HEY. Thanks for watching Tell me below where in the world are you all watching from??

This is a great wood project book ukposts.infoUgkxkPIWb22DigCqxmlXerCyUF4HCl6eSU2L . Most of the projects use the pallet simply as a source of reclaimed wood not as a recognizable pallet so even if you didn't have a pallet you could make these projects with any reclaimed (or even new) wood. The instructions are excellent. The style is charming and would work with lots of different decor. There are quite a number of projects that involve tiling of teh wood pieces which is a really cool idea and can produce beautiful pieces when working with aged wood.

It will always amaze me how on earth can this be done, the weight of the wood would scare me never mind working on it. A true peace of art, I realise that it’s not simple to do as you seem to make it look. Well done it’s fantastic.

Jack, as a new wood turner I watched this many (many) times. I was fascinated in the process of building the tenons and putting it all back together. I have now tried this and managed to get a fairly similar end result but my vase is about 10" shorter than yours. Thanks for the help and now I am confident enough to try some of your other projects and a few of my own originals. I am very much enjoying the world of wood turning!

Watching an artist turn raw materials into things of beauty fascinates everyone. Thanks for adding to our learning pleasure.

It's fun when you get it slowed down just enough that its rotation is roughly a factor of your camera's FPS, so it looks like the block is standing still while you carve into it :)

I'm not even into woodworking and yet I'm glad UKposts recommended this. I'm amazed by the 3-dimensional planning needed to turn such a large piece on the lathe. Outstanding craftsmanship! 😎👍

I was so confused when you cut it but I guess you just gotta trust the process cause it looks amazing!

watching from Egypt🇪🇬❤️

There’s something mesmerising about the sight and sounds of the art of woodturning on a lathe - especially wet wood and sharp tools, as a kid I would sit and watch my dad turn for hours and once I learned I really enjoyed the process - it scratches an itch for me

With as many cross sections you did, I expected a more varied grain pattern in the end, but this project came out awesome all the same. I love watching you use your skew, because that is one lathe chisel I was never able to use effectively back when I was a "junior high aged master lathesman" (age adjusted of course). After clearing the bulk of material with my gouge, my go to for smoothing, even on a straight run, was the roundnose. My instructor was amazed at the smooth lines I could maintain with the roundnose and called me the most skilled tool man he had ever seen, and then laughed at me for not being able to effectively use the proper tool for the job...a skew lol. I have not turned a piece of wood in almost 40 years, but this brought back a lot of fond memories of all the lamps, bowls and other things I made in my early teens.

My first time EVER seeing anything like this. I’m intrigued and just amazed. Again I’ve NEVER seen anything like this. Astounding.🥰

Why was it so relaxing and fascinating to see a wood vase made?

At first, I was thinking it would be an oversized goblet...ho hum...THEN POW 💥 it turns into a STUNNING articulated vase with one of the best wood figures I have ever seen!!!!! Superb visionary craftsmanship!!! 👏👏👏

Wood turning is so magical. This piece kept on reminding me of the CPU in the original TRON; the way that it spins until the rotation matches the frame rate, and the pattern in the wood appears to become stationary.

HYPNOTIC!! Absolutely brilliant

I've done some wood turning...but nothing like this. This guy knows his stuff! Brilliant workmanship!

That is one amazing vase! I really admire the way you sectioned it off, to hollow it, and then put it all back together, to finish it. Thanks for the lesson on how to turn enormous objects!

This just goes to prove beyond doubt that, “even if you are left-handed” - you can still become a World-Class Lathe Master🏆🇺🇸

I'm Turkish🇹🇷 watching from London. ❤ your work.

Great idea, each vase is a work of art 👍😀

A work of art, I like the unique grain patterns. Very well done.

Just got my first lathe for Christmas from my wife and kids. As it is used, I am currently restoring it and this is good inspiration!

I was blown away by your ingenious process. The finished piece is phenomenally beautiful!

Parabéns. grande artista. Eu fui torneiro mecãnico durante 57 anos, não maquinava madeira mas sim... aço e outros materiais ferrosos. Mais uma vez parabéns, Um abraço. Gostei muito do seu trabalho.

