Sleeper Go Kart gets Tracks and Skis!

  Переглядів 643,525

Grind Hard Plumbing Co

Grind Hard Plumbing Co

Місяць тому

It's time to revolutionize. Charging with Anker SOLIX F3800 Home Power system.
Use promo code MARCHF3800HPP to get 22% off for single units or bundles. Begin your Powerful journey at ankerfast.club/e6BO1P !
This is our sleeper go kart! A regular racing shifter cart that we removed the engine and installed a 28,000 kW set up from Electro & Co electroandcompany.com
This sleeper go kart is incredibly fast and incredibly silent let’s hope these tracks and skis finally give it enough traction to use its full power!
These are the different items we used powered by the Anker SOLIXF3800 refrigerator 1200 W, microwave 1500 W, Everlast welder, our homemade elevator 2000 W, shop lights 1500 W.
Get our Grind Hard here! www.grindhardplumbingco.com/
contact@grindhardplumbingco.com
PO BOX 2370
Sandpoint ID
83864
#AnkerSOLIX #LIVEINPOWER #AnkerSOLIXF3800

КОМЕНТАРІ: 942
@GrindHardPlumbingCo
@GrindHardPlumbingCo Місяць тому
Join Anker SOLIX F3800 Facebook Group! Share your journey, discover tips, and more! 🌐 facebook.com/groups/ankersolixf3800/
@Grimm-Gaming
@Grimm-Gaming Місяць тому
I love anker stuff! Best banks on the market imho. But even with a massive discount a 1500$ bank is a bit outta my price range haha. I do bring the 30,000ma one camping though always
@Doggo_Bork
@Doggo_Bork Місяць тому
Those battery banks are pretty awesome. Haven't had much faith in Anker since the Eufy drama but i can appreciate a good battery
@Grimm-Gaming
@Grimm-Gaming Місяць тому
@@Doggo_Bork whats eufy?
@wishicould473
@wishicould473 Місяць тому
Put that kit on a colman minibike
@Doggo_Bork
@Doggo_Bork Місяць тому
@Grimm-Gaming a home security camera setup made by Anker. On release it was supposed to be end to end encrypted yet random people were able to connect to them via VLC with minimal effort. It has been patched but it was nuts
@cdclpc
@cdclpc Місяць тому
Dammit Will! Tuck those hoodie strings in while using the lathe.
@FloridaMan0561
@FloridaMan0561 Місяць тому
Yes. I know that I’m not the only person who was cringing as I was watching him using the lathe with those strings hanging down. It only takes that one time for it to accidentally get caught up in the lathe to cause an extremely bad injury or his death! I know that Ethan and the other guys have had to tell him to be careful more than once!
@Grimm3151
@Grimm3151 Місяць тому
ive seen firsthand what happens to dangly clothing and the person wearing them around a lathe its pretty nasty on the low end and mind scarring on the high end
@ericd7532
@ericd7532 Місяць тому
My welding teacher would have cut them off
@Shootit-hx2ot
@Shootit-hx2ot Місяць тому
@@ericd7532 sounds like a good teacher
@koenthiessen-qz1ez
@koenthiessen-qz1ez Місяць тому
better yet, dont wear a hoodie with strings anywhere near a workshop
@brandonbaldwin6845
@brandonbaldwin6845 Місяць тому
I love that Ethan knew exactly where to send Will to find a short chunk of solid stock buried in the snow! The man has a lot of stuff and knows where it all is!
@MukLander
@MukLander Місяць тому
I feel like he is on the spectrum with add and adhd people. My garage is a mess and looks like a landfill to my family. But I guarantee I cal tell you that the screw for the lawnmower in the back yard that holds on the plastic cover is under the left rear tire of my jaguar and has been there for 6 months now. Or how I have sandpaper that fell behind the work bench a year ago that’s 1000 grit. Or he’ll even where I dropped a 10 mm socket by my back fence and it’s still sitting there after 2 years. We never forget anything. Especially if it’s something we handled last. I cannot tell you where anything is tho after my mom comes by and “cleans” up the house while she visits. Lmao I have lost more stuff to her moving something 6 inches than to my kids that touch everything. Atleast my kids have only 4 hiding spots and I can guarantee you will find anything you lost in those places. Yea it makes no sense to others that are normal. But that’s the beauty of having adhd. Everything looks like a tornado came through but we know where it all is at. (Not saying everything in the house is a mess. Just the zones that I personally claim as only mine.) everything else is clean and looks like a hotel room. 😂
@fkutube933
@fkutube933 19 днів тому
Are you gay?
