The world's largest lathe in operation
Переглядів 872,013
2 роки томуThe world's largest lathe in operation
****************************************
We hope you enjoy the interesting Videos of Global Technology TV! Don't forget to sign up! Thanks very much!
* We hope you enjoyed this review!
See below for a full list of assertions:
Music:
* Success Of The Whole Team by WinnieTheMoog
Link: filmmusic.io/song/6397-succes...
License: creativecommons.org/licenses/b...
* Video:
- Heavy Machining
- • Heavy Machining | Seco...
- Seco Tools
- / secotoolsab
- The Biggest Lathe in the World Part 01
- • The Biggest Lathe in t...
- The Biggest Lathe in the World Part 02
- • The Biggest Lathe in t...
- The Biggest Lathe in the World Part 03
- • The Biggest Lathe in t...
- The Biggest Lathe in the World Part 04
- • The Biggest Lathe in t...
- Axel Fibro
- / @axelfibro2535
- CRANK SHAFT MACHINING OF 4000 TON PRESS
- • CRANK SHAFT MACHINING ...
- MAYUR SHAH
- / @yashengineering
- Herkules Grinding WS1100 WS600 WS450L
- • Herkules Grinding WS11...
- Maschinenfabrik Herkules
- / @maschinenfabrikherkul...
- Hankook Propulsion Shaft Lathe
- • Hankook Propulsion Sha...
- Han-Zu Haller
/ @han-zuhaller2143
-
- PROFILE ROLL SHAFT MACHINING ON CNC ROLL TURNING MACHINE
- • PROFILE ROLL SHAFT MA...
- 1600 ton press cranck shaft reconditioning done on heavy duty CNC skoda roll turning machine
- • 1600 ton press cranck...
- SAFOP CNC LATHE HT18 V@
- • SAFOP CNC LATHE HT18 V@
- RBR Machine Tools Ragnini
- / @rbrmachinetoolsragnin...
********************************************************
* We want to support all companies or people in promoting their products, services or companies. If you need our support, don't hesitate to contact us via email goiluoivn@gmail.com
If you are the video copyright owner and do not want us to use it in this video, please contact us via email goiluoivn@gmail.com. We guarantee to remove your video immediately.
* Thank you for your cooperation.
***************************************
*Disclaimer: Global Technology TV is not affiliated with the businesses whose products are shown in this review. Any trademarks depicted are the property of their respective owners.
@DXT61 Рік тому
Almost bought the exact one at Harbor Freight last week with a coupon.
@SilentPartner79 Рік тому
Careful, might have been a knock-off.
@galewinds7696 Рік тому
Better deal on Amazon, with free delivery, bought 2.
@Lukelins1 Рік тому
@@galewinds7696 2 day shipping right
@galewinds7696 Рік тому
@@Lukelins1 5.00 dollars overnight
@Lukelins1 Рік тому
@@galewinds7696 even better
@jimh5031 Рік тому
A fantastic CNC marvel without doubt, but I was using bigger manual lathes over 45 years ago until they de- industrialised the UK.
@1pcfred Рік тому
Yeah if a lathe doesn't have its own elevator it's nothing.
@Pow3llMorgan Рік тому
@@1pcfred And a wheelhouse on the carriage.
@1pcfred Рік тому
@@Pow3llMorgan a perpetual poker game too!
@thomascolville9438 Рік тому
@@1pcfred And a string attached to a bell when it comes to the end of a cut.
@uvk99 Рік тому
Exactly, I used to work on a large Cravern Lathe, way back, two overhead cranes used load me up, used to stand on the saddle most of the shift, nackering climbing up and down. I'm retired now, but i know the still have that Lathe, used to enjoy it though..
@michaelbyrnee9584 Рік тому
In the Number 2 Machine Shop at Bethlehem Steel at Sparrows Point, MD was a lathe 125-feet between centers. Finish cuts needed to be made at specific tidal times to avoid distorting the workpiece.
