He’s not human

maybe he touches the hand of Jhonny sins

Nice

Please dont stop!

I agree with you. One think i not like that much is how he is using his tools. like the anglegrinder without guard, or using the ratchet wrench for opening. And it would drive me crazy when the vice is not fixed to the workbench.

no waifus

Turbos aren't supposed to whistle.. Unless the bearings are shot. They suckkkkk

What I do with the long and pretty much all vids. On mobile 📱, is tap top right on the gear/settings and set playback speed at 2x. To consume twice the content.

not a fan of ASMR. it triggers me and it's annoying.

Can’t believe I watched from beginning to end, great build !

Thanks! Yeah these videos are quite a lot of work.

Hey bro, why wait and get one one day down the road when you can actually go to a scrapyard or a junkyard and find old Beatdown s*** and restore it yourself. I'll tell you a secret. You're talking to the guy that's working on the first flying electric motorcycle that's right I'm working on a project called the hyperbike it's a hubless wheel design a bike that runs on hydrogen you put water in the hydrogen this cell with two tablespoons of sea salt and a tablespoon of zinc. You close the lid you push the button that powers up the capacitor which then causes the hydrogen the cell to start bubbling producing hydrogen when that hydrogen starts producing you then hit the other button on the starter and the combustion engine that's converted to run on hydrogen which is a small 4-stroke engine Flyers off and start spinning for motorcycle stators those skaters then stack power into 4 full farad capacitors which the engines for the Drone flight mode run on so that there is plenty of power to draw from. But it all is powered by a 5-volt phone charger and a dollar store solar panel. I figured out that if you wire the solar panel to the battery nacelle you can charge a regular 5 V cell phone battery nacelle with a 2in by 5 in solar panel from the local dollar stores😅😅😅 that with a 5 volt to 24 volt Step Up allows you to increase the voltage to 72 volts by using a step up in a Transformer from a microwave. I've also taken a 6400 V flashback capacitor which is a line capacitor from a microwave which keeps power from reverberating through your power system cooking your plugs and all that in the wall lol that's installed so if there's any electrical issues the flow of electricity stays constant along with the use of the capacitors. The exhaust from the combustion engine is pure water I've designed a way to catch that water in wicking in the exhaust and have a drain through something I created called The Whistle valve the pressure from the exhaust pushing the water through the whistle valve create enriched hydrogen when the water returns to a catchment tank with a float and a small hydrogen enrichment system similar to the one on the main tank that fuels the bike. When the tank runs low the enrichment tank from the exhaust which is been reading Ridgewood pure hydrogen is pumped into the tank it's almost completely self-replicating. If I could do what I wanted to do with magnets and Mercury I wouldn't need an engine at all but unfortunately every time I try to patent my device they keep denying it and telling me that if I put it out in the public they're going to put me under a prison somewhere. They don't want you guys to know that if you put mercury inside of a copper ball and put magnets on either side it creates a massive amounts of energy so much in fact you can hook that Implement device to a Ford Model T spark gap and put to contacts inside of the box those two contacts will receive massive amounts of plasma energy exchange from the Ford Model T spark Gap when that happens it's like a lightning storm inside of a box. They made it illegal to use one of those Model T spark gaps unsealed back in the 30s why because they knew that if you use that spark gap on a generator you can create free energy for up to 1,000 homes😅😅😅😅 I'm a beast dude I've been studying this s*** for more than a minute you are f****** insane for putting twin turbos on a little bike like that if you're going to do that bro you might as well go big and get a 30-shot bottle of nitrous and put extended travel on it take it to the drag track my friend take it to the drag track

Thanks! Check out the latest build video if you enjoyed this one 👍

Thanks! Will do!

I would like to see that episode 🙂

would be 0 improvement to power, if anything the engine would make less especially with each turbo running off a single cylinder, you can even hear that the turbines are barely spinning

@@thomasodea8381 Even still, it would be a good comparison between stock and twin turbo with or without improvement. It looks like it's making decent boost though.

@@thomasodea8381 Wrong, and comments like this are why Is started posting timed acceleration runs at the end of the video. A Yamaha Virago is a giant turd stock, putting on turbo's with low boost takes it from a giant turd to just a turd. I'm building another twin turbo setup on my GS400 that's going to be GT15 turbo's on a little 400cc bike. But this time, I'm converting the bike to E85 and running 15psi of boost. I'd like it to be able to crack 100 crank HP, which I think with enough boost (closer to 20psi) it could be done. And maybe I'll even throw it on the dyno just to prove clowns like you wrong.

Thanks 👍

Just woke, brought a mug of coffee back to bed and watched this. Fascinating, impressive, confusing, stressful and deeply satisfying simultaneously!! Your filming, editing, production and effective verbal-free narrative on a par with your engineering ingenuity. I got my first and only bike 3 years ago then did beginner and intermediate bike maintenance courses. Just enough to know I know very little! This and your other content a joy (though much of it looks like alchemy and sorcery to this layman!). It’s probably a good thing I don’t live in Arizona or you’d have to take a restraining order out on me to stop my head popping around the corner of your garage door and annoyingly asking “what are you doing now?!” I’ve got the relatively rudimentary jobs lined up of fitting my twin with a 2-1, cam upgrade and updated front and rear shocks, the least of useful lessons learned here being “steady as you go” and “prep your plan”. Thanks so much. 👍🏼✊🏼👏🏼

Lol I just want my bike to run, first off

The spitting fire is intented as signaling lights 🐌 not exactly like mine´s.

For sure, thought the lack of ground clearance was super obvious when cresting hills, lol

i’m in agreement with you on that, because if i had a bike like that, i’d have the exhaust pipes routed down under the frame and exiting out in front of the rear tire

Hehe, forgot I left that in the video.

Ok boomer.

Right on! Draw-through can be difficult to tune, so my best advice is be patient.

Thank you. It's comments like this that make reading criticisms worth it.

Thanks! Check out the latest build video if you enjoyed this one 👍

That's exactly what they're great for is cleaning for engine work, and the big one is sweet because you can fit a rack of 4 carbs and inline four heads in them 👍

No problem Aaron. If you enjoyed this, check out the latest build if you haven't already!

Thanks, must be the mysterious algorithm

Thanks Frank, check out the latest build video if you enjoyed this one!

@@DoctorMotorcycle welcome, alrighty will do