Wall Clock of Wood and Epoxy with LED. Solar Eclipse

  Переглядів 1,037,166

Wood Season

Wood Season

Рік тому

My Shop woodseasonstore.com/
Etsy Shop woodseasondiy.etsy.com
In this video we show how to make a Clock Wood and Epoxy with Led! Clock made of wood and epoxy resin with using xTool D1 Pro 20W laser machine. It can also be done using a wood router. DIY.
If you enjoy this video, Please Subscribe and share.
We are appreciate all of the support.
Laser Engraver Cutting Machine
xTool D1 Pro: www.xtool.com/products/portab...
The following links are affiliate links, it means I get a small percentage at no extra cost to you.
www.xtool.com/?ref=5GW3UDbrx_...
------------------------------------------------------------------------------------
Epoxy Let's Resin Amazon stores:
US Store Resin: amzn.to/3Zprykd
Deep Pour Resin 1.5 Gallon shorturl.at/ahEP1
DE Store Resin: amzn.to/3zjpbof
The discount code WoodSeason is available for stores above with 10% off.
UK Store Resin:amzn.to/4akqR1x
Discount code:10WoodSeason is available for stores above with 10% off.
------------------------------------------------------------------------------------
-Facebook / woodseasondiy
-Instagram / wood_season_
------------------------------------------------------------------------------------
-As an Amazon Associate, I earn from qualifying purchases.-
ATEZR L2 Laser Engraver amzn.to/3XFOTi0
LaserPecker 2 amzn.to/3XCIzba
Vice Stanley 1-83-069 amzn.to/3kJHAHm
DEWALT Table Saw amzn.to/3rUSDgN
Hard Wax Oil amzn.to/3MtTuyz
Wood Glue amzn.to/3enncbX
Compact Router amzn.to/3CWlrvL
Plexiglass Sheet: amzn.to/3Mvqhmw
Chess Molds www.amazon.com/LETS-RESIN-Upg...

КОМЕНТАРІ: 316
@emeraldqueen1994
@emeraldqueen1994 8 місяців тому
Tip : paint well look less streaky on a big surface if your brush is bigger… the one you used in this video is a DETAIL sized brush when you needed a BASE COAT sized one
@dianea8455
@dianea8455 8 місяців тому
Upside down number and more explanation of what you need for the clock I liked it
@-skylord2672
@-skylord2672 9 місяців тому
Watching you painting the stand with these tiny little brush is priceless. 🤣😂🤣
@WoodSeason
@WoodSeason 9 місяців тому
😅
@weaponizedmath4369
@weaponizedmath4369 Місяць тому
And uses a roller to do the smaller staining job
@Krmpfpks
@Krmpfpks 24 дні тому
Edit: removed, wrong thread
@HariniPada
@HariniPada 17 днів тому
This clock is seriously stunning! Love the wood and epoxy combo! 🌟
@markramsell454
@markramsell454 8 місяців тому
Turned out nice.
@joshuabray37
@joshuabray37 5 місяців тому
That's beautiful! Clocks are so fun to make.
@mauriceholder1386
@mauriceholder1386 7 місяців тому
Its even got those fancy superbowl numbers, nice.
@arjumandsaeed6058
@arjumandsaeed6058 18 годин тому
Its beautiful...grt work
@MultiScampi
@MultiScampi 8 місяців тому
Your chisel technique made me nervous, otherwise a great job ,might even have a go myself 👍👍
@peronik349
@peronik349 9 місяців тому
Magnificent ! ! I have heard of a tradition among European watchmakers which would consist of inscribing the hours on clocks in Roman numerals, but with the particularity (reserved for watchmaking) of writing the number 4 not "IV" (5 minus 1) as usual but "IIII" (3 plus 1)
@ArthurvanH0udt
@ArthurvanH0udt 8 місяців тому
YES, and the reason is the balance of the numbers. with iiii we now have 4x number with I then 4x number with V and then 4x numbers with X.
