It feels like shrinking down and driving an RC car now that it has 56KW and 4WD 😂LAST WEEKEND TO ENTER THE GIVEAWAY grindhardplumbingco.com/

The couple seconds of silence at the top of that hill then …”pop” and backwards you go was priceless..almost like an amusement park ride!

6 day late club ⬇️

The Chang Li build is my favorite series on UKposts right now. I want one!

Ethan is like the Red Foreman of this operation, and Will is totally Kelso. Edwin might be Eric... The family dynamic is great, but Ethan just can't resist busting their chops every day :D

That was the most terrified I have been in a long time!

39:41 That suspense music end combined with the "Uh-oh" is comedic gold.

And the next time on Grind Hard Plumbing Co: "We gutted the Chang Li again. Shoved in the drive train of a 1400kW Rimac Nevera. And put it on 58-inch Mickey Thompsons."

This things nuts haha. I've built dual motor RC Cars before, and if you have independent motors driving front and rear axles, the front always spins up more. When you accelerate you get less load on the front axle, so the motor is able to get higher RPM's than the rear. Even when you use separate speed controllers. For the same throttle input, the front can spin faster with less load.

We really do love this little car!

I love how you give Will free reign to do whatever and you guys are just there to make sure he doesn't die or catch fire, or smash his phone screen😂

34:20 Seeing that ladybug drive across the road from the outside and being able to hear you guys laughing is "premium" love it!

I've always wondered, it's not quite your style to have it only rear-wheel driven. Glad you're doing it all-wheel drive now 😁

Uploaded right before the first day of my new job. This definitely settled the nerves down and improved my mood a lot. Thanks guys Edit: To all of the incredible and kind people who commented below; The first day went a lot better than I thought it would!! I know it sounds a little cliché but it was some hard work that made me feel like I was truly working for my pay. The future is looking a bit better now and I finally got some of my self esteem back. Thank you for all of your amazing comments and for being such awesome people. Your comments alone gave me the push I needed to step through that door. Bless your souls❤

You van tell Ethan has taken Will under his wing as his student. Teaching him to become a better welder, fabricator and overall builder!

After like 2 months since I've seen the first monster chopper video, I have to say I'm a huge fan of the videographer for this channel so I want yo shoutout him and the person whose editing these videos. These right here is a ton of work so I want to recongnize him or them

"i be workin under chang-li's all day, my hairs burnin' up" is probably the best will quote of all time.

Ethan wearing Fab Rats merch is pretty sweet I love when channels collab

Saw the title and immediately clicked "play". These dudes are awesome. I'm 59 and love that they are doing things I've wanted to try. Pass or fail, it's all in the name of progress. (Or it could be construed as ignorance and fool hardiness. Either way, it's fantastic!)

Roll cage sounds like a good idea. lol Maybe a grappling hook too. Might be handy on those brakeless mountain free falls. 🤣

you guys just need to put acrylic floors in it so you can still see through the floors. Great content as always. Keep up the great work

Its always awesome to watch people grow and learn through trial and error! Awesome work!

"if it looks straight it is straight" - @jimmy diresta for the last 20 years, wise words!

I want to thank you explicitly for not recognizing the front bias issue, re-tweaking the thing, and then doing a "first test". I am not saying that's what you do but I love seeing the raw production and reaction from all of you. Thank you gentleman.

I have been here since day one, well pretty close to day one. But i think Will makes the channel alot of fun glad you all are doing what u are doing. I really enjoy the videos.

As far as the pinion oiling goes adding some shallow cuts across the outside flat face of the ring gear will make it sling more oil up onto the pinion bearing.

24:10 Ya'll ever seen a tool for straightening bent flanges like that. Its essentially a regular hardened steel Tool with a roller attached to the end. You mount it in the tool post and use it to push the flange back into trueness. Very quick dirty way to fix out of round flanges.

Thanks for that. You really really made me chuckle. Keep up the good work.

Your editing is top-notch as always. Easily my favorite put together videos.

