Fans; High is next to Off on purpose

  Переглядів 4,198,832

Technology Connections

Technology Connections

4 роки тому

This video is absolutely fantastic.
Ever wonder why it goes Off-High-Medium-Low? Well, it has to do with motors and the ways we cheat with them.
Are you wondering what the heck a selection accumulator is? Well, it's the brain of an electromechanical jukebox!
• The Selection Accumula...
Do you have the rumblies that only links can satisfy?
Technology Connextras (the second channel that stuff goes on sometimes):
/ @technologyconnextras
Technology Connections on Twitter:
/ techconnectify
The TC Subreddit
/ technologyconnections
You can support this channel on Patreon! Thanks to contributions from viewers like you, Technology Connections can continue being as weird and unpredictable as it is. If you’d like to join the absolutely magnetic people who bring these videos to you, you can find out how at the link below. Thank you for your consideration!
/ technologyconnections
And thank you to the following patrons!
Vince Batchelor, Peter Sarossy, Tracy Cogsdill, Matt Allaire, Guy , Will Hayworth, Benjamin Gott, Zach Le, Sean Fyles-Duggan, Fredrik Østrem, Anil Dash, Simon Safar, Michael Wileczka, William Matthews, Fred Leckie, Kenneth Morenz, Andy , Adam Merolli, Bendegúz Gellén, Greg Stearns, Robert L LaBelle, Chris Satterfield (Compgeke), Jerrod Putman, Cameron Benton, Samuli Suomi, Keith McCready, Jeffrey Glover, Marcus Langendorff, Hsin-Kuei Chen, HenryD , David Anez, Josiah Keller, Conall Ó Maitiú, Struan Clark, Keeb , Alexander Karlsson, Tarrien , Jason Viterna, DrMoebyus , Chris Larsen, JH , Michael Romero, Aram Hăvărneanu, Jonathon Mah, Jonathan Polirer, Marc Versailles, Arthur Zalevsky, John Fruetel, Cupcake , Andrew Diamond, Cole Campbell, Christopher Beattie, Paul Bryan, Samuel Kirzner, Daniel Pritchard, Brandon Tomlinson, Eric Loewenthal, Jeremy Samuels, Malcolm Miles, Matthew Lloyd, David L Jones, Matthew Burket, Mike Burns, Noah Corwin, Andrew Roland, Luke Whiting, Smith8154 , Lars Jacobsen, David Groover, Michael Wehner, Kenneth Siewers Møller, jacob kamphaus, Slysdexia , Alex Hurley, D.z , Tommy McCarthy, Andrew Bobulsky, On Ice Perspectives, Brian Wright, TheGreatCO , Petteri Hjort, Daniel DeLage, Nathan Obuchowski, Sam Tran, Shaun Puzon, Bret Holmes, Vlycop , Lucas Beckmann, Casey Blackburn, Devon Hodgson, Zimpan , Loïc Esch, Filmmaker IQ, Jan Houben, Bren Ehnebuske, T.J. Zientek, Vernon , Ton Brands, Scott Wright, Kory Howard, rezonant , Thanasis Dimas, Marc Grondin, Hex , Craig Kollai, Daniel Barrera, Erkin Alp Güney, Mark Stradling, Peter Sodke, joseph , Kristian Scheibe, BigMcLargehuge510, Andrew Liendo, Nick , The Masterpiece, Seanvdv , Chris Cody, Jason Portwood, Chad Fertig, M Shrimptoast, Joseph Houghtaling, Ben Tucci, Dave Stares, Josh Braun, Joe Johnson, Daniel Dugger, Christopher Lowell, Oleg , Michael Sacchi, Ali Elam, Dan Allen, Trent Crawford, Zhenbang Xiao, Jason Watson, Markus Towara, Barky doggo, Ectra , Dylan Taylor, Martin , Reid Fishler, Daniel Meagher, Joel , Clemens , Bill Bates, Centronias , Dennis Walsh, Alex Warren, Paul Robins, CanyonMID , Les , Keenan Finucan, Ian Clanton-Thuon, Ryan Pratt, Paul Newton, Greg Golds, Theo Keeler, Tyler Alberico, Benjamin Ratner, Doug Davenport, Paul Sharp, Craig Brickey, Zidy , Justin Trout, Brandon , Karl Kornel, Danila Fediashchin, Adam , Zach Rose, Arvin Prasetya Wiranata, Patryk Majewski, Ryan Kamphuis, WB , AmbientCyan , Sam Calandra, Wolfgang Gschwendtner, Józef Sokołowski, Will Preston, Stuart Stanfield, Hammerchuckery , Christopher Olson, Kor Nielsen, Jacob Ford, Stephen Amar, Bryce , Andy Holzhammer, Ethan Mears, Jon Clegg, David Jeroslow, Ian Hills, Charles MacDonald, Andrew , Tim Jones, Crisco762 , Phil E, AnsulFolf , Roy Burns, Raymond Coutts, Ian Spence, John De Witt, Mike A, Alex Dodge, hipp1eguy , Justin Derleth, El Jefe, NEON725 , Emily Eisenberg, Mark Christian, Dylan Leblanc, Bard , Megan Lovett, LGR, Jeffrey Frasure, kn0tsin , Michael Gooden, David Wulff, Max , Fredrik Lindroth, Michael Riegel, Paul Kavanagh, finacious , Isaac Clarke, Sean Hearrell, Christopher Macdonald, Selectric , Xzandreth , Keithius , Sönke Schlüter, Julian Haldenby, Seb Bacanu, Mauricio , Hunter Thor, Austin C Borger, Gabe Cook, Anapan, S0N0S , Michael Patron, Sonic Ether, mike quick, Adam , Lucas , microserf , Daniel Kraut, André Gil da Costa, jacob topkok, Luka Sanzin, Peter Hillier, PeterH , William Holt, Ethan Hamel, Grant Campau, Else , Michael Dunn, Rin , Richard Hicks, Matthew Foulks, Levi Maaia, Mike Roach, Simon Janssen, Jorge Caballero, Kyle Messner, Matthew Schwartz, gs , ashka , Mr. Yan, Matthias Feist, RedR0ze , adan c, Thomas Fuchs, Alan Holland, Dan Boulden, Phiroze Dalal, Devin Rosenthal, Avalon Hamakei, Ray Hardman, G Cowell, Dan Coulson, Kevin Hamilton, Chase Tarson, Christopher D'Arpa, Marshall Kurtz, Matt Goldman, Hurf Durr, shaun morris, David Bell

КОМЕНТАРІ: 9 100
@TechnologyConnections
@TechnologyConnections 4 роки тому
Good gravy are there just so many motors out there. Like brushless DC motors which are absolutely cool in their own right! Therefore I just want to put up here that you should _definitely not_ go thinking that all motors work like this, because many don't! In fact, the universal motor? One of the reasons those are still so common despite their (relatively) shorter life is that they create *gobs* of starting torque on their own. An induction motor would be absolutely awful for something like a power tool with its poor starting torque, unless you went real fancy with a VFD and stuff. It's all about what's best for what purpose!
@CalvinWalton
@CalvinWalton 4 роки тому
I love the idea behind brushless dc motors, it's so ridiculous that we can build the things at all. Take what's essentially a multi-phase ac motor, and then have solid-state electronics switch between the phases. Fancier ones can even do things like detect the rotor position by measuring the effects of the (typically permanent magnet) rotor on the winding fields, and apply torque to hold the rotor in place.
@alicequinones1717
@alicequinones1717 4 роки тому
I don't know why I watch you but I do and I love it please keep doing what you're doing!!!
@Hansengineering
@Hansengineering 4 роки тому
Brushless "DC" motors are just AC motors with DC compatible power circuitry.
@perfumedmanatee6235
@perfumedmanatee6235 4 роки тому
It's all relativity's fault.
@dogwalker666
@dogwalker666 4 роки тому
The correct term for an AC variable speed drive is an "Inverter Drive" Telemecanique call them Altivar but that's a trade name. Brushless DC motors are in reality AC motors which are not new at all it's just the miniature Inverter drives that they are more popular. But still will never have as much low speed Torque as a DC motor. With DC you can have Full Torque at Zero speed, it is possible with ac using full flux vectoring however they are very complex and require the motor to have an encoder.
@ChatookaMusic
@ChatookaMusic 2 роки тому
I love how this guy's delivery makes him seem not quite unhinged, but maybe just dangling precariously from the last screw on the last hinge lmao
@Bacteriophagebs
@Bacteriophagebs 2 роки тому
Watch at 1.5x speed, it's even better.
@gagamaus
@gagamaus 2 роки тому
@@Bacteriophagebs 1.5 try 5x
@CreeperPookie
@CreeperPookie 2 роки тому
@@gagamaus What extension are you using?