@donmiller2908
@donmiller2908 5 місяців тому
@@ArthurvanH0udt Fascinating
@michaelyork3198
@michaelyork3198 8 місяців тому
The clock is lit!!
@hohenstaufen.1010
@hohenstaufen.1010 8 місяців тому
Looks great 👍🏻👍🏻👍🏻 wel done.
@michele3051
@michele3051 6 місяців тому
Waouwww c’est magnifique !!! Très ingénieux. Bravo et merci du partage 🤩🤩
@diegojosegonzalezcarballo8228
@diegojosegonzalezcarballo8228 8 місяців тому
Excelente trabajo
@annafrixione6713
@annafrixione6713 9 місяців тому
Beautiful original and modern work Bellissimo lavoro e disegno originale
@WoodSeason
@WoodSeason 9 місяців тому
Thank you so much
@GalipUlus
@GalipUlus 8 місяців тому
Ellerinize sağlık çok güzel oldu.💯💢
@ArthurvanH0udt
@ArthurvanH0udt 8 місяців тому
On a clock with roman numbers, the roman 4 is usually depicted as IIII instead of IV. Why? Because of the balance between the numbers. i ii ii iiii (four numbers with just i's) v vi viii viii (four numbers with a V) and ix x xi xii (four numbers with a X). That's how it's done!
@MaxPaws
@MaxPaws 8 місяців тому
No, that’s not why you occasionally see iiii on ancient clocks. The real reason dates back to Roman times and has to do with the original Roman spelling of their God Jupiter, spelled IVPPITER. Using IV was thought to be disrespectful.
@LaszloPalfi
@LaszloPalfi 2 місяці тому
Nope. That's a myth. The real reason was what ArthurvanH0udt wrote.
@fastertove
@fastertove 2 місяці тому
Yes, writing IIII or IV is just a matter of preference.
@jerrysmith3515
@jerrysmith3515 8 місяців тому
Nice idea for a clock.
@carviaso
@carviaso 8 місяців тому
Looks great! I'm curious for the clock machine, solar panel and energi controller. please share the link
@sathishchandra3340
@sathishchandra3340 7 місяців тому
Wow .... Super made...
@luigi131250
@luigi131250 8 місяців тому
Lavoro eccellentissimo, complimenti per la creazione👍👍👍👍
@WoodSeason
@WoodSeason 8 місяців тому
Grazie
@luigi131250
@luigi131250 8 місяців тому
@@WoodSeason Prego👍
@resina_tabasco
@resina_tabasco 9 місяців тому
hermoooooso trabajo
@user-or4hs7xq9u
@user-or4hs7xq9u 7 днів тому
Loved the music at 15:08
@guillepardo4330
@guillepardo4330 11 місяців тому
Y gracias por dar a conocer éstos proyectos muy bacano de Bogotá Colombia
@lesbrewer3105
@lesbrewer3105 9 місяців тому
The LEDs creates a very warm ambience.
@ukie5130
@ukie5130 19 днів тому
Great job on the clock.
@SeaFanStudio
@SeaFanStudio 9 місяців тому
Looks great! I'm curious if you considered filling the clock with epoxy after adhering the numbers to encase the numbers and prevent dust build up? Love the versatility of having a base and being wall mountable.
@jakerazmataz852
@jakerazmataz852 6 місяців тому
That sounds like a great idea. I've never worked with epoxy, but it's probably harder than it seems. You could pour a thin layer of epoxy, let it dry, then attach the numbers. And pour another layer of epoxy over it. I don't know how that works out though.
@user-dz8jl2kf7v
@user-dz8jl2kf7v 4 місяці тому
@@jakerazmataz852 yes use the UV resin to attach the numbers with the uv resin you just put the uv light over it and they will dry with in no time then you can pour the rest of the epoxy over all of it. and let it dry
@blitarwelding
@blitarwelding 8 місяців тому
waow very nice❤❤❤
@SD-ni5xf
@SD-ni5xf Місяць тому
I love this. Gonna try to make something similar!