@ricky107_ Рік тому
Wait what did tidal times change?
@t.texastimmy1022 Рік тому
@@ricky107_ the workpiece would have lifted slightly off center, causing a dimensional anomaly ...
@blackburn1111 Рік тому
That's incredible. I've heard amazing things about that place. I wish it was still there. Seems like an age old story, places driving out industry.
@jacksonlefteye Рік тому
damned commie MOON screwing up my BALANCING AGAIN
@michaelbyrnee9584 Рік тому
@@blackburn1111 With help from a neighbor, who knew about my mechanical abilities, and who was a big boss at one of the mills there, I went from a high school dropout to tool & die maker apprentice, roughing out and finishing explosive bolt sets, helping a small group machine thrust domes, and working on other contracts for the Apollo Moon project. When the NASA work came to an end, I worked at the Point for another few months until 12,000 engineers and machinists were paid off (me included). I never worked in that industry again, but what I learned there in three years was an enormous help in subsequent businesses. My favorite Point story was one that I actually witnessed. A group of half a dozen guys were sent down to inspect a tunnel used to carry gas lines from the coke ovens to Baltimore City. We were equipped with respirators, HD flashlights, and two-way radios. Nobody had been in that tunnel since the end of WWII. we had only gone a few hundred feet when we came upon a makeshift table, four makeshift chairs, four poker hands had been dealt, and on the four chairs were the desiccated remains of the four poker players. Each of the men still carried ID and ring of tool checks. Apparently, the men all worked on graveyard shift, and every night, they would leave their machines to their helpers while they went underground to play cards. One night, there was a huge gas leak which probably killed the men instantly. The company reportedly placed the four on AWOL status and terminated them, not knowing the men had never left the job that fateful day.
@jdwht2455 Рік тому
Is it a big lathe, Yes. Largest? No way. Working in a factory years back, the lathe at the next work station had a 144" (12 foot) swing and a 50 foot attached bed plus a long, unattached sub bed. Across the aisle was a 'little' 84" swing, 25 foot long bed. There were larger in a different department making steam turbine rotors
@galewinds7696 Рік тому
A piddly 12 ft. Swing? We scraped those making room for 20 ft Swing.
@galewinds7696 Рік тому
@John James do you think he would sell it as is where it's at?
@misterflibble6601 Рік тому
Mine's bigger than yours
@barrysmith4588 Рік тому
we had a Craven at folkes forge in kidderminster that was from chuck to tail stock 33 metres long. a swing of 96". it had 7 steady's and me "shoveling the swarf" great days of engineering. i weep when i see these great machines.
@prestonburton8504 Рік тому
One of our customers has a Craven - every time i walk by it I think "wes Craven' and 'nightmare on elm street' lol. Its a beautiful machine and they just had spindle main bearings replaced. She runs like the day she was built! God Bless!
@christopherdean1326 Рік тому
I remember many years ago watching something on TV showing a huge nuclear reactor chamber (or something like that) being turned on a gigantic lathe. The original casting was 15-20 FEET in diameter, made this look like a watchmakers lathe.......
@jameslee4946 Рік тому
I did work in Todd Shipyard, in Seattle, WA. working on a very long Lathe was finishing turning the ship's rail shift, I love being a machinist.
@vincentliuo Рік тому
so this is for a ships transmission???
@jameslee4946 Рік тому
@@vincentliuo Yes, the propeller goes on it.
@printzapper Рік тому
USS America had a damaged drive line that occurred in the Atlantic during a rough crossing. It stayed in and the vibration continued for almost 20 years until it was decommissioned. How do ya remove and replace?
@jameslee4946 Рік тому
@@printzapper Many reasons cause vibration it needs rebalances or replacement, bearing in this drive shift, Send to dry Dock for the repair job.
@jameslee4946 Рік тому
@@vincentliuo This is a propeller shaft for the ship which they call a driving shaft.
