Лучше завода АвтоВАЗа😂 Респект 👍

In a sane way pockets of sane, 'non-digital reenforced' work will survive.

In Canada, I had to figure all that stuff out on my own without any internet, adult mentors, or money whenever my own stuff broke down and I had to get it up and running wherever it dropped. It's a relief to see it done right, full rebuild, with proper machinery and proper materials.

I done it myself, just because I could but wouldn't do it again. There are pretty cheap to buy with life time warranty .

Aha, that last part is the best I've heard in a long while. So on point! 🤣 😂

Late stage capitalism

US dont fix problems.. they throw it to trashbin.. build a new design..

Funny, I work hard every day running my own business rebuilding starters and alternators in the US. These guys are doing so much wrong I would have to reeducate them on how to rebuild. I understand they do not have much to work with but they are not even doing the basic stuff correctly. I have no idea where you live in the US, but around here almost everyone works hard and has this work ethic. But I am in a mid west farm community and you might be in a big city, and that could be the problem.

😮😢😮

😊😊😊😊

😊😊😊😊😊

😊😊

😊😊😊😊😊😊 AA😊

😊😊

And all the PPE they'd have to wear.

Ok will 😅be

ติดต่อ

Eles já constrói um caminhão completo é só pedir 😅😅😅😅😅

​@@dcolb121^😊

Good

It is not as good as new. He compromised the reliability in several ways. He removed the rubber waterproof insulator on the electromanetic winding, replacing it with a paper insulator whose insulative dimensions he determined by his eyes; he placed this paper on coil designed to carry hundreds of amps of current. Then to secure this insulative paper in place he wrapped a piece of clothe around the coil, that he then tried to waterproof with paint. You, the original insulator that he burned with a lot of effort, was designed to withstand the high temperatures in the coil. It was impervious to water. We do not know how well or long his paper insulator will withstand the heat generated by the passage of high currents in those windings. And then we do not know how well the cloth and that paint will sustain the same heat resistance. We do not how long that paint will last as the amateur spins in that enclosure. It works when new, but a motor is designed to be durable... What happens if the vehicles starter is placed into passed through water, and has to be started before the starter dries out????

you drunk sam?

Really well done 🙏

Thank you

Wellcome

заменили мало деталей, в основном все старое перебрано

@@maxleontev9552 А то что практически полстартера с новыми запчастями и ещё часть была восстановлена, это не считается? Там из старого только бендикс, редуктор и задняя крышка.

@@gjgjd5920 корпус, обмотки, якорь, валы, бендикс, втягивающее, все старое. Поменяли изоляцию на обмотке неподвижной, поменяли коллектор, контакты и щетки. Не заметил, меняли ли втулки.

@@maxleontev9552 Обмотку на статоре перемотали, голова новая, щеточный узел, коллектор, вал тоже заменили, там пол стартера практически заменили .

@@gjgjd5920 ок

Punya kenalan teknisi spt ini di Indonesia pak ?

Yes, thanks

I'll wager most won't know what you mean by "growler".

@@dcolb121 I even looked it up to make sure I had the right word. It’s been so long I hardly know what I mean?😉

Thank you very much

thank you 😊

офисе🤣

😊

😃

É admirável o trabalho que eles fazem com tão poucos recursos.

os caras fazem o trabalho com um cuidado e paciência, que não vejo ninguém da minha geração fazer ou ter curiosidade.