Testing the CHEAPEST Tools from Wish.com
Переглядів 4,828,280
Рік томуThanks to Factor75 for sponsoring today's video. Use code DONUT120 to get $120 off Factor at bit.ly/3PYCP7m
HERE IN MY GARAGE…
Curious what we use in the shop on a daily basis? Check it out below. And if you purchase these tools from these links, you’re helping support Donut. We appreciate it!
Milwaukee Electric Tools 2550-20 M12 Rivet Tool (Bare Tool) www.amazon.com/gp/product/B07...
Milwaukee - 48-22-0125G - 25 ft. Magnetic Tape Measure - 2-Pack
www.amazon.com/gp/product/B08...
Milwaukee 48-59-1880 M18 REDLITHIUM HIGH OUTPUT XC 8 Ah Lithium-Ion Battery and M18 /M12 Charger Kit
www.amazon.com/gp/product/B07...
Milwaukee Angle Grinding 2781-22 M18 Fuel 4-1/2"/5" Slide, Kit
www.amazon.com/gp/product/B00...
Milwaukee 2735-20 18V Li-Ion Flashlight
www.amazon.com/Milwaukee-2735...
Milwaukee 2557-20 M12 Fuel 3/8" Ratchet
www.amazon.com/gp/product/B07...
Milwaukee 48-11-1880 M18 REDLITHIUM HIGH OUTPUT 18v 8.0 Ah Lithium-Ion Battery Pack
www.amazon.com/gp/product/B07...
Milwaukee 2125-21XC M12 LED Underhood Light Kit
www.amazon.com/gp/product/B07...
Milwaukee M18 FUEL 3/8" Compact Impact Wrench with Friction Ring
www.amazon.com/Milwaukee-Comp...
Adenna Dark Light 9 mil Nitrile Powder Free Exam Gloves (Black), Large - Box of 100 (DLG676)
www.amazon.com/Adenna-Light-N...
Scott Shop Towels Original (75143), Blue, 55 Sheets / Standard Roll, 30 Rolls / Case (10 Bundles of 3 Rolls), 1,650 Towels / Case
www.amazon.com/Scott-Original...
Zep Cherry Bomb Industrial Pumice Hand Cleaner - 48 Ounce (Case of 4) ZUCBHC48CA
www.amazon.com/Zep-Cherry-Cle...
AIDEA Microfiber Cleaning Cloths-100PK
www.amazon.com/AIDEA-Microfib...
Barrow 52 in. Brown Large Rectangle Wood Coffee Table with Lift Top
homedepot.sjv.io/c/2095194/45...
Barrow 52 in. Brown Large Rectangle Wood Coffee Table with Lift Top
homedepot.sjv.io/c/2095194/45...
New to the Channel?
►Watch this: • POPULAR DONUT VIDEOS
We upload almost every day, subscribe so you don't miss out!
►Subscribe here: bit.ly/1JQ3qvO
Click here for more info on joining the Donut Underground!
► / @donut
Shop Donut Merch:
►www.donut.media/
Donut Media is at the center of digital media for the next generation of automotive and motorsports enthusiasts. We are drivers, drifters, and car enthusiasts who love to tell stories.
@spddracer Рік тому
The $10 impact, and 192 pc tool kit would be perfect for a kids present. Inexpensive but useful enough that a kid could learn, and you wouldn't be out much if something broke.
@Cheepchipsable Рік тому
No, your kid would start to disassemble things at home. Very unlikely a kid would preak a socket set or screwdriver. An impact, maybe by dropping it.
@xuavrice2338 Рік тому
@@Cheepchipsable Maybe if your child is under the age of 5.
@thundercricket4634 Рік тому
That idea would have terrified my parents. I took things apart all the time. No kitchen appliance was safe.
@DECIFERTHIS09 Рік тому
“Dale I said no power tools” haha
@Kryynism Рік тому
I just give my son my old tools I don't use anymore
@SteveCozz Рік тому
Ever since I watched the torque wrench test, I’m always scared for the eyeballs of the Donut Staff when I see a new testing video
@zhershey65 Рік тому
All about them safety squintz fam
@aaront4494 Рік тому
Ha
@yutub561 Рік тому
They really need some better safety precautions for these tests
@kingofallworlds Рік тому
They need OSHA in their lives
@blvdes Рік тому
@@zhershey65 facts
@nordicberserk 9 місяців тому
For the orbital sander, I suspect it IS a Bosch sander. The factory just "accidentally" made an extra batch of them, without the branding, and sold them to a company that slapped their own brand on them, and threw them at Wish.
@auntie_Slayer 8 місяців тому
Sweet deal if so.
@blankityblankblank2321 7 місяців тому
That is 100% what happened. They do this all the time.
@1MajorTom 7 місяців тому
it IS a Bosch sander 😉 and the funniest thing is that they are made at Bosch😅
@paulwalked5810 5 місяців тому
Might be factory defects, quality control failures they strip the brands from as well
@MrKoyama2004 3 місяці тому
@@paulwalked5810 I think more likely a "third shift" product.
@mlbest7000 Рік тому
For plasma cutters, if you disconnect the air while the machine is on, some machines make you restart it. And often times, if the consumables on the torch head aren't tight enough, the machine will also not work until you tighten them and restart the machine.
@HerecomestheCalavera 3 місяці тому
Yeah it sucks they really didn't make much of an effort to see if it really worked.
@eliwhitley1878 2 місяці тому
Didn't even skim the destructions
@RobertDickens2002 17 днів тому
Then they wouldn't be able to say it sucked the jack worked fine and they threw it in the trash.
