Loved the on board footage with the body off, so educational for me to see the car dynamics. Thanks again 😊.

Love this RWD RC Drift Rescue Series!!! I'm just getting into RC Drifting and this is really helping me learn more about the different components of RWD RC Drift cars! More of this content please!!!

I’m going to send this to people when they talk about having trouble with their setup. I really like how you took it and broke it down section by section. You make me want to undust my MST and play with alignment to see if I can get it to work like I want. Thanks for yet another awesome and instructional video

The timing of this video is mind blowing. I was literally messing with my MST yesterday and felt completely lost. Frustrated and irritated that I just couldn't figure out my settings. I actually had planned on messaging you for some assistance like I had before with the Gyro, and BAM!!!! you post this video. So sweet!!

This video made me realize I need a better local drift track. That track was awesome.

More of this please! Excellent. Never knew how to adjust any of those things properly to get good results. Thanks Troy. The best RC content out there.

Thank you for posting. You’re one of the people that pushed me into buying my first drift car. I purchased the Yokomo YD-2Z about a month ago and it’s fun but I feel it’s missing something. Unfortunately there’s hardly any videos or online material to read on how to set up a drift car and what to look and feel for.

It’s always an adventure when you get a second hand car. I would rather build a whole new car than buy one second hand in most cases since I’m most likely going to completely go through the car anyway. But with that said I Love my MST RMX 2.0 RTR. Smooth as butter right out of the box and was easy to drift. The changeable motor position is a great thing and along with about 4 turns of tightening on the rear shocks to add a little preload gave the car a great balance and speed to the drifts. The stock ESC Plugs also plug right up to the 3300 KV motor that comes with most Team Associated RTRs and that motor with stock spur and 23 pinion jams on these !

Awesome! Love the rescue, keep doing what your doing

Very interesting and simple video thank you! The 'new' wear marks on the tyres that match tell alot after the alignment and upgrades. Even as a complete beginner this is easy to follow and not overwhelming. Great trouble shooting!

Thanks for sharing your thoughts great information on the video. ✌

great video and fixes,awesome rc

It definitely takes a lot of seat time and tuning to enjoy the drifting side of RC. I love my RMX and YD-2.

I Basically have that exact set up. Running a DX 5 Rugged a SR515 receiver and stock every thing else. I was nervous to mess with anything, in fear I'd screw it up. Thanks for showing us beginners what to do. Perfect tutorial.

Every time I watch your videos, it tells me I don't need all out high end stuff, very reasonable price products you got on that chassis.

Awesome video excellent job very nice fix definitely a big difference very nice drifting

Thank you for this video! Really helped me out

Very cool of you to do that for your friend👍🏻🍻

Your videos are amazing man.. keep up the great work... I've learned plenty from your vids great quality stuff 👍

Really good video, makes things simple for those starting out, I wish this video was about when I first started lol I had 4 months of setting up and test driving before it would even hold a drift 🤦🏻‍♂️🤦🏻‍♂️ glad I stuck at it tho best hobby about in my opinion

I really liked this video learned a lot from it

some investigating here then mate finding problems *fully viewed👍Au👍gave you a huge like*

Just hooked my Gyro's red JS plug into Aux#1. DUDE!!!! Totally New Car. I never knew it would make that big of a difference. This by far is one of (they are all fantastic) the best Vi

Those shocks are a great value. I put them on my FXX and it's a game changer compared to the stock MST shocks

If the diff is locked, that's a rmx rtr! A really like your videos man! Having some hard time to tune my rtr but i still don't have a ball diff like the kit version.. much harder to control without spin out and slower than my yd2 or d5 buddies 🤷‍♂️ however the rmx S with the ball diff looks really smooth

Roadside RC rocks and saves the Buddhas ride

I’m new to drifting, bought a used mst rmx a couple of days ago. Is the top mounting position of the motor to prefer rather than the low cg position? What are the pros and cons? Btw, so glad I found this channel, learned a ton out of it. Great job man!

Thank's Again Troy 💯 Scrolling through you're vids and gaining info on the RMX Drifters and set-ups... What gauge do you use for Camber? 👍😎👍 AOAH 🙏 Stay Safe and Play Healthy My Friend 💯🏁🏁🏁🏁🏁

Such a good setup video Troy! It really helps! I can't believe I didn't find it sooner though. Is it in your drift playlist? Did I just miss it?

Hey Troy, I’m looking to get an mst rmx rtr and I was wondering if i should get various sets of tires as I’m not sure if the ones that come with the rtr are suitable for the surface I’m going to be using it on. (Most likely tiles and asphalt/concrete) Also, are there any specific body mounts you would recommend as I’m not keen on drilling holes in to the body? Thx in advance :)

What’s a good cheap Amazon servo upgrade for the stock mst rmx 2.0s?

Hi, great vid. What's the RMX 2.0 like out of the box ? Cheers.

I bought the GYD 450 based on one of your videos. Best gyro I have ever used!! I LOVE iT!! But, why the GYD 450 and not the GYD 550? Do you plan on doing any videos on the 550?

🤩

If you have a radio with gyro input in the receiver, can you eliminate the stock gyro...and what weight fluid did you put in the shocks ?

Question... Other than adding a Gyro I haven't messed with any settings on my MST. I'm still getting use to drifting. Any suggestions on controller/Gyro settings to set my car up? I've noticed I do a lot of spin outs. Maybe the reaction time or return time on steering isn't set right?

Hello - Any advise on getting more steering throw - I just upgraded my RMX2.0s to Futaba 4PM radio -GYD450 and a PDI4409mg digital servo. It’s butter smooth. My issue is I can’t get full lock. I am new to this and don’t know howto add throw in the controller. It’s maxed to 120% but only get to about 80. Thanks in advance

Hey is the xr10 just stock combo worth it or should I just get the esc for a 9t surpass hobby motor

Is gyd450 gyro exclusive for drifting or does it work for general on road racing too?

