When restoring the old rusty saw, I had to make the wooden handle new, because there was nothing left of the old one. Also, when restoring the antique saw, I removed rust from parts by sandblasting, nickel plated individual parts, made a new handle from oak, used lacquer spray and much more. Please also note that this video is not only to quickly show someone how something works, but also to relax and escape from everyday life!
------------------------------------------------------------
▶ What did I do ?! ◀
The rusty saw was still in acceptable condition, so restoration here would not be much of a problem. After unscrewing the saw blade, I milled off the bolts with the multifunction tool and knocked them out with a pin punch. I recut the threads on the bolts and nuts. Using files and sandpaper, I finished the surfaces and then polished them to make them shine nicely again. I nickel plated these parts to prevent them from rusting. I remade the wooden handle from oak, using the bandsaw, belt sander, and various other tools. After gluing the wood pieces together, I fitted them to the old hacksaw. I derusted the hacksaw itself by sandblasting and then treated it with spray paint. Now it was just a matter of gluing the wooden handle to the saw, mounting the saw blade and putting everything together.
------------------------------------------------------------
▶ Good to know ◀
I used the following tools: Rust remover, screwdriver, pliers, multifunctional tool, tweezers, pin punch, hammer, tap, lathe, file, sandpaper, wire brush, countersink, polishing paste, polishing bench, nickel electrolyte, laboratory power supply, nickel, pencil, ruler, band saw, belt sander, cordless screwdriver, drill, wood glue, glue, spatula, clamp, saw, corundum, sandblasting cabin, cold bluing, spray paint, adhesive tape, cotton swabs, isopropanol, linseed oil varnish, center punch
------------------------------------------------------------
▶ Special thanks to my channel members! ◀
-
------------------------------------------------------------
▶ Do you want to support me? ◀
Do you want to become a channel member? Then you can do it here:
/ @forgottenshinerestora...
You like what you saw and you want to help the channel to develop? If you want to support me, you can donate via Paypal:
www.paypal.com/donate?hosted_...
------------------------------------------------------------
▶ Did you like it? ◀
Did you like the video?
Then like, subscribe and share it, please!
Thanks a lot!