash mitts.

@dusty-vo8gh Місяць тому

I have different colored wash mites, rocker panel and wheel well wash mitts never get used for body panels. Wash separately.

@thedownwardmachine Місяць тому

I would love a video showing me how to wash my car when I don’t have a house and hose and driveway, like the vast majority of people

@SebastianSteele Місяць тому

Maybe a self serve car wash

@Dactylonian Місяць тому

Wash party at a friend’s house?

@nf3246 Місяць тому

Oc detailing has a good rinseless wash tutorial. I goto a manual car wash to rinse my truck off to get the big stuff then come home and do rinseless wash in the garage of my apt.

@goneincognito6275 Місяць тому

The vast majority of people don't have a house, hose or a driveway?

@TeslaMojo-Alt Місяць тому

I like the strategy, but living in Florida I worry about sand in the laundry from kid clothes will become embedded in the towel after a wash and scratch the paint. I use the two bucket method right now with the folds, and when done wash and reuse the towels for in the house.

@LSD04 Місяць тому

If you use a proper prewash you don’t need multiple mitts or buckets, I don’t see any game changer here.

@DJNoMask Місяць тому

Lol

@seeitrv Місяць тому

The 2 bucket method never made sense to me. This one bucket method is what I've always done. With a small car like the model 3 you can do the whole thing with 2 pads, especially if it's ceramic coated and kept fairly clean.

@DolipraneDude Місяць тому

Technically it's a 2 bucket technic. We can see them :-). Great video. It kills me to see people using those hash deadly automatic car wash.

@flyinb22 Місяць тому

Noting that you use a foam cannon - does the wash bucket with the multiple mitts have soap in it, or just water?

@whitegoodman7465 Місяць тому

Soap in the bucket as well.

@v8tergt653 Місяць тому

What about washing 5 cars in a row ? you would either need over 1k in mitts or have to wash the mitts and wait for that to be done between each car. Great if only one car is being washed at the time.

@seapen1 Місяць тому

Sure but if you have a business, it will pay for itself rather quickly based on efficiency, etc. and can probably be justified easily. I think the average person detailing their own car at home won't have this issue.

@v8tergt653 Місяць тому

@@seapen1 Issue is I have 8 cars, 4 motorcycles and 3 trailers which I all maintain clean, try to get thru them every other week and rotate 5 on the weekend is quite some work

@seapen1 Місяць тому

@@v8tergt653 I bet. But that’s where your time is worth a certain $ amount and maybe buying a bunch could be worth it based on how much time it saves, etc. In your instance though, maybe other options would be better too compared to this method. Either way, enjoy driving/riding :)

@cometopoppa1 15 днів тому

Hate to correct a good professional,but they are pads not mitts, your hand goes into the mitt

@tonymanasseh6662 Місяць тому

why not just use like 20 microfiber cloths?

@BK12344 16 днів тому

One thing he’s doing thts wasting time with the rag is he is staying on one side then flipping going back to the same side he’s cleaning, break the car down in sections….first top half then flip make ur way down then change towels. 4-6 rags tops is all u wld need…I only use 5 wash mitts and good to go

@theunkownmr.562 Місяць тому

I did the same as you. I relabeled those chemical guys clear buckets and i used the vinyl stickers from The Rag Company on both sides of the bucket. I too use a one bucket method now but that because i pre-foam, let it dwell, and then runse to get the majority of the heavy grime off.

@whitegoodman7465 Місяць тому

@OutofSpecDetailing Місяць тому

As I said in the video, if the car is very dirty, yes I foam, rinse, foam, contact wash rinse. When it’s lightly dusty there is no need for pre wash.