@jamesl14jamesl14 7 днів тому
I would not trust that jack 😅😂
@RobertDickens2002 7 днів тому
@jamesl14jamesl14 it's for changing a flat not a transmission
@imperfectly-balanced8861 Рік тому
About 6 years ago I bought an air powered die grinder off wish for $15usd, it came with a dozen different bits, different size chucks etc. I thought it'd be worth a laugh but no, it's worked flawlessly up until this very day! It gets used multiple times a week and I'm still amazed at how damn good it is. Wish is full of crap but once in awhile, that crap is accidentally great 😅
@sonorangaming4450 Рік тому
I have bought a few things from wish for my kayaks, and camping. They work well. Bought a cheap skeg for my swifty to help it track, and it works. I also bought some nice metal guy line tensioners my tent, and they work great.
@vinno97 Рік тому
I bought a "250GB" USB stick for just a couple bucks. It had a fake memory chip and it's actual size was 32GB, but it's the biggest and fastest stick I've owned and was actually great value
@allio3459 Рік тому
everything is made in China even the expensive tools. so i would say cheap tools will work fine. i dont know what donut media is smoking...
@Cheepchipsable Рік тому
@@allio3459 Yeah, that jack seemed good for people that might have some mobility issues or older people. Even to use those cans of tyre sealer to. I've seen a lug nut remover that you put over the wheels, but you could carry an impact gun, though those repair kits in a can are quite good and easy to use. Cheap tools are best when you just want to use something once or twice and will probably not use it again in 5 years.
@allio3459 Рік тому
@@Cheepchipsable exactly. If cheap tools will last for 5 years or more with good care and under $50… that’s a good fucking deal.
@Spoticor Рік тому
I was gifted the 198pcs tool kit from one of my friends after I moved away from home to join the navy, and I have to say, while some of the pieces' handles have fallen off and I have to shove them back on, it has been great to have. I've used it to replace radios, door locks, window motors, and wheels along with other small maintenance around the house. It may feel cheap, but I've put a beating on those and they've lasted over 4 years now
@MrTehNoms Рік тому
I love how the first they do after opening it is trying to break shit hahah
@DjDolHaus86 Рік тому
Yeah you can't go too far wrong with cheap hand tools and you don't feel anywhere near as bad if you lose them
@vinno97 Рік тому
For many people, it's better to have a lot of specific tools than to have a few high quality tools! My 10 buck ratchet screwdriver broke within 1 ikea bed, but now I have 30-some screwdriver bits that are surprisingly good if you're not driving anything into walls
@theepicricemaker6611 Рік тому
Well for the price that's DAMN good
@1pcfred Рік тому
For a set of house tools it's fine. Most folks have a claw hammer and a couple screwdrivers and that's it. That's all in a box in the closet with a broom handle as the tool box handle.
@DanakarEndeel Рік тому
Shame you guys didn't open the plasma cutter to see what was inside. Considering this came from Wish I wouldn't be surprised if the only thing in the box was a case-fan, some wires for the light in the switch and a brick that was glued on the bottom to make it feel heavy. 😅 Also, you have to check the shipping costs as that's where these companies make their money. Like they charge you $30 plus $90 in shipping while they pay next to nothing to ship via bulk container (which is why it usually takes 2-3 months for stuff to arrive).
@adrianishtar0 11 місяців тому
A brick of what tho?
@DanakarEndeel 11 місяців тому
@@adrianishtar0 Unfortunately just a regular brick most likely.
@Fetidaf 11 місяців тому
@@adrianishtar0 or coke… who’s to say, really
@PHEARVII 10 місяців тому
China can ship products for nearly free due to the United postal union act hence how wish can offer free shipping on every product.
@mromutt 9 місяців тому
Yeah it was a bit annoying they didnt say the shipping because thats part of the cost, and just like you said they put a super low price but then make the shipping something insane to equal the real price.
@AaronSkone Рік тому
Jerry and Jobe are honestly my favorite duo at Donut. One's a professional mechanic and the other is a mechanical engineer and their combination of science and experience, plus their personalities make them my favorite to watch.
@oronq2010 Рік тому
An engineer? And doesnt know that there isn't a drop of hydraulic fluid in that thing. Hydraulic pump???
@raphprev7312 Рік тому
@@oronq2010 jerrys the engineer
@Kevin-dt9xm Рік тому
@@oronq2010 1: jobes the mechanic, jerrys the engineer 2: it was a brain fart, he mispoke, he corrected himself.
@rickdlt Рік тому
Yea mine too. Their chemistry is entertaining lol
@prezidenttrump5171 Рік тому
They don't have personalities.
@nickantom.4099 Рік тому
Zach saying "Jobe!" while shooting stuff in the trash is a great example of why I love this guy 😅
@packersgoat4749 Рік тому
Kinda disrespectful to a legend
@kanedaku Рік тому
@@packersgoat4749 No its not. What a silly thing to say.
@braelee. Рік тому
@@packersgoat4749 literally how
@RedXCal Рік тому
@@packersgoat4749 its respecting his talent, which is why people say Kobe when dunking stuff?
@TheMidnightNarwhal Рік тому
Why say Jobe instead of Kobe
@AlbinoFuzWolf Рік тому
I could see the $10 impact being decent for like a RC car/boat hobby, also realllly wish they took the case off the plasma cutter to see if it was faulty or just a full blown scam.
