Smallest and cheapest microcontroller - tutorial
Переглядів 102,756
5 років томуSUBSCRIBE HERE:
/ @volosprojects
I will try to show you how to use and program PIC10f200. This thing is realy small, only 3 mm long. It is also very cheap, you can find it on Internet for around 30 cents.
I am working hard to make quality content every week, feel free to check my channel and subscribe!
Thank youi My channel: / @volosprojects
Follow me on Instagram / volosprojects
www.ebay.com/itm/5PCS-MCU-IC-...
We will program this microcontroler using this pickit3 programer, i bought mine on ebay and it was around 11 dollars.
www.ebay.com/itm/PICkit3-PIC-...
This device is realy small so we will need to use these adapter PCB board to use pic10f200 on breadboard. Adapter boards are very cheap, i payed 1 dollar for 10 of them on ebay.
www.ebay.com/itm/10PCS-IC-SOT...
Download MPLAB IDE here :
www.microchip.com/mplab/mplab-...
Code:
drive.google.com/file/d/1zqdK...
@3DComputing 2 роки тому
Always love your simple no fuss videos - THANKS
@arduinoguru7233 4 роки тому
Thanks for mention PIC Microcontrollers since very few people talk about it .
@microdesigns2000 19 днів тому
I love PIC microcontrollers since 16F84 and 16F877. Which are your favorites?
@FabiansLab 2 роки тому
amazing soldering skills. I couldnt have soldered that without a hot air station
@u2bist 5 років тому
Really nice video! Very clear and well done. Thanks!
@fifaham 2 роки тому
Job well done, keep doing more great projects.
@ihtsarl9115 Рік тому
Thank you for this tutorial very good explanation.
@JbSun-power 3 роки тому
Great way to teach and explain thanks
@Link-channel 3 роки тому
You always show cool stuff i never heard about! This channel is awesome 😃
@crewaxl2697 2 роки тому
You all probably dont give a damn but does anyone know a tool to log back into an Instagram account..? I was dumb forgot my account password. I love any tips you can give me.
@albertrandall3603 2 роки тому
@Crew Axl instablaster =)
@crewaxl2697 2 роки тому
@Albert Randall thanks for your reply. I found the site thru google and Im waiting for the hacking stuff now. I see it takes quite some time so I will reply here later with my results.
@crewaxl2697 2 роки тому
@Albert Randall it did the trick and I finally got access to my account again. Im so happy! Thank you so much you really help me out !
@albertrandall3603 2 роки тому
@Crew Axl Glad I could help =)
@electronic7979 5 років тому
Useful video
@paradiselost9946 7 місяців тому
now this would be fun to try efi with. done it on a 12f683. AD may be a problem. maybe a comparator and CR time constants... only need map and crank signal, easy!
@AtlasReburdened 5 років тому
It's the smallest I've seen, but the cheapest is an 8 pin that uses PROM for program storage and comes in at $0.03USD for single units. You're right about it being a pain though.
@ArjanvanVught 5 років тому
Another pain with this $0.03USD chip is that you need a programmer for $100+USD. And maybe as well an in-circuit emulator as you can program it once.
@masaratech 5 років тому
i hope soon someone could build a cheap programmer for it, it will be very great to play with those cheap uC
@masaratech 3 роки тому
watch this: ukposts.info/slow/PLvOlSehNtuHsiF93KOLoF1KAHArmIW9lC
@ryanchowdhary965 Рік тому
@@masaratech just use arduino
@loafandjug321 Рік тому
@@ryanchowdhary965 Arduino is the size of a Buick.
@riobluespartan6350 3 роки тому
Very helpful thank u
@richardballinger517 Рік тому
Perfect, I'm looking at the same pic for a very similar use on a motorcycle.
@microdesigns2000 19 днів тому
On a bike? I wonder what for? Do share!
@richardballinger517 15 днів тому
@@microdesigns2000 I'll let you know when I've built and tested the prototype.
@FloppyEmulatorPicF 3 роки тому
very good
@weerobot 5 років тому
Awesome video...
@rasheedmalik6594 5 років тому
how do u program it?
@Swenser 11 місяців тому
I'm trying to fix a simple coffee filter machine . It's crazy . It has an 8 bit microcontroller inside. It's buzzer goes off and both lights come on display. Not sure if mc has failed or just one of the input pi s is getting an error.