@HarryFromTheNorthSide
@HarryFromTheNorthSide 7 годин тому
I swear i have the same situation.soon as mom comes and does her little cleannup its like we’re lost in a familiar place and cant find shit we’re looking for
@philipreaves
@philipreaves Місяць тому
Gotta love Will sitting 18 inches from the lathe with no PPE on. They don’t call him One Eyed Willy for nothing…
@HANKthebastrd
@HANKthebastrd Місяць тому
It's the loose hoodie strings hanging around spinny things that get me nervous
@davidanalyst671
@davidanalyst671 Місяць тому
safety karen
@WowCreativeUsername
@WowCreativeUsername Місяць тому
@@davidanalyst671boomer crybaby
@madmax82988
@madmax82988 Місяць тому
Nobody calls him that
@tylerbeekman3239
@tylerbeekman3239 29 днів тому
​@davidanalyst671 you disagree that he should be more safe around the lathe? At least have safety glasses on and tuck the strings away🤷‍♂️😄
@dj858
@dj858 Місяць тому
that hands down was the smoothest transition into a sponsor ever, so smooth i almost didn't realise i was been served an advert until the end
@DeckoTD
@DeckoTD Місяць тому
fool
@kuebby
@kuebby 29 днів тому
It was so cool I was willing to watch the ad because it's a good use of how I'd actually use a product.
@Unorthodox_kidd
@Unorthodox_kidd 29 днів тому
I still didn’t realize that it was a sponsored ad till it was over
@stoichiometry147
@stoichiometry147 29 днів тому
Yep
@dj858
@dj858 29 днів тому
I see i was not alone on this, I guess im not the only fool lol and it seem my reply to @DeckoTD has not been posted lol
@skyfreakwi
@skyfreakwi 29 днів тому
Hey machinist Willey! Next time you only have to take off a little bit just run it again without turning any dials. It's called a spring pass. It just takes off the amount that the cutter flexes away from the part. You'll be surprised how often you can go too far without going anywhere!
@ViiKing_
@ViiKing_ Місяць тому
When you find the video within 2 minutes of the upload, it's like I can smell the burnt whatever they're burning this time from the video
@doggonedk
@doggonedk Місяць тому
Will hasn't grasp the concept of you go in halves on a lathe. But you guys are hysterical as a group to watch. Great video as usual!
@eric62backstrom
@eric62backstrom Місяць тому
this is the comment i was looking for.
@haydenpoch6549
@haydenpoch6549 Місяць тому
Also, don't take hot measurements especially for a press fit
@charleshazen5779
@charleshazen5779 Місяць тому
longest anker ad of all time
@p1ngerss
@p1ngerss 19 днів тому
sponsorblock my beloved
@wesst1765
@wesst1765 Місяць тому
When going through my machinist class. The math behind it is that when cutting circular stock on a lathe it is actually double the depth of your cut. So cut half of what you want until you get comfortable enough to take the big cuts
@WorldofTon
@WorldofTon 2 дні тому
Yes because you are decreasing the radius by the amount you move. So it takes that much off of each point all the way around the circumference.
@WorldofTon
@WorldofTon 2 дні тому
1/2” cut on the radius is a full 1” off the diameter.