@drevil4454 Рік тому
"Mine is bigger than yours" is definitely applicable here
@SenileOtaku Рік тому
Looking at the thumbnail, it looked more like someone was building a full-scale model of the Wave Motion Engine .
@walterkucharski4790 Рік тому
When I was a kid I worked in a shipyard and the lathe I used was much bigger. I had a seat on the carriage and went for a ride that often took a whole shift for 1 cut.
@printzapper Рік тому
I worked on a 24" hollow spindle. The steady rest was out in the steelyard on a chain trolley. Manual API thread repair of tool-steel subs, casings, and drill rod. Had to stab the little door, and both sets of jaws. When I turned the tool steel I had to specially grind my tool into what was called a spoon. 20 rpm, feed-rate, min .060", 3/8 depth. Engaged cross feed and lateral feed simultaneously to hog off the end. The shaving came off glowing, then turned a nice blue, razor sharp. It would snake around my lathe and I kept an eye on it (among other things), ready to redirect if it with my broom handle if it got hung up.
@fredflintstone8048 Рік тому
How wonderful it must be to work on a lathe that has a tailstock that the operator rides on, and it has a guard rail as well.
@theturdcurd2382 Рік тому
the operator rides on the carriage, not the tailstock.
@fredflintstone8048 Рік тому
@@theturdcurd2382 I looked again. It's the tailstock. It's flat faced with a hydraulic ram with a center in it to support the part. The carriage is shown toward the end with it's rotary turret. That's different. Not what I'm talking about. He's riding what on other lathes would be called the tailstock, not the carriage.
@theturdcurd2382 Рік тому
Whatever, I worked on one, but you be you, I'm not gunna argue over this.
@fredflintstone8048 Рік тому
@@theturdcurd2382 Smart. The thing the man was riding on with the handrail had a flat face, large plunger that moved out the flat face. the center of the plunger had what appears to be s dead center in it that they show coming out and engaging the long shaft coming out of the chuck. The tailstock had no other tooling on it. In my machining world we call that a tail stock. Later in the video they showed a turrent with various tools on it that would rotate and the tool would move off onto another part of it. That would be the carriage. But what am I going to believe, right? You or my lying eyes? Sorry, I don't believe you've ever come near one of those machines. I think you took a hasty look at best and made a hasty comment.
@theturdcurd2382 Рік тому
Were talking about 2 different videos then. Again, not gunna argue.
@t.texastimmy1022 Рік тому
It might be the longest CURRENTLY operational Lathe, but there were many larger ones in the recent past.
@cyneater6300 Рік тому
yes on in victoria Australia make this look like a baby
@RJ-lj3zt Рік тому
Allis Chalmers had the world's largest lathe in Milwaukee, until it closed
@Mr.SisterFisster Рік тому
It's just clickbait
@domenicobellicini 2 місяці тому
Ho un ko no @@RJ-lj3zt
@gudnite 4 місяці тому
I worked in NDSM in Amsterdam where I was told that the largest lathe that they owned was reputed to be the largest in the world and the first time I saw it there were four men standing on the toolpost with room for more. I honestly could not believe it was a lathe at first until I witnessed a large marine crankshaft being turned. That was back in 1965 and sadly NDSM closed about twenty years or so after. The scale of the machinery in the large machine shop was like a giant fairy tale and I am so glad to have worked for them.
@schneisim Рік тому
Impressive setup. But there are larger ones still opreational. 30m length for turning reactors are still in use mid of germany.
@timekeeperg9651 9 місяців тому
those are simply amazing!!! im no machinist i just enjoy watching those things at work for some unknown reason!!! i think maybe i should have at least dabbled as a hobby!! its just cool imo!!!