@quillmaurer6563 Рік тому
Perhaps, feels a bit big for that. I think it would be good for light-duty work, not the high-torque stuff you'd want a good impact for, but as a convenient tool to use instead of a manual socket. I have a similar (supposedly) plasma cutter (is blue rather than red, but looks similar and has "CUT 50" written on it) and it does work. Not all that powerful, but that's because if I turn the power up too high it pops the breaker, not it's fault. With a higher-current or 220 outlet it would probably be awesome. Really wish they'd given this stuff more a chance, I feel like they were prejudiced by the price. Maybe they should have tested the stuff before hearing the price, not after. They should change the order of this, instead of look at, guess price, hear price, test, decide to keep or trash, they should look at, test (thoroughly with real expectations), guess price, hear price, decide if is worth that price or not.
@zachsheffee8458 Рік тому
@@quillmaurer6563 Maybe even test it against the brand name one!!
@jdrevenge Рік тому
What on earth would you be using an impact for on an RC car or boat?
@darthrevan611 Рік тому
@@jdrevenge 1/5th scale rc cars we use impacts on the wheel nuts and sometimes need one to break loose some of the bolts.
@Alpine642 Рік тому
@@darthrevan611 I’d use a 1/4 ratchet lol
@Benjyman31 Рік тому
I'd love to see them make an entire mechanic starter kit using exclusively wish tools. Either set a budget or have a competition to see who can do it cheapest. Like impacts, hand tools, sockets, organizers, tool box, everything. Close to everything that a C or B level tech would need to get through the week. That'd be fun to see who can get the most functional, and diverse tool collection this way.
@prestonsears1184 Рік тому
Good idea!!
@megladon6 Рік тому
The one whose tools function for the lowest price get the point. So tools that are so cheap that they don’t work would lose you the round. Kind of like price is right but for cheap tools.
@tsherwoodrzero Рік тому
@@megladon6 Maybe do it like a classic Top Gear Challenge? For $1500 or so, someone buys their first car and has to use the change leftover from the purchase price for tools to learn routine maintenance.
@danielevans6578 Рік тому
This is a fantastic idea. They already stole the magnet "best of" board from Top Gear. Why not the challenge structure too 🤣🤷♂️
@danielevans6578 Рік тому
No, but really. This sounds like a great idea and would watch HOURS of them doing stuff like that from them.
@motarted1735 Рік тому
The plasma cutter definitely needed more investigation, it would have probably been an easy fix. I have the exact same one only I paid 120 for it and it cuts great
@futuregamer5791 Рік тому
I was just saying the same thing and then looked at the comments and seen your comment. They should investigate. They can probably do a whole episode just on that plasma cutter.
@VOID_WARRANTY Рік тому
I bet styropyro can make a 1 MW pulse laser with it.
@CDCI3 11 місяців тому
I need to know what was wrong with it. Like, was it just a valve needed opened somewhere? Need. More.
@MW-zy4no 11 місяців тому
@@CDCI3 Same here, my mind is just stuck there now why it didnt worked? i would have spend hours on it before I come to a conclusion that its dead. Should have tweaked it a lil more for our satisfaction lol
@CDCI3 11 місяців тому
@@MW-zy4no Right? They were seeing 0 PSI? In my mind, I think it has to be one of two things: 1. The regulator and the gauge are separated (by a valve?) and there is pressure built up somewhere. 2. There's a massive leak before the gauge.
@Speckadactyl Рік тому
The wobble on that impact is a design feature, if you read all the literature you’d see Wish incorporated a u joint to help access all those tough to reach nuts and bolts
@brucedaboss3132 Рік тому
They really thought about the consumer on this one!!!
@TotalyKill Рік тому
@@rickrolled3666 Finally!!!
@Sheridantank Рік тому
It also would be plenty good for taking wheels off once you break them loose. A lot of people use breaker bars and lug wrenches. For the price I could imagine using it only for that. I wouldn't use it to take things loose for longevity.
@TrashcanRaidingPossum Рік тому
@@rickrolled3666 Trash
@TrashcanRaidingPossum Рік тому
@Caroline Hot 💋🌹 Trash bot
@MaxSpeedMike Рік тому
Build quality/durability is one thing when it comes to cheaper tools, but safety is the biggest issue.
@Neishy4AGTE Рік тому
Nah
@RecklessRobby Рік тому
Shutup nerd
@emptycoffin Рік тому
Zzzz
@INMATEofARKHAM Рік тому
Well, yeah. If you can't afford expensive tools you likely can't afford the lawyer for when you cheap tool maims you.
@loganwork7024 Рік тому
Never had a problem with my harbor freight tools, use the jack every day, but i wouldnt trust tools that are cheaper than the materials should have been
@timkern462 Рік тому
The $10 impact wrench is listed now for $91.
@peterparker9214 Рік тому
Of course it is they had to raise the price after Donut media gave them this glowing review!! 😂😂😂
@Anonymous..VQ3.5Lg35 Рік тому
Lmao great buy still clearly 😂
@travkeyes Рік тому
the tool kit is 40$ now as well
@drummajorgirl Рік тому
Donut tax
@Aliyah_666 Рік тому
@brent randall What does biden have to do with this....i swear he's gonna live rent free in all his haters heads. You say his name like it has relevance..😂
@willowashe 8 місяців тому
My dad got me a tool set like the one in this video (but smaller) when I was a kid and started to get interested in tools and cars. We were renovating our house at the time and I felt so grown up to be able to bring my own toolset out to do the little jobs I could help out with. When he knew I was responsible and wasn’t going to lose or break anything, he let me use the good stuff. I kept the toolset in my closet for years, it was convenient to have to hand for any quick jobs in the house without going out to the garage/truck. They aren’t great, but they have their place at times.