@mareksicinski3726
@mareksicinski3726 2 роки тому
'unhinged'? Just a joking /playfuyl, very slight quirkiness
@shawnwitthoff471
@shawnwitthoff471 2 роки тому
Fans. It's what's for dinner.
@lauschner9669
@lauschner9669 4 роки тому
"It operates a lot like transformers but it is in fact a Decepticon" God I had to take a break after this one
@turtleguy123r3
@turtleguy123r3 4 роки тому
The spooky part about this comment is I started reading it right when he said it 😂
@chrisreynolds6331
@chrisreynolds6331 3 роки тому
When I was a child I had an old reel to reel tape recorder with that type of shaded pole induction motor, where the manufacturer has got clever and put secondary windings on it to drive the electronics so it was a transformer as well
@aykincakaloz
@aykincakaloz 3 роки тому
The deadpan delivery just makes it so much more
@cyanimation1605
@cyanimation1605 3 роки тому
That was about as inaccurate as anything a politician could say, or a republican.
@kodredcud
@kodredcud 3 роки тому
@@cyanimation1605 Republicans are politicians
@Antifrost
@Antifrost Рік тому
I never once asked this question before, but I was still willing to sit through a 16-minute video explaining it.
@MatthewTheWanderer
@MatthewTheWanderer 5 місяців тому
I actually HAVE wondered about this, lol.
@AgusB69420
@AgusB69420 5 місяців тому
I also have wondered about this for years!
@Gargoyle_911nn
@Gargoyle_911nn 5 місяців тому
I’ve wondered about this lol, this guy’s pretty good at making really engaging videos based on seemingly pointless shower thoughts
@splashmanej3
@splashmanej3 5 місяців тому
ive wondered since i was 5
@chaoticignorant483
@chaoticignorant483 4 місяці тому
I was not (willing to sit through this). Does he ever answer the question? 10 minutes in and I still don't know. And I guess I don't really care either so I ain't gonna finish the video.
@dyingbreed5386
@dyingbreed5386 9 місяців тому
TLDW: Initiating the spin requires more power than maintaining the rotation. This is why if you have a fan thats dying you can sometimes spin it by hand to get it started and it will run fine.
@buildingblocks51
@buildingblocks51 5 місяців тому
Thank you. This was the comment I was looking for
@bjmccann1
@bjmccann1 5 місяців тому
Thank you.
@anon38705
@anon38705 4 місяці тому
I love you bro
@moritzrossbroich
@moritzrossbroich 4 місяці тому
Thanks
@JM_Tushe
@JM_Tushe 4 місяці тому
Best summary of a 17 minutes video. Sweet.
@madjohnshaft
@madjohnshaft 3 роки тому
Mental note: When an evil Bond villain tries to chop you up by turning on an industrial fan, you should grab the blade before it starts turning.
@gabrielmalta1962
@gabrielmalta1962 3 роки тому
Mental note: When becoming an evil Bond villain make sure the electromagnetic field on my industrial fan makes enough torque to not be stopped by a MI6 agent's hand
@drunkengibberish1143
@drunkengibberish1143 3 роки тому
Gabriel Malta mental note: get strong enough to stop overclocked industrial fans.
@demomandemopan370
@demomandemopan370 3 роки тому
Mental note: if becoming an evil bond villan, electrify the fan blades on the industrial fan to stop people from grabbing it
@illeagle9560
@illeagle9560 3 роки тому
@@demomandemopan370 electricity makes things hard to let go of, I fried a cable box once so I know
@odysseyguyperson
@odysseyguyperson 3 роки тому
@@demomandemopan370 Mental note: bring scissors when i become an MI6 agent so i can cut the blades
@smartyman10
@smartyman10 4 роки тому
I always start like "why does he need 17 minutes to answer this simple question" and I always leave like "huh, that was a lot of information."
@dicksonZero
@dicksonZero 4 роки тому
and he is actively cutting the details down, so that it doesn't turn into a highschool physics class
@fallenhoenix1255
@fallenhoenix1255 4 роки тому
I saw this video in my feed and saw it was 17 minutes. At which point i took 10 seconds on Google which revealed that the motor could overheat otherwise. Now i have to go pee. Additional fun fact, I still spent less time the previous comment and this additional explanation than it would've taken me to watch this video. I mean, good on you if you want to know the detailed history of fan speed mechanisms or whatever this content creator is talking about... But i really gotta go pee.. priorities i guess.
@Mr.Chick3n
@Mr.Chick3n 4 роки тому
@@fallenhoenix1255 just so you know the actual video is about 6 mins long. It's repeating itself, probably a editing mistake.
@jek__
@jek__ 4 роки тому
There are no simple answers, only simple minds
@lesselp
@lesselp 4 роки тому
It used to be 25 minutes..17 is about right
@waynekeith6833
@waynekeith6833 9 місяців тому
I have an oldish fan (maybe 30 years old, so looks fairly modern compared to the real antique fans) with push button speed control. It very often fails to start on low. I discovered on my own that if I put it on high first, then switch it to low, it does fine, so that's what I normally do. I did assume the higher power was helping it get started, but I'm very glad (because I'm also a big nerd) to know the details of what is going on. As for why this particular fan can't start on low, I'm guessing it's higher bearing friction due to its age since it used to be able to start on low just fine.
@gooseknack
@gooseknack 5 місяців тому
It probably needs a clean up and regressing or fresh oil on felt(usually around the bush).. It depends on the design as to which it is. Most modern fans in Australia since the 90's, a light layer of grease does the trick after a dismantle and clean. (Don't robes the bushes unless they're designed to be easily removed, just clean them through!).
@TheTrueMr.Chicken
@TheTrueMr.Chicken Рік тому
I always thought it was a safety thing, since you're more likely to shut the thing off when it's going faster.
@ImAlwaysHere1
@ImAlwaysHere1 Рік тому
I figured it was for kids, since they like to do things like turn knobs, and they usually like to turn them to one extreme or the other. Instead of turning it to a more dangerous high speed, they would turn it to either off or low.
@grissee
@grissee Рік тому
I guessed the reason correctly, because my cheap fan stall a lot, I need to turn it with hand before it can turn on its own, just like old propeller plane, so I guessed it has something to do with torque and friction
@raspberryjam
@raspberryjam Рік тому
Yeah id always thought "oh like stoves that makes sense" but I never actually thought about it
@Scumful
@Scumful Рік тому
@@ImAlwaysHere1 what kind of logic is that dude?
@ImAlwaysHere1
@ImAlwaysHere1 Рік тому
@@Scumful The logic is that if a child turned the knob, it is likely they would turn the fan off or to a lower speed. The reason that might be important is that children also like to stick their fingers in fans. If the fan is off, the child would not get injured. If it is on low, the child's fingers are likely to get less damage, or possibly stop the slow moving fan blades and receive no damage. I thought the logic was pretty clear.
@polymetric2614
@polymetric2614 4 роки тому
"this is an antique so i don't want to take it apart" proceeds to stall the motor
@MacroAggressor
@MacroAggressor 3 роки тому
I swear I could hear it screaming like I was watching The Brave Little Toaster xD
@becauseimafan
@becauseimafan 3 роки тому
@@MacroAggressor OMG the brave little toaster! I can't unsee/unhear that now!! Oh jeez, whyyy, lol.
@RobertHeadley
@RobertHeadley 4 роки тому
I feel like this one episode generated an entire season of future episodes.
@krallja
@krallja 4 роки тому
Robert Headley But that’s a story for another time.
@MmeHyraelle
@MmeHyraelle 4 роки тому
Ac, heat exchanger, thermopumps... Hell yes!
@CrypticRite
@CrypticRite 4 роки тому
How do I get a crooked obtuse angle next to my name? Lol. I've seen them around.
@npne1253
@npne1253 4 роки тому
Missed chance to call it breezingly smooth jazz
@benruss4130
@benruss4130 4 роки тому
Yah, for example, he could talk about VFD's (variable frequency drives) and their uses and quirks. He could then go from VFD's to PWM (pulse width modulation) which is how most VFD's operate. The uses alone for PWM would be a whole series.
@IntaminFanboy
@IntaminFanboy Рік тому
“These look a lot like transformers, and indeed operate a lot like transformers, but they’re actually Decepticons.” That got me laughing a lot more than it should have.
@hus_10001
@hus_10001 Рік тому
Nerd
@Magicul
@Magicul Рік тому
Omg its the r/guessthecoaster guy (how tf did i find you here of all places)
@stevenkeeffe9137
@stevenkeeffe9137 Рік тому
I immediately thought: "but did you have to shoot the toaster?"