18:17 I'm not sure you want to be known as the "One try wonder willy" 😂

Anyone else watch these videos and try and spot the mobile in the back pocket 😅

This was one of my top 5 videos from grind hard. Love it. Will is getting way better explaining what he's doing.

Just waiting for the "We put a 1000cc engine in the cheapest car in the world" video lol. you guys are great, keep it up, love the pod too

Best opening segment yet!! Always killin it with these edits!!

I really hope you guys go all out with this build. Don't stop keep going make it super clean!

All the way from the build process to the adventure of trying to get it 100 miles, this is probably my favorite video series! Love it!!!

"You've got to admit, it is pretty impressive" 🤣 Indeed it is, indeed it is!

Fantastic, well done Will!

This one of the only channels that really gives an in depth look at the difficulty of fabricating and machining one-of parts that are ACTUALLY STRAIGHT AND TRUE. Most channels just edit out the part where they realize simply owning a lathe doesnt make you a machinist

Just loving to watch you grow in skill Will!!

That's brilliant and so much fun, what a machine it is now. Well done brilliant video. Keep them coming mate.

i really like that you can switch the rear diff on and off i think once you figure out when and where to switch youll know what to use and when to get through places you cant even walk easier

Will and Edwin are an unexpected super-team!

This is the dumbest and the best thing on UKposts ❤ lots of love guys!

Good to see the end result of the work we could pick on all the other videos from the channel when you were working on the monster bike

This episode absolutely felt like an evolutionary leap in your videography. And that is coming from something extremely enjoyable. You take simple backwoods workshop stuff and make it a real production. I love it and if you guys are ever in Western Washington you have lunch or dinner on me, just shoot a message.

The only good part of having your own business is that you can see that a UKpostsr you like has posted a new video and have the freedom to watch it. 😂😂😂

4-second gang love the mini-car series

This is awesome,a few friends and a great day.keep on keeping on men!!

Some of my favorite builds on YT rn‼️Grind Hard is goated🐐💪🏽

1 hour club ⬇️

Your videos feel like a TV series Iook forward for. They're absolutely amazing ❤

I'm so excited to see the next iteration of body work on it!!!

Sick build. So awesome that you guys reused the Kei truck rear in the front with all the axles matching the rear width 👌 Will, dude I'm impressed especially for the first drive . Well done dude 👍 I would love to see how capable it really is, when you guys get some gripy tyres for it 😎

You guys are awesome haha, i love how this project is coming together and I CANNOT WAIT for the adventure to come and to see it completed! I was going to suggest wheel spacers but then y’all added them this episode lol, y’all need to figure out how to make this thing geared lower so it will be better at crawling, and maybe try to add some more weight over the front wheels, also y’all should get a better steering wheel for this thing and do something with the headliner lol but hey all in due time!

That was hilarious. The editing and music on that last scene was perfect.

I love what you guys are doing with this thing. Can’t wait to see you guys go more places you can’t even walk.

You guys driving that thing and the reactions, pure comedic gold...

definitely needs that cage for some proper chassis rigidity and refining of some of the electronics. also some better tires. but for what it is right now its super cool. frankly some improvements in the future to make it truly last like proper torque specs in the differentials and other future proofing would be cool. this build and all the work you put into it definitely deserves some permanence in the grindhard vehicle family. once everythings said and done and you've made the improvements stated at the end of the video, this thing will be up there with the kernel and it would be a shame to let it fall into disrepair and become a parts vehicle like the other wacky projects that are forgotten about. tragedies like sendy and the odyssey for example.

Such a fun build. Keep up the good work.

That was soooooo funny thanks boys. Could we get an episode where you can go a bit more in depth with the cost of some of what it takes to get one of these machines up and running? Thanks!

Cant wait for the 100 mile challenge. I've been eagerly awaiting for this build to finish. So glad its 4wd now.

So glad Will got the Razor Electro and Co 72v kit because that started his path into the addiction of electric vehicles.... Hopefully I can get one of those kits before they're gone because they are crazy powerful. 😁👍❤️

This is an amazing project. Will’s fab skills continue to improve, well done! Ethan props for doing a good job of mentoring.😊

Good job guys letting Will really start to fabricate on his own projects. I think this is the way to go. It's the same attraction we had watching Ethan grow over the years. Watchin Ian and Will drive that thing around looked like they had a genuine blast. Good content guys! 👍

The choice of music on this one made it feel like The Trailer Park Boys! Nice mood. 🤓🙏🏼

Great video guys. Love y'all's content.

