Soldering Raspberry Pi Pico - Collin’s Lab Notes
Переглядів 154,313
3 роки томуPick up a Pico at Adafruit:
www.adafruit.com/product/4883
Get your Pico prepped for usage by soldering two strips of headers - and you’re good to go. #raspberrypi #adafruit #collinslabnotes
Visit the Adafruit shop online - www.adafruit.com
-----------------------------------------
LIVE CHAT IS HERE! adafru.it/discord
Adafruit on Instagram: / adafruit
Subscribe to Adafruit on UKposts: adafru.it/subscribe
New tutorials on the Adafruit Learning System: learn.adafruit.com/
-----------------------------------------
@quantumleaper2625 3 роки тому
At the end of every soldering video, be sure to send folks over to your flux cleaning video.
@jimmy3797 4 місяці тому
when i’m done soldering, i just use my alcohol and wipe it clean. I recommend getting a no clean flux pen, works great
@phyranios9091 3 роки тому
For spicy solder joints use flux! Most solder has flux inside but results differ
@infected7258 10 місяців тому
But it’s better to still use some, the Flux that comes in some solder won’t last you enough to get a good connection, especially if you’re just starting to get into soldering
@cam5816 Місяць тому
What do you mean by spicy? What does this do?
@phyranios9091 Місяць тому
@cam5816 I just mean nice, sleek and you get that nice adhesion effect with no blobs or beads you know?
@Cavemancat88 5 місяців тому
That side shot with half the headers bent out gave me a heart attack
@JJ-fr2ki 3 місяці тому
Pimoroni sells snap pins that don’t require soldering. They are almost life changing, especially if teaching large groups of kids. Best to avoid soldering irons and now we can.
@plazmadolphin5081 3 роки тому
Personally I prefer soldering header up, that way I have more room on my breadboard
@dennisfahey2379 5 місяців тому
Breadboards are not soldering fixtures and you can ruin them that way.
@emmaeilefsen7214 4 місяці тому
you can get these small ones as cheap as one single dollar.
@muka_32 3 місяці тому
True. I believe he was brutal. I would’ve soldered only the corner pins and take the board off.
@throwaway3873 3 місяці тому
if you're that clumsy you shouldn't even be soldering 😂. what is he going to do? fuse the bread board to his chip?
@cryingcrown 3 місяці тому
@@emmaeilefsen7214especially the one they are seemingly using the semi transparent color yet fully opaque is usually a sign on being cheaper
@jptrainor 3 місяці тому
The solution is to get a black marker and write "soldering fixture" on the back. Now you have a soldering fixture.
@Shishou_Shi 4 місяці тому
Depends on your project, there are a lot of instances where you do not want those bulky pins.
@elektron2kim666 Місяць тому
I solder wires to some of those Pico joints too. A breadboard wire chaos can reach insane heights. SD Card, touch, display THEN a keyboard and I'm not joking. Usually it's because a hat closes for more. Some more inventions would be nice. A breakout is easier, but also bigger.
@talamon6832 3 місяці тому
If you have no soldering stuff, buy a Pico H… header pins are premounded for 1$/€
@crashmatrix 6 місяців тому
Already in the breadboard, and slightly off kilter, as is tradition.
@maxito9984 6 місяців тому
if you do it like this the breadboard's plastic is going to melt
@sloppystyle 6 місяців тому
no it's not
@unicodefox 6 місяців тому
yes it is, i've done it like this before@@sloppystyle
@sloppystyle 6 місяців тому
@@unicodefox nope.
@unicodefox 6 місяців тому
@@sloppystyle my brother in christ you cannot just nope out of someone's personal experience
@sloppystyle 6 місяців тому
@@unicodefox just messing around idek what a pi pico is lol
@JohnyIIOh 9 місяців тому
Thank you!
@SamirMishra6174 8 місяців тому
Very helpful
@jackwaycombe 3 місяці тому
Tiny electronics suitable for attaching to motherboards/breadboards. As opposed to making them a manageable size in the first place.
@ErtugrulOzdemir-mf1gl 3 роки тому
thanks collin
@anonuser2640 6 місяців тому
Amazing
@MrSeanana 3 місяці тому
Is that flux core solder?
@Learning-jl8zt 4 місяці тому
Do you have to have pins on it for it to work or? I'm new to this
@BryanTorok 3 місяці тому
If you are building a specific project or embedding the controller as part of a larger circuit, you can solder wires or components directly to the pads. But, if you are experimenting or designing something new, the pins on a breadboard can be very convenient. It also allows you to take it apart and reuse the parts on another project.
@gamer_twarit9521 7 місяців тому
Is it mandatory to do solder it, can we do it without soldering it on the breadboard?
@opinion_panda 6 місяців тому
Yes. I typically solder one corner, then while the solder is still molten (tip applied) I adjust the header and solder the opposite corner of the same header. Easy peasy.
@shlokbhakta2893 6 місяців тому
Anything is possible if you put your mind to it but, it is HIGHLY recommended you soldier it, it’s also just a good skill to have 👍
@petermichaelgreen 5 місяців тому
A pin simply sitting in a hole in a board without being soldered and without anything to force the pin against the side of the hole will not make anything resembling a reliable connection.
@tuankumiskotak 3 місяці тому
if you doing this kind of work then use hot air gun and solder paste, save so much time
@AureliusR 7 місяців тому
I was taught you should never put square header pins into breadboard as it damages them. You're ideally supposed to use the machine pin circular ones.
@sloppystyle 6 місяців тому
it obviously doesn't matter
@AureliusR 6 місяців тому
@@sloppystyle If you care about your equipment and tools it does
@sojanvm9060 Рік тому
🌷🌷👍👍👍
@madlycan 8 місяців тому
Nice "3
@kataseiko 2 місяці тому
Make sure your breadboard doesn't melt from your soldering iron's heat. I still have an Arduino welded permanently to a cheap breadboard because of this.
@NessPaMC 3 місяці тому
pico 4 ？
@isheamongus811 6 місяців тому
Pico H?
@Jummsly 3 місяці тому
Whats wrong with birdges? I dont know whats wrong with them im just wondering
@jptrainor 3 місяці тому
The pins are electrically connected by the solder bridge.
@adrianthoroughgood1191 6 місяців тому
I would be very nervous about causing heat damage to the chip. I'd prefer to buy it already soldered to avoid that risk. But i sould like female headers pointing up so i can stick wires straight in without having to use a breadboard.
@brifind7596 5 місяців тому
Install on switch)))
Adafruit Industries
Переглядів 194 тис.
Синема Плаза
Переглядів 570 тис.
Adafruit Industries
Переглядів 39 тис.
Adafruit Industries
Переглядів 122 тис.
Creative Passion 88
Переглядів 786 тис.