@MrKYT-gb8gs
@MrKYT-gb8gs Рік тому
Decepticons are transformers
@marauderdz
@marauderdz Рік тому
@@MrKYT-gb8gs Finally, an educated person
@coffeeisgood102
@coffeeisgood102 Рік тому
My Cold Spot fan sold in Sears in 1950 has no speed control and no switch. Just plug it in and it runs. Bought it at an antique shop years ago. Before using it I took the motor apart and did a thorough cleaning of the rotor & stator. Cleaned the air vent slots and the two bushings. Put it back together and used # 30 oil to lube the bushings. I recommend that you do the same to your antique fan. It will make your fan happy. If I lived in the same town as you I would do the work for free if you didn’t feel comfortable tackling the job yourself. I can’t afford to be a Patreon so it would be my way of giving back.
@peanutsans6780
@peanutsans6780 Рік тому
Aww
@TheSuperFanMan
@TheSuperFanMan 3 роки тому
As an avid fan collector, I’m thoroughly impressed with this video. The explanations are FANtastic. The off-high-medium-low sequence is the most commonly found on fans with rotary switches. But there’s plenty of fans with the increasing speed sequence. Also, that’s one fine 1930s Robbins & Myers 1304 table fan you got there :)
@pablorepetto2759
@pablorepetto2759 3 роки тому
May the algorithm look kindly upon this small offer of a like and a comment
@n.s.ac.i.ajointeffort1983
@n.s.ac.i.ajointeffort1983 3 роки тому
@@pablorepetto2759 shurely they shall
@dylconnaway9976
@dylconnaway9976 3 роки тому
@Ethan Stam Still more normal than people that like cats. Godless killing machines...
@Creepa99
@Creepa99 3 роки тому
@@dylconnaway9976 bruh cats are the best. They don't need to go outside, they don't smell bad, they aren't loud. Yeah they might be nosey but kids are too but cats don't cry. Dogs smell like ass all the time from going outside.
@netts2315
@netts2315 3 роки тому
@@Creepa99 Bruh there is no "best" animal, just preferences.
@Energyone
@Energyone 4 роки тому
"These look a lot like transformers, and indeed operate a lot like transformers but they're actually decepticons"
@fodebic5253
@fodebic5253 4 роки тому
Transformers + corona = ukposts.info/have/v-deo/pHOda39up6SYkWw.html
@Psychodegu
@Psychodegu 4 роки тому
Electric motors, more than meets the eye.
@dragons_red
@dragons_red 4 роки тому
Autobots
@johnathin0061892
@johnathin0061892 4 роки тому
@@Psychodegu That would have been a better line. But he still gets an E for effort
@faustin289
@faustin289 4 роки тому
Common, Decepticons are transformers too. Don't make Megatron angry, you'd regret it!
@adaharrisonn
@adaharrisonn Рік тому
TC, thank you so much for always having such good captions/subtitles on your videos. I hope you never forget how appreciated they are and how many people they are immensely useful to. It's hard to find effortful captions these days and content creators who are conscious of this need and feature on their videos and who consistently put in the time to making them well-written for their viewers. I am very grateful 🙏🏻
@bextomoose
@bextomoose 9 місяців тому
This is the third channel I know of that actively does that. I personally don't need the captions and rarely if ever use them, but I do appreciate them for those who do. I always think significantly higher of channels that do, it's a small but extremely helpful thing for a lot of people
@dp92492
@dp92492 7 місяців тому
I agree sometimes I like watching g his stuff while listening to music. Plus he writes scripts and uses a teleprompter which I'm sure makes it a bit easier for him to do this.
@pluspiping
@pluspiping Рік тому
"But that's a story for another time"
@Mark_Agamotto1313_Smith
@Mark_Agamotto1313_Smith 8 місяців тому
Indeed, Ask a question, Get answer, Answer raises three more questions, EACH answer raises three more questions, some times overlapping.
@morganhopkins204
@morganhopkins204 4 роки тому
This is the kind of OnlyFans content I'm interested in.
@Kaynstein
@Kaynstein 4 роки тому
This comment made my day. Thank you
@GyroCannon
@GyroCannon 4 роки тому
But he went on a few tangents on electric vehicles. This video was not only fans. :(
@jakeaurod
@jakeaurod 4 роки тому
The naked truth it is.
@mortache
@mortache 4 роки тому
How about listening to this while doing physical exercise with the Hub on another tab?
@wenisinchina
@wenisinchina 4 роки тому
underrated comment
@JotaC
@JotaC 3 роки тому
Me, looking at my fan: Why the hell are you so complicated? Fan: Brrrrrrrrrrrrrr
@lusian4758
@lusian4758 3 роки тому
Lol that one gave me a good chuckle
@mehpainter
@mehpainter 3 роки тому
Me during the day: NO DON’T STICK YOUR FINGERS IN THE FAN Me at night: Ha Ha fingers no Brrrrr
@HenryNWhite-zp5zp
@HenryNWhite-zp5zp 3 роки тому
Me looking at my fan: No one, literally no one: My echo coming back:
@lusian4758
@lusian4758 3 роки тому
@@HenryNWhite-zp5zp The “No one:” instantly makes the joke less funnier ngl
@Theo1
@Theo1 3 роки тому
I would like this comment, but it’s already at 669.
@mountiedm
@mountiedm Рік тому
"You can lose your mind trying to keep track of them all [electric motor types]." This has happened to me evidenced by my ebay purchases, graveyard of electronics hidden away in dark corners, and number of tabs opened to science papers. On a side note, I love how Firefox gives up counting your tabs somewhere north 80 and just changes to ♾️
@nolanturner5607
@nolanturner5607 Рік тому
Mobile Chrome stops at 99 and switches to a smiley face. Fun fact, I have 1500+ tabs opened in my phone's deep memory that constantly ungroup themselves whenever I reopen Chrome.
@kaitypittard646
@kaitypittard646 Рік тому
Bro just bookmark those 😂😂
@LittleDancerByGrace
@LittleDancerByGrace 10 місяців тому
Me and my 'ridiculous amount' (husband's words) of Chrome tabs thank you for making 40 tabs look completely rational.
@J4MJ4M5
@J4MJ4M5 10 місяців тому
I will never understand why ppl don't just bookmark all their extra tabs 😂 like I understand having multiple open but idk
@nikkiofthevalley
@nikkiofthevalley 9 місяців тому
​@@J4MJ4M5Good luck bookmarking 100+ things and remembering where they are.
@SpiritmanProductions
@SpiritmanProductions 2 роки тому
Before watching the video, I really thought the main reason for _1-2-3-OFF_ was to save the fan from inadvertently being left on. My reasoning was that if you're in a hurry (or just inattentive) and turn the knob towards 'OFF' before rushing out of the room, you'll immediately be aware that you didn't turn it all the way if it's now on '3' (or 'max'). But if '1' were next to 'OFF', you might think the fan's slowing down means it's about to stop as you walk away, when it'll actually be wasting electricity for all the hours you're away.
@kimkizzermacalam5723
@kimkizzermacalam5723 2 роки тому
You have a point.
@sindicta5757
@sindicta5757 2 роки тому
Have you noticed that it's like that on gas stoves? I still think the reason is safety, so you don't accidentally leave it on the tiniest flame and not notice.
@SpiritmanProductions
@SpiritmanProductions 2 роки тому
@@sindicta5757 Indeed 👍
@feathero3
@feathero3 2 роки тому
I never thought that before, but thats a good point and some solid thinking! As for gas stoves that do the same thing, it could be for safety, but now after watching the video I think it's so the flame has enough gas to ignite in the first place from being set to the "high" setting.
@brrrrrr
@brrrrrr 2 роки тому
@@sindicta5757 gas stoves need to be ignited much like a fan's motors need to be spun
@Demokirby
@Demokirby 4 роки тому
"This here is my biggest fan" Lies, I didn't find "ceiling fan" among your Patrons credits
@JakeValorOfArms
@JakeValorOfArms 4 роки тому
He's just blowing allot of hot air.
@mjc0961
@mjc0961 4 роки тому
Hey man, maybe ceiling fan lost his or her job due to COVID-19 and can't afford to support on Patreon right now. Don't judge. 😋
@Fuzy2K
@Fuzy2K 4 роки тому
You know I'm surprised, because that's *exactly* the kind of thing he'd do XD
@the_hanged_clown
@the_hanged_clown 4 роки тому
I'm sure a fan in a jet engine is larger than your average ceiling fan
@SkullkraneEntertainment
@SkullkraneEntertainment 4 роки тому
This deserves top comment
@PharaohOfTheDamned
@PharaohOfTheDamned Рік тому
"'Nearly all' is subjective, please don't write letters" is the most internet thing ever I'm loving content creators setting boundaries with fans
@johnlister
@johnlister 5 місяців тому
🤣🤣
@wrightclick
@wrightclick 3 місяці тому
In this case, he set boundaries about fans 🤗
@ColeRees
@ColeRees Рік тому
Wild, I work at an observatory and I’m trying to understand/redesign our single phase and 3 phase motors used on our dome, but had no idea what I was doing or anything about how they worked. Thankfully I had older engineers figuring out the important stuff, but I can’t believe your video about fans would be the connection I needed to figure out the part of a telescope system!
