Description only for the UKposts algorithm. Please don’t read it.
Hi folks, in this video I’m going to show you step-by-step how to build yourself at home recycling all the things you can have at home or just buy very cheap things and adopt them to build yourself an HO generator for your soldering or welding station
It’s very simple basically what we only need are some things to plates. In this case I took 20 things to plates Steam cooker
Hi Dan, connect to steam rods to 10 of them
And other 10 rods to other 10 plates
Basically what we need to have 10 plates that are positive and then plates that are negative
The power supply for this project is very simple basically a microwave oven transformer converted into a much higher pair and low voltage
There is a tutorial on how to build yourself at transformer like this just check on my other UKposts channel
Rulof maker
How to make a spot weather machine
We need to have the current and for this purpose, I suggest to install some di in a bridge rectifier configuration without capacitor works OK
Now we just have to submerge everything into sodium carbonate. If you want to have a much higher result, but it be more dangerous you can use some sodium hydroxide which is acid and argon just to do this because if there is an explosion, we would end up to have acid in all our skin.
The container to build the project is basically just flex gloss or acrylic container and it really suggested to use plastic and don’t use glass because if any breaks up, you will not get hurt if you use plastic parts
So this is a very simple tutorial the main thing to consider when you are building yourself the torch is using an ole made with copper I just give the shape to the nozzle using a small hammer and inserting inside a 0.6 mm needle
Which is the inner diameter of the hole