@matthewgoodwin3939
@matthewgoodwin3939 Місяць тому
As an Aussie, it was refreshing to hear Will ask for a 19mm spanner when the track came off the first time
@APOLLO-il5rh
@APOLLO-il5rh Місяць тому
U guys needa make premium ratchet straps😂
@TheSamcorrigan
@TheSamcorrigan Місяць тому
Try and put 45 degree chamfers on both sides of all the teeth of the tracks to give it a leading edge when sliding sideways, this might help with how much the come off when going round a corner
@amcustomfab
@amcustomfab Місяць тому
I'm very disappointed that Ethan's beanies were not used in the cushioning of that battery 😎
@FloridaMan0561
@FloridaMan0561 Місяць тому
Right? Lol, I bet that they are still in there on the little red truck build! 🤣🤣🤣
@eric62backstrom
@eric62backstrom Місяць тому
im pretty sure they used them all XD
@BigDipper907
@BigDipper907 Місяць тому
Will lookin like Freddy Mercury w his mustache 😂
@pastaalalamborghini
@pastaalalamborghini Місяць тому
Ha! Truth
@chrislancaster6986
@chrislancaster6986 Місяць тому
100%. But remember, Will might have to google who that is. And then put his phone in his back pocket
@CLCIII
@CLCIII Місяць тому
Less sketchy than many of Grind Hards builds! As Always, May God Bless you and yours! 😇
@spankbank8506
@spankbank8506 29 днів тому
That 6 minute generator ad must've paid pretty good
@jamesbizs
@jamesbizs 27 днів тому
7+ minutes actually. And the only thing it cost them was their dignity.
@goontheracoon
@goontheracoon Місяць тому
Make an electric crosskart "trike" with a battery pack in the back (over track), but have it on a swing arm, so that it works like a servo, making it so you don't have to tilt/ lean while turning, and able to control it while doing a wheelie! This proof of concept can start a new wave of snow machines, since electric snowmobiles as is sucks hard and is anything but premium.
@russellzauner
@russellzauner Місяць тому
or just put the motor and tracks on the barbie boat to make it amphibious all weather
@Todd_Gerhardt
@Todd_Gerhardt Місяць тому
Sorry but I'm confused why would u have to lean/tilt in a cross cart to turn? They have 4 wheels? We'll tracks if I'm reading this right lol
@williamschultz298
@williamschultz298 Місяць тому
@@Todd_Gerhardt Not OP but probably to counterlean during a turn. With long suspension vehicles (without an anti-rollbar) during turns, they have a tendency to lean outwards. this would solve that without using an anti-rollbar (which you want for some reason????).
@goontheracoon
@goontheracoon Місяць тому
@@Todd_Gerhardt Let me clear things up.. it's a snowmobile, but picture a crosskart trike, the battery can lean from side to side as to shifts the center of mass, it also offset driver weight up front 2, using the battery weight as a feature, and not a flaw like EVERY electric machine ever. it would be MUCH safer during avalanches, and you'd be able to climb RLY well in it. for those who play in snow, this will save lives.
@Exstaz
@Exstaz Місяць тому
Will is getting really good at “crafting”. It is nice to see how he developes as a builder. He got a really good teacher!
@cbr600fu2
@cbr600fu2 Місяць тому
i hope those guys paid you allllll the money for that ad. You did such an amazing job i forgot I was watching an ad.
@chunkychambers1530
@chunkychambers1530 Місяць тому
Remember there machinist Willy if you take a little bit off on a lathe it takes it off x2!! So that little bit is doubled haha
@bldfr5
@bldfr5 Місяць тому
Anker makes some really good bluetooth speakers too. Their whole soundcore series is pretty nice.
@ethantreece8245
@ethantreece8245 Місяць тому
NGL GHPC, could throw solar panels on the roof of the shop and have a battery backup system (and I think Anker makes those) which would help the power problems (when they occur)
@pastaalalamborghini
@pastaalalamborghini Місяць тому
Anyone who owns a home that can afford solar panels and home battery back up should get that installed ASAP. My power cost has gone up over %20 in under a year. If cost continues to rise, the ROI graph will be a curve, not a straight line
@jaybomb5022
@jaybomb5022 26 днів тому
This was the longest Ad I've ever seen in my life.😂😂😂😂
@brockryan3405
@brockryan3405 Місяць тому
23:10 Was pretty much anyone's throttle and speed dream. I felt every push of the accelerator and every turn of the wheel.
@42green
@42green Місяць тому
Unexpected but appreciated non Friday upload ❤
@Whateverpoopiepants
@Whateverpoopiepants Місяць тому
If you turn a part down like that and it’s too loose but not a safety issue you can knurl the surface. If it goes inside deep like that part it’s probably be fine. Cheers dudes.
