Raspberry Pi Tutorial (Model B+) - Using a Breadboard and LED’s

4 роки тому

Welcome to a new Raspberry Pi Tutorial series! This video will show how to turn on/off an LED using the pins on your raspberry pi model B+. Specifically we will use a breadboard, jumper wires, LED's and a raspberry pi model B+. We will start by creating a basic circuit using the 5V pin on our pi and then learn how to write code using python that can toggle the LED on/off for us.
Note: This should work for other versions of raspberry pi.
Playlist: • Raspberry Pi Tutorial ...
If you need the supplies you can get them from the kit down below! Or you can click the specific links.
Supply Kit (Everything you Need): www.amazon.ca/UNIROI-Breadboa...
Jumper Wires: amzn.to/2WxlSsx
Bread Board:amzn.to/2WuWzYd
LED: amzn.to/2MQ1u1J
Resistor: amzn.to/2XyUneF
Raspberry Pi B+: amzn.to/2Wt0QeR
◾◾◾◾◾
💻 Enroll in The Fundamentals of Programming w/ Python
tech-with-tim.teachable.com/p...
📸 Instagram: / tech_with_tim
🌎 Website techwithtim.net
📱 Twitter: / techwithtimm
⭐ Discord: / discord
📝 LinkedIn: / tim-rusci. .
📂 GitHub: github.com/techwithtim
🔊 Podcast: anchor.fm/tech-with-tim
💵 One-Time Donations: www.paypal.com/donate/?token=...
💰 Patreon: / techwithtim
◾◾◾◾◾◾
⚡ Please leave a LIKE and SUBSCRIBE for more content! ⚡
Tags:
- Tech With Tim
- Raspberry Pi tutorial
- How to turn on/off led raspberry pi
- Raspberry pi model b+
- Python Tutorials

КОМЕНТАРІ: 80

@TechWithTim 4 роки тому

Hope you're all as excited for this one as I am :)

@tbm5k 4 роки тому

Try making a smart mirror 🙌

@wanamir2497 4 роки тому

Ur awesome.... Thx

@harshavardhanakrishnakommu2555 4 роки тому

Can u make a video on raspberry pi set up

@lones-old-account 3 роки тому

This vid was helpful thx!

@the_kid777 8 місяців тому

Of course! I'm pretty sure I'm even more excited than you are!

@matiu7276 4 роки тому

Damn, there is basically everything on your channel, many useful things, love that man.

@TechWithTim 4 роки тому

;)

@pushpajitbiswas3752 4 роки тому

I saw many videos, related this topic but the way of your explanation is awsome and you covered all the details about raspberry pi, gpio pins, breadboard, register. Really good job man I like it.

@trevormontgomery6795 4 роки тому

Just got mine running today, impeccable timing

@ambrose5728 3 роки тому

Finally yes! I got my LED working and it was due to the problem with the library I was using. But you cleared this up. Thank you!

@Atharva_Vashist 3 роки тому

You teach almost everything, Thank you for your wonderful tuitorials

@kiravd5392 3 роки тому

OMG, been looking for these sort of videos for a while. Thank you for this series!

@shawngreene1 2 роки тому

Thanks Tim. You've helped me build my first electrical circuit :)

@bruskis8685 4 роки тому

Thanks man! I look forward to more tutorials, I've had a pi for a few months but haven't been able to use it. This really helped!

@TechWithTim 4 роки тому

Glad to see it helped!!

@giannismakarounas5966 4 роки тому

You are getting updated so fast I realy like it

@stevebaryakovgindi Рік тому

thanks, 3 years after, this was just what I needed, that the breadboard is a long row for power and short columns for putting stuff and to connect the GPIO into the power. That's what I wanted and that's what I got!

@avvn9331 4 роки тому

Wow this is awesome sir, thank you..., thanks for making this easy to understand. This is exciting sir..

@devprakash5320 4 роки тому

Actually I'm an electronics student and I used to hate raspberry pi , but u made it quite interesting for me ... Thanks

@JamesHertan 2 роки тому

Thank you for the video. It was very helpful!

@MaddaloniBruno Рік тому

Great video, thank you for taking the time to record that! 💯

@alimihakeem841 6 місяців тому

Thanks for this great content. It's really helpful

@abdulsalamaboubakar4059 4 роки тому

Tim, check out the particle photon its really nice the way it uses wifi to flash ur code without the need to connect ur device back to the pc to update the code!!! looking forward for more vids like this good luck

@raffy_rodriguez 4 роки тому

i've been coding for years - this is the first time i've ever written code that affects the physical world

@R3IMYSS Рік тому

Congrats on the 1mil subs my man. :)

@1377sv 4 роки тому

Excellent video...thank you

@zacharyjuhlke6541 4 роки тому

Yay!!! I have been waiting for a raspberry pi series I've had one for about 6 months they are so cool!