Washington State, USA... as someone who’s barely dabbled on a lathe in the past, I have great respect for your skills & craftsmanship. That’s a beautiful piece of artwork right there 🍻

Beautiful. I was devastated and lost when you segmented it, but it turned out amazing and segmenting it was so smart. I turned wood (small pieces, still learning) for a short time when I was in high school but gave it up when my mentor died. I loved it, but wouldn't even know where to begin again at this point (almost 20 years later).

The inertia of the log seems to be rocking the machine, that's insane and triggers my anxiety 😂

I loved it as it started to take shape. Then the lines started to go in and I panicked that the look was terrible. Then came the finish and the grain popped and I was like, "I'm over here critiquing this man like I know something!?" Beautiful!!

Beading the vase not only looks great, it also makes the joints where it was put back together after being hollowed out practically unnoticeable! Amazing work!!

Stunning result from what I initially thought was a video on how to chisel a huge log into shavings! Awesome to watch for a layman.

I could watch these all day!! I wish I would have learned this earlier in my life! I'd love to at least learn n try this. Everything I watch turns out absolutely beautiful! I'm sure there's plenty of F Ups that don't make it! But the ones that do, make for wonderful ideas when I decide to try which ones I'll try n do 1st! Lol bravo! bravo!

AMAZING!!! All that varnish put on that beautiful masterpiece with only 1(one) dip of the brush.

At first I was yelling inside “no don’t cut it up! That’s cool the way it is!” Stuck around til the end. 🔥🔥🔥🔥🔥🔥🔥 the outside lines made it looks so good.

Обожаю смотреть на токарку. Вроде ничего сложного,но нет,просто волшебство какое то.

I could NOT figure out what you were doing until about halfway through. Gorgeous and genius.

Türkiye’den selamlar 🤚🏼Sizi yeni keşfettim.Tasarımlar 🤩 harika

That's a huge log! The cutting tool makes an awesome sound when sculpting this work of art. Love the ribbons of wood that flies off as your cutting each layer. Looks like you got quite the workout with this piece! Beautiful work!

The craftsmanship and experience needed to produce this must be significant. GREAT viewing!

It’s an honour to watch a master craftsman at work. Thank you! From the U.K.

WOW !!!! That work left me speechless . I can only wish that I would someday be able to do work like that . Thank You for sharing with us all .

I'd give it an 8/10. I deducted 2 points for it not being in my living room. :D Absolutely awesome piece.

I think you've outdone yourself on this one. The beading makes it appear woven only more beautiful. I liked the whomping willow, much more before you painted it; I'm glad to see you make this one natural. I'd be interested in know where it ends up. Thanks for sharing.

Dunedin, New Zealand. I like how the wood changes and brings patterns .🙂

Portugal, Lisbon - can't stop watching!!!!

Thanks for sharing this turning it is an amazing piece of furniture that you completed thank you for letting us watch what you do and how you're doing. It gave me some good ideas on how to do something that I had no idea how to do and I've been doing this stuff for 50 years. Best regards from Bob, Virginia USA

That was absolutely amazing! You sir have an advanced skill set.

Gênio é gênio e ponto final! ENCANTADOR!!!

This looked like it cut like butter. I love the end result!

Absolutely gorgeous! It's beautiful. I wanted to let you know how much I enjoy these videos. I love woodworking, though never had a skill for it. I like the fact that you don't have music or voice, just the beauty and magic of the turning. Thank you.

Эмоции через край! Приятно смотреть на работу МАСТЕРА,завораживает,просто СУПЕР!!!

Absolutely gorgeous work. It confused me at first when you made sections but the entire piece turned out amazing in the end.

You, sir are a true artist. Thank you for sharing this work of beauty with all of us!

How are some people so good at some things! Never say never though. Beautiful craftsmanship and a beautifully constructed video

Dude, you are a woodworking magician! You have some kind of magical superpower when it comes to making something out of nothing from wood. All I have to say is you are awesome and you deserve all the praise for the good work you do. I’ve never seen your channel before this is my first time, and I’m just completely blown away at how good you are.

Ваза 🏺 получилась очень красивая, в неё можно поставить какие-нибудь красивые сухоцветы - подсолнухи например или ещё что. Спасибо 🙏 большое за ваши золотые руки. 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

Nature and man - expertise to create beauty of the object and amazing know-how of the professional -many thanks!

