oh my god I remember watching him when he was like 13 he's a grown ass man now damn

When I built my first nitro back in the 90’s and ran it for the first time I was totally hooked. Electrics became toy grade to me, no matter what kind of speeds they have been able to achieve nowadays. I completely agree that if you are a person who lacks patience and or is unwilling to spend time tuning and tweaking your RC car, then stick with electrics.

I love this guy I ordered a nitro a couple weeks ago and I've been watching a lot of videos on nitros and this guy is my favorite go to person about nitros I know you see this rcbiker thanks so much man your such a good youtuber and deserve more credit then some of these other guys on this site keep it up.

Great job there champion keep these videos coming I’m just getting into the hobby much appreciated

Just ordered one buddy. Super excited. I'll be in touch in sure. Owned one years ago and well it was à nightmare. I think I'm ready for it now.

Thanks just got my first one its pre-owned and you're vid helped lots!

You can’t beat having a nitro engine as opposed to a boring plug & play electric, great you have got back into it & hopefully breath new interest into this hobby side again! 👍🏻

I could have used this a few years ago, would have saved a lot of stress and cash!

Very informative mate 👍 always enjoy your content . We couldn't have better weather for getting out the RC cars at the moment .

great video man feel so relieved looking at this video thanks so much for the last tip

I love the maintenance , thank you for this video❤

Great videos buddy and I’ve been watching for about 7 years , I did sell them all , petrol , nitro etc , but missed the nitro sound and smell s , so I purchased a hyper 7 off eBay , always loved the hyper tbh 👍🏼 well now I’m back up to 8 rc s and the wife is not to keen but it’s a great hobby , keep the vids coming

Nice to see you're back with more great info👍

Man, I just got my nitro rc as a gift and when it wouldn't start, I panicked, and I don't think I did the break in process too well lol, but I sent it in for a check up, you made me feel much better🙏. All your videos that I have helped me so much, I am very devastated to see such an awesome youtuber and person like you gone, for as long as youtube exists, your videos will be such a help to all newcomers and professionals as well! God bless you man 🙏, and yes, as you said, life....goes on.

Another informative video! You are right when my first time I panicked but things going good all the way, just need some patience. 😁

I did a Sub. I'm waiting for my HSP Backwash buggy and I'm learning a lot from your engine tune videos. As a kid I had many Cox 049 motors in planes and an airboat and a RC F1 car. But later on a 2nd hand Duratrax Evader locked up on me. No manual came with it....so I'm sure it was too lean. Now I'm catching up on tips so I don't lock up the HSP

Started the hobby from watching you channel superb work mate 👍👍👍👍

Great video for beginners 👍🏻! Keep it up

honestly would of snapped the pull starter if i didn't watch this video! Thank you! this helped out a lot.

very helpful thank you much !

The nrb5 manual is actually really good, even to a point of a sense of humour. It's a fantastic first buggy, fully recommend it. As always great video!

Thx for tips. Just bought my 1 nitro Kyosho alpha2, not new. and i think i will need to watch some videos. Subscribed. Btw nice birds sounds you have there😂

thanks for the video

Great vid bro thx

I would definitely need you help and advice. I just ordered my first one. Kyosho Inferno NEO 3.0 Type-3 ReadySet 1/8 Off Road Buggy

First, very goood videos i must say the way you explain things are really good. i am having a hard time starting my red cat vortex ss truck its my 1st rc car and its really fun just trying to figure out why its not starting. very new to the hobby

So happy your back bro and your subs are flying up man keep it up bro I’d like to see you buy a kyosho truggy rtr or buggy show us how it’s done probably and you get to treat your self

Very basic but very very important regardless. Good video.

Hi im just wondering how do you now what the deafult setting is? Is it smalls number you can write down or is it a spesific location the screw thing is on.

Top advice

Love the body on that buggy! Way beats the cab forward boxes of today...

These are fantastic Videos as I have very little knowledge so far. I am looking at getting started in RC Nitros for the first time and quite fancy the 1/8 scale HPI Nitro Trophy buggy. Would this be a good one to purchase or is the maintenance and skill level a bit too high for a beginner?

i like really like this video but i just hoped i watched it earlier. bigg upp bro

Hi mate, I have the hyper ss truggy, am now melting the silicon tube! I have adjusted the high speed needle, and the low speed needle only- running good it got the hyper30 turbo motor- I’m wondering if it’s the fuel- I have put a ltr through it and all good, then I purchased a 4ltr bottle and now seem to be having issues - same brand of fuel & 20% Cheers

Hope you can help me ! Got an older buggy that needs a new coil and suitable fuel can you recommend any combos to me ? The engine is stamped 21c and the only marking on the Coil is 99 or 66 ? Regards

All of your nitro content are really well thought,love all your rc video since 10yrs back. Can all nitro engine be reset flush on all lsn and hsn if the user doesn’t know the current settings

Lol all grown up yes my lad used to watch yr vids way bk .. keep them coming

The most important tip was the last one. :D

Just got my first nitro buggy and ran 3 tanks of fuel at idle. Then ran it a few tanks with the restrictor plug in big rubber bulb whatever that’s called lol. Then removed that restrictor and ran it normal. Is that a good enough break in?