@addisonshinedown
@addisonshinedown 2 роки тому
The jokes in this episode are the peak of nerd humor. We will never surpass “I’ll tell you when you’re older.” “This is my biggest fan.” And “these are not transformers, they’re decepticons”
@volnartheunforgiving3952
@volnartheunforgiving3952 Рік тому
Decepticons ARE transformers though
@kazooduck
@kazooduck Рік тому
nerd humor, it's what's for dinner
@WFly101
@WFly101 Рік тому
@@kazooduck I'm not your biggest fan
@kazooduck
@kazooduck Рік тому
@@WFly101 large amounts of deception energy coming from this one
@relzyn5545
@relzyn5545 Рік тому
Decepticons are transformers though. I think he's a decepticon, with all the deception in that line
@NeverlandSystemZor
@NeverlandSystemZor 4 роки тому
Side note, I'd love to see a "Our US Electrical System is Weird- here's why" video.
@ValleysOfRain
@ValleysOfRain 4 роки тому
Ah, but that's a story for another time
@dmacpher
@dmacpher 4 роки тому
*starts new UKposts channel* still not enough to cover this topic
@mantis0427
@mantis0427 4 роки тому
Great Idea. TBH "why is Something in the US Stupid" could be a whole series!
@dmacpher
@dmacpher 4 роки тому
Mantis 04 pbs ?
@tomcarlson3913
@tomcarlson3913 4 роки тому
If you think it is weird now go back in time 50-90 years when there were pockets of DC, 25Hz and 50Hz grid in the country...Then consider the time before outlets were standardized where each room would only have a lamp or in some cases a lamp and a power receptacle that consisted of a lamp socket near the baseboard of the room with a little door to cover it when your electric fan or other device wasn't connected...
@DemonetisedZone
@DemonetisedZone Рік тому
I like this guy. He seems like a real person, by that i mean he isn't hiding his personality behind a facade Well done mate, keep doing it as is👍😉
@Abitibidoug
@Abitibidoug Рік тому
Interesting, I always wondered why high speed is the first setting. It all makes sense, I know how hot a stalled motor can get.
@Vexnatos
@Vexnatos 5 місяців тому
real; a stalled motor killed my last fan
@DeviantOllam
@DeviantOllam 4 роки тому
This video made your channel even cooler than it was before. How is this possible?? 🍃
@Gloworm17
@Gloworm17 4 роки тому
😏 I see what you did there...
@transfemtranshuman
@transfemtranshuman 4 роки тому
Hi deviant, big fan. Get it, fan?
@roberthunter5059
@roberthunter5059 4 роки тому
It's all of his fans.
@dysomniak
@dysomniak 4 роки тому
I'm blown away!
@Novers
@Novers 4 роки тому
Funny seeing you here
@chshrkt
@chshrkt 4 роки тому
I counted no fewer than three "stories for another time". Looks like you have lots of material for us for the foreseeable future. :)
@nerhu59
@nerhu59 4 роки тому
Three Stories, Three Phases, coincidence?
@harrylane4
@harrylane4 4 роки тому
@@nerhu59 technology connections cinematic universe
@AbeDillon
@AbeDillon 4 роки тому
He also promised to tell us about Fleming's rules and Lenses laws when we're older!
@AbeDillon
@AbeDillon 4 роки тому
@@nerhu59 three pyramids, three guidestones in Georgia, three licks to the center of a Tootsie pop! It's a sign!
@thereisnospace
@thereisnospace 4 роки тому
​@@nerhu59 When I see three stories, three phases, three videos. I do not see coincidence, I see providence. I see purpose. I believe it our fate to be here. It is our destiny. I believe this night holds for each and every one of us, the very meaning of our lives.
@joeyhemlock
@joeyhemlock 6 місяців тому
I've been working in factory automation for years, mostly in the higher-end servo field, but I started out in college working with single-phase induction motors. This is the best and clearest explanation I've ever heard. And I spent the first eight minutes of the video hoping you'd say "shaded pole" and then you did. It's the little things...
@MiGujack3
@MiGujack3 Рік тому
Stalling is still a thing on PC fans. When you bypass auto fan controls on modern motherboards (to allow fan stop) you need to measure manually how much duty cycle you need to start the fan again reliably. I have 3 exact fans models but each on of them starts at different %, so I end up taking the highest value. The reason for this is to activate the fans quietly when you need them, scale them to the desired temperature.
@ravinchowdhury5215
@ravinchowdhury5215 4 роки тому
As a physics major, "we'll talk about these laws when you get older" is hilarious.
@tracyh5751
@tracyh5751 4 роки тому
As someone with a physics degree, I felt the same. But also, get back to studying, you kid!
@timewave02012
@timewave02012 4 роки тому
EE degree and physics minor. Glad I found work in software/firmware and don't have to worry about motors anymore.
@Wertsir
@Wertsir 4 роки тому
If you’re still alive, you’re not old enough yet.
@ComradePhoenix
@ComradePhoenix 4 роки тому
My response to this comment is left as an exercise to the reader.
@DionSquire
@DionSquire 4 роки тому
Its weird explaing to people why there are 3 lines for long distance wiring. XD i told my physics teacher all this way back in 2006 and he kindly told me how wrong I was about for long distance wiring containing 3 wires osolating oddly.
@GeorgeCowsert
@GeorgeCowsert 4 роки тому
What I wanna know is why do ceiling fans have one useful setting, a useless setting, and a tornado mode that makes me wonder if my fan is gonna break off. Like, at least put something in between useful and tornado and get rid of useless.
@WeneDog0628
@WeneDog0628 4 роки тому
If the fan wobbles too much when on high it's unbalanced. Much like balancing the wheels on a car after installing tires, there's weights that can be applied to fix this.
@pouringblood
@pouringblood 3 роки тому
@@user-ez9id7td4b I don't have enough fans installed to raise the ceiling **ba-dum-tiss**
@ShellShock794
@ShellShock794 3 роки тому
I love the useless setting! It's designed to cycle the air around without a lot of air flow. My fan is on the 1 setting all winter to help circulate the hot air from the ceiling to the floor. Hot air rises so all the heat in your house just sits up at the ceiling and your floors stay cold. A ceiling fan will push that hot air down or pull that cold air up and helps keep the room more equally heated
@WgWilliams
@WgWilliams 3 роки тому
@@WeneDog0628 I used a penny to ballace a fan's blades once. I used double sided tape with a penny to find the balance point then super glued the penny in that spot on the top of the blade where it would not be seen...
@KochikameForever420
@KochikameForever420 3 роки тому
Lmao whenever I get too wasted, I always feel like my fan will fall and cut my head off
@MatthewTheWanderer
@MatthewTheWanderer 5 місяців тому
I can't sleep without a fan blowing full blast at my face! I'm glad the high setting is right next to off because I never use the medium and low settings. Fun fact: in South Korea, a lot of people are superstitious about fans and somehow think that fans blowing at night is dangerous because they think the fans steal your breath, lol.
@Luigi777888
@Luigi777888 9 місяців тому
I've been curious about this forever. I understand why old some dysfunctional fans I've had to deal with wouldn't get started until I physically spun the blades myself to get it started. Very interesting.
@Flashy7
@Flashy7 4 роки тому
"I am oversimplifying" - We all remember what happened when you weren't oversimplifying: RCA's CED :D
@jakeaurod
@jakeaurod 4 роки тому
OMG, I remember! They were the last youtube videos I watched the night before my cardiac arrest. Made for some interesting dreams while I was in a coma.
@no-lifenoah7861
@no-lifenoah7861 4 роки тому
@@jakeaurod that is unfortunate
@ancientflounder
@ancientflounder 4 роки тому
@@jakeaurod First off, I'm glad you came out of that coma; hope you are doing alright. But, I have to ask: how crazy are CED dreams?
@abstractrussian5562
@abstractrussian5562 4 роки тому
Help me find this video. I've watched this ukposts.info/have/v-deo/iJ6hjG6bb7CDqnU.html. It was okay.
@jakeaurod
@jakeaurod 4 роки тому
@@ancientflounder It's hard to explain, especially due to amnesia, which means my limited memory of watching the videos is divorced from any time cues. In other words, I remember watching it fuzzily, but upon waking I couldn't remember if it was hours, days, weeks, or months earlier. (It was 3 days) But what I do remember is like an alternate timeline where CED was a success, among other timelines I dreamed about. Then I woke and a short while later the Pandemic started, making me wonder if I died in one reality and woke up in another, as if I was choosing a reality from different programs on a videodisc. Even now, I feel kinda like I'm in the film Existenz, where at the end the guy is like, "Hey, tell me the truth. Are we still in the game?"