@warthogA10
@warthogA10 28 днів тому
I've known a few machinists in my days, and they all have a patience level far beyond most people 😂 And this is exactly where it comes from, just sitting and watching
@Glitchwolf-iy9wv
@Glitchwolf-iy9wv 29 днів тому
Hey GH! I just wanted to thank you guys for making such great content, you all are a HUGE inspiration for me, and my channel. Keep it premium!
@chrisgage1051
@chrisgage1051 Місяць тому
I can't wait to see the MonsterCycle drive under its own power
@ipoopmuffins
@ipoopmuffins Місяць тому
your electrical setup in the shop with that anker bank is so sick. i wonder how long it would last with you guys just doing normal shop things for an episode.
@youtubeisfullofspam7068
@youtubeisfullofspam7068 28 днів тому
Probably an hour or 3 if using lower voltage items. It's basically a boat anchor
@jamesbizs
@jamesbizs 27 днів тому
Not as long as even a single generator…. The battery backup is stupid for their application. A shop, in the middle of nowhere, doesn’t need this. A simple generator or even 6 will do the trick, for less money.
@250JefeMane
@250JefeMane Місяць тому
Quick tip. If you need to find something in the snow you can use a flamethrower to clear the snow
@K.J.Ray421
@K.J.Ray421 2 дні тому
I see that gives you 6,000-W and an amp rating of 30 amps. If you use the lathe, air compressor, or welder, all separately and not at once, then you should be fine. But you'd benefit from the double setup they have, giving you 12,000-W, or the battery expansions like you said. We thought we were ok here, and didn't need a backup generator. Then the power went out for 31 hours a few weeks ago. The next day we ordered a 22-KW Generac Guardian generator with the automatic transfer panel. It runs off of natural gas or propane. The entire generator with the transfer panel, shipped to the door was about $6500. And then another $700 in parts for the conduit and wire. We wired it ourselves, and it's big enough to run our entire place (including 2 HVAC systems and a boiler) and were able to hook up our neighbor's house also, since they don't have AC, there's not much of an amp draw there. In any power outage though, we just don't run the electric dryer, and likely could go a couple days just hanging laundry.
@brosky117
@brosky117 Місяць тому
Surprise midweek upload! Thanks boys!
@Jonathan_Hines
@Jonathan_Hines Місяць тому
Finish the chopper build!!!
@davidanalyst671
@davidanalyst671 Місяць тому
hes working on it. lolz. not everything on youtube is done in one week and then you get a vid.
@jamesbizs
@jamesbizs 27 днів тому
Why? Then they can’t milk the videos for a few more months lol. Not that I complaining. But still
@simplyjeep5495
@simplyjeep5495 Місяць тому
I love working with old machines. Had a 1970s good way lathe at the last shop I worked for. Amazing tool. Could take some massive cuts. For example it could take a .650 thow interrupted cut comfortably. Or it could turn some perfect sealing surfaces. Also I agree with never using calipers on fits. Gotta mic it! Or test fit! 🤣 you guys are amazing!
@bondvagabond42
@bondvagabond42 5 днів тому
It fits my definition of a proper deathcart: just causes manic cackling the entire time you are ripping on it.
@c0c0asauce
@c0c0asauce Місяць тому
Use a small drill bit to make pilot holes before using the step bit. It will save time and make the step bit last longer. Do NOT blow chips off a part without safety glasses or at least close your eyes first.
@valiant7357
@valiant7357 Місяць тому
What happened to Ethan? He's hardly ever on the channel anymore. Nothing against these guys, but Ethan is what brought me to this channel and we get stuck with these dudes.
@GrindHardPlumbingCo
@GrindHardPlumbingCo Місяць тому
he's been hard at work with the chopper! Video about that coming this Friday, stay tuned!
@user-us5it8bq9w
@user-us5it8bq9w 13 днів тому
That definitely looks like a blast. once you guys get all the R and D done on those tracks. it should be even more of a blast. and Edwin and Will speak the same language when it comes to this kart.