@littlejohn-pi7kk Рік тому
The $10 impact would be good to use to put wheel nuts back on. It won’t over torque. Then you can go over with torque wrench if you want to.
@sirbrokenlegs2074 Рік тому
That's what i was gonna say. At our shop we do just the thing, use the small impact to secure the wheels to the hub somewhat, if you weren't brave enough to do a few quick zips with the full-sized air impact, lower the car then torque 'em. I love using that Makita DTW251z, a quality tool that works like a charm. And then to have that 10$ thing do just that, yea i'd actually buy it. If something's got big torque, i'll break it loose with the breaker bar, and use that cheap piece of shit to do the rest aside from torquing them down. Of course i'm not gonna expect it to last for years, but i'm sure i'll get at least some of my money worth out of that thing. People buy a lot more useless things for even more expensive than 10$.
@texasslingleadsomtingwong8751 Рік тому
So , what we need to do is give this to the coconut who changes oil .
@quillmaurer6563 Рік тому
I'd find it useful for a lot of things. Not heavy duty stuff I'd use a real impact wrench for, but light-duty stuff you'd use a regular socket for. I'd personally use it a lot. I have a corded impact wrench, which is quite useful but a bit of a hassle to drag the cord out for it, so if only doing light-duty stuff I'll typically stick with a socket set. This could make such work go a lot faster, a convenient but not capable tool.
@sirbrokenlegs2074 Рік тому
@@texasslingleadsomtingwong8751 If you see someone actually use an impact just to deal with the filter and the drain plug, you know to look somewhere else. Like plenty of times it's fine to use an impact on plenty of suspension and a few engine parts. But nobody would be dumb enough to use them on spark plugs, drain plugs, internals' or cylinder head's bolts.
@texasslingleadsomtingwong8751 Рік тому
@@sirbrokenlegs2074 I've had my fair share of way over tightened oil drain plugs , enough to make me think the guy in the bunker has a five foot cheater or a very quiet impact , lol
@membranoid Рік тому
The air diaphragm is likely screwed in place for shipping like my soldering station's heat gun, look at the bottom for the bolt that needs removed.
@ZTenski Рік тому
Exactly. Didn't read the instructions. It'd be pretty hard to make a bad plasma cutter, there's not that much to them.
@chopshopchopper Рік тому
I would never buy yhis thing. But if i somehow receved it for free I would take the time to see if I could get it working...
@dswmetals02 Рік тому
Yeah obviously the airline is plugged somewhere so it's probably literally a 20 second fix like pulling a stopper or a plug or a screw out
@CraZY.pRIME. Рік тому
That was probably the missing plug for the valve, you take it out from one spot and put it there.
@HerecomestheCalavera 3 місяці тому
Yeah it is really annoying that they made no attempt to try and get it to work. Almost like they wanted it to fail.
@hlt3339 7 місяців тому
The quality of cheapest tools in your country are better than the quality of high priced tools in my country 😂
@dalionsouled Рік тому
I have the electric jack and for those of us with bad backs its a life saver. I've never regretted buying it and it fits in the trunk of my grand prix just fine
@WHATDATTOOLDO Рік тому
You can get a nice hydraulic one with a long handle that will last forever for 150$ ish bucks at harbor freight...
@dalionsouled Рік тому
@@WHATDATTOOLDO Long handle jack isn't so convenient for lugging around in the trunk
@jbarzee0001 Рік тому
The impact wrench is indeed $10, but they left out the fact that the “shipping” is $90.
@NonBinaryBisexualAdhdAgender Рік тому
Yep. Or you could pay more for cheaper shipping. The same item at 90 dollars would only charge 11 dollars shipping. Lol, but sadly true
@dchawk81 Рік тому
Or that it didn't include batteries.
@TomsShedProjects Рік тому
Nope
@Scortcorder Рік тому
Big round of applause for Jimmy everyone!
@SpaceMissile Рік тому
@@rickrolled3666 fuckin' robot account - why aren't you banned yet?
@roguesample Рік тому
Dude needs to tie his shoes! OSHA is coming for you DONUT! 😮🤣
@greecoboost Рік тому
Jimmy....your shoes, bro....ugh...
@ovni2295 10 місяців тому
My experience with these sorts of products is that they DO work, but they have almost no durability. Need it once? You're fine. Need it a hundred times? Maybe get your tools from somewhere else. EDIT: Also, sometimes the factories in China produce name brand tools, then produce the *exact same tool* for another brand. All they do is change the stencil and box. That's probably why that sander they used was comparable to the Bosch sander they showed - it IS the Bosch sander, just with a different name.
@shawtybae5854 Рік тому
13:26 I HAD A HEART ATTACK
@yiorgosroumeliotis6461 Рік тому
I would love to see donut make a crossover episode between the wish tools series and the car giveaway series where the contestants would need to fix the cars with cheap and terrible tools...
@Heratiki Рік тому
High/Low Tools Edition
@theepicgaming5260 Рік тому
@Deto Qcney just make them wear weld PPE
@nightkidnick Рік тому
I think they failed to realize that wish sellers don’t actually sell those items that low. They make the price low but then they add a lot in shipping, so while the tool set was $10, they most likely charged a lot more in shipping, making the actual price a lot more.
@jbarzee0001 Рік тому
Exactly! Shipping on the wrench is $90 and shipping on the plasma cutter is over $200
@NonBinaryBisexualAdhdAgender Рік тому
Yep. Or its for a sold out colour, toy version, some size of item that noone would ever use, or just an accessory. You need to click buy and add to your cart to actually see what you would get or what you would pay. Same goes for eBay and aliexpress usually
@gutturf Рік тому
@@jbarzee0001 That impact wrench for a total of $100 totally changes the proposition. I _wish_ they had mentioned the total price.