@prestonburton8504 Рік тому
I wish i could post a picture of a large Betts lathe at a shipyard that has the contract to do the Nimitz class air craft carrier shafts - huge! twin carriages and we put CNC controls on it including dual servo through 50:1 apex gear heads that work together and zero out the backlash on the Z axis rack. This lathe will cut a class 3c thread and its swing is 17.5ft 150ft centers and about two stories tall. Because defense work - we are not allowed to publish pictures. God Bless and thank you for presenting this awesome lathe!
@vigormanh2980 Рік тому
I was doingsimilar work. We had machinists worked around the clock at that time. It was very impressive for a younger me, fresh out of NTMA training facility and met the real world. It was almost 30 years ago but I still recall vividly everything.
@prestonburton8504 Рік тому
@@vigormanh2980 this shop is very large - 24 round the clock support and now a 10 year backlog. They just purchased two Italian lathes (i'll edit later when i remember the names) - these are huge full CNC on delivery and required immense foundation peers and piles prior to their placement.
@vigormanh2980 Рік тому
@@prestonburton8504 It great to have ton of works line up. Must be a busy machine shop. Now, back to the size of the CNC lathes or CNC turning centers, those are shown on this video are not very humongous. I wonder if you have ever seen the vertical lathes. I have worked on them for couple of years. Very impressive they were.
@prestonburton8504 Рік тому
@@vigormanh2980 yes - the largest are specialized Bullard's made for the power industry that cut the forms used to make heat treated pipe, couplings, elbows and bell fittings. As of six years ago, they still used hydraulic stylus pens that edge follow large patterns that repeat the contour shape on the forms. These forms are then used as mandrels during forging process and before final heat treat (38RC but i've seen 48RC on treats) - very high pressure superheated steam in primary loops. We are waiting for them to finally decide to go CNC but union opposition as well as certification of process stops this. Actually, that is in texas and mexico plants. Some of our shipbuilding plants cut ship pistons on large cnc now - but the largest is an asquith manual 30ft table that was made in the 30s and i've actually worked on the one in newport news shipbuilding - hand made by them in early 1900s and is used to make propellers and parts of the shaft drive line including the final part that gets fitted into the hull. I dont know if its been converted to cnc yet.
@JohnnyUmphress Рік тому
I can't even imagine the foundry that produced the enormous blank for that job.
@donlunn792 Місяць тому
In Newcastle when we had a Shipbuilding industry,there was a lathe for turning ships propeller shafts. It had operators on both ends,who sat on the carriages and were in communication with each other. “ That was a lathe”
@Pow3llMorgan Рік тому
Looks like the tool holder wasn't secured tightly enough. It moved when the insert engaged.
@unacceptableminority7101 Рік тому
Could have just been backlash or even flex from the massive amount of pressure on it.
@catranger01 Рік тому
Looks like the machines at Farrel Corporation in the late 70's.....except the one in the video is smaller.
@randymagnum143 Рік тому
We got a 130" X 37' Farrel. New Siemens 840d control. She's a sweetheart.
@vendomnu Рік тому
How big do you want your lathe? 'The tool carrousel has to be an actual carrousel.'
@JelMain Рік тому
Plays Colonel Bogie when it chatters?
@evilroyslade6477 Рік тому
I worked on CNC Mills that make this look like a toy. 1 story underground and 2 story's above.
@galewinds7696 Рік тому
Did you work on the third floor 😳
@mackk123 Рік тому
thats the 42nd smallest lathe I've ever seen
@berntinulkshredder Рік тому
@mackk123 you must be operating lathes than don't touch the ground because they would warp because of the earth hemisphere nature!!!
@slimanekrimat4391 2 місяці тому
Ikuuuuuÿ bisous y nnnjsjjgya🎉😌😏🥰😌 0:37 🇮🇪@@berntinulkshredder
@feellucky271 Рік тому
The piece their repairing at 2:33 is said to be a crankshaft but appears almost identical to a camshaft with a offset lobe like one, there's no clamping surface to allow for it to set like a crankshaft in a journal.