@samsungtelevision695
@samsungtelevision695 3 роки тому
The humor of this channel is subtle and grows on you after several weeks. I like a kid telling me he’ll teach me about Fleming’s rule “when I’m older”
@Darkn3ssF4ll
@Darkn3ssF4ll 2 роки тому
Was he referencing Ian?
@zekefleming1
@zekefleming1 2 роки тому
I’ll be waiting
@fatherofdragons4880
@fatherofdragons4880 2 роки тому
What the heck is Fleming's rule? Lol
@punzzle8213
@punzzle8213 2 роки тому
Right? I'm glad I'm not the only one.
@samsungtelevision695
@samsungtelevision695 2 роки тому
@@fatherofdragons4880 Fleming’s rule is an easy way to determine the relative orientations of electric and magnetic fields. en.wikipedia.org/wiki/Fleming%27s_right-hand_rule
@megabyte7047
@megabyte7047 Рік тому
I was looking at the controls for my ceiling fan and wondering the exact same thing. Nice to know there is a logical reason for the order. And also nice to know there is always someone willing to make a video to explain it!
@crazypete3759
@crazypete3759 Рік тому
I honestly love when you go off on a tangent! I also love the older "hand chopper" fans!
@victorfinberg8595
@victorfinberg8595 9 місяців тому
I have a master's degree in physics. I took one semester course in electric circuits. And yet, most of the information in this video is news to me. In particular, i never learned anything at all about 3-phase power in school. The amount of knowledge that humans have amassed is huge.
@sammoss1910
@sammoss1910 4 роки тому
Fan designer: "We must put High first for safety" Also fan designer: *Makes a spinny finger-muncher*
@Ciborium
@Ciborium 4 роки тому
Back in the day where if you stuck your finger into spinning blades and lost a finger, that's Darwin telling you it's your fault. Their motto: "Safety third!"
@Manofcube
@Manofcube 4 роки тому
The safety of their warranty department.
@ironcito1101
@ironcito1101 4 роки тому
My grandparents had one of those heavy, metal fans with barely any grill. They look worse than they are. The edge around the circumference is always protected, and if your hand approaches the blades from the front, it will most likely be pushed back due to the angle of the blades. It's only a problem if you come at it from behind, where the leading edge will hit you first. I wouldn't let a toddler near one, but for older children and adults, it's fine. You'd really have to _want_ to injure yourself with them.
@bottledpills
@bottledpills 4 роки тому
@@ironcito1101 well, pc fans are pretty much like that (because they're supposed to only be used internally, so without any finger-risk) but I've been able to cut myself 2 or 3 times while working on them when turned on :) (I couldn't shut them off because they were servers, and I didn't make any hardware change anyway)
@cheloniamydas6753
@cheloniamydas6753 4 роки тому
@@ironcito1101 Oh cool, I'm also a heavy metal fan!
@therizinosaurus214
@therizinosaurus214 4 роки тому
"but they're actually decepticons." caught me off guard and had me laughing.
@schmidtster101
@schmidtster101 4 роки тому
Gave me a good ol chuckle
@jacksong6226
@jacksong6226 4 роки тому
Me too
@TheCodeDaemon
@TheCodeDaemon 4 роки тому
Yeah that caught me off guard and made me snort laugh.
@Chode5evr
@Chode5evr 4 роки тому
Why
@outdateduser7036
@outdateduser7036 4 роки тому
My favorite part is that decepticons *are* transformers Deceptions and autobots are both factions of the transformers race
@catchthewind8563
@catchthewind8563 Рік тому
"This here is my biggest fan" 🤣🤣 Love the puns man!
@mizar892
@mizar892 Рік тому
I actually discovered a few of these concepts on my own, by accident, without realizing it. I sleep with a small fan blowing on my face, and when my last one started stalling out, (after running for several hours a day for 8+ years) I figured out that switching it to high would get it going and then change it back to low or medium.
@SantaFebuff
@SantaFebuff 4 роки тому
"We'll talk about Lenz law when you're older" Me, an electrician: "awwwhhhhh"
@ashen_dawn
@ashen_dawn 4 роки тому
We're a few minutes older, is it time to talk about that yet?
@SantaFebuff
@SantaFebuff 4 роки тому
@@ashen_dawn We must wait for our next connection to technology.
@Tinfoilpain
@Tinfoilpain 4 роки тому
I'm not an electrician and as a fellow 5 year old in a much older body, can you explain what it is. I don wanna waaaaaiiit.
@mrdumbfellow927
@mrdumbfellow927 4 роки тому
I look forward to learning about both the female reproduction system and Lenz law when I get older....... maybe I can find out where all my kids came from!
@marios1861
@marios1861 4 роки тому
@@Tinfoilpain according to my EMF class: nothing in nature wants to change, so it tries not to by counteracting change. Basically inertia but for everything in physics instead of just acceleration.
@SatoshiMatrix1
@SatoshiMatrix1 3 роки тому
"These look a lot like transformers and act a lot like transformers but they're actually Decepticons." This man is after my heart.
@JonO387
@JonO387 3 роки тому
Did your heart not know that decepticons are transformers also?
@Brindlebrother
@Brindlebrother 3 роки тому
@@JonO387 My pet looks and acts a lot like an animal, but he is actually a dog.
@insertname8811
@insertname8811 3 роки тому
Is it the all spark?
@supergeekjay
@supergeekjay 3 роки тому
How could you not give him your heart? Big friendly cuddly tech geek. Awwww :)
@JoeMuc2008
@JoeMuc2008 Рік тому
😅 I just wondered today, sitting between two rotary fans to survive the heat, how these speed selector switches work at all. Thought to myself that this topic might be worthwhile for Techonology Connections to cover... and of course, you did! Hats off, Sir, as usual your explanations are in-depth yet comprehensible. And I got a lot smarter again. Thumbs up!
@robertheinkel6225
@robertheinkel6225 9 місяців тому
While I was deployed to Greece, I bought a fan to help cool the room. When I returned stateside,I brought the fan back home. I changed out the electric plug to US type. Because the fan was designed for 50 hertz, I was now operating it on 60 hertz. The fan speed increased significantly, and eventually the plastic fan blades broke off.
@TheMaliciousOverlord
@TheMaliciousOverlord 4 роки тому
That Deceptacon joke got me completely off-guard, that'll teach me to drink water while watching UKposts.
@MetallicMutalisk
@MetallicMutalisk 4 роки тому
It didn't even make sense since Decepticons are still Transformers
@jasonblalock4429
@jasonblalock4429 4 роки тому
I'm always impressed by his ability to throw out gags like that without missing a beat. That's some Leslie Neilsen level deadpan.
@tounho
@tounho 4 роки тому
How many times did he have to record this line to not smile?
@roberthunter5059
@roberthunter5059 4 роки тому
@@pompshuffle562 if the Decepticons are fighting the Transformers, then who fights the Autobots?!
@retired1049
@retired1049 4 роки тому
@@MetallicMutalisk Check out the closed captions at the end of the video: "I've been informed Decepticons are still Transformers." "I apologize for making that joke with zero real knowledge of the Transformers franchise, but hey."
@miniman3112
@miniman3112 4 роки тому
"This here is my biggest fan" _sad viewer noises_
@6884
@6884 4 роки тому
I cackled
@KieranReed729
@KieranReed729 4 роки тому
I chukled
@john5311
@john5311 4 роки тому
i nutted
@Brindlebrother
@Brindlebrother 3 роки тому
I chortled
@edryba4867
@edryba4867 3 роки тому
I yawned.
@bellablue5285
@bellablue5285 Рік тому
This is a bit funny to see in my recs, spent many days in power lab configuring different motors (and transformers) for various lab tasks (and configuring a motor to behave like a generator by driving the slip), quite familiar with locked rotor current as a result. Nice video, and have to say it's nice to see something I learned in school after all this time
@bobbyfeet2240
@bobbyfeet2240 Рік тому
I've noticed very recent fan designs seem to no longer do this, but thank you. I've wondered this for years.
@simonmaher2240
@simonmaher2240 4 роки тому
"They look a lot like Transformers, but they're actually Decepticons." Well done XD
@SeanFerree
@SeanFerree 4 роки тому
Lol 😁😂
@Tom-ef1mz
@Tom-ef1mz 4 роки тому
Decepticons are transformers!!!! AHHHHHHHHH
@jamesdlin7
@jamesdlin7 4 роки тому
"They look a lot like Transformers but are actually Go-Bots" would have made more sense.