@Benzy670
@Benzy670 Місяць тому
"When it works, it rips" is basically the motto for everything Will makes, I love it haha
@PurplePikachizard
@PurplePikachizard Місяць тому
That motor is wayyyy too powerful for the tracks! 😂
@davidanalyst671
@davidanalyst671 Місяць тому
its either the motor was too powerful or the tracks were just designed to go much much slower. They probably designed them to go on some kids toy at like 1/10th the RPM
@PurplePikachizard
@PurplePikachizard Місяць тому
@@davidanalyst671 Agreed. 👍
@Bdub1952
@Bdub1952 Місяць тому
Who wants to bet that Ethan's neighbors appreciate the E-rippers more than the IC rippers.
@jakezanders6598
@jakezanders6598 Місяць тому
Pretty sure his nearest neighbor is a few miles up the road
@Bdub1952
@Bdub1952 Місяць тому
@@jakezanders6598 pretty sure I've heard Ethan comment regarding his neighbors and the noise in the past.
@jamesbizs
@jamesbizs 27 днів тому
Lol what neighbors.
@jamesbizs
@jamesbizs 27 днів тому
@@jakezanders6598I live miles away from a decent road, and it still gets pretty damn loud. So 🤷🏻‍♂️. But yeah, I’d be surprised that he has neighbors close enough to complain
@chrisnoyes9397
@chrisnoyes9397 29 днів тому
Love hearing the giggling when your driving it!!
@bondvagabond42
@bondvagabond42 5 днів тому
Premium tip: a pitchfork and a metal tined rake work great when you need to find something non-inflatable, that's buried in the snow, when you are too excited to wait for spring.
@ryanryan3473
@ryanryan3473 Місяць тому
I can imagine exactly how the GHPC meeting went when you guys decided that you could market yourselves. Someone came up with the concept of a catchphrase and then someone else said “How about PREMIUM”? Everyone agreed, and then you decided to say it CONTINUOUSLY followed by “merch” branding saying the same thing on shirts, hats, cups…I guess I just miss what this channel used to be.
@travisjackson4837
@travisjackson4837 29 днів тому
Bud how do you think they can afford to buy stuff and take enough time to build the shit without having a day job…. They had to make it profitable to make this much content this often… they are way less in your face about the merch drops then a lot of other UKpostsrs … tldr quit bitching.
@gingervitis93
@gingervitis93 Місяць тому
My "off road" mobility scooter sucks. Can you make me one that actually has some real power so I can go on trails?
@fredgerstner2742
@fredgerstner2742 29 днів тому
Currently off grid living and I really need to get one of those. That would be really helpful and pretty awesome.
@NateD77
@NateD77 Місяць тому
It still blows my mind every time I see you guys doing CAD with a track pad. As a professional CAD user I can't imagine how painful that would be to do.😂
@oht_zz
@oht_zz Місяць тому
YEAAAH MORE VIDS ABOUT THE GO KART
@danielreid3469
@danielreid3469 Місяць тому
When you guys post it makes the day just a little better every time, also motivates me to work on my projects!
@TwinShards
@TwinShards 29 днів тому
You guys should integrate both the wheels and the skis together for the ultimate offroad go-kart! The skis just need to be like 1cm higher than the tire so they'll "float" when the ground is solid :D
@HulluJanne
@HulluJanne Місяць тому
This comment is for hoping for a new lathe to appear.
@DinosaurEatsRoss
@DinosaurEatsRoss 29 днів тому
You leave that atlas lathe alone lol I’ve got the same one
@HulluJanne
@HulluJanne 29 днів тому
@@DinosaurEatsRoss It would be cool to see a bunch of remanufacturing/resurfacing and other stuff done to it to get it back to making some fine exact results. But I wouldn't be holding my breath as I haven't stumbled upon such footage in UKposts yet... I think it has a "one man machine" title atm. Meaning only one man knows it's quirks and has mastered it.
@Y3il
@Y3il Місяць тому
the 7 minute sponsor segment was unnecessary
@ryancottingham925
@ryancottingham925 5 днів тому
Google UKposts ReVanced thank me later
@thezfunk
@thezfunk 14 годин тому
​@@ryancottingham925There are browser plugins for desktop too.
@fatgalaxie
@fatgalaxie 29 днів тому
yall incorporated an add into this video and it was done flawlessly. i was interested enough where i was gonna ask a question about the anker charging, but you answered it as i was typing. as always solid entertainment, informative and interest piquing. good ass youtube channel
@jessegilson6345
@jessegilson6345 28 днів тому
They are required to clearly state that it's an ad and they didn't so I don't think it was flawless...