@noobsimdriver Рік тому
The shipping issue is new. It goes up and down daily.
@jbarzee0001 Рік тому
@@noobsimdriver it is not a new issue. Ordering from China has always been that way. It started on eBay over 20 years ago because you only paid fees based on sales prices now including shipping.
@Banks231 Рік тому
I have a similar impact wrench, compatible with Makita battery. with right battery, it can easily break ~120Nm wheel nuts
@ScarabChris Рік тому
I was surprised by the electric scissor jack. I wouldn't trust it to lift the entire rear end of my Escalade but to lift one wheel at a time....I think yes. Also when doing oil changes just to get a little extra ground clearance to access the oil pan and filter. I think I may look into one....but a better quality one. Honestly I didn't even know these existed. I guess I'm old school....I roll out the hydraulic floor jack for everything. LOL.
@SuperWooba Рік тому
Jeremiah totally dug that electric jack out of the trash after filming was wrapped lol
@jort93z Рік тому
You guys should have included shipping in the price. Sometimes they charge 5€ shipping, sometimes 50€ shipping. Actual shipping from china is around 50 cents, depending on the weight(for the plasma cutter maybe USD5). They get cheaper rates because they are still considered a developing country.
@maxheadroom22and26 Рік тому
Prices should ALWAYS include shipping! You can buy running shoes for 15$ and pay another 10$ for shipping. But you also can buy the shoes for 20$ including shipping. One of the many reasons to hate Wish.
@Haywood-Jablomie Рік тому
Wish prices are totally bull crap ... All those items are averaging $35 shipping to Canada. lol
@angieemm Рік тому
Yeah, and all that slave labor from prisoners and 5-year olds doesn't hurt the price point, either. Screw all of it. At least you can take stuff back to Harbor Freight almost indefinitely when it breaks and it probably comes from the same factories.
@jort93z Рік тому
@@maxheadroom22and26 No, i don't think they should. Usually a site doesn't know where you live, so they can't display the cost of shipping to you. But it should say "excluding shipping", or something like that.
@dclarkgmail Рік тому
I was yelling at the TV the whole time. Shipping costs, (especially for the super low priced items) make up for the "bargain" prices.
@darkhillseuropeanmountsLLC Рік тому
I would have loved to see the plasma cutter working
@SuperJamster1 2 місяці тому
Yup, I had the electric jack years ago. I used it to as a outboard motor lift, on my boat.
@josephsalter828 Рік тому
The “Jobe” swish threw me so much I genuinely laughed way more than I should! You two just work together so well!
@c.shannon3914 Рік тому
I like how it looks like you're spooning at 6:36. Very sweet. Plus Jeremiah is dreamy 😂😂
@ItsNuxFury Рік тому
They're both dreamy. Uh oh, I sense a lemony fanfiction developing somewhere. 😬
@c.shannon3914 Рік тому
@@ItsNuxFury yeah they are, but in that case Jeremiah was the little spoon. Lol
@vitanecro4955 11 місяців тому
Been binge-watching this channel since It came unto my feed, and as simple and petty as it is I love that they use Milwaukee tools.
@AustinDouglas75 6 місяців тому
3:23 The battery gotta be at 25% now 😂😂
@genem7234 Рік тому
I've had that exact electric scissor jack (thought from Amazon) for over a year now and I love it actually, yeah it is bulky it takes up less space then a regular floor jack if you travel, just have to remember to grease the threaded shaft from time to time!
@Cheepchipsable Рік тому
Seems very useful for older people.
@ckelley87 Рік тому
Yeah, I thought this was a miss - your car probably already has a manual scissor jack or something near a spare tire (or space for a spare) so it wouldn’t take up much room at all, maybe just get rid of the hard case.
@isaiahjohnson2532 Рік тому
I would totally take that jack. You guys at donut can send it to me!!!
@alexbuchanan2605 Рік тому
I have two! Great for lifting a car in a tight garage where you can’t get leverage on a longer jack bar. A bit slow, but faster than a traditional manual jack of the same type. Love them!
@rhyswilliams4893 Рік тому
It takes up as much space as the jack kit you get with the car. Nothing worse than twisting up a manual scissor jack on rough asphalt
@ShawnsTrains265 Рік тому
Kinda feel bad saying I have that yellow electric jack, but it works great and super convenient especially when you get a flat in the city. Fits with my tire kit great in my trunk. Keep it with me all the time. Love it. Recommend it.
@ShawnsTrains265 Рік тому
@koiun dwrru I've used it a hard dozen times. It's been very consistent and handles my car just fine.
@kevinfrey1435 Рік тому
I thought it was weird that they trashed it after proving it works much better than they expected.
@ohshucks7156 Рік тому
It's faster than a regular jack
@charlestimmons604 Рік тому
I wouldn't trust it enough to roll under a car unless I braced it with the harbor freight jack stands I got from a pawn shop but I could see it being pretty handy
@tau12usr85 Рік тому
@@charlestimmons604 you wouldn't need to get under the car to change a tire, and if your doing car repairs you always should use jack stands and tire blocks.
@KyuubiNaruto41 9 місяців тому
I have the tool kit bought it off Amazon awhile ago because my other tool kit was in disrepair. Haven't had problems with the set other than the thing you pointed out when first opening it, yes the sockets do frequently fall out.
