Mower does fit through my fences gate without any problems ukposts.infoUgkx1VWTrayKBdCKAjzAcZ_Eg4dhHTae3LkN also recommend I had to level the deck side to side after a few mows maybe I may got too close to something and the deck may have dragged on it. Like others reviews have stated this mower will tear up the grass with the rear tires when making tight turns if you do not slow down. Wish mower came with a hour meter other than that works exactly like I thought it would.

i have a 2018 Maverick....love it! no issues with 200+hrs

only had a 54"Maverick with a Kawasaki 726. Great machine, good cut quality and it's designed the a bigger guy

Country Clipper XLT loving the mower!

Just bought a new Ferris IS600Z with the Kawi motor. I should have bought Ferris in the first place. Fantastic machines and the Kawi motor is bulletproof. I got lucky, found a dealer with a leftover 2021 for $5,730. Couldn't be happier with my purchase

I love my 2021 Spartan HD RZ 61” it is a beast

I love my Ferris 500S with the 61inch mower Deck

Warranty length and dealer support should be high on your list when purchasing.

Cub cadet ztx5 60inch I have in Australia, it's a beast

I love my Bad Boy

It's pretty obvious, the Bad Boy wins hands down. For several reasons, but the hydros seal he deal. 3200 vs 2800, it's not even close.

Can you do a video between the gravely pro turn z and the bad boy mavrick. I think those are the best mowers in the 7k price range. I would also like to see a video on the sun 10k that has a bad boy vs a scag, gravely, and Ferris.

The Ferris is sweet but that bad boy looks better than my wife on our wedding kk Ishtar. That bad boy is slick looking

Like the bad boy, good job showing and telling have a good day see ya next time see ya bye.

Bad boy MAVERICK maybe Ferris 600 great job showing and telling, have a great day bye.

Badboy the only way to go I have a maverick 60 in. An love it

It's the maverick, hands down

Well now this was an interesting video and I would say be bad boy for sure.

I have 2 Gravely ZTHD 60. 25 horsepower Kawasaki 730v. I love them. Suspension would make it a little better.

This exmark model could be lacking in a few things but it definitely cuts the best

Absolutely amazing that TORO for all its years....ain’t a contender.....

Just priced that Ferris IS600 here in PA July 2022 for 8513.00 with the 23hp Kawasaki and 52" deck for 8513.00. Wow didn't expect it to be that high.

I like the grasshopper brand and thats what i own.

I like the BadBoy best good quality tuff machine‼️👍🏻

Can imagine paying $7000 for that Exmark, my Bobcat CRZ60 has the same 2800 transaxle a better Kawasaki engine for under $5000.

KABOTA---?? 421-60 I love mine💥

Bad Boy sets the standard in this category. It stands above the competition when you compare features and build quality.

Buy a gravely 200 series or higher free deck warranty.5400 hydro pumps.

Farris 800

Good Video, but I would like to see more variety or more than 3 options. What about the Kubota Z412 or Z422. For a little more than a ferris it has a zt-3600 transaxle, a kawasaki 24 HP motor, a 4 year 500 hr warranty, and a suspension seat.

We have a lot of lawn's with Bahia grass and the ferris cuts it better than the maverick

The bad boy sounds good but you didn’t mention anything about the cut quality

I would love to see a stand on version of this video

Bad boy I like so have a great day see ya bye.

It's crazy how much things went up I bought a ferris is600z in 2019 for $5600 after tax still going strong

Rz hd 54 built like a tank parker hte 10cc pumps.

Scag?

The king is the maverick. I like the ariens apex awsome machine

Bad boy Maverick Briggs and Stratton

Bad boys look cool,but suck the warranty is trash,and I've seen multiple brand new purchases go in a shop with major issues

ZT 2800 hydro drive is not a commercial unit on the EX mark.

Dixie Chopper, Bad Boy or Exmark which 1 would you buy?

Having purchased my '04 Lazer ZHP from one of the local city utility departments in 2016, I've had the years in between to learn the operation, maintenance and repair of my first zero turn mower. It was sitting in a storage building in a puddle of its own hydraulic oil. The local equipment dealer it was originally purchased from and had done all the maintenance and repair on it since had stopped by to have a look at it. They gave a repair estimate of $1700+ for hydraulic system repair. The culprit was the seal on the input shaft had been blown out, most likely due to operator error or abuse, and once the rigidity of the seal was compromised by fluid pressure it lost the contents of nearly the entire system, rendering the machine helpless. The city decided to replace rather than repair so they bought a new Deere, but took them a year to get around to selling the disabled Exmark. Luckily for me I was the first and only bidder on it, and the city clerk gave me a hand written receipt for the whopping sum of $340 without ever hearing it run If I could get it for some low-ball amount I could spend several thousand on it for years to come and still end up smelling like a rose. I submitted my bid and won. I pulled the right side pump out of the machine and took it to the bench. Got it apart and the only thing I could find wrong with it was that input shaft seal was at about a 45° angle on the shaft. Found parts to rebuild the pump by replacing the cylinder, valve plate and the gaskets/seals delivered to our front door for a whole $82. I had a total of less than $450 invested and it was mowing like a champ. In the years since I've gone through bother pumps again, the "maintenance free" spjndles I replaced twice before changing to greasable bearings and installed new zerks. The first and only time it's had a failure since it's been greasable at least once a month for each side. The winter of 2018 I ordered a new Kohler 23HP engine due to the original motor started "making" oil and I gave $1300 for it, delivered to our door. I did the swap and it's been a much more efficient and enjoyable 3 seasons, working on the 4th now. I'm pretty much sold on the durability of the Exmark brand, because my ZHP is like a dang brush hog. I can say that after having mowed several pieces of property that had been vacant for a long time, the entire places hidden under 3-4 feet tall sage grass, Bermuda , clover and orchard grass at the bottom of the jungle in all of them, and it was far from 8-9 mph but it chewed its way through it all, and after the second cutting they all were looking like completely different properties. I haven't used the others but I do know what that old Lazer Z out there in the garage is capable of. That being said, I think I'll stick with the Exmark/Toro brands. Quality products for reasonable prices.

you never comment on cut quality and warranty backing

Bad boy

💪💪💪💪💪💪💪💪💪💪Dixie Chopper

Toyota should start building mowers..

Let's see it climb a steep hill or out of a ditch..like my Craftsman T240 Turn Tight tractor can..

Toro

there is no way the the radias is not the best by far and the bad boy is the worst and if u want to get serios best mower is the toro titan with myride.with the toro motor on back hands down best mower in market in this price range can probaly find 6 other mowers out there that are better than the bad boy junk mower

FERRIS ALL THE WAY…. TRY OFF ROAD(YARD) WITHOUT SUSPENSION…! ENOUGH SAID!

Z422 54 inch deck. $7800 tax included. Boom

Toro titan max is better than all these!

I don’t like the name Bad Boy or the name Big Dog. I think they are both stupid names for a piece of equipment. I’ll stick with my Hustlers.

7000 for a dam lawn mower? Dam tin,plastic,Mowed 50 years and never paid 1000 for any dam mower.you buyers are crazy.suckers hell there is nothing there worth the price.

I wish you included the weight of each machine

here we go again nothing said about the countryclipper ashame on you they are the beast an the best

the country clipper is os easy to run with one hand hey tell then about this mover

Bad boy