@Bianchi77 3 роки тому
Cool video, thanks :)
@RahulSingh-my7vx 5 років тому
sir when i program attiny85 with Arduino and Arduino ide and it is showing error yenkie invalid device check your connection double
@fifaham 2 роки тому
@3:40 I wouldn't recommend that you solder pins or boards while plugged into the experimental plastic sockets, this is because those plastic sockets are susceptible to heat and may melt or bend causing electrical disconnect, or intermittent disconnect. This will cause circuit operation problem. Instead use stand alone IC chip sockets or aluminum tweezers to hold those SMD pads and parts while soldering them.
@fifaham 2 роки тому
Or you may dedicate one experimental plastic socket for those kinds of soldering operations but never use it for circuit testing. Then mark it as not for circuit testing.
@NicksStuff 3 місяці тому
Have you seen there are open source tools to program the chinese $ 0.03 MCUs now?
@johnnybegood2002 7 годин тому
I have an HT48R32-B-0 microcontroller in my hi fi audio amp and need a programmer to copy it to blank one so I can fix my other amplifier. i have the original chip so i just need to copy the info from one to the other . What exactly do i need?
@Nazaro4ka 4 місяці тому
I have an experience working with stm32. is it possible to configure this kind of small microcontrollers using higher level programming language ?
@nelsonza6403 2 роки тому
10 puntos muy bueno
@GregWoodsLancs 4 роки тому
It still amazes me how that power setting is so vital, yet so difficult to find. Terrible UI design from Microchip!
@mglepd 8 місяців тому
Thanks, but link to the code is broken.
@eddiemcboofin1917 10 місяців тому
Whats the music in the background?
@aimless3827 3 роки тому
It's looks like attiny10 but I don't know what could it be used for.
@alansanders6960 2 роки тому
Can you get them mounted on the adapter board? I don't know if I could solder anything that tiny.
@robertweekley5926 Рік тому
There might be Soldering Tips smaller and better suited for jobs like this, and a Lighted Magnifying Glass on an arm, to make it appear big enough to manage.
@gartmorn 5 років тому
How about a video on making up programs for this chip? I think it's a bit trickier than Arduino? I have still to be brave enough to try the pic! There are probably already programs on the internet to try I suppose?
@VolosProjects 5 років тому
Good idea, i will explore some beginers PIC chips and some examples. Tnx for sugestion.
@brownp93 5 років тому
@@VolosProjects Is this a one shot program send or can you reprogram the same chip multiple times?
@VolosProjects 5 років тому
you can reprogram this chip as any other PIV or AVR microcontroler. But i know that there are some chines 0.08 dollars microcontrolers that can be programed only once
@john_hind 3 роки тому
Roll on a couple of years and there is the improved PIC10F32x. But STILL no serial peripheral! This really frustrates me about the 6 and 8 pin PICs and AVRs! Surely the obvious use case is intelligent peripherals: putting a single sensor or actuator onto a serial bus? Yes I know you can bit-bang a serial peripheral, but that is hard work, consumes a lot of the already limited resources and will not be as power-efficient. This use case is so obvious it really baffles me that Microchip keeps missing it!
@shrikantnikam2426 2 роки тому
Can i program without pic kit?
@DigitalYojimbo 5 років тому
you should look into CH551 chips so cheap like $0.06/each and so much more power than the pic10f200
@roidroid 4 роки тому
where? edit: CH551 chips are more like 20cents, not 6cents.
@eidelpulicorre4773 Рік тому
Is that possible, to program in c or c++
@nodwas1 5 років тому
hi the link for code to download not working.
@NishantjonyJaiswal 5 років тому
👍
@qwertykeyboard5901 6 місяців тому
Like, holy FUCKING shit. That spec of DUST is a computer!
@chainhonglim1281 3 роки тому
May I ask, is pic kit 3 able to program Atmega328p?
@TheMechatronicEngineer 3 роки тому
No. You need pickit 4.
@laboraoriox9981 Рік тому
would it be possible to create a bitcoin hardware wallet with nfc and a micro sd using pic10f200?
@VolosProjects Рік тому
i dont know that, i am not crypto user and i dont have expirienc with PIC
@laboraoriox9981 Рік тому
@@VolosProjects got it. but thanks I'll try to mount it with atmega.
@zachreyhelmberger894 4 роки тому
Can it do i2c or SPI?
@canaDavid1 3 роки тому
You can definitely bit bang it atleast :-)
@narutonto333 3 роки тому
What program lenguaje Is he using?