@michaelcleary7065 Рік тому
Ive been using a couple tack life tools for about 5 years now. Surprisingly reliable for bargin bin tools
@timkenda8203 Рік тому
The "Jobe" when shooting the battery in the trash really caught me off guard lol
@MitchMcLean Рік тому
but it was gold
@FitmentIndustries Рік тому
Hey, for a cheap sander that was pretty alright! -Edgar
@colton4805 Рік тому
Okee dokee
@shadypalmtree2989 Рік тому
I wouldn't be surprised if it was an unbranded Bosch. Like how companies will sell models to more well known companies and they'll just slap a name on it.
@robertmyles9124 Рік тому
@@shadypalmtree2989 It's very common in grocery retail. Having worked in grocery for over a decade, it's become pretty easy to tell which products are rebranded brand names. For example; most grocery chain's store/private brand 24 pack drinking water is actually Deer Park water. It comes from the same exact bottling plants, on the same exact bottling lines, using the exact same water. The line doesn't even stop to change labels. Each bottling run let's say a thousand Deer Park branded bottles are filled, directly followed by a thousand Kroger branded bottles, then Walmart etc etc.
@barge7619 Рік тому
@@shadypalmtree2989 I doubt it is a Bosch. Don't be fooled by the color. Tack Life is owned by Aukey. Tack Life/Aukey used to sell these on Amazon, until they got caught using a paid reviewer service to place fake positive reviews for their Tack Life products. At the time they were selling them on Amazon, you could find about a half a dozen of the identical same sander being marketed under different "brand names", each with a different color. This is the same identical sander being sold at Harborfreight under their Bauer name, which are Red. If anything, these are just re-badged Harbor Freight tools.
@jesseharvey9067 Рік тому
Built the whole steering setup for a racing mower with about a dozen 12mm Sidchrome ring end spanners I flogged from work many years ago. Could never throw a tool away, but then again, my shed is full to the brim with odds and ends.
@davidkatze2921 Рік тому
I can vouch for tack-life actually making some pretty decent power tools.
@mattstarnes2006 Рік тому
$10 "impact" I'd gladly break it loose by hand and zip everything out. I got all Dewalt stuff now but back when $250 was alot of money to me I would of loved that thing
@Cheepchipsable Рік тому
Seems like it's best function. Still for $10 what would you expect.
@Animallover233 Рік тому
Seems like what it is, just a stronger ratchet
@quillmaurer6563 Рік тому
Agree - not suitable for "heavy duty" stuff like a good impact, but a very convenient light-duty tool. Not a replacement for your Milwaukee impact, but - at times - a faster alternative to a ratchet. I'd totally use that if they gave it to me, I have a corded impact I use sometimes but the cord is too much bother in some cases so I just use a ratchet - this thing would be great from a convenience perspective.
@CodeR3d911 Рік тому
I actually have that same jack, got it from Amazon though. It's fantastic to take on car trips for emergencies. It beats bringing the manual pump or using the factory installed jack. We actually used it on our aluminum car trailer and it did the job well. So I would recommend it honestly. But, since you threw it away, I'll gladly recycle that for ya.
@jtunedproductions4818 Рік тому
Exactly, they acting like they really enjoy using the og jack over pressing a button
@quillmaurer6563 Рік тому
I figure it wouldn't make sense to carry with you due to bulk/weight, but would be a nice thing in the shop.
@jtunedproductions4818 Рік тому
@@quillmaurer6563 the factory jack takes up almost as much space. I bet you it will fit where that one goes.
@stakman78 Рік тому
New favourite channel.! Keep up the good work mate from New Zealand.
@aylinsmine6309 Рік тому
I just love these videos, even tho i sometimes have 0 clue what im watching they are still entertaining 😭😭
@giga9293 Рік тому
Love when you guys pump out content keep up the work!
@TrillMurray Рік тому
5:40 I think "2 ton/3 ton" is just a funky way of writing 2/3 ton
@EZ-D-FIANT Рік тому
That electric jack, I've got a bolt welded sideways across a socket and use my impactor still or whatever on scissor jacks to do the same thing but super easy and cheap.....
@aaronong5146 Рік тому
TNice tutorials tutorial was so easy to understand. Thank you so much!
@LorandHungary Рік тому
My only issue with this kind of series is that shipping cost isn't included. Since it doesn't matter if something is 1$ , is shipping costs 100$.
@Outwardpd Рік тому
Shipping is complicated because sometimes they'll offer free shipping and sometimes the shipping costs are negligible with a large enough order
@tiloalo Рік тому
@@Outwardpd no it's not the issue. Here the seller lie on the price by making the object 10$ and the shipping 200$. The plasma cutter for example is clearly not worth just 30$, but it's just a trick used by seller to get a better ranking.
@loganries7066 Рік тому
Usually on wish the shipping is actually a good price, usually less than 5$
@james-hb5tu Рік тому
@@loganries7066 The shipping on the impact was $90
@TheNiteinjail Рік тому
The $10 impact wrench could be the basis of a ton of d.i.y. projects tho :)
@PaletoB Рік тому
Like a electric scissor jack 😉
@jeremiahhendricks1850 Рік тому
Or a tool for kids
@davidroberson1962 Рік тому
I'd use the $10 impact to take bolts out when disassembling something. I have a dewalt impact drill that I use currently. I'm sure that would work in it's place. What does it weigh?
@FUNKER420 Рік тому
No. No it wouldn’t. It would break remember u pay for what u get
@marcokrauss5320 Рік тому
I actually bought the Tec Life Sander for a project where I had to sand off very, very dirty wood for multiple hours non stop and I did not want to use my Bosch sander for it. Surprisingly, one year later, that sander still works perfectly fine 🤷🏻♂️
@zymeon Рік тому
open the plasma cutter case up, see if it's just a fan and weights or if they actually tried making something that works.
