RC Drift SUSpension Tuning!
Переглядів 1,250
2 місяці томуShowing everyone how I build my RC Drift Car suspension, this is always a subjective topic as everyone runs different chassis with different electronics and different bodies and so on. In this video I am building a set of shocks for a new prototype chassis that I am designing to body roll as much as possible so I’m intending to have a much travel as possible with these shocks and mounting positions. This is being demonstrated on a ReveD RDX rc drift car chassis, I’ll be making a future video on the development of this new chassis idea I have along with my thought process when designing something like this rc drift car chassis build.
Thanks for watching, make sure you give this video a thumbs up if you like what you see and subscribe for more awesome rc drift content!
@DesertRockCrawler 2 місяці тому
I just picked up a set of these in purple for my rdx. Keep up the awesome drift content.
@shredcraftrc 2 місяці тому
Awesome! Will do! I have a new chassis for the RDX coming out soon!
@theissofkaltenbrun9043 2 місяці тому
Nice bro! The ReveD o rings work well in the yoks They actually advertise them to suit the yok big bores Nice editing too BTW
@shredcraftrc 2 місяці тому
They sure do 🤙
@Brevdrift 2 місяці тому
Good stuff sir … that curved ball cup is genius learn something everyday
@shredcraftrc 2 місяці тому
Glad to share some ideas!
@thedriftfather4563 2 місяці тому
Are you doing a load transfer style tune ? With the high bat and the spacers on the front nuckle ?
@shredcraftrc 2 місяці тому
Yup, that’s the plan!
@MrMikeAlright 2 місяці тому
Great edit man, I struggle to get the shaft to pull back in like yours do, it’s something I fluked once building the RDX stock shocks, is the trick to stop threading the top cap halfway, push in the shaft then fully tighten like you did? How you finding the load transfer setup?
@shredcraftrc 2 місяці тому
Yes that’s how you have to bleed diaphragm shocks for the feel you want. I’m doing the load transfer myself and figuring out what works best on this chassis.
@MrMikeAlright 2 місяці тому
@@shredcraftrc thanks buddy, will try that on my toplines I have bought for the rdx 👍🏻
@ock105 2 місяці тому
ReveD red o-rings vs Yoko blue o-rings?? Trying to eliminate some of the sticking with Yoko big bores(O- rings lubed with green slime).
@shredcraftrc 2 місяці тому
Red ones have worked fine for me, these are from my RDX kit.
@ock105 2 місяці тому
I'll try those next..also gonna try some aftermarket shaft guides@@shredcraftrc
@Brevdrift 2 місяці тому
Red Reve d o rings are money good luck finding some seem to sold out everywhere
@shredcraftrc 2 місяці тому
@@Brevdrift gotta buy an RDX to get em these days!
@Jacobp_RC 2 місяці тому
I dont understand how people have problems with these shocks🤣
@shredcraftrc 2 місяці тому
Right, it’s a super simple design.
@Jacobp_RC 2 місяці тому
@shredcraftrc exaaactly, man i re build my shocks every couple months just to keep them clean and never have an issue. Just bought another set and no issues😅👌
@shredcraftrc 2 місяці тому
@@Jacobp_RC yup, never really seen anyone have problems with them, hence why they’re my go to.
@codyskyrimvolen 2 місяці тому
I'm having issues. Using blue orings they just leak out after a few sessions. I've used green slime and everything. Only shocks I've ever owned that have been like this. I have a set of Tamiya trf shocks I built 10 years ago that still have their rebound.
@DJ.1001 2 місяці тому
Yokomo Big bores are junk. The shaft guides are sloppy and the internal surface is rough. They are the worst aluminum shock I've ever built. Even yokomo plastic shocks are far smoother and less sloppy
@flatlander7288 2 місяці тому
Your poor O-rings. Where is the O-ring grease?
@shredcraftrc 2 місяці тому
It’s in the video! I literally put it on, and threaded it on the shaft, my fingers were oil when assembled so I might not have typed that.
@flatlander7288 2 місяці тому
I saw it now. You put it on after you set the O-ring on the shaft. Which is too late in my book. I coat the rings in grease before I put them on the shaft. The threads on the shaft can cut the ring otherwise. Everything else looked spot on. Great video, keep them coming!
@shredcraftrc 2 місяці тому
@@flatlander7288that’s why I titled this how I build shocks, I see most people build the lower cap and push the piston through the assembled o ring and shaft guide. I never had an issue and as I always say, shocks are subjective for your car.
@bakko9302 2 місяці тому
@@flatlander7288 I never let the o-rings touch shaft threads. I use a small plastic cylinder you can find on some artist paintbrushes in the craft store. Simply slide it over the shaft threads and then slide the o-rings on the shaft. That way the o-rings are never in contact with the shaft threads at all.. ;-)
@shredcraftrc 2 місяці тому
@@bakko9302 that’s some artisan style effort right there.
Ми - Україна
Переглядів 540 тис.
Євробачення Україна | Eurovision Ukraine official
Переглядів 666 тис.
ЗупиниЛося
Переглядів 377 тис.
Comedy Club
Переглядів 4,4 млн
Timmy Woo
Переглядів 45 тис.
Гаражанин
Переглядів 1,3 млн
Van Dronewerk Agro
Переглядів 2,5 млн
vertilnews
Переглядів 3,8 млн
cartierr1k
Переглядів 16 млн