@mahedi98
@mahedi98 4 роки тому
Watch this
@joeyfatonefrombackstreetboys
@joeyfatonefrombackstreetboys 4 роки тому
@@jamesdlin7 Pretty sure he's playing on the word "Deceptive"
@enterpriset
@enterpriset 4 роки тому
"This here is my biggest fan" - I bet you thought that one would go _right over our heads_
@mjc0961
@mjc0961 4 роки тому
It is a ceiling fan, so it had better.
@benjaminmiddaugh2729
@benjaminmiddaugh2729 4 роки тому
It does make a nice Whooosh.
@Christopher-N
@Christopher-N 4 роки тому
Nice pun in reply to the pun. Well returned play.
@striker851
@striker851 4 роки тому
Actually, I was blown away
@BixbyConsequence
@BixbyConsequence 4 роки тому
@@Christopher-N I like how you put a positive spin on that.
@joshdowen640
@joshdowen640 10 місяців тому
Thanks from a long time fan, it feels like this video was made for me. I used an old fan from my grandparents which had a button to push down to select a speed and if you started at a low speed it sometimes stalled and you could see it sort of arcing or something to try to get it to go and it felt quite unsafe so I stopped using it. This video helps me understand why it behaved that way. They don't build 'em like they used to!
@JimCoder
@JimCoder 10 місяців тому
I watched this video long ago and it all makes sense. Just recently I remembered I have a box fan from the 1970s that has the settings OFF, HIGH, LOW, OFF. It's worked great over the years with just minor oiling. It's motor seems rather large. Just wanted to offer that counterexample.
@nelsonnicholson6175
@nelsonnicholson6175 4 роки тому
good video :)
@friendlyjapanesebusinesswoman
@friendlyjapanesebusinesswoman 4 роки тому
?
@mr.chekan
@mr.chekan 4 роки тому
FRIENDLY JAPANESE BUSINESSMAN r/woosh
@Tranman64
@Tranman64 4 роки тому
@@mr.chekan r/itswooooshwith4os
@ajearlywine4622
@ajearlywine4622 4 роки тому
FRIENDLY JAPANESE BUSINESSMAN he’s talking about fans, his biggest fan. Fans. Huh??
@EzeKry
@EzeKry 4 роки тому
Puns the punniest form of comedy
@batchynator
@batchynator 4 роки тому
I literally could not care less about this, that being said, I watched the entire video.
@DailyWireThirdStringer
@DailyWireThirdStringer 4 роки тому
I got lost about 3 minutes in. After that it was just me listening to him ramble and show some fancy diagrams. I really just don't get this stuff, and most likely never will 😅
@bobbabscoobydoo7115
@bobbabscoobydoo7115 3 роки тому
Well i actually hate this since fans are really irritating, j mean when you turn it on and its already its highest speed your like,welp....that was it,thats the max,see?no satisfaction
@JodyBruchon
@JodyBruchon 3 роки тому
Well maybe you don't, but I'm a fan.
@thatfloridakid
@thatfloridakid 3 роки тому
same -_-
@alexthompson8094
@alexthompson8094 3 роки тому
Welcome to Technology Connections, get used to it
@97marqedman
@97marqedman Рік тому
Well done. I thought you explained the simplified electrical intricacies very well. You have gained a new fan.
@Darquine
@Darquine 5 місяців тому
Ngl TC, You with Tech and NotJustBikes with Urban Planning have made me fascinated by what I previously assumed was the height of boring topics. Thank you! Awesome work!!
@KurosakiYukigo
@KurosakiYukigo 4 роки тому
"Fans: it's what's for dinner!" Mmm... dusty.
@cjmarsh504
@cjmarsh504 4 роки тому
😂😂😂😂 they do collect dust
@AttilaTheHun333333
@AttilaTheHun333333 4 роки тому
Can someone explain me this joke? I’m not a native speaker.
@EvilishDem0nic8732WhatItDo
@EvilishDem0nic8732WhatItDo 4 роки тому
Old 90s joke. BEEF, ITS WHATS FOR DINNER
@Lethgar_Smith
@Lethgar_Smith 4 роки тому
@@AttilaTheHun333333 "Beef. It's What's for Dinner" is an American advertising slogan and campaign aimed to promote the benefits of incorporating beef into a healthy diet. . It's just a silly reference.
@rahzlave8842
@rahzlave8842 4 роки тому
@@Lethgar_Smith thanks for the explanation. I'm not an american. That's why i don't understand the reference
@Orangutann1
@Orangutann1 3 роки тому
This is the first time ive heard someone be smart while referring to a rotor as a “spinning thingy”
@jacksonlarson6099
@jacksonlarson6099 3 роки тому
@Ken Hudson to this day we have to do something like that. I'm sure you've used a pull start lawnmower or weed whacker at some point, right? Just like the old wind up cars and biplanes, you're pulling a cord wrapped around the motor to get it spinning.
@AndyZach
@AndyZach 3 роки тому
@Ken Hudson I think Charles Kettering invented the self-starter for cars and made a bundle of money. In the teens or 20s I think.
@morg777
@morg777 3 роки тому
@@AndyZach Kettering made the first practical electric starter motor for cars in 1911 and Cadillac used them on their 1912 models. He was a cofounder of Dayton Engineering Laboratories Company, abbreviated as DELCO (later bought by General Motors and merged with their spark plug division AC Ignitions to become ACDELCO). Kettering was a very prolific designer, and had near 200 patents in everything from electrical designs to paint to diesel engines to cruise missiles (in 1918) .
@pyral514
@pyral514 8 місяців тому
I have a fridge fan that stoped turning last week. I replaced with a new one, but still didn't knew why the old one stopped working. Now your video is giving me a clue.
@Robert-xp4ii
@Robert-xp4ii Рік тому
I swear I was just thinking of researching this a day (maybe 2) ago. It made sense for the motor to build up speed to reduce strain on the motor but this explanation makes perfect sense.
@victorydance6439
@victorydance6439 3 роки тому
my fan goes from off, low, medium, high sorry ladies i'm already single
@shawnandrews8161
@shawnandrews8161 3 роки тому
Yuh I got 0, 1, 2, 3
@MysteryNotes
@MysteryNotes 3 роки тому
@Briny what the hell kinda fan do you have bruh
@Fan-pk9ml
@Fan-pk9ml 3 роки тому
@@MysteryNotes A fan with 26 buttons/switches
@Carewolf
@Carewolf 3 роки тому
Half my fans go: High - Off - Low, the other half Off - Low - Medium - High.
@ChoboUnjeon
@ChoboUnjeon 3 роки тому
my fan has 정지, 미풍, 약풍, 강풍
@adamkaris
@adamkaris 3 роки тому
"But they're actually decepticons." Said with a straight face XD
@speedy01247
@speedy01247 2 роки тому
Sad thing is decepticons are transformers.
@sethgilcrist8088
@sethgilcrist8088 2 роки тому
I died.
@TheHerrMan
@TheHerrMan 2 роки тому
I was like "did the viewer CATCH THAT?" That was genius! Artful!
@scohanl
@scohanl 10 місяців тому
Nice concept and episode -- it got me to take a double-take on some our 3 still in use Westinghouse fans (more than 100 years old) - and THEY start at low. They are a nice complement to our 99 year old house....and push massive amounts of air!
@willhenderson1973
@willhenderson1973 Місяць тому
idk why it took me so long to subscribe to you. your humor reminds me of the humor i used to sling at the lunch room table in middle school. thank you for all of the information and laughs. i hope you enjoy your time here on youtube as much as i enjoy your content
@fellipec
@fellipec 4 роки тому
"This looks a lot like transformers but are indeed decepticons" I had to pause the video to laugh
@ivanparas
@ivanparas 4 роки тому
I guffawed
@DrewLSsix
@DrewLSsix 4 роки тому
And I had to stop to write an angry " um well actually!" Comment about decepticons still being transformers.
@01001000010101000100
@01001000010101000100 4 роки тому
In old reel to reel tape recorders the motors WERE literary transformers. 2 in 1.
@moshadj
@moshadj 4 роки тому
I just laughed while watching. But you do you.
@TheAkashicTraveller
@TheAkashicTraveller 4 роки тому
TC: "Ever wonder why it goes Off-High-Medium-Low?" Me: Looks over at fan Fan: 0-1-2
@HomelessPank
@HomelessPank 4 роки тому
Capacitor start motor fan gang!
@Asu01
@Asu01 4 роки тому
Imagine having to set your fan high first only to set it low later. This post was made by electronically controlled brushless fan gang.
@laurinneff4304
@laurinneff4304 4 роки тому
-3
@rhodexa
@rhodexa 4 роки тому
@@Asu01 I have a pretty cheap fan laying around, its bearings are a bit sticky, so i have to set it to high just set it back to low. It just won't start by its own in the low setting :P Electronically drive brushless motors are one of my favorite devices, my precious ♥️ xD
@FCWW87
@FCWW87 Рік тому
What a great explanation of something I genuinely never considered. I feel smarter and as though I’ve wasted a bit of time. I love it!!