@trail-wolf4x4 Рік тому
I think the Plasma Cutter deserves a second chance!
@Loebane Рік тому
Same - I'd totally watch a video of them trying to get it working.
@1pcfred Рік тому
I'd love to see what's inside the case. I think it was just a factory reject. Those things are nigh on impossible to fix when they croak. They weren't designed with repair in mind.
@superhawk20002 Рік тому
There are internal air adjustments. I had the cut50 and upgraded to the 220V version. And have been using it for about 7 yrs. They are a little temperamental, but with a little practice (and patience), they've cut everything I've thrown at them.
@stevejenkins9984 Рік тому
These are my favorite of the series
@JunkTardis Рік тому
I can vouch for Tacklife products. I bought a 12v air compressor from them for my car that is tiny and tucks in a cubby. It's worked flawlessly every time, and feels quality.
@siddharthiyer1120 Рік тому
Mad respect to the editors, really make the humor work!
@thcenterprisellc112 Рік тому
I think you send the plasma cutter to AVE for an in-depth tear down ,great video
@1pcfred Рік тому
There's a guy here with a channel called DiodeGoneWild and he knows his electronics. He'd either get it working or figure out exactly why it can't work. But he's in Czechoslovakia. So shipping it to him may be hard. Mostly he just reviews crappy USB chargers though.
@stephengoad3091 11 місяців тому
I got three of those impacts although I paid more forms I might be. And it's true they don't do a very good job on taking lug. It put a quarter inch drive bit holder on it, and you can build several decks and use it for household projects. Also those batteries you can use on the light duty Makita tools.
@MadDragon75 Рік тому
That jack.. I discovered that one of the spindle nut sockets I bought for my 94 Accord happens to fit over the square where you are told to put the jack handle through for the twist of pain method. My 18v Wal-Mart drill I keep next to the jack does all the labor for me besides breaking the lug nuts loose and the final torque at the end.
@rosenevil74 Рік тому
I bought a discount tire inflator once. The second I turned it on it started smoking.
@muaazmasood1101 Рік тому
Well. You got a cool ass smoke machine then for your car.
@shannacollins4741 Рік тому
Ive got one of those that is so fire! Lol uhh yeah mine started smoking right away also even tho they aint same brand probably but yeah cheap air inflator = smoke!
@zachc1297 Рік тому
I bought one of the electric jacks from Harbor Freight after the Ford one bent changing a tire on crap ground. It actually worked for what I bought it for, only to change a tire on roadside issue. I think it was $50.
@RedFox3226 Рік тому
Rag in the oil pan reminded me of the engine we were trying to start. Tried everything and finally removed the intake manifold and found a grease rag inside.
@bigrichard660 Рік тому
They have since increased the price of the 198pc tool set and the cheapest is $39. The Impact in the beginning is now $23. The jack is still $70. The Orbital Sander is orange now, but cheaper at $15. HOLY MOLY the plasma cutter has gone UP to the cheapest being at like $270 PLUS...
@randombuilds8336 Рік тому
The jack would be good for someone older or disabled. Combined with an impact and some people would be able to change a tire when they normally couldn't.
@chickenpotpie79 Рік тому
But if they’re old or disabled how they got change the tire after its up lol
@randombuilds8336 Рік тому
@@chickenpotpie79 impact or torque multiplier to do the lug nuts, lots of elderly or disabled can move a wheel, but don't have the hand strength to run a jack or lug wrench.
@kirkmorris9761 Рік тому
Thanks Jimmy for your hard work and dedication to the Donut team!
@jacobdantonio8833 Рік тому
I bought a little brake bleeder off wish and I've been using it for years now. I love that little thing. (I work in automotive so I use it a lot)
@robsmithracing Рік тому
The power Jack would be useful for supporting an engine block whilst changing mounts or something or like he said for a trailer or caravan.
@andrewbrinkworth1420 Рік тому
This has definitely become my favourite show from donut the chemistry is on point and it's genuinely unpredictable every episode, and to me that's what makes the best episodes... Keep up the awesome work.
@REDW1NG94 Рік тому
The tack life stuff isn't too bad. When I went to aviation maintenance school, several of my classmates had tack life welding helmets, and they worked great and were surprisingly tough
@edgarorelldd Рік тому
These two are my favorite from the channel
@ShawnC.W-King Рік тому
5:34 Some Lil Jon sounding Outrage
@mr.waffles8739 Рік тому
Honestly I'm tempted to buy that orbital sander, on very very rare occasions I think, hmm I wish I had an orbital for this instead of my palm sander so this might fit the bill for me
@AnhH88 Рік тому
You better off buying a used one on Fb marketplace. I had a 20 bucks black and decker and it lasts forever.
@patty578 Рік тому
I turned on a drill from wish. It started a time loop that I can’t get out. I’ve been living this same day over and over again for 15 years now.
@GilgameshEthics Рік тому
hmm
@adamkolm6711 Рік тому
I have had a few impacts over the years a CP , Mac , Cornwell , Ingersoll Rand , millwakee, and a 3/8 drive Mac. I just bought the Milwaukee I'm impressed with it. It's my first cordless. I bought a Dewalt sander it's ok. I started restoring some of my antique furniture then I lost all interest in life 😕. I have happened to use other people's cheap tool sets helping them in a pinch lol. Not the greatest they can still get the job done. I have never owned a plasma cutter. I did purchase a cheap arc welder and I welded a half inch steel hydraulic bracket for one of my cat excavators it held up well lol.