@backho12 7 місяців тому
Probably an eccentric for a mechanical forging press.
@richarddillio6258 5 місяців тому
What most comment's fail to recognize is the change in CUTTING TOOLS ,,, end mills, Grinding Wheels, and turning along with coolants have made all the real changes that is where the technology is. A Lathe has been a Lathe for a Thousand Years.
@igokarts4510 Рік тому
I can still hear MR1 Morenz "feeds and speeds" but it's in that slowed down deep voice like when you play a 45 on 33
@michaelnaretto3409 4 місяці тому
I could spend all day watching that huge lathe go to work.
@timothybourgeois3922 Рік тому
I ran a Craven lathe with 120” chuck all manual.
@urlkrueger Рік тому
What I find most interesting is that forgings the size of those workpieces can be made without internal defects.
@amarshall88 Рік тому
That's what i was thinking. I assume on a piece that size the tolerances are a bit looser than what I would expect too. I wonder how much that blank cost
@lesliestar6344 Рік тому
You can pretty much be assured that when the final product has $100,000+ worth of machine time scheduled (OR MORE), on it, several pre-machining inspections have taken place. (X-ray, Magnetic particle, ultra-sonic, etc)
@globaltechnologytv6353 Рік тому
cám ơn bạn góp ý .
@nancyhyatt5246 Рік тому
GE was operating lathes bigger than this in the 60s, they would make chips 3" wide and had a chuck that was at least 14 foot in diameter. Length was variable since they could put in track sections to make Length whatever they needed. The steel mills of Pennsylvania had even larger ones. Most were sold off when the mills closed.
@arthurguilfoil1082 Рік тому
I worked on a 16' Mesta lathe in Anaheim,Ca at the Ge apparatus service shop where they repaired turbine spindles. They had bid VTLs there also. Fun work.
@jdwht2455 Рік тому
The largest in Sch'dy LGM dept, 1960s (Bldg 16) was the 144" noted above. LSTG (Bldg 273) most likely had even larger but that wasn't the dept. where I worked then.
@petar6950 8 місяців тому
how many people can this lathe?
@emilcioran8873 Рік тому
Kind of a shaft which fits into Kardashian sisters
@frankschultz4170 Рік тому
Does it also trepan?
@hztn Рік тому
Pfff. How about a 6 meter diameter chuck? (not vertical)
@siliconvalleyengineer5875 4 місяці тому
I worked at Westinghouse in Sunnyvale, CA 1980's 1990's. and there was a huge manual lathe that size or larger there.
@JohnBoyDeere Рік тому
See the tool holder move at 0:02 seconds, very professional for the biggest of big, big, biggest lathe in the world, ar!
@theephemeralglade1935 Рік тому
It's still accurate to a tenth... Of a meter.
@billklatsch5058 Рік тому
I work with wobbly machines and can do fits with .01mm tolerance - i guess im a magican. If the tool moves while roughing it does not matter that much. And even while finishing it can be compensated if you know what you are doing and you know your machine, thats why it takes at last 5 years to make a newbie into a *somewhat* decent turner. Its suboptimal yes, but life is not butterflies and rainbows only.
@JohnBoyDeere Рік тому
@@billklatsch5058 Tell us some more precision tricks Bill, I am very intrigued by your machining norms...
@deandee8082 Рік тому
little lathes made the bigger lathes, and the cranes so on so fort just as smaller blast furnaces make the largest blast furnaces .. crazy, you cannot make a large gear without the smaller gear being made first, try it..
@matotopic7037 6 місяців тому
Lijepo je raditi n'a takvim velikim strojevima,i sam sam radio 14 godina,na takvoj masini .
@charlieromeo7663 Рік тому
NIce, but the closeup cuts are disruptive and too short on the machining. Also, the white text pop ups are difficult to read since they didn’t have enough contrast with the background. Content was interesting, but the production was quite lackluster.