When you stalled on the hill was hilarious, I do same stuff when test driving my builds, lol.

There's RC cars, and then there's WC (willy controlled) cars.. jank to the next level! I actually love the way the chang lee looks now. Ripping that small tree out with the front wheel burnout was great. And Will, the welding and design is getting pretty darn good!

Always a good day when grind hard posts a video!

i have fell in love with the jank chang lee that car is a kool little car and the things you guys are doing to it looks awesome and seems like it would be a really fun little project

Lol, the moment the car stopped at the top of the hill, Will says Uh oh, then the car starts rolling backward down the hill, lots of yelling and panic ensued. Great moment

Best entertainment and frikking funny. You guys made my evening highlight. Cheers from Australia ❤

I had to comment straight off the bat! Turning that over on its side and seeing him end up on the passenger side was priceless! My stomach hurts from laughing so hard!🤣 Glad he isn't hurt!

A good leader produces great students and Wills increasing skill level shows just how great of a teacher Eathan is.His age and inexperience still shows up though sometimes and it's great for a good laugh

I have been wanting to see a vehicle cab on a quad for literally years, this concept is amazing!! I wish I had something like this, it looks so FUN! I wonder how it handles in snow, how exciting!!😅 you guys are epic. I have a prediction that you guys might try slightly* larger tires, but I wouldn't be shocked if you didn't tho.

Love the video!! Try flipping the open end smallest tooth towards the direction you are cranking on, saw you had er flipped when trying to break free those rusted nuts on the shock top. Makes it slip off less.

First video i've seen from you guys, this was VERY entertaining

The ebb and flow of the shear chaos of will builds and the zen master craft of Ethan builds is the secret sauce that keeps me coming back.

Good times guys!!! Thank you!!

The chang li always puts a smile on my face! Great work Will 💯👌 of course Papa Ethan and Edwin too. I feel like once these catch on. y'all should start a whole club of custom chang li rock climbing. Places you can't even walk challenge 💪💪💪. That thing looks very Premium. Like it should of always looked. Suspension flex is very impressive too.

Them getting stuck and then rolling backwards was the funniest thing I've seen on UKposts this month. Pure comedic content 😂

The chang Lee is looking awesome. Great job, gyes Great show ✌️

I've been waiting for this one!

Fresh drop!!! Keen as bois for this adventure

Wills love for the changli makes me love it more every time I see him working on it.

This thing is FUN! Loved this episode. Have you figured out how to get some range?

I have never been more excited for Fridays. Ethan and Will are my two favorite people on the platform right now. And Edwin the production level going into the videos is absolutely insane these days. Much love from Northern WA 🫶🏼 Keep up the hard work guys

love what you guys do! u do great work.

Jank li is gonna be a freaking beast!! Thanks for the video guys..

The chang-li and the monster chopper are now peak ghpc. Never thought id say that after the barbie jeep or colonel senders, but here we are

That intro was killer, you guys genuinely deserve your own tv show

Wills "places you can't even walk" while welding under the front end is just perfect. So matter of fact. It's on a shirt!

Wills putting his heart and soul into this and Ethan crushes it yet again

I stumbled across your guys channel years ago when you hotwired the Tacoma. It's so insane to see how far y'all have come. From the taco to barbie cars to chang lee. I fucking love it! Premium!

how can you not love a grind hard video

Man, the editing quality of these just keeps getting better and better

Man dope build !! I have some design suggestion, when designing structural part like motor mount 28:39 to ensure most integrity from the material, drill hole at least a thickness away from the edge. That way there is no way it will snap under load.

There isn't a build on here that isn't straight up entertainment! You guy skill it and I love your enthusiasm. The Chang Lee is Jank in all the right ways!

Winning anything is cool but a weekend with y'all would lifetime. Love from Texas