@Booze_Rooster Рік тому
A buddy of mine got the plasma cutter. It worked on super thin sheet metal for a good hour before all the tips disentegrated.
@SWISS-1337 Рік тому
"we got the biggest toll in the shop, Jeremiah!" Jeremiah, waves and smiles whilst the camera is on him, then his smile contort slightly before the shot ends, rage un-containable. Plotting his revenge.
@jacobwcrosby Рік тому
They left out all of the shipping costs. Shipping is often more than the item itself! Pisses me off how they misrepresent wish as cheap, when it absolutely is not.
@andrew_koala2974 Рік тому
Buying US made products from outside of the US is simply uneconomical - with shipping costs far exceeding the cost of the product and often four or more times higher. The CCP subsidizes shipping out of CHINA and have contracts with a number of Airlines - FedEX- DHL and SINGAPORE AIRLINES --- Yet not one US president is smart enough or interested enough to promote US made products and provide subsidized shipping - instead it spends money on warfare and paying for mercenaries and home-grown terrorists to cause trouble in other countries. While US jobs are disappearing - minimum wage is much lower than in Australia - homelessness is increasing - tax payer funded heath-care is non-existent and the health system is pathetic- The US is going down the toilette fast and is managed by a bunch of incompetent clowns that have no idea what is happening in the country. To earn any money the uniformed dogs rob people by the roadside. The US is in desperate need of therapy.
@theglitch99 Рік тому
At 1st I was ready to jump on wish and get a plasma cutter until it became a paper weight! The electric jack was kewl. I use the impact to turn the bolt on the jack and then the lugs.
@larspokkussande 4 місяці тому
The plasma cutter need the regulator/wather separator to work. I have almost the same type cutter, and its two lines who go in on the back side of the machine. Thats what the third hole on the regulator is for. Then you can regulate the pressure on the front of the machine and it will work perfect
@jorgecolmenares1550 Рік тому
Break open the plasma cutter to see what's up. I'm just curious now. I remember Mighty Car Mods bought a "chip" and found it the chip had no data to actually do anything but light the little LED light to "signal" it was on. It was just a simple closed loop circuit 😄.
@TheBryBry420 Рік тому
Best part of the video is when Zach shot the battery and yelled. JOBE!!! 😂😂😂
@bogdanarsene9602 Рік тому
I've got a belt sander from tack life that's been through hell and a 12-in miter saw that's taking a beating constantly they behave amazing
@manjelos Рік тому
I got a angle grinder back in nineties, did use it mostly for sanding, still works today, did cost 15$
@putoutmyfirewithgasoline1877 Рік тому
That shot at 6:38 🤣🤣🤣 Man I love y’all. Donut is legit like a second family to me. I know we could meet and get along immediately
@matthewfowler5214 Рік тому
My man’s said “Jobe-y”. He’s a true legend
@captaindelta43 Рік тому
This testing things from different sources is by far one of my best donut media series ever . Love them trying and reviewing these stuffs for our knowledge and entertainment.
@Cheepchipsable Рік тому
Problem with the "reviews" is that they are just showing their bias and lack of imagination. Most of the stuff worked fine, but sure you wouldn't use it every day in a workshop...which is why it was so cheap.
@backwoodsplayer86 Рік тому
I got the same plasma cutter from Amazon same brand I been using this for 2-3 years now without issues the regulator supposed to b mounted to the back of the plasma cutter with a elbow that goes to the gauge on the front
@goodcitizen3780 Рік тому
6:20 Too funny. Never saw you guys before but I like the show. Thank you
@fintrenery2439 Рік тому
the thing is, we have a lot of burner tools like theses at work (crap tools u dont care to trash) stuff like undertrays ect the impact would be good as u wont de-thread them and the junk tool box would be great to have when u need to hammer stuff, i may actual buy that impact would be usefull when i dont want to break things
@Lil96millie Рік тому
I'd use that electric impact for 1/4in sockets and use it just for small bolts
@computernerdinside Рік тому
For a lot of these tools, listening to the sound they make, it sounds like they just don’t have any grease inside the bits where they should have grease. That means they will strain a bit more, make unhealthy noises, and probably not last very long. That said, if you were to take it apart and add grease, you might get something a little more decent. Especially with that scissor jack and maybe the impact?
@ExperienceKevsworld Рік тому
As a DIY'er with around the house projects, I might get something as cheap as possible to do a one time job. Example is a $25 1/2 inch hammer drill to install two hose bibs. I had to drill four 1-15/16" holes, two for each hose bib in my brick wall. The drill melted down at the very end (and was slow), but I got the job done. I know that shipping is a problem, or I would say for you to go ahead and send that jack to me.
@pleappleappleap Рік тому
I *totally* would take that impact wrench. Would do great in an emergency.
@akarne7668 Рік тому
I couldn’t find one for 10$ feel like they faked the prices or something because I found none of those items, realistically they’re great for thag price
@bdeoleveira8110 Рік тому
Annoyed me that they called in a impact driver and not a impact wrench
@SpaceAgeConsulting Рік тому
I've bought a few different Tacklife items off of Amazon and have liked them all. Had some over 2 years without a dip in performance. Good product at a very good price.
@LukasBulevicius Рік тому
Guys please make more of these videos :) with love from Lithuania 🇱🇹
@3232myke Рік тому
Funny thing I Have that impact gun it works great actually, takes off wheel no problem
Євробачення Україна | Eurovision Ukraine official
Переглядів 193 тис.
Антон Сошников
Переглядів 4,2 млн
РИХТОВКА313
Переглядів 2,3 млн
CM_Spinner
Переглядів 40 млн