@RovingPunster 5 місяців тому
Is that a lathe or a TBM ? 😂
@m37cdn Рік тому
Remember, all new machines were made on older machines, the accuracy comes from the operator
@wildschuetzjaeger2316 Рік тому
That's true. I worked as a lathe operator on conventional and CNC lathes a long time with parts up to 1000 kg. One mistake and a part worth a couple 1000€ is trash.
@BasementEngineer 5 місяців тому
For the final product perhaps. But machine tool accuracy is required for certain operations such as the flatness of turbine shaft flanges, straightness of gun barrel bores etc. These require accurate machine tools. The machine tool fitters are the ones who assemble the various machine pieces and adjust and fit the pieces to achieve this accuracy.
@Self_Evident Рік тому
This was such a great video, I subscribed twice! Once for each time you felt it necessary to add the obnoxiously annoying "ding ding" [Subscribe] animation.
@johnhansen2215 Рік тому
I have already suggested he should add more of those nice notifications in hes videos, preferably every 10 seconds with a louder bell and in the middle of the screen, just to make sure people don't forget to subscribe.
@galewinds7696 Рік тому
Only twice? I hit subscribe 3 times
@grugbug4313 Рік тому
Solid! Top KEK!
@Crazcompart 6 місяців тому
A turbine center rotor that large that _HAS_ to hold the tightest possible concentricity and surface finish because of the high RPMs involved! Something to be marveled!
@globaltechnologytv6353 6 місяців тому
The camera's tripod is not sturdy, so the image is not very good. Please understand
@jasonh6312 7 місяців тому
Love the white text on white background 🙄
@globaltechnologytv6353 7 місяців тому
thank you
@bradleywilliams2401 Рік тому
U would have 2 Think LARGE in this Environment !! Amazing !! 👍's UP...
@johs290185 Рік тому
First few clips are stolen from Seco (clearly) . Also sped up compared to the original
@hernancoronel Рік тому
“OMG, I made a mistake! Can we do it again?” LOL!
@RawzesCollection 3 місяці тому
the title is absolutely mis-leading. Those machines are tiny compared to the equipment I worked with back in the day.
@nigelrg1 Рік тому
You haven't seen many big machine shops, have you?
@patricksoileau9246 7 місяців тому
The algorithm is biased to trolling.
@africanelectron751 Рік тому
When you gotta get the special catalogue to order inserts you know that it's good.
@rubbermoetroken 5 місяців тому
That first piece of steel seems to be the ram of an IHC IQIP hydraulic impact hammer ? (could be Menck as well)
@mauroclemente2469 8 місяців тому
Questa è la mia gioia molto forte questa lavorazione.
@globaltechnologytv6353 7 місяців тому
Congratulations
@johnarnold893 Рік тому
almost impossible to read the text description since it was small, white and only displayed for a couple of seconds. Voice description would have been much better.
@NoName-zn1sb Рік тому
!!
@chattarsingh9538 4 місяці тому
OLD IS GOLD 🎉
@Patches33001 Рік тому
Bruh pick a font color different than the background the text is on smh
@mrfinder18 Рік тому
Definitely not the largest by a long shot. My partner and I designed and built larger ones for on site field machining at power plants. One of the lathes in our shop, we got from a shipyard in Maryland. 100' Ft between centers Giddings & Lewis. We found a old ass pic when disassembling the machine for transport. Apparently it was one of the lathes that machined the 66ft long barrels on the USS Missouri.
@eweunkettles8207 4 місяці тому
made in a wee fishing town in Arbroath Scotland lots of giddings lewis fraser machines still being used jig borers etc sadly company no longer there
@NoName-zn1sb Рік тому
Way to go! White captioning on a white background! QWF?
@PTEmedia Місяць тому
This is amazing !
@gabrielpowers766 Рік тому
I'd like to see someone take this huge lathe and use it to make the tiniest thing it could possibly make.