@shrmtales Місяць тому

The 2-3-6 buckets are only useful for one that does not have a pressure washer. Other than that is a method that must be discarded since when the constant dipping will end up making the water homogeneous with dirt and transferable between the 2 buckets. Any dip of the mit will cause a current making the trap useless since it can not open and close to prevent that. Whilst the soap bucket does not have as much foam. There is no logic for buckets since you can rinse with constant fresh water the hose or lowest setting of the PW the mitt or sponge and lay foam with the foam lance having both unaffected for cross contamination. Yes makes things slower however it way more contaminant free

@anthonyc1354 Місяць тому

skip to 5 minute mark and watch for like 30 seconds to save time

@andrewm8531 Місяць тому

If the car isn't that dirty, rinseless wash all the way

@anonimushbosh Місяць тому

For those who want to skip... He uses a new sponge for each panel. Oh and he starts with a clean car. Genius!

@longjohn5322 Місяць тому

I use 3 buckets and will continue. Regardless of what method you use, unless your paintwork is spotless before you touch it, you risk scratching it.

@tonyleung2442 Місяць тому

😂😂😂😂 mule

@longjohn5322 Місяць тому

Strong vocabulary 😂😂😂😂

@Built05STI Місяць тому

lol. 😂 way over kill.

@jeffmarks3218 Місяць тому

OMG I want to scream every time I try and watch one of our videos. You sure love to ramble on and on and on. Tough to get 2 minutes of information by watching 20 minutes of yapping.

@agood1280 Місяць тому

That’s the way I always clean with one bucket. I have 12 different wash mitts don’t use them a second time put them in the machine afterwards and save for the next wash 2 bucket Method is just pointless

@sakshammohan98 Місяць тому

@ScratchyBaws 21 день тому

Last time i used any bucket to wash a car was back in the late 70's early 80's. It's complete bollox all this 1-2-3 bucket garbage.

@dennisjendry3075 Місяць тому

8 sides out of a microfiber towel is ludicrous and is not good. Fold it into quarters and flip it ONCE, then toss it for another. You are getting the same coverage as the wash mitts. I've thought about going back to mitts but I just don’t see the point. If you are flipping your microfiber towels 8 times, you are washing your car with dirty water.

@whitegoodman7465 Місяць тому

Tried that and still had issues with towels bunching up and unfolding, a nuisance it was. Couldnt imagine using all 8 sides of a towel and trying to remember..real annoying. Now using multiple wash pads.

@ericsondergard4040 Місяць тому

Rediculous. Buy 7-12 wash mitts. Guys one will work fine. Rinse after each panel never had issues.

@garyclark6747 Місяць тому

Definitely more efficient than my use of the power washer to clean the wash pad.🧽 24:14

@snapchat7293 Місяць тому

As pressure washers are getting better and better (higher flow rates), there is no real need to worry about contamination. Your first rinse will get rid of 80% of the dirt. If you are really worried, use a foam blaster for the first rinse. Wash out the wash mit with fresh water out of a hose, then a bucket method. Use a seperate mit for the lower parts of the car (flip that one often and pull straight lines with it) Remember you have a lubricant on the paintwork, the chances of a swirl are extremely low. Foaming a car has also come a long way since the two-bucket method was invented. Now we have a thick layer of foam to protect the surface If you are washing a Lamborghini SVJ, just buy the 10 wash mitts 😂

@whitegoodman7465 Місяць тому

Ph neutral foam or just a water rinse with a pressure washer will not get rid of 80 percent of dirt, a high ph pre wash will but not just a rinse..not even close. Why not take the safest method you can and a pre wash the car properly followed by a 1 bucket multiple mitt/towels/pads is so far the safest.

@OraEtLabora0 16 днів тому

🤯23:55 "if you are stagnant and you are rigid" yet YOU don't do RINSELESS ! 🤌🤦‍♂🤯

@OutofSpecDetailing 15 днів тому

Rinse less is no bueno. If you have water, use it.

@OraEtLabora0 6 днів тому

@@OutofSpecDetailing there is less drinking water to go around and it will only get more pricey. everywhere, since climate is warming. Yvan, Pan, Eddie (and others) would disagree with you...since they are more accomplished, i see them as bigger authorities on this subject than you...