I have no idea why the yokomo fried a servo. I myself never had one of those and only ran the V4 yokomo gyro and love them a lot. Took a couple minutes to understand it though

When you say the length of the rear turnbuckles is 44mm, where are you measuring from? From the far outside edge of the whole turnbuckle? The inside edge of the inner circle of the turnbuckle ends? The center of the turnbuckle?

Hi Troy, I have a mst rmx 2.0. It’s equipped with castle creation mamba max motor and esc with power hd G1 gyro. My car drifts very well and looks good around corners but has a lot of steering wobble. how can I correct that? I have an airtronics MX-3 FHSS radio with receiver that came with it. I appreciate your feedback.

Is the random plug from the esc or servo?

Hey Troy, would you suggest any gyro beside the 450 470 or 550? Id like to help out new guys to the hobbies and they dont want to put as much $ as me with my 470 Anything else tou think is good value for a beginner? Thanks for your love to the hobby

What's your thoughts on the yeah racing gyro?

Can not find that group you speak so highly of anywhere is there another version besides the 450 that’s good? Thanks

Thats the whole fun of drifting rear wheel drive its not easy

I disconnected stock fxx esc reconnected it and it wont respond. How do i get it working? Light is blinking red

The MST rmx 2.0 had non-adjustable turnbuckles the MST rmx 2.0 S has adjustable turnbuckles and was sold in a ready to run

What causes the wobble or twitching when in a drift?

Do you Have a Partnumber of the shocks? the amazon link doesn't work for me, it shows a bunch of shocks but none are Yeah racing.

I just built my yd2z and my wheels get stuck on my shocks at full lock is that an alignment issue?

My issue was trying to go cheap and picked up some Traxxas electronics for my son's RMX and it sucks lol

5:18 they look like weld overdose shocks

I didn't get turnbuckles with my mst rmx 2.0s kit

Hey! Are you still actively replying to comments??? Would love to get ahold of you if you would be so kind to help me with some troubleshooting issues I’m having. I loved my drift car! I have always been obsessed with drifting. Whether it was movies, video games, in my own car, etc, if it was about drifting, I was ALL IN! I always loved seeing videos of RC drifting and INSTANTLY fell in love with the hobby. Like everything else I’m super interested in, I dove head first into researching everything I could about the hobby. Sadly I wasn’t prepared to see the amount of money I would need to spend to even get a slightly legit setup. I couldn’t afford a luxury like that at all growing up and was even harder to save the money as an adult. I finally was able to save up enough money at 26 years old 😂🤦‍♂️that I could actually use on something expensive that was SOLELY a gift to myself. I bought the ENTIRE setup for my rc drift car all at once. It cost me like 6-800$ and that’s not including all the rims and accessories I bought for it. I was in love. It was the closest thing to professional drifting I could experience with a sick car lol. I definitely couldn’t afford an ACTUAL Honda NSX. Anyway, I bought it from my local hobby store which also has an rc drift track which customers can use freely during store hours for 10$ a day. From the very first day I purchased my car, I was at the store open to close drifting on their track. I spent tons of money and became close to the stores employees, made new friends, and was fully invested and in love with this hobby. Because of my knowledge and experience with drifting concepts, and knowing the physics and all that jazz, I had the hang of it and was drifting like a semi pro within 5 mins. Within the same 2 weeks I bought it, and was at the store every day and never used it outside of the store, my car was acting weird and not really responsive to my controller. Mid run, it just stopped in it’s tracks and eventually wasn’t responding at all except the wheels would turn 1/20 times for a split second when I would mess with the controller. When I got my employee friend/ rc drift Sensei to look at it, the motor/ main components with the fan started smoking. At this point the car was completely unresponsive to remote. The guys at the store tried to help me, and told their boss the issue and even reminded him of how I just got it less than 2 weeks ago and how much I support the store. I was told by the store owner that they were going to try and contact supplier to see about a replacement kit or at least about a replacement part since it definitely wasn’t because of wear or age etc. i returned every day for the next week asking about it and the owner just shut me down every time. Clearly didn’t want to help me. It really turned me off to the hobby and really hurt spending all that money and supporting his store just to be told to screw off basically when my brand new car malfunctioned for reasons completely out of my control. That was over 3 years ago and I really really miss the hobby and drifting my car and customizing it and using the track with friends. Please help me with my problem so I can love this hobby again and put this beautiful, awesome, rc drift machine to good use!!!! What do you think the problem is?? Car stopped mid session. Battery full in car and controller. No response from controller no matter how many times we tried resetting the car or changing batteries etc. guys at store tried everything. Smoke comes from main component in center of of car with the fan and 3 wires coming from it. Wasn’t being driven, just turned on at the counter and not responding as usual but this time it started smoking. Still gets power to car, doesn’t respond. Doesn’t turn wheels anymore when turned on. I would REALLY APPRECIATE any advice or help that you may have. If we can email or something so I can show you the problem with a video or pics, I would gladly pay you for your time and diagnosis! Cheers. Thanks for reading! Hope to hear from you

A lot of people quit rc due to tuning

Gyros and analoge servos doesnt allways play nice. I usally have digital servos with gyro in airplanes, avoids oscillation and burnt servos.

I can't calibrate this stupid esc, its crap! the mst rtr esc won't calibrate, help please!

thats definitely not a mst servo . they have all black wires and dont sound like garbage

What is the wheelbase of these rigs? and Track Width? Thoughts on converting a 2wd custome built drag slash into a 2wd drift machine?