The most fabulous result Wow 👌 👏 😍

Absolutely amazing I would have stopped at the amphora shape at the beginning and been happy.

Какая шикарная ваза получилась!!! Браво, мастеру!!!

This is freaking awesome!! A piece of art.

Watching you cut everything away that doesn't look like what you're thinking of is amazing thank you for sharing🥳🥳🥳🥳🥳🥳

Good to see Green wood on the lathe , not many seem to use it . Makes life so much easier , can be tricky to take a finish though . Good work (and very sharp tools) 👍 *edit , West Sussex near Brighton

The darker wood at the top makes it look like it spilled. It’s a cool effect and an interesting way to use the wood’s natural characteristics.

It is a display of brilliant skill. Go on.

I knew it was gonna be a vase of some kind when I saw the general shape. Watching it be turned into one was amazing though.

Напомнило уроки труда в школе! Спасибо за ролик!

Великолепная работа изумительный результат,при просмотре получил огромное удовольствие,у мастера ЗОЛОТЫЕ руки,а изделия АНТИКВАРИАТ. 🤙🤙🤙❤️❤️❤️

Magic from the mastercraft, sooo soothing.

What a relaxing video to watch. So much fun to see something beautiful being made!

Gorgeous, again a beautiful piece of wood art. The amount of skill you have is remarkable.

That is ridiculously amazing.

Quite literally monumental. Very relaxing.

Really well done! I liked it a lot more without all the bands but that's just personal preference but all in all really nice work

Another amazing job. So grateful for people like you who figure out cool stuff like this.

Fascinating process. Exquisite final product. I was impressed by how you used you hands for a tactile assessment in the final finishing steps of your creation. Utah, USA.

Watching from Lakeland, FL! My husband had a woodworking shop when we lived in WV, he built it himself with the help of family and friends, it was bigger than our house...lol. I love, love, love watching these videos...I can just smell the saw dust and wood shavings. ❤️

I love how sometimes, the fps and rpm lines up and it looks like the wood is standing still or glitching out. Funny story, before i started turning, i looked up videos and it always looked like the wood was rotating super slow. First time actually turning freaked me out on how fast it was going lmao ah those innocent days

It’s therapeutic!! I feel so relaxed watching this video. Thank you, great Art !

i love this so much jack, but i have to say, for every one of your projects, i really hope you plant a tree. love your work!!!!

Круто. Отличная работа! В школе очень любил предмет Труды, там на станках тоже делали разные вещи, конечно не такие большие, поменьше. Супер

What a gorgeous humongous vase. Great work. Breaking it down into smaller pieces was brilliant. The beading, genius. Take care.

Thanks that’s a really good way of hollowing a large form, very impressive 👍

Wood turning is by far the most underrated hobby of all time. I love taking giant peices and making them 50 different things before they eventually turn into a pen , vase, or baseball bat xD

That piece is just stunning. I could watch your videos for hours!

Hats off to your creativity and hard work in creating this vase👍

Wow! Gorgeous. I love that you let the changes in the wood show up in the designs. Nice job, from Kansas!

Amazing, it just fascinates me to watch this kind of work.

You maxed out your lathe!? AMAZING!!!

This was a delight to watch! The final product is beautiful, unique and phenomenally crafted!

Jack this is another surprise piece of art it looks gorgeous, awesome talent 👏 bravo !! Sir. Take care thanks 😊

Whoa! While I’ve got no use for a piece like that, it’s beautiful, and I would love to have the skill to build one. Nicely done and thank you for sharing. Happy woodworking.

Beautiful. Loved watching the process.

Amazing detail! Trying to talk my wife into letting me buy a lathe because I'm a metal worker also, but I would use it for wood more than anything.

Amazing work! I'm not crazy about the yellow finish personally but other that, awesome piece

incredible work. I can't imagine turning something like this! Watching you from Atlanta, GA, USA.

Son,you had me puzzled like a jigsaw watching this. Beautiful work!

So mesmerising to watch such skill! Lovely and beautiful.

This is incredible and I was gravitated to the process. I don’t do woodworking at all but I love to watch these master pieces being created. What a wonderful piece of art! I would love to own one of these!

I'm watching from Elkton, MD. And your masterpiece is just that... A masterpiece! It's so very interesting to watch you work and how you do what you do! Keep the videos coming!