@ronalddavis Рік тому
sharpen a pencil with it
@berntinulkshredder Рік тому
If its jaws can hold a 📍 as, a needle I will if I get or come close to one!!
@williambarry8015 4 місяці тому
"Gee, sorry Boss. I read the micrometer wrong and took off too much metal"
@chaosopher23 5 місяців тому
These lathes could easily make some God-sized weed pipes.
@lacaver64 Рік тому
wow very big and heavy machines
@John-qc6of 3 місяці тому
Where is this thing?
@rustyme1122 Рік тому
Imagine turning a giant shaft and scrapping the part on the final cut. 😫
@moconnell663 Рік тому
In making only one of something so massive, it may be permissible to simply alter the dimensions of the mating part to match it.
@teamidris Рік тому
Yes, a bloke at GEC committed suicide after taking too much off on the final cut.
@galewinds7696 Рік тому
Company won't even give you time to get your tool box, out of here!!!
@BasementEngineer 5 місяців тому
@@galewinds7696 Good employers never punish for an honest mistake; after all that is how one learns. Just don't make the same mistake twice!
@gudnite Місяць тому
All machinists stand in a few puddles, some deeper than others it's called experience.
@MikeEnglund-ih1zh 3 місяці тому
The lathe at Allis Chalmers had a 12' diameter headstock. The tailstock rode on rails.
@billcornelius1383 Місяць тому
nice video but it's hard to tell what's actually going on. it's a bunch of short segments of different processes.
@kurtdereisenflechterkulle8135 3 місяці тому
Bin mit 38Jahren mit meiner Umschulung zum Dreher fertig geworden, niemals kommt man dann an so ein Werkstück!!! Nur als Video. Kurt
@TNT-nz8qr Рік тому
I do have to say its nice to see somebody take a cut instead of piddling around with these tiny stringy chips
@williamrobertson9155 День тому
Craven machine tools Manchester England,thats right England,made the most massive lathes and associated machines this planet has ever seen!! Look up there history and be in awe!!!
@sidcup1421 Місяць тому
Just Brings back good memories of workingWebster Bennetts and big lathes not CNC
@JelMain Рік тому
That wasn't the one of the sfafts for HMS Prince of Wales, perchance?
@abbush2921 Рік тому
Machine Tool Madness !
@scottdable5182 5 місяців тому
With a coupon , nice touch
@steveukable Рік тому
I worked in a shipyard in my 20s, they had a lathe with a chuck over 15 ft in diameter, and even that was not the biggest.
@georgedennison3338 4 місяці тому
If I was forced to choose just one piece of equipment for my shop, I guess I could be satisfied w/ a 12' × 40' CNC Lathe. I'd certainly have material size options. Hard on neighbors in a mile radius, their lights'd dim & computers reset every time I fired it up. Uh, they'd get used to it...
@keithcampbell7820 5 місяців тому
How many noticed the balance weight?
@chotuusian4127 Рік тому
Good work
@jerrywilliams5741 Рік тому
In the world's largest lathe competition, this one doesn't even make the starting grid.
@Brunoinski 19 днів тому
Look at all the gravy. Sunday work
@williambarry8015 4 місяці тому
That is some cool stuff.
@turretbarrage2707 Рік тому
I got fired from a shop for making myself a buttplug.
