The whole model is amazing, the exhaust system is a work of art!
@mikeinvegas13 роки тому
Beautiful build and work
@billyandriam3 роки тому
Thank you very much Steve. This is impressive and inspiring at the same time.
@brandonrodgers24792 роки тому
This rig is amazing! Ive heard that if you run a smaller rubber hose through the aluminum pipe, then heat it and bend it, it will help it keep its shape better and prevent the crimping. Best of luck!
@markbrown73573 роки тому
Amazing Work Steve - Loving the exhaust system and gearing is a work of art - hope you are feeling better soon fella
@Blacklamass3 роки тому
Yes I’m doing ok mark 👍🏻
@deweybowser7962 роки тому
That is one awesome Truck very nice work. Love it
@NReyesPro3 роки тому
Jeez Man ... i just found your channel and i am very impressed with the work on the toyota truck with the twin cilinder wow ... epic stuff man ... your entire installation is incredible ... i love this ... i have a TRX-4 Defender Scale that i love so much but i might sell it and get these parts and do this project ....
@Blacklamass3 роки тому
Thanks I ran it today fantastic
@The-50-Simmer3 роки тому
excellent job. really great vid.
@stevenwalker18833 роки тому
Lovely rig man. Heads up about those kyosho gears. The shift dog eats right through the cam on the gears , my gear only lasted 3-4 litres before death.
@DomVito87Рік тому
I did a brusier clone with a toyan fs100. Tmaxx trans an a transfer case. Runs well!
@dennisdempseyradiooutofcontrol3 роки тому
Looking really nice Steve! I admire your attention to detail on your builds, hope all is well with you, I was running my conversion today to get rid of some old fuel (I cant keep a solid tune on the old stuff) old fuel 2 carbs 2 glow plugs....lol
@DanielHernandeztinkers3 роки тому
Same here Dennis, I tried using Traxxas 20% and I think I bought some old stuff sitting on the shelf because I couldn't get my L200 to run right it had no power and kept stalling so I switched to Cool Power Morgan 20% fuel and all my problems went away!
@Blacklamass3 роки тому
I found they other two single cylinder Toyan engines run much better on a castor based fuel, not sure about these twins though
@dennisdempseyradiooutofcontrol3 роки тому
@@Blacklamass I also realized that, I used the same fuel on my V4 right after that video and it seemed fine in it, I have some old 15 percent castor fuel im going to run in the L200 today to see if it helps.
@dennisdempseyradiooutofcontrol3 роки тому
@@DanielHernandeztinkers I just ordered some of that fuel lol, hopefully it will be here soon so I can get back to tearing up the terra firma , funny how some engines are partial to certain fuels. Thanks for the heads up!
@kayerickatson48143 роки тому
I like the white one the most, as you point out, it sits lower. It’s a realistic look.
@istayhighi15402 місяці тому
I was planning on getting one of these. Do you have an idea of how hot the engine gets?I was thinking of having a lot of 3d printed parts and wondering if they can hold up to the heat.
@jakubtomas52302 роки тому
that free space is for turbo :D
@bero74883 роки тому
nice model,what scale is?
@DanielHernandeztinkers3 роки тому
Incredible job!! looks very well done and the exhaust is beautiful👌👌👌 can't wait to see you run it, cheers! Quick question, where can I find some of those exhaust clamps? as I've seen Dennis use them on his build as well but I can't seem to source them.
@Blacklamass3 роки тому
I make them myself 👍🏻
@DanielHernandeztinkers3 роки тому
@@Blacklamass very nice mate!, would you be willing to sell a pair? if not, no worries!
@Blacklamass3 роки тому
I ran it today Dennis goes really well and so fast
@Blacklamass3 роки тому
@@DanielHernandeztinkers would be expensive
@sepul66672 роки тому
how did you make the hinges for the hood ?
@darrynnorris43683 роки тому
There is a yz250ep on ebay at the mo,worth a look as it seems to be in good order
@Blacklamass3 роки тому
Go for it easy to restore
@earlyculyer41033 роки тому
Why didn't you use a Dremel with thin circular blade?
@davidbyers81072 місяці тому
Can we here it ?
@mikeinvegas13 роки тому
What rc car is this engine put in? Im new to your channel. I just subscribed. I dont have the means to make custom parts. Can this be done with mostly parts i can purchase? I can bend pipe etc. But not 3d print stuff or lathe metal parts.
@Blacklamass3 роки тому
Hi Mike yes I think with a few basic tools it could be done, I think the Toyan clone I built with the single cylinder engine is very straightforward using the Traxxas revo gearbox, these engines come from either Enginediy or Stirling engines
@MygameMygame-je6eq3 роки тому
Hi. A need help with my rc helicopter Am a noob it keeps spinnig its not the tail is somthing from the midel. A can send pic. Thanks for the help
@chayraaininqulaibah6951Місяць тому
Real
@Blacklamass3 роки тому
Engine Model Compatible With 1: 10 1: 12 1: 14 RC Car Vehicle RC Truck RC Boat
@ironuniverse40902 роки тому
If I pay you can you build me one ?
@tjmiller78073 роки тому
Can you put a link on everything for your build ?
@Blacklamass3 роки тому
Enginediy or Stirlingengins
@Blacklamass3 роки тому
TOYAN FS-L200 Two Cylinder Four Stroke Nitro RC Engine Model For 1/10 1/12 1/14 RC Car Ship Model