Soldering Header Pins to your Raspberry Pi Pico
Переглядів 26,324
3 роки томуThis video covers how to solder header pins to your Raspberry Pi Pico board to make it breadboard friendly. Soldering the Raspberry Pi Pico is a straightforward task and is simple even for those new to soldering! Make your Pico usable in your breadboard based projects by following this video.
If this video helped you, please consider leaving a like and subscribing, thank you!
You can find more embedded systems tutorials and projects on my website learnembeddedsystems.co.uk
-- Equipment I use regularly --
The following links are affiliate links where I may make a small percentage on qualifying sales through these links. Use the respective UK or US links listed.
Budget Soldering Iron: UK: amzn.to/3pQpvUu US: amzn.to/3bBawIJ
Breadboards: UK: amzn.to/3solZCe US: amzn.to/3dGsHiS
Jumper Cables: UK: amzn.to/37JfToi US: amzn.to/3r384S9
Camera: UK: amzn.to/3qKLwFr US: amzn.to/3pK0V7C
Lens: UK: amzn.to/380lQxp US: amzn.to/3knH3WL
Tripod: UK: amzn.to/37H0Nzw US: amzn.to/3byKHsV
All videos and tutorials on this channel and mentioned websites are for educational purposes only.
@shaunnichols4664 Рік тому
Damn, I have about 10 or so Zero W's I soldered (partial) headers to. The hardest part was making sure they were straight, even though it didn't really matter for what I need. Never even thought of using my breadboard to hold things.🤣
@gio5969 10 місяців тому
You might want to alternate from one side of the header to the other i.e. pin 1 then pin 20 then pin 2 then pin 19 etc. The reason is to let the pin you just soldered to cool a little. If you do it the way show here, ie. pin1 then pin 2 etc then it is possible for the header plastic to melt in that area. Guess why I suggest this?!
@wizarddrongo Рік тому
Good soldering technique and good tip about using the breadboard...I always just end up balancing things on other componnents, a pencil etc...
@ijmad Рік тому
Really appreciate this advice! I haven't touched soldering iron in about a decade and even when I did I wasn't very good. But I think thanks to this video I managed to get my Adafruit board's headers soldered on. Not quite a Pico but very similar challenge!
@KarelNenicka Рік тому
thanks for the trick with the breadboard, saves a lot of effort!
@ethanspitips5903 3 роки тому
Like the soldering guide! Gonna follow this when I get my header pins. Thanks!
@LearnEmbeddedSystems 3 роки тому
Let me know how you get on! :)
@theforgottenprince1765 Рік тому
you helped my soldering so much, Thank you so much! (Liked and Subbed).
@ticketstation Рік тому
Thank you much❤, seen a few of these. Cleary you can see the solder touching. But Nobody was saying that, And I want to hear it. As silly as that may be, thank you for the extra specific❤
@JoseGustavoAbreuMurta 3 роки тому
Suggestion - Use cold LED lamps to light your videos.
@LearnEmbeddedSystems 3 роки тому
Thank you for the suggestion, I will look into grabbing some LED filming lights for the channel.
@matteoo3923 3 роки тому
I don't know why everybody cuts the "pushing the header pins into the breadboard" part....
@HopWorksET 5 місяців тому
This is a great idea but isn't there a risk of melting the plastic of the breadboard? I always worried about that so I never did it this way. I do have a few older dirty breadboards I could try this on to see. Thanks for a great video! Where did you get that breadboard you showed? I like its configuration! THANKS!
@andrewhartley8781 3 роки тому
Which breadboard are you using, where did you buy it from?
@penguins0392 6 місяців тому
How much would the most basic soldering kit cost? I just bought a pico. I have no other soldering tools.
@michaelsakowicz718 Рік тому
This may be a dumbquestion, but, just to test the capabilities of the pico with a breadboard, can the pic rest on the headers like you show at the beginning and be used with the device BEFORE the soldering is complete? Do that make sense? I do not want to solder until I am comfortable with the usage is why I ask.
@LearnEmbeddedSystems Рік тому
Not with normal header pins as the contact between the pins and pads on the pico won't be good enough. You could try with something like pogo pins but at that point it's probably easier to grab a spare pico and have a go at soldering!
@michaelsakowicz718 Рік тому
@@LearnEmbeddedSystems great- thank you :)
@christopherlewis8519 Рік тому
what temperature should my iron be at though?
@deltakid0 2 роки тому
why don't they come already soldered as in other microcontrollers???... They haven't learned the lesson about the end-user needs on just buying the thing, plug, and play.
@kiven_gamez4474 Рік тому
they do but it costs extra...
@deltakid0 Рік тому
@@kiven_gamez4474 then charge _the extra_ instead of selling an incomplete thing
@Handlebrake2 Рік тому
@@deltakid0 lol, I feel you. Soldering fumes scare me!
@opalcitrine Рік тому
@@deltakid0 not everyone wants the headers pre-soldered. Schools often buy these because they’re cheap and accessible, and learning how to solder is part of your education as an electrical or computer engineer.
Learn Embedded Systems
Переглядів 37 тис.
Осторожно: Собчак
Переглядів 7 млн
Learn Embedded Systems
Переглядів 26 тис.
M Heidenreich
Переглядів 49 тис.