@galewinds7696 Рік тому
Should have offered to make the supervisor one
@globaltechnologytv6353 7 місяців тому
Please share with you, hope you will have many good opportunities in the future
@perpetualjon Рік тому
I'm surprised this video is not very old. Let me offer you some advice: 1. Abandon the bell clanging plea to subscribe -and especially doing it 6 TIMES IN A SINGLE 8 MINUTE VIDEO!! God, that was annoying. Either that, or this could become a drinking game... 2. Find a narrator for your videos. It shouldn't be too expensive if you do a little homework. Maybe someone on Fivr will do it for you if you don't have a decent microphone and voice yourself. 3. If you add text to a video, either outline it in black, or do a drop shadow. But it is very hard to read when your background is moving. Hell, you could just as well re-edit these videos and black out the original text and overlay white text over that and call it good. What's funny is that there is a single instance of a black-outlined block of text towards the end that tells me this entire video might have been lifted from other sources and stitched together with multiple editors with different ideas about how to add information. 4. Assume the viewer does not understand what they are looking at without some general explanation. You won't be insulting the people that do but the unaware viewer will at least better comprehend the significance of the machinery rather than just showing random items moving around without any context. And if you aren't able to convey such context, then you aren't ready to publish the video and have further homework to do! Good luck with your future videos!
@NoName-zn1sb Рік тому
!!
@globaltechnologytv6353 Рік тому
cám ơn bạn . lần sau rút kinh nghiệm
@christophermcmurray9226 Рік тому
This is definitely NOT the largest. It is definitely not the largest operational lathe, either.
@marvinmartian7941 Рік тому
I dunno if their as big as the ones we saw when we went down to the power stations workshop in the 80s
@gone547 Рік тому
Boggles the mind to think of the world's largest tools needed to make the world's largest lathe. And then.............
@BasementEngineer 5 місяців тому
Not that difficult once you know how. Very large machine tools are assembled from numerous smaller subassemblies which can be machined on much smaller machine tools. Take a lathe bed for say 100+ feet of length for ship tail shafts and ship's gun barrels. The lathe is assembled on a concrete block to give the bed stiffness. The bed guide ways are assembled from smaller length sections each of a length to suit the available machine tool size, say 16 feet long each. Thus 10 of these 16 ft long section would be assembled into one long lathe bed. Fitting these pieces together to permit machining of accurate gun barrel bores is an art unto itself, requiring much experience and trial+error work in the beginning. Nowadays optical and laser alignment testing equipment makes that job much more predictable and easier.
@unacceptableminority7101 Рік тому
Here at Aperture we use the whole insert ... thats 60% more insert per insert!
@MrUtubeobia Рік тому
I would hate to be the one that screws up one of those big shafts.
@1pcfred Рік тому
We were making a large live center and screwed up the milled slot in it. So we just welded it up and milled it again. But yeah it's not a good thing to do. Still with metal you can get away with doing that. The foreman was all over the guy that screwed it up for a while. I doubt the customer was ever the wiser though.
@brianalder2234 5 місяців тому
Harbour freight were out of that model so went for the bigger one instead ! 😁😁😁😁😁👍👍👍
@peternewman3487 Рік тому
But who made the lathe that made this lathe ?
@luvmechanix Рік тому
How do you define largest lathe? This may be the longest between centers but it certainly isn't the biggest swing
@johnkulpowich5260 Рік тому
I use to wire up those machines for the Farrell Corporation. Japan and China. Bought the top of the line. So where are we now
@andrewmichel1633 8 днів тому
What do u do if you scrap a part this big?
@leaettahyer9175 Рік тому
My harbor freight lathe could turn that shaft as long as I oil it well before starting.
@alexlo7708 Рік тому
I think biggest lathe lies in vertical. This is just a long lathe.
@ChefKevinRiese 5 місяців тому
Can I get that at Home Depot?
@yaseraboalola7245 4 місяці тому
الأيدي الماهِرة الرَّائعة تصنع المستحيل أيدٍ ماهرة .
@marvinbalabat8100 Рік тому
❤❤❤❤❤
YouCanDo TV
Переглядів 415 тис.
Ми - Україна
Переглядів 1,5 млн
X-Machines
Переглядів 1,8 млн
YouCanDo TV
Переглядів 585 тис.
Modern Creative
Переглядів 228 тис.
YouCanDo TV
Переглядів 933 тис.
Screen
Переглядів 694 тис.
B_Kino_U
Переглядів 1,4 млн