@konradwalach2451
@konradwalach2451 Місяць тому
here's the record for the fastest tracked vehicle: The world record for the fastest tracked vehicle is held by a modified M113 Armored Personnel Carrier (APC). In July or August of 1979, this tracked vehicle achieved a remarkable speed of 121.9 kilometers per hour (75.7 miles per hour). Imagine a heavily armored APC zipping along at that pace-it’s quite impressive!The world record for the fastest tracked vehicle is held by a modified M113 Armored Personnel Carrier (APC). In July or August of 1979, this tracked vehicle achieved a remarkable speed of 121.9 kilometers per hour (75.7 miles per hour). Imagine a heavily armored APC zipping along at that pace. I believe in you Will
@TheNapalm22
@TheNapalm22 Місяць тому
"heavily armored" hahahaha
@JustinMcnamara-yz3zw
@JustinMcnamara-yz3zw Місяць тому
For every like l will do nothing.
@gx2akosu_725
@gx2akosu_725 Місяць тому
And I'll double that
@Dansanan
@Dansanan Місяць тому
I'll triple
@fasehuh11
@fasehuh11 Місяць тому
Weak
@jamesbizs
@jamesbizs 27 днів тому
I know something I’d prefer you to do. But it wouldn’t be nothing. Or for now, just stop being such an attention seeking loser and go away
@nealp.2841
@nealp.2841 25 днів тому
Like evening else in your life.....
@MrKubahades
@MrKubahades Місяць тому
7 views in 30s, they fell off
@APOLLO-il5rh
@APOLLO-il5rh Місяць тому
Fr
@carsonnichols2163
@carsonnichols2163 Місяць тому
2k in 6 min
@Basilisk_in_a_dark_room
@Basilisk_in_a_dark_room Місяць тому
4 k in 11 min
@landonchristie1548
@landonchristie1548 Місяць тому
5k in 14 min
@frapeyyy610
@frapeyyy610 Місяць тому
6.5k 17 mins let it go mate your the irrelevant one🤣
@DeadReckon
@DeadReckon Місяць тому
Hopefully this goes better than when the Cybertruck gets a lil wet. This is gonna be sketchy, keep up the great work guys.
@CountryClimbing
@CountryClimbing Місяць тому
That seems SOOOOO fun!!!!
@AidenRisk
@AidenRisk Місяць тому
You guys are insane… and I love it
@ericbogenschuetz3500
@ericbogenschuetz3500 28 днів тому
a 'kurmudgen' , new unit of measure for everyone . Love it. 😁
@SNAKERADIOS
@SNAKERADIOS Місяць тому
Oh yea it is so nice to have an alt power source. We have a 24 k Generac on natural gas so when the power goes out our place is like 1 of 2 in our big neighborhood that has the juice. Its great peace of mind. Love your builds guys big fan here. Tim
@skippybuilt
@skippybuilt Місяць тому
I love that adult size ev power-sports devices just sound like Really big RC cars
@EriMCardenasRC
@EriMCardenasRC Місяць тому
I just commented almost the same as a RC guy this is just a Blast
@matthewschopf1253
@matthewschopf1253 Місяць тому
Please also Will no baggy sleeves/ hoodie strings near lathe! Love the creations!
@vooduuchild3601
@vooduuchild3601 Місяць тому
100% need to build an RC vehicle with those tracks on all four corners!!! Be about 1/5-1/4 scale and would be amazing. You already have the motors, just need heavy duty 1/4 scale servos to steer. Watch some of Kevin Talbot's Raminator videos and he shows great servos for the best deals that could handle that kind of load.
@sullytime3833
@sullytime3833 Місяць тому
Thanks for making me chuckle boys!
@ZOROASTED
@ZOROASTED Місяць тому
This kid Willy is great, his slightly wrong word usage; "curmudgeon", "swindle", cracks me up.