@dirkjensen935
@dirkjensen935 11 днів тому
I had wondered about this ever since I first saw an induction motor in physics class at high school and when I asked about how they wouldn't start I was just given a nothing answer, I had completely forgotten about it. As I learned more I had just assumed that they would use a capacitor to create a phase delay, and then never really thought about it again. I never knew about shade poles, such an ingenious if not MacGyver-esque solution. Great video man!
@denimchicken104
@denimchicken104 3 роки тому
<a href="#" class="seekto" data-time="369">6:09</a> “something like a fan which could be running for DAYS at a time...” Laughs nervously at the fan in my room that I turned on and forgot about years ago.
@Bacteriophagebs
@Bacteriophagebs 2 роки тому
1000+ days is still "days." Also, don't turn that fan off unless you want to buy a new one. A fan that's been running for that long will very often die if you turn it off and try to restart it. As we said of hard drives in I.T., "it's like patients in an old folks' home, you put them down to sleep and some just don't wake up."
@somethingelse9228
@somethingelse9228 2 роки тому
That's a really long time!
@victorhopper6774
@victorhopper6774 2 роки тому
i am high class cause i turn mine off every 4 years to clean it;)
@MonkeGeorge
@MonkeGeorge 2 роки тому
@@Bacteriophagebs And 1000 days is 8.64e+7 seconds, which is still "seconds" but that's not how we communicate timeframes, sir.
@avaccian629
@avaccian629 2 роки тому
Wtf that fan is probably the dustiest dirtiest garbage ass fan
@MichaelSteeves
@MichaelSteeves 4 роки тому
Interesting trivia: Electric fans were the first common household electrical appliance. Light bulbs were, of course, first, but this was the first common use of a motor.
@movax20h
@movax20h 4 роки тому
There is a bit of overlap with vacuum cleaner and washing machine, but in general due to the cost, electric fans were available earlier, around 1900-1909. The vacuum cleaners were available from around 1908 in mass. And washing machines from around 1915. There were available earlier (as early as 1904), but really only started being used widely around 1925-1928. All due to the cost of course. Same for hairdriers, they only kicked off around 1920.
@Norm475
@Norm475 4 роки тому
More interesting trivia Michael. One of the very first electrical appliances was an electric vibrator. This was used in doctor's offices to bring women to orgasm. Years ago women had a lot of sexual hangups and sexual frustration, doctors diagnosed this as hysteria so the women would come in and the doctor would masturbate her, obviously, this took considerable time on the doctor's part so the vibrator was developed. As they use to say "truth is stranger than ficton."
@vulekv93
@vulekv93 4 роки тому
Dildos were up there too. They were made before electric shavers.
@budgetcoinhunter
@budgetcoinhunter 4 роки тому
@@Norm475 Well, we all know new ideas are always turned to sex early on. The internet is for porn, after all.
@pootispiker2866
@pootispiker2866 4 роки тому
Imagine people surprise when some areas went from 25 cycles to 60
@MrChrisRP
@MrChrisRP 8 місяців тому
I very much appreciate your style and no-nonsense format. keep doing you as you do.
@12longz
@12longz Рік тому
I've been looking for a channel like this my whole life not sure how I am just finding it. Keep up the good work !
@Ag89q43G0HyA
@Ag89q43G0HyA 2 роки тому
I want a fan that can have a volume knob, to have "infinite" levels of speed, like a volume knob, it gives you more precision.
@tristan6509
@tristan6509 2 роки тому
It's called a Variac.
@hercules5813
@hercules5813 2 роки тому
I want a fan that goes up to 11.
@JohnDoe-ni9zm
@JohnDoe-ni9zm 2 роки тому
i want a van
@colefrankenhoff1428
@colefrankenhoff1428 2 роки тому
@@hercules5813 Why don’t you just make ten the top setting, and make that a little stronger?
@Lachlant1984
@Lachlant1984 2 роки тому
I think I once saw an exhaust fan over a spa bath that worked like that, this was years ago.
@MN_Engineer
@MN_Engineer 3 роки тому
Lol Electrical Engineer here. He's not even joking when he says he's simplifying things
@Straylight4299
@Straylight4299 3 роки тому
When i started to learn electronics i was like, cool, this so logical and easy to understand. At a certain point i gave up and went back to believing it's essentially all magic, infused with lots of maths and some occult quantum stuff sprinkled on top. It's better that way.
@immrnoidall
@immrnoidall 3 роки тому
i think he screwed up the "breaker box in your home" saying to use two 110 vac for 220 vac and you only get 208 vac .isn't all US homes usually 220-240 coming into box? being two separate 110 vac hot's? I had a 220 compressor and no 220 outlet.but had a 220 line changed to two separate 110 outlets for my washer and gas dryer. they took out the 220 breaker and installed two 110 [20 amp] breakers. I ALSO use these outlets for running high amp stuff outside with a ground fault extension cord. but I made a 220 adapter using those two hots for my compressor. it worked fine. until it did not. IT stalled and melted the motor. expensive mistake. MY biggest stupidity was ,those two hots ,were still going back to two separate breakers and i think only one tripped. so stupid . learned it from a youtube video. stupid.
@immrnoidall
@immrnoidall 3 роки тому
@Jestivius Jovial_Emperor so what is normally coming into a US. residential home, like for stove and dryer ? would i need a new line from the pole for 240? Now I'm really confused.
@daytonrd17
@daytonrd17 3 роки тому
I’m a electrical motor technician, I couldn’t agree with you more lol he never even dipped into electrical theory.
@TomCee53
@TomCee53 3 роки тому
immrnoidall you missed the line about it coming in as three phase. Because the phases are 120 degrees apart, the ac voltage between two of them is 208.
@bmar1784
@bmar1784 7 місяців тому
I work for a motor/VFD manufacturer and I appreciate the first part of the video. Well explained even if you say you oversimplified it
@DulfyBee
@DulfyBee 10 місяців тому
I watched this video about a year ago and found it quite interesting. I came back today because my stand fan just had a failed kickstart! (Relatively new fan, never happened before, fully plugged in.) Initially I set the switch to medium but it didn't start, turned it off and back on and it started going. Kinda cool to see it happen in-person!
@DoctorNemmo
@DoctorNemmo 4 роки тому
"We are talking about Flemming's rules and Lenz's Law when you are older" He's technically correct !
@BHanif1996
@BHanif1996 4 роки тому
Because time passes
@Archgeek0
@Archgeek0 4 роки тому
The best *kind* of correct!
@gophop
@gophop 4 роки тому
@SHAHMI ISKANDAR BIN SHAMSUL - he'll talk about it in the future. in the future you will be older.
@Z4RD4N34
@Z4RD4N34 4 роки тому
@@Archgeek0 Awwww. I wanted to say that.
@KherZhul
@KherZhul 3 роки тому
<a href="#" class="seekto" data-time="866">14:26</a> “This here is my biggest fan” Aww... what about your viewers?
@zlette
@zlette 3 роки тому
150 likes no replies?
@zlette
@zlette 3 роки тому
Also I hope he doesn't change..
@leavewe
@leavewe 3 роки тому
@@zlette doesn't change how
@jeremyroland5602
@jeremyroland5602 Рік тому
Bless you. I have been asking myself this exact question for 23 years.
@KDG860
@KDG860 3 місяці тому
I never thought of the stall condition be in the reason. I've always wondered why the high was first. Thanks for sharing your intelligence with me.
@victrosia
@victrosia 4 роки тому
you said “this is my biggest fan” like you have a collection of many different sized fans but you are especially proud of this one
@reshirman
@reshirman 4 роки тому
It could also be his only fan and he would still be right
@metaforth1271
@metaforth1271 3 роки тому
I wouldn't doubt that he does
@trailersic
@trailersic 4 роки тому
I'm glad to see Technology Connections isn't too big to dedicate an entire video to it's fans.
@BrowncoatInABox
@BrowncoatInABox 4 роки тому
Get out, but first here is a high five
@encycl07pedia-
@encycl07pedia- 4 роки тому
glad* its*
@emyoswald
@emyoswald 9 місяців тому
this helped me understand the difference in table saw motors! and also some of the noise differences.
