Remote Voltage Monitoring System Using ESP32 and ESP-NOW
Переглядів 11,247
Місяць тому📹 Description:
Using two ESP32 devices, we'll set up a system where one ESP32 measures the voltage of a solar system or any other electrical setup and transmits this data wirelessly to another ESP32 located remotely. The ESP-NOW protocol enables seamless and low-latency communication between the devices, making it ideal for real-time monitoring applications.
Both receiver and sender run the same code, which was the hardest part. If you don't want to struggle with libraries, settings, and board definitions in Arduino IDE, you can upload my firmware using this JS esptool made by Espressif. espressif.github.io/esptool-js/
Before uploading please set adress to 0 and after uploading please reset your board.!
🔗Links:
🔧Parts:
M5Stack M5Dial : shop.m5stack.com/products/m5s...
M5Stack Voltmeter Unit (ADS1115) : shop.m5stack.com/products/vol...
🛠️CODE: github.com/VolosR/remoteVolta...
☕️ Support me on:
KO-FI ko-fi.com/volosprojects
PATREON: / volosprojects
👍 Don't forget to subscribe, like, and hit the notification bell for more IoT and ESP32 tutorials!
#esp32 #espnow #iot #arduino #remoteVoltage # voltageMonitor
@einsteinx2 Місяць тому
Man I’m continuously blown away by the quality of your UI design on these projects! I absolutely love it!
@VolosProjects Місяць тому
Thank you.
@cdoublejj 29 днів тому
actualy UI with graphical indicators and not just flat shaving with three dots and hidden menues
@nguyeny275 3 дні тому
The design is awesome, @VolosProject, can you share more about how to design UI for this M5 Dial ?
@Hurricanepkt Місяць тому
The M5 Dial makes these projects look so good. I'd love to see a tutorial on making a menu for one, so I don't have to decide which thing I'm going to do with mine
@scome98 Місяць тому
Starting up the weekend with a new Volos video and my coffee in hand is awesome. I'm about to setup a solar system and will try this out. Thank you!
@silverback3633 Місяць тому
Excellent job worthwhile demo for others to develop ideas on these round touch displays and the ESP NOW.
@TimHayward Місяць тому
I just use the broadcast address (ff:ff:ff:ff:ff:ff) for all ESPNow communication. You lose error checking and encryption but you don't need to worry about addressing. If you need encryption it can be done in the app. This also allows an unlimited number of nodes and it is much simpler to implement.
@VolosProjects Місяць тому
Thank you i did not knew that.
@philipershler420 Місяць тому
Your presentation about these devices was very complete and easily understood. Thanks!
@user-pg2ej4et8o Місяць тому
Another great video! Always interesting, informative, and inspiring! Thanks again for sharing!!
@mysticmarble94 Місяць тому
Boo, wake up ... New Volos upload 😲
@adrianobueno6984 Місяць тому
Another great project and video, thanks!
@str0g Місяць тому
Keep up the great work. Ur english is fine!
@dcmotive Місяць тому
I wish these were waterproof. Nice design!
@VolosProjects Місяць тому
Yes that whoud ve nice.tnx
@elsocio666 Місяць тому
I would like a transmission oil temperature gauge with a device like that... I love your projects!!!
@IndependentNewsMedia Місяць тому
Nice video. Happy Easter, God bless.
@VolosProjects Місяць тому
Happy Easter.
@fireteamomega2343 Місяць тому
You definitely have the interface graphics programming mastered. Something like that would take me weeks.
@leehewitt9559 Місяць тому
Love it 👌
@WaschyNumber1 Місяць тому
Very cool 👌
@kevinlieb Місяць тому
Could be interesting to get into how you make such beautiful UI's: technique, use of color, library, dotty font of those numbers, etc
@kevinarbour962 Місяць тому
ESP Now supports multiple slaves to one master and transmits telemetry. Have you consider having several voltage sensors providing readings to one master display and displaying rotating sensor voltage readings? There are many applications for a single console and multiple sensors. ESP Now master searches for multiple slaves and discovers the MAC addresses as part of its operating mode just as Bluetooth.