@jairgoncalvesgomes9874
@jairgoncalvesgomes9874 8 місяців тому
Perfeito lindo Belo trabalho show 🇧🇷🇧🇷👏👏👏👏👏👍🤣😂🚀🚀🚀🚀🚀
@Rebiai
@Rebiai 9 місяців тому
عمل رائع
@NickCombs
@NickCombs 9 місяців тому
You're probably gonna want to turn the light off without stopping the clock and some point. Other than that, very nice!
@Galerak1
@Galerak1 9 місяців тому
Pretty sure the switch is only connected to the solar battery for the lights, the clock itself is powered by the AA battery he put in. I was more curious as to why he put the wall hanging attachment on, up against a wall the light sensor is always going to assume it is dark, keep the lights on and drain the solar battery because it isn't getting any light. But apart from that, yeah, not a bad project.
@NickCombs
@NickCombs 9 місяців тому
@@Galerak1 Hmm, i didn't see a separate battery for the LEDs, but it wouldn't be the first thing I missed. Depending on the color of the wall and the sensitivity of the sensor, it can actually detect light pretty well against the wall. I have a solar battery pack that turns it's charging light on even when it's oriented the same way.
@onthefly1
@onthefly1 7 місяців тому
Stunning!
@Dancopymus
@Dancopymus 9 днів тому
Beautiful thing! Congratulations!
@MultiTimelady
@MultiTimelady 6 місяців тому
I love that clock
@galina1970a
@galina1970a 6 місяців тому
Красивые часы и нечего лишнего нет. Спасибо за видео.
@Paul.Douglas
@Paul.Douglas 3 місяці тому
Beautiful!
@shekharmShekharmshekhar
@shekharmShekharmshekhar 7 місяців тому
Nice super
@RafikMankariosDrumStudio
@RafikMankariosDrumStudio 8 місяців тому
All roman numbers clocks and watches are setup exactly like in this video. The only thing that makes the numbers look akwardly upsidedown are the lines beneath them. If these lines were removed, no one would have commented (or noticed) on the numbers being upside down. AMAZING WORK AND WOODCRAFT!
@ninja-biker
@ninja-biker 6 місяців тому
Nope. The 4 is correct for Roman numerals, but it's wrong for a clock. Traditionally on clocks and watches, the 4 is IIII
@pocketchange3543
@pocketchange3543 Місяць тому
No, no they're not. Most cheap clocks are made like this one. Because they are lazy. The numbers should be set just like standard numbers, upright an level.
@Kenowens54
@Kenowens54 4 місяці тому
Love it. I am curious about the LED lights and the solar/ switch. A description and links for them please.
@marciobatista6952
@marciobatista6952 10 місяців тому
Parabéns obra prima!
@WoodSeason
@WoodSeason 10 місяців тому
Thanks
@sharpstampers5830
@sharpstampers5830 25 днів тому
Very nice n accurate work Sir...👌🤟
@bybeetho
@bybeetho 9 місяців тому
*Maravilha, Espetacular... Beetho, de Belo Horizonte, MG, brasil.*
@Woodworkingaamirabbas
@Woodworkingaamirabbas 4 місяці тому
very best beautiful wood Design
@lucialima781
@lucialima781 9 місяців тому
Lindissimo
@kellyjean4981
@kellyjean4981 8 місяців тому
Nice
@jess65963
@jess65963 27 днів тому
I like it!!!!!
@davidgarciavazquez8619
@davidgarciavazquez8619 4 місяці тому
very good job , it´s amazing
@polycarvalho8288
@polycarvalho8288 6 місяців тому
AMAZING!
@aidasoto2936
@aidasoto2936 8 місяців тому
Hermoso reloj
@Colourwood-epoxy
@Colourwood-epoxy 9 місяців тому
sieht wirklich sehr gut aus und ist eine wirklich gute Arbeit. Aber das Solarpanel auf der Rückseite der Uhr macht gar keinen Sinn. Das bekommt da garantiert nicht genug Sonne ab, um zu funktionieren.