I’m 11 I’m installing a ke21r in my kyosho 111p9 tki3 any tips and is it as simple as it seems?

Thx ill use these tips/things to avoid with my stampede. Also i got my car used and never broken in but it was barely used.. is it too late to break it in

Thank you for the video. Just ordered a Nanda Nrb5 after watching your videos. Did you have to check for lubricant in the diffs at all or is it ok from the factory?

Thanks for you amzing videos, just about to purchase a buggy so I will not be making these beginners mistakes Haha. What's the best fuel for this car ? Thanks Scott

Great video sir . take care

hey so I got my nitro and it wouldnt start with 25% but as soon as I put 20% it started right up and when it got empty I put the 25% again and it wouldnt start again so does that mean it doesnt take 25% at all or do i need to do something different for it to run on 25%

Just got nitro buggy what glow plug would be best it's 1/10 or 1/18 scale or so like change air filter and put fuel filter on it this the car type Stadium Truck ST RC 2WD Rush PROtech Truggy 1:10 SCALE xxNT Rc10GT.

I had a nitro car when I was a teenager was too reckless back then thanks to this video il be looking to get a nitro car again

I'm very new to the hobby, I'm no stranger to working engines but my problem is I have a ofna that was given to my boy it came with a starter box. My question is can I put a pull start on it? I can't get the box to turn it over

Hi @TheRCBiker, My starter cord knot always pass through the hole. How can I fix that please ?

To anyone getting in to the nitro hobby i would recommend getting a failsafe just to be safe incase of a runaway 🤟😊

hi friend i want to ask i have rc car motor vertex 21 engine I'm looking for an rc nitro head and I have this problem, I can't find it anywhere, could you give me some advice? only head from vertex 21 purple Thank you for your help

I am just getting into this, I am very mechanical but have no knowledge of these gas powered RC cars, any advice would be appreciated

Great content ✊ is that a Magpie singing?

I broke my pull starter once and didnt retract so i took it apart and kept the bearing and i got a longer string and attached to it and made it easier to turn on and felt torquier for some reason

I need some seriouus help with my rc 10 gt stadium truck can you help me I bought a.21 nitro motor is it possible to install in my old rc 10

I got an sh18 nitro and it looks like unburnt fuel comes out the exhaust. Is it running rich?

I’m new to the hobby , I got me a nitro slash and I think I flooded it n moved the needle to much what should I do ??

just getting into nitro cars i have a question i purchased a 2nd hand hsp 1/10 vx.18 engine and the car was massively out of tune i have no reference for starting points no user manual etc on the hsn or lsn needles i have watched some of your videos on tuning the needles but i was wondering if you had any advice for properly tuning a car with no starting point or reference the car does start but didnt when i purchased it i followed your video on turning the lsn 1/8 turn to stop it quiting when the ignitier was removed and it now stays running without the igniter attached where would you recommend i go from here also turning them off i have been using the soft side of a screwdriver to bump the flywheel too turn it off is this ok? would it cause any issues

When I got my first nitro I had start problems checked everything in the manual and on your channel turned out my flywheel was grinding against my gearbox. That took a while to figure out🤣

G'day mate. Can I extend my receiver Ariel by adding a bit more wire? Truth b known i cut it and now it's short. U reckon I'll get my range back by adding sum on. Dam

Hey dude, quick question. Do you ever use a temperature gun and how much should I be using this as I'm learning to tune? Thanks.

Hi what is best first car for beginners plz name and model will help and why is good for beginners. Thank you

I am gonna buy a second hand nitro and im new what do i need to look out gor

hey man, any chance you would know the default carb settings for that buggy? i have the same one and i messed with the lsn and can’t get it running again, it’s cool if you don’t. would be much appreciated though. thanks.

I'm new to nitro/ so what fuel do I start with thank you vary much cheers mate 👍👌

Hi mate just a quick question I just bought for my buggy a Schumacher Nitro Engine ZR.28 Spec. 4 Pullstart what fuel would be best to run it on?

U have link to that buggy ?

Hey I have HPI rush evo. Is working great but I want to know why the engine cutting off after press the break even I change the glow plug.