@BrianPletcher1 3 роки тому
Assembly
@vinyltheif 3 роки тому
You pointed to pins 4,5 & 6 in the wrong order.
@markw1202 Рік тому
@ 3:59 wire going to pin6 was called pin4. Kind of confusing, but I'm learning. Great video.
@etaashmathamsetty7399 3 роки тому
attiny 10??????
@zannfox1082 4 роки тому
that's not small this is small Kinetis KL02 MCU (1.9 x 2.0 millimeters)
@ozdemirsalik 4 роки тому
ATTİNY10-MAHR is also 2mm*2mm in size. I wonder if there are mcu smaller than those.
@ozdemirsalik 4 роки тому
Also you can find a thin WLCSP20 package of KL02 sized 2mm*1.61mm
@statinskill 4 роки тому
Could have used a Padauk PMS150 for 3 cents. Not 30. 3 cents. It comes in a SOP8 package, 6 IOs, 1024 programming words, 60 bytes of SRAM, just perfect to blink a bunch of LEDs.
@muf 4 роки тому
ATTINY10
@typingcat 3 роки тому
I don't get it. If one has to use an adapter board because the controller is too tiny, why not just use a bigger controller? The price difference should be negligible for an individual who uses only one or two of them.
@josephdailey2610 2 роки тому
That's just it - this is really meant for industrial integration in custom boards, not hobby projects. But it's a cool novelty to play with.
@VeritasEtAequitas 4 місяці тому
Because the world doesn't run on Arduino , aka baby's first MCU.
@flavortown3781 Місяць тому
@@josephdailey2610ummm have you ever heard of PCBway?
@microdesigns2000 19 днів тому
I think there are several reasons, especially size. I think there is another microcontroller in a transistor package, even less expensive, but it is not really smaller and has fewer io. The last reason to use this processor is bragging rights, lol.
@vongerchin6725 4 роки тому
PMS150C only 0.03$ :')
@UReasonIt 4 роки тому
The programmer is hard to get outside of China.
@masaratech 3 роки тому
@@UReasonIt watch this: ukposts.info/slow/PLvOlSehNtuHsiF93KOLoF1KAHArmIW9lC
@HOLLER251093 2 місяці тому
exelent video, only the code link not works ;)
@jimh3595 2 роки тому
Link to code is broke.
@TheJavaSync 5 років тому
OMG ..
@hsengineeringsupport 2 роки тому
Bhi no boo
@qwertykeyboard5901 5 років тому
can it run crysis?
@za_ozero 4 роки тому
Microchip is No way cheap
@VictorToroMostajo 5 років тому
Veo que hablas español. Podrías dar los vídeos también en ese idioma por favor.
@codebeat4192 4 роки тому
Ah, tiny is attractive (and cheap)..... This is only of interest when you need this device for mass production, for prototyping or hobby it is pain. You need an adapter, a programmer (and a breadboard), special software and must know assembler very well because it is tiny maximum. How tiny, you didn't notice in the video anyway. What can be made with it except blinking LEDS, can it do something useful? Is it worth the hassle anyway?
@oniruddhoalam2039 4 роки тому
It can be good for projects that have to be made small.
@TymerTopCat 4 роки тому
Using Assembly language to blink an LED? Good grief! Why not use dip switches to set the program code.
@Mikere5 4 роки тому
nothing wrong with assembly.
@LTVoyager 8 місяців тому
Use Python to blink an LED? Good grief! Why not use a sledgehammer to swat a fly?
@bitlong4669 3 місяці тому
Obviously it’s just an example. You can do neat things with these. I love how tiny they are.
@IlijaIlijic 3 роки тому
Cekaj bre, odakle si ti? Pise pretrazite google
@VolosProjects 3 роки тому
Bok susjed, iz Hrvatske.
CircuitBread
Переглядів 141 тис.
BuildYourCNC
Переглядів 137 тис.
Tech Electronics BD
Переглядів 2,3 млн
Amway Home Goodies
Переглядів 12 млн
300 000 за🚀МОЩНЫЙ, Но МЕРТВЫЙ ноут из Китая. Ремонт cyberpowerpc tracer 7 EDGE. Нюансы китай ноутов.
ААНТ КОНТАКТ Сервис по ремонту техники в ЕКБ, СПБ
Переглядів 59 тис.
НедоNews
Переглядів 25 тис.