@TimHayward Місяць тому
I just use the broadcast address (ff:ff:ff:ff:ff:ff) for all ESPNow communication. You lose error checking and encryption but you don't need to worry about addressing. If you need encryption it can be done in the app. This also allows you to support an unlimited number of nodes.
@clementyap1009 Місяць тому
wow nice!
@bob_mosavo Місяць тому
Thanks 👍
@VolosProjects Місяць тому
Thank you too
@ShubhamGupta-iw6hc Місяць тому
Can you make a navigation device using this round displays, which shows a small map with direction, can be useful for bicycle, etc.
@nishad2m8 Місяць тому
Nice ui 😍
@VolosProjects Місяць тому
Tnx, yours are also great :)
@wellerweller1499 Місяць тому
Could have also used the dials rfid functionality to read the mac address for easier binding.
@djokinac Місяць тому
sta reci osim da je i koristan projekat a i dobro izgleda komplimenti svako dobro
@VolosProjects Місяць тому
Ajd pogodi tko je dao ideju?
@djokinac Місяць тому
@@VolosProjects mozda ja ali opet nisam siguran inache bi mi bilo zao da drzim jedan taj modul napolje a ineche neznam kako reaguju ti displeji na tem recimo od -12 do -15 koliko je kod mene nekad zimi nisam testirao ni oled a inache mislim da sam video i kod tebe u jednom klipu panel da l ibese vrteo razanj ili sta bese nisam siguran
@VolosProjects Місяць тому
@@djokinac tocan odgovor... ako je na suhom mjestu ne smeta mu niska temp, projvereno ja sam ovu zimu palio lampice sa slicnom plocicom, par noci je bilo -20 i sve je radilo
@djokinac Місяць тому
@@VolosProjects ha da ne poverujes da radi i na -20 inache da se ja pitam a inache uvek se zena pita 🙂 ja bi na panelima stavio jedan obican esp32 a u kuci ovako lepu napravu zalosno zauzeti ovaj modul a pogledas ga dva puta godisnje
@guidanceh9381 9 днів тому
how small voltage can it measure.. e.g. can it measure few mV to few 10s of mV
@davey2k12 Місяць тому
Make one that monitors multi cell battery eg 12s like a BMS does love the design Need one that measures up to 100v DC 😂
@332ARA Місяць тому
I have a T-Long that I'm putting in my car to make gauges. Is the ADS1115 what I need for dash voltmeter?
@VolosProjects Місяць тому
Yes 😀
@williamlyons2418 29 днів тому
Hello, great project! Thank you for sharing the source code. Could you please verify the ESP board type you compiled the code with? Also could you specify which libraries you used. So far I had identified: TFT_eSPI, M5Stack, ADS1115. I am getting errors about a missing header file. Are there any other libraries? The missing header file is ADS_1115.h thanks!
@VolosProjects 29 днів тому
Board is m5dial, you have link in description. This code wil not work on other boards and it will not work without voltage sensor.
@giusepearturo Місяць тому
please make a integration with home assistant
@giusepearturo Місяць тому
and esphome
@kellymoses8566 Місяць тому
As a network engineer the way you formatted the MAC address triggers me.
@kobs9636 Місяць тому
dont forget to breathe
@alejandroperez5368 Місяць тому
Please, consider not tapping with your finger all the time. It is distracting and annoys people with OCD xD
@VolosProjects Місяць тому
Yes i know, i already recieved few comments about that, but i am sorry i cant control that
@alejandroperez5368 Місяць тому
@@VolosProjects Wear a high voltage ring on your index finger with an accelerometer in it, if you shake it, you get shocked xD
@fireteamomega2343 Місяць тому
@@alejandroperez5368 Consider not trying to change others to ease your own psychological nuances.
Andreas Spiess
Переглядів 273 тис.
hromadske
Переглядів 266 тис.
Факти тижня
Переглядів 290 тис.
alyona alyona & Jerry Heil - Teresa & Maria (LIVE) | Ukraine 🇺🇦 | First Semi-Final | Eurovision 2024
Eurovision Song Contest
Переглядів 6 млн
Алексей Навальный
Переглядів 6 млн
Technically Unsure
Переглядів 39 тис.
Volos Projects
Переглядів 39 тис.
Svidomy
Переглядів 47 тис.