@BeEReDItIoN
@BeEReDItIoN Місяць тому
Your the best that North Idaho has its awesome to see you guys around town
@bashr52
@bashr52 Місяць тому
I'm surprised you can steer that thing with the tracks barely on the ground once it hooks up! 😁
@jaba512
@jaba512 Місяць тому
Be careful! I think you should first plug the orange plug and then the blue connector to the wall. The blue has insulated connectors. If the wall is live (happen to have forgot one fuse on), the orange plug could have dedly live prongs exposed. Cool things you are making
@kevveh
@kevveh Місяць тому
Yess this is what i was waiting for! Didn’t know you guys would actually do it! Amazingly done 🤩
@chassidywhite5979
@chassidywhite5979 Місяць тому
I would die to have the machine keep it up he can show you so much he is so good when it comes to Mechanics and engineering. You all are great at this that’s why I watch this channel!
@ethanbalitz9291
@ethanbalitz9291 Місяць тому
I petition that you guys get a gas tank on the property for all the vehicles that you guys have been building recently! Love the content and keep up the great work guys 💪🏼
@AdamLoerts
@AdamLoerts Місяць тому
you should make the bottom smooth like a sled and make the tracks retractable so you can use it like a downhill sled with tracks that can take you back up the hill.
@CypressENZO39
@CypressENZO39 29 днів тому
Best builds ive ever seen and ive seen alot. Great jobs guys
@Slikx666
@Slikx666 28 днів тому
I just had a thought. One go-cart, 4wd, suspension and tracks. As long as it's not too fast it could make a little racing tracked vehicle. 😁
@19D40D3X
@19D40D3X Місяць тому
You guys have got to make a mini Ripsaw tank.....that would be epic....
@5ALL4D
@5ALL4D Місяць тому
I love that throughout every video of the go cart the stance gets wider
@centralcoaster33
@centralcoaster33 Місяць тому
Super fun! But maybe it's ready to collect dust until next winter snow. That'll give you time to think up solutions to some of the issues.
@mikellrogers1541
@mikellrogers1541 24 дні тому
You should put two tracks on either rear tire and put a outer guide to keep both tracks on actually inner guide and outer guide welded on the outside of either side. And put wheels on the front they will still turn in the snow similar to skis. And I've seen at the drag strips where they put solid rubber on the tracks instead of grooved
@BreakOutOfTheAlgorithm
@BreakOutOfTheAlgorithm Місяць тому
Y'all's content has been killing it lately! The production quality is better than any UKposts channel I can think of. Music is 10, timing and tempo is a 10, freaking everything is off the rails premium! 👁️💯🔥👍🔔
@jamesbizs
@jamesbizs 27 днів тому
Well when you get paid to run a 7+ minute ad in the middle of your content, you have money to spare for production value
@corbensquirrel8245
@corbensquirrel8245 Місяць тому
I can't believe you guys are at 2.3 million subscribers. Love the videos
@stirfrybry1
@stirfrybry1 Місяць тому
I used two 12 inch speed squares (carpenter tool) to attach two ski tips about a foot long to my downhill mt bike to ride the snow. The hypotenuse faces forward and the tail end of ski is exactly where the wheel is designed to hit the ground. If the back of the ski extends back beyond the line drawn through your head tube to the ground it ruins what the geometry of the vehicle was designed for. I lucked into this knowledge, but it's for real. On my Wheelski (Patent search confirms my design is fit for utility patent in 1998 for unique pivot. Acts like knees of the skier) I could shred the slopes You guys need to hear my testimony. LOL Seriously though, I was riding ski slopes on my DH bike at Woodbury Connecticut on weekdays and Plattekill in Roxbury New York on the weekends. I could ride with no hands it was so stable and I could make turns so sharp I could touch the bars to the snow, but Plattekill is super steep at like 40 degrees so maybe that accounts for the crazy turning anyway, love your projects and love watching fun
@chassidywhite5979
@chassidywhite5979 Місяць тому
I love watching Ethan help will learn brings a different dynamic to the channel! Like a mentor! You all make is great to watch! The editing on this would be so hard crazy good!
@JoshuaBaynes
@JoshuaBaynes Місяць тому
Love the new shop you guys have. Big step up from the other one. Keep up the great builds!
@finchadaptivefabrication4689
@finchadaptivefabrication4689 15 днів тому
Noticed all the Everlast equiptment. I love my Everlast Tig machine and for the price I can not find anything better.