Hi with the breaking engine procedure can I have the car on stands and have the wheels spinning freely ?

I’m thinking of buying a cheap RC buggy. I live in Australia so it needs to be able to withstand some dust and rocks. My budget is $300 AU preferably $200. Could you please suggest a buggy? I was thinking maybe the VRX RH1006?

I just got the hsp 94106. Can I break it in with a 25% nitro fuel? Thank you. 😊🙏

Hi mate is there any other way to contact u directly for an easier response on my cars I have that my wife and I are learning on ?

What if you have messed with the carb screw? And flooded the engine and ruined the filter which I had just oiled.

My biggest issue is not knowing if when I did my run in was I too easy on it or too tough haha .. I thought I was too tough then watching a million videos I seem to be getting the right results I just don't know if I'm flogging the thing haha

Hey man I saw to shoot you a message if you’ve got a problem. My f4.6 v2 will idle but runs bad, if I adjust the tune it’ll run but but out with wide open throttle and won’t idle. I really have no clue what I’m doing wrong with it

Hi again josh. Bought a loco 3.5 Rossi engine. Do I use a 4pin fly wheel or a 3 pin fly wheel? What do U suggest? Cheers nitro newbee

What is the best reliable engine to put in a 1/8 scale buggy and also what is the best fuel .

Wassup the rc biker. I have a 17 year old mach 28 that is kinda broken. I put fuel in it and use a very hot glowplug but it doesn't even make the sound for when an engine starts.

i have a tmaxx 3.3 should i upgrade to the O.S 21tm motor? is it worth the value? im at the end of the life of this motor so im in need of a replacement .

Hi Josh. Got an electric 1/10 car. Running a "wolf pack 4200 7.2volt batt. If I get a stronger batt, will that bigger my motor? How high volt can I go. Cheers drew

Hi mate. Why glue U recommend for my new rims and tyres. Cheers bra

Do i run my nitro rc car engine in with 20% or 25% nitro fuel?

when I buy a new nitro car Should the first thing i do with it is a break in?

I might need your advice later on my nitro rc car is new so I need advice on how to tune it

hey TheRcBiker i have a problem with my nitro it keeps blowing glow plugs any fixes?

I wish I could get the timing of the engine down where it stays put when I put the accelerator forward etc etc I haven't run it for 4 years heated it up started first time but the timing is completely out I'm a novice if I can sort that out I'll be completely happy

do i have to run the car like once a week so the engine will be okay?

I wish I had more nitro people to hang out with just got a Losi 8t did the proper break in & tune “I think” it seems to run real good smoke trail all the way from idle to full throttle no cutting out but it’s getting hot I don’t know if it’s tuned right I don’t know what to look for or sound should be?

Hi again tuning in from australia

Hey I have a Hyper7 TQ sport and I got it two years ago I drove a couple times but I haven’t this year and I forgot how to tune it

I still trying to get my t maxx up and running,it’s been problems after problems,still can’t get idle right,thing reves like crazy, I bought it used many years ago ,never ran it ,ordered new 2.5 racing engine,still having issues ,

Looking for some help, I'm looking for someone to rebuild my hpi bullet nitro.

Okay so I have an Traxxas ez starter rustler with an .15 engine and idk why but when I push the button on the ez starter it makes an nosy but doesn’t start what should I do

I left my batteries on my car on over night what might be the problem looking to fix it!

Hi my Son bought his hyper habao recently hving a problem starting it ...he put enough fuel n on the piston...not sure why it's not starting....the both of us excited to get it started....how can u help or tell us what's wrong...will appreciate the feedback ..God bless u🙏🙏🙏

Hi , I m new on nitro rc car , however I have HPI G3.0 engine on my HPI RS4 MT , the engine spits fuel through the exhaust , I did play with the needles before I turn on the engine (which is a brand new engine that needs to brake in) but even though the LSN is almost close , the engine still spits fuel and also , if touch the accelerator , just a bit , engine will quite

Hi again! My son want nitro. Do you have some suggestion for a 1/10 robust model? Resistant as can get with reasonable price to jumps and some bumps (1st i'll trim the throttle, but it is a very curious boy). He already made plans to use his 3d printer for some parts =)))))

Hi mate. If my 2speed 1.10 war head is missing a dog bone on front end, the engines running, throttle is on, spur wheels are turning but car is still stationary even on high throttle? Appriciate your help bra. Cheers nitro newbee

If i run my rc truggy on 25% nitro and changing my fuel to 20% nitro do i have to tune it again?... what needle should i probably look at to?... do i have to lean it or richen it?... from 25% to 20% nitro...

You've come a long way from your early video's. This one is much easier to watch. Not sure why UKposts keeps recommending me your videos though...