@shreeveda
@shreeveda 10 місяців тому
Saw this today and have started pressing 3 at start instead of 1, and then press 1. Bingo. I understood the WHY today. Till now I was having my table fan stalled after a min or 3, on pressing 1 at start. (I would then press 2 or 3 and then 1, anyway). Thanks a lot. 👏👏👍
@WigglesNation
@WigglesNation 3 роки тому
I was in the navy, we called your civilian <a href="#" class="seekto" data-time="77">1:17</a> "stall condition" pole slippage. but we still refer to the normal operation of electric motors as "making it go all spinny" <a href="#" class="seekto" data-time="93">1:33</a>
@TheCharlie1701
@TheCharlie1701 3 роки тому
I work at a hardware store. The repair man there even says 'go all spinny'
@dylconnaway9976
@dylconnaway9976 3 роки тому
Similar to the “place on rock or something.”
@aaronbailey8050
@aaronbailey8050 3 роки тому
Navy guys always trying to get some pole slip action.
@thenexthobby
@thenexthobby 3 роки тому
and here I thought that the reason was because Hi is the only setting that’s worth a damn many times.
@DjAle1
@DjAle1 3 роки тому
Nice G-Shock
@Bacteriophagebs
@Bacteriophagebs 2 роки тому
The stand fans I bought after moving into my current house are stupidly powerful and we only ever run them on low. In addition, they have a separate on/off switch from the speed switch (the controls are digital, and they have remotes) and will power on in the same mode they were in when turned off--unless you unplug them, in which case they start on "high." Clearly they don't need to start on high to avoid stall, as the commutator takes care of that, but it's still the default start mode because, as he said in the video, "this is just how it is and we're all used to it by now so why bother changing it?"
@alessudot
@alessudot 2 роки тому
@@Bacteriophagebs the difference between efficiency of electrical output and also the electric motor has made it such that modern fans operate a lot better than ones in the past. odds are, it is kept as a mechanic to minimalise the probability of it not producing enough torque and eventually heating up the internal components, only to then melt the fuse and force it to be repaired.
@Bacteriophagebs
@Bacteriophagebs 2 роки тому
@@alessudot As I tried to say and phrased very poorly, I suspect that the electronic controls in the fan automatically apply max current on startup, like with power tools or the ceiling fan switches he discusses in the video. I said "commutator," but meant "commutator controller."
@MakieMisa
@MakieMisa Рік тому
Don't know why this was on my feed but definitely loved it. I'll never look at a fan the same again.
@mcardenas23
@mcardenas23 Рік тому
Thank for finally answering this! I always wondered why, but never enough for me to look it up.
@RetroGameSpacko
@RetroGameSpacko 4 роки тому
My initial thought : "This must be anothet weird US thing". After reading the comments : "Yep" I have never seen ANY device with speed/power settings that has a high setting next to off.
@vanhoe0
@vanhoe0 4 роки тому
Yup, can't relate to this.
@AaronSmart.online
@AaronSmart.online 4 роки тому
230V land here, can't say I've seen this either. Table/floor standing fans usually have push button controls, and ceiling fans aren't really a thing at all.
@matteocristini6221
@matteocristini6221 4 роки тому
@@AaronSmart.online italian here, can confirm
@unimor2781
@unimor2781 4 роки тому
I live in Europe and every gas stove I saw had Off, then High, then Low on the knobs. Probably similar reason - easier to light the flame when there's a lot of gas coming out.
@SeanBZA
@SeanBZA 4 роки тому
@@AaronSmart.online Ceiling fans are a definite must in the tropics and sub tropics ( so most of the EU, aside from those places around the Med, are out), and all of them I have met start off as high, medium and low. mostly because they tend to have bearing issues with time, and the bearings ( or bushings, depending on how old the fan is and who made it) will tend to become sticky with time, but so long as the fan is able to start turning they will run. Thus you start on high, to get the best chance of the bearing getting it's hydrodynamic film built up and thus reducing wear, as a slow moving bearing or bushing is going to have very high loss,, simply because of metal on metal contact. In general the fans only start to give issues when older, and often I cure it with a new capacitor, as most ceiling fans I meet are not shaded pole types, but split phase. Bearings getting stiff it is possible to lubricate them, but often the housings are pressed together, making it hard to get to them for a good repair, and the modern trend is to use that horrid CCA wire as well. The ones on my ceilings are around 20 years old, and still work well. The smaller fans almost all are split capacitor, though the old GE fan is rather odd, in that it achieved phase rotation by having variable reluctance in the pole pieces, using thinner sections of the poles to provide a saturating magnetic field. As the field saturates it appears to shift, allowing the fan to start as the field is moving, and not just varying with time, just like the shaded pole does, but without the need for the copper shorting coils to bring about the field saturation in the motor. higher starting torque simply because there is no circulating current in the pole pieces, so more energy available to induce a rotor current, plus the rotor is skewed, so there is a bias as to start direction built in. Yes 230VAC country, currently ( amazingly) 233.2 VAC , though it can go up to 247VAC at times, but after they replaced the 90 year old transformer across the park (it started leaking from the base valve, so went for repair instead of just a new valve) the newer one ( still around 30 years old, they are refurbished because of the cost of new ones) is set more closely to 230VAC instead of the old one being 240VAC. I lived in a place with the original 130 year old 250VAC supplies, and there cooking was great, but appliance and lamp life was not, though your lamps were extra bright. That will never change, as they would have to replace over 50 transformers at once, so keep the taps on the low side instead to meet spec for high voltage.
@thresh-
@thresh- 3 роки тому
"This here is my biggest fan" Can't tell if that was another pun or a statement
@AndyZach
@AndyZach 3 роки тому
Both.
@wendyleeconnelly2939
@wendyleeconnelly2939 3 роки тому
Yes
@ad-skyobsidion4267
@ad-skyobsidion4267 3 роки тому
Both both is good
@manjake
@manjake 3 роки тому
most assuredly
@monkeyvittles
@monkeyvittles 3 роки тому
I came into the comments specifically to see if someone said anything about that.
@fenderman6127
@fenderman6127 Рік тому
You know I just bought a tower fan and I wondered why even when it was set to low speed, it always started on high for the first second. Thanks Technology Connections for shedding light on a question I didn’t know I had
@augustinetoth8715
@augustinetoth8715 Рік тому
Literally the *same day* I watched this video (maybe yesterday since I've been binging) I noticed my fan actually stalling, and based on this I was able to get it started up!
@Daye04
@Daye04 3 роки тому
As an electrical engineer, I feel like you did a really good job of simplifying and explaining it for a layman 😄
@spect80r
@spect80r 2 роки тому
As a layman, I feel like I did a really good job of pretending to understand these concepts
@andreipaul968
@andreipaul968 2 роки тому
Shut up
@Daye04
@Daye04 2 роки тому
@@andreipaul968 what?
@avaccian629
@avaccian629 2 роки тому
Lol
@Daye04
@Daye04 2 роки тому
@A.J. Ello Uh huh. You donæt understand how relevance works, or?
@Comrade_Alpaca
@Comrade_Alpaca 4 роки тому
"Yes, I'm oversimplifying it." I understood 3 words of what he said.
@ATSaale
@ATSaale 3 роки тому
The terrifying part is there are 4 words in that sentence
@lifekillnevalives9504
@lifekillnevalives9504 3 роки тому
Yes I’m it
@erikwoole8436
@erikwoole8436 10 місяців тому
This has bothered me for a while, not enough to actually research it, but enough to notice it when I turn on my fan. I appreciate knowing now.
Introduction to Electromechanical Pinball Machines and Their Schematics
41:52
havepinwilltravel
Переглядів 69 тис.
Первая поломка Scirocco! Балацко попал на мотор.
1:13:12
одни дома // EVA mash @TweetvilleCartoon
01:00
EVA mash
Переглядів 4,7 млн
Why it's not possible to synchronize turn signals (but also absolutely is)
37:16
Technology Connections
Переглядів 2,6 млн
Why do hurricane lanterns look like that?
31:46
Technology Connections
Переглядів 4,7 млн
This goofy fridge has a really clever design. It's also kinda terrible.
1:03:33
Technology Connections
Переглядів 2,8 млн
This TV gadget censors bad words with 1980's tech
24:27
Technology Connections
Переглядів 2,1 млн
We should use this amazing mechanism that's inside a grasshopper leg
19:19
How does an Oscillating Fan work?
7:00
Jared Owen
Переглядів 5 млн
Holey Plugs, Batman! But... what are they for?
20:32
Technology Connections
Переглядів 5 млн
A troubling trend in lighting?
30:03
Technology Connections
Переглядів 1,8 млн
The US electrical system is not 120V
24:26
Technology Connections
Переглядів 2,6 млн
План хакера 🤯 #shorts #фильмы
0:59
BruuHub
Переглядів 1 млн
HUAWEI БЕЗ GOOGLE: ЕСТЬ ЛИ ЖИЗНЬ? | РАЗБОР
11:49
Що покаже Apple, гнучкі айфони та Windows переходить на ARM
17:49
Ноталка Шелягіна
Переглядів 61 тис.