@KingToeBean
@KingToeBean Місяць тому
Having a mouse for CAD is honestly life changing. I’m sure you all have mastered the two finger touch though.😉
@freedomtoclick
@freedomtoclick 29 днів тому
i think that was the perfect amount of snow, any deeper and you guys would been getting stuck alot.
@Im-Unconventional
@Im-Unconventional Місяць тому
Came to skip ahead while at work Later ill be back for long form! THANKS FOR THE DROP!
@Thorinox
@Thorinox Місяць тому
Anker has always been a go to brand for me. And thats just crazy how much that thing can run. Imagine charging that from Solar as an off grind machine.
@TurdleShell
@TurdleShell 26 днів тому
honestly this makes me wanna see something quick with full tracks. some weird ripper tank or whatever
@andoniainaandrianasolorako8909
@andoniainaandrianasolorako8909 Місяць тому
i love this channel so much that i'm willing to watch their ads
@jameshatton4405
@jameshatton4405 27 днів тому
I kind of like the videos where Steve and Will do stuff together and get to have fun togethe 👍
@EriMCardenasRC
@EriMCardenasRC Місяць тому
Damn that RC is huge totally Hobby Grade🔥🤣
@aliassmithandjones9453
@aliassmithandjones9453 Місяць тому
on a freshly groomed snowmobile trail that thing would take your fun to a new level
@michaelfowler8289
@michaelfowler8289 Місяць тому
What if you put some kind of shocked like coilover shock on the aluminum plating underneath on the very back of the cart that would give you a little cushion plus it would help pack any snow and give it a ramp😮
@prophez23
@prophez23 Місяць тому
That's high wattage premium swindle if I ever saw it! Lol love it!
@AwareOCE
@AwareOCE 29 днів тому
Dudes!! This looks SO MUCH FUN!! Just re-watched some of the Colonel senders vids and WE NEED MORE POWER WHEELS!!!!
@vintagespeed
@vintagespeed Місяць тому
if u charge it off the wall plug while it's powering the wall plug, perpetual energy. 👍
We Put Two Motors and 56,000 Watts into China's Worst Car!
42:26
Grind Hard Plumbing Co
Переглядів 273 тис.
Testing a Homemade Boatercycle on Gator Infested Lakes!
35:45
Grind Hard Plumbing Co
Переглядів 350 тис.
Гражданская оборона 2024 - 16 полный выпуск
1:04:15
Телеканал ICTV
Переглядів 529 тис.
I Built a Go-Kart for Abandoned Railroads *Again*
21:04
prestongoes
Переглядів 3,2 млн
1930s Gearbox Bike - Restoration
33:58
Forgotten Things
Переглядів 2,6 млн
How This Car Does 0-100 in 0.9 Sec
17:05
Driver61
Переглядів 1,4 млн
You've Never Seen A Wheelchair Like This
16:49
Mark Rober
Переглядів 21 млн
Building the FASTEST SR-71 Blackbird Rocket Plane!
17:53
ProjectAir
Переглядів 175 тис.
World's First SCREW-BIKE
23:04
James Bruton
Переглядів 1,2 млн
Rotary Valves Make Normal Valves Look Silly - Why Aren't We Using Them?
17:14
driving 4 answers
Переглядів 1,4 млн
How to Build a Sleeper Go Kart!
35:30
Grind Hard Plumbing Co
Переглядів 1,6 млн
Backyard Squirrel Maze 1.0- Ninja Warrior Course
20:21
Mark Rober
Переглядів 124 млн
#супербабуся #мотоцикл #bambiracer #tiktok
0:49
Чудо Острів
Переглядів 199 тис.
уаз и поезд
1:00
Безумие и отвага
Переглядів 3,7 млн
Red colour Jetta logo install Part 1
0:14
Bilochpuratips Automobile
Переглядів 3,3 млн
He cuts the lawn by DRIFTING
0:11
Frankie Lapenna
Переглядів 3,3 млн
Ява 638
0:50
TS Moto
Переглядів 467 тис.
Air Powered Motorcycle 😮
0:11
Harley Davidson People
Переглядів 7 млн