@luisblum4416 Рік тому

thank you very much 😊

@propolipropoli 2 роки тому

I love this video thanks

@trad3mark394 4 роки тому

Would the TI breadboard pack work with the Pi

@mdmarcaassport 3 роки тому

good video. i encourage you to do more videos on your raspberry playlist

@tudor-4222 4 роки тому

Hey sorry for off topic as this is a video for raspberry but are you going to do a tutorial on the written digit recognition application on neural networks? Would be awesome

@GameplayCrush 4 роки тому

So if i understand your initial explanation of the rows correct, you don't actually have to put the resister in the same hole as the led right? just the same row. Thank you for making this video

@nathanedwards3057 3 роки тому

Great video man, new sub here 👋

@ima9969 2 роки тому

THANK YOU. I was super close to fry my pi 4

@luca-cj5nn 7 місяців тому

Thanks a lot it's perfect ! Tried the 5V without the resistor and burned the led ahah

@brodecoder8893 2 роки тому

thanks

@sainco3036 4 роки тому

thanks.

@lennoxreid4188 4 роки тому

You should do a raspberry pi video on the RFID sensor

@xyaman425 4 роки тому

Awesome!

@rajdave9862 4 роки тому

omNS Bro, please reply to me. from where u learn this all module or library please tell me

@MS-wr4xs 4 роки тому

where can i find the pinout for raspberry pi model 3b+ (2017)

@davidm3210 2 роки тому

Very nice, thank you. Can you recommend a manufacturer for a beginner breadboard, not too tiny for my middle-aged eyes?

@gitarmac Рік тому

There are full size and half size depending on the number of pinholes. The holes and numbered rows are tiny regardless of the size of the breadboard. I have the same problem, I have a large square magnifying glass I use constantly and even then sometimes it's a challenge. I use large flat tip tweezers or needle nose pliers a lot to put those little wires in. Sometimes when my circuits don't work I get out the magnifying glass and find I'm a hole off. Hope this helps. :)

@ClaytonXL1 2 роки тому

Is there any way to do this without using a male-to-male cable? I only have male-to-female. Asking regarding the thing you did in 9:28. Help is greatly appreciated

@hemitpatel4758 3 роки тому

My birthday is in 2 months I have been coding for 3 years now and I am going to get the raspberry Pi to make a diy NAS can I use to that for this project too?

@ThreeDubs 10 місяців тому

10/10 niceeee

@odinburk347 3 роки тому

could you do the same things using java?

@lukashanak4042 4 роки тому

Does this actually works with Raspberry Pi 4?

@arkasaha2156 3 роки тому

❤️

@bolics6560 2 роки тому

Quick question will this work with a raspberry pi 4

@camaronruss9476 2 роки тому

How do I get idle python?

@paraglide01 4 роки тому

Hi Tim, if you put your hand behind the object your camara will focus on the hand and the object.

@TechWithTim 4 роки тому

Thanks!

@arjunsahlot Рік тому

My light has 4 wires coming out of it. How do I wire that?

@dev4life 4 роки тому

can you make a video for the installation of raspbian OS?

@CurtisPurnell 4 роки тому

Dev I doubt you still need this but it should come on the sd card with your RP. If not you can use an sd card reader and another computer to install it on the Sd card.

@tbm5k 4 роки тому

Try making a smart mirror 🙌

@bruceblosser384 4 роки тому

the resistor is there to restrict the current flow into the LED!

@ammaral-harazi1235 3 роки тому

I noticed that too

@jimhalpert9803 4 роки тому

I don't have a raspberry pi but would you recommend getting one ?

@TechWithTim 4 роки тому

Ya it’s awesome! You can do some really cool stuff with it and it works as a Linux server

@ammaral-harazi1235 3 роки тому

10:15 The resistor value was too high (generally a value between 220 - 250 is good) so its difficult to see the LED. Remember the more resistance the less current

@hadimasri420 4 роки тому

hello my friend i have a question for you and it's the following: can i build a simple android app using python?

@ayubomaraden867 4 роки тому

Yes, you can use kivy he has tutorials for that too

@yaqoob1972 4 роки тому

does this work on aurduino?

@TechWithTim 4 роки тому

Yaqoob Tech yes

@depressedyouth 3 роки тому

I didn't used resistor. My LED fused up

@ImmortalBest 4 роки тому

I have an arduino )

@intellichicken144 3 роки тому

Heed this man's warnings and use a resistor! I didn't and it burned out the light I had.

@staticbits 4 роки тому

Grammerly sees your title: Grammerly wants to know your location

@TechWithTim 4 роки тому

What’s wrong with it 😂

@staticbits 4 роки тому

@@TechWithTim Oh wait, nevermind I just pronounced LED like lead instead of L-E-D

@codingboy2254 3 роки тому

bro you did a mistake , use said that the shorter leg of the LED should be connected to the ground or "Positive" , which is actually negative.....................

@gitarmac Рік тому

I noticed that too.

@zelioz848 2 роки тому

Usually you don't want to remove the resister. The resister is protecting the led from high voltage, if the current has too much voltage the led can burn out. You were only able to do it here because the led was able to handle the small current flowing through it. I'm only saying this because you were acting as if assuming people didn't know how electricy worked, so i don't want new people to try this with regular voltage on another project and fall into the same hole i did were i broke like 15 leds til i realized the importance of resisters. They limit the currents the led can handle it, any new people should look into ohm's law to know what value resister they should use.