@Krmpfpks
@Krmpfpks 24 дні тому
Im Ständer schon, und an der Wand ist es vielleicht Energierückgewinnung von dem indirekten Licht😂
@Justfreeloading
@Justfreeloading 5 місяців тому
Beautiful
@hil428
@hil428 Місяць тому
Beautiful 👌
@pm-positive-maker4484
@pm-positive-maker4484 25 днів тому
Really great art👌👏😁
@Woodworkingaamirabbas
@Woodworkingaamirabbas 4 місяці тому
my favourite wood design
@dailycorp7186
@dailycorp7186 2 місяці тому
Good job modern style
@user-ru6gq3kr5n
@user-ru6gq3kr5n 7 місяців тому
Чудно. Два в одном.
@danielriva5482
@danielriva5482 5 місяців тому
Bel orologio di design 😊bravo!
@truthseekar
@truthseekar 8 місяців тому
Excellent 👌 But didn't understand light sensor module system ❗😮
@harshabiliangady3211
@harshabiliangady3211 8 місяців тому
Absolutely beautiful. I am from Bharat and YESSSSSSSS I'd have the same concern as @seafanstudio. Love your work God Bless and keep it up.
@danbrit9848
@danbrit9848 8 місяців тому
whats the finish on that table that you can pure epoxy and not have it stick
@SMcCaskill
@SMcCaskill 5 місяців тому
Great idea!
@weaponizedmath4369
@weaponizedmath4369 Місяць тому
Very cool effect
@chadergeist
@chadergeist 25 днів тому
Nice! I would have left more room for you to get the battery out from the positive end.
@waltwhybrewwoodworking
@waltwhybrewwoodworking 5 місяців тому
Nicely done
@furniturekagharorsofacente1844
@furniturekagharorsofacente1844 4 місяці тому
❤ nice work
@marshallguerra1353
@marshallguerra1353 3 місяці тому
Very cool and nice
@Guadamo1
@Guadamo1 9 місяців тому
❤cool
@murilotamari4709
@murilotamari4709 6 місяців тому
Is beautiful
@dailybase5145
@dailybase5145 6 місяців тому
Amazing
@Akira_torres
@Akira_torres Місяць тому
Hermoso ❤❤❤❤❤
@carlosaugustosoutopimentel6779
@carlosaugustosoutopimentel6779 6 місяців тому
Show de bola parabéns 👏👏
@pauloribeiro2692
@pauloribeiro2692 6 місяців тому
Top 10!!!
@sharonwarden3502
@sharonwarden3502 6 місяців тому
That is very good
@davoodtaherkhani3792
@davoodtaherkhani3792 6 місяців тому
That's good 💯
@user-dz8jl2kf7v
@user-dz8jl2kf7v 4 місяці тому
i love this i want to make one , but i don't know all the materials you had and used, but is there anyway to put the lights inside the clock and then put the epoxy in it
@tayebrahmani3012
@tayebrahmani3012 3 місяці тому
Thank you
@wjp255
@wjp255 Місяць тому
A good video. Thank you. Gives me some ideas.
@JuniorPizzoPizzo
@JuniorPizzoPizzo 2 місяці тому
Fera 👏👏👏 ganhou mais um inscrito
@Woodworkingaamirabbas
@Woodworkingaamirabbas 4 місяці тому
your all video very nice
@fbasen57
@fbasen57 5 місяців тому
How long is the curing for the epoxy to harden itself ? Is it also temperature dependant ? I have so many failures on epoxy attempts even for small amount take few days it still flexy and sticky 😢
@tanujain7133
@tanujain7133 2 місяці тому
Hi its very unique idea nice❤ would you be so kind to assist what base you use underneath rings to fix them before pouring resin? And what colour you have use on both wodden rings? Its colour or varnish?
@Talia778real
@Talia778real 2 місяці тому
Wow❤
@FA22_RaptoR
@FA22_RaptoR 6 місяців тому
Super cool clock, the eclipse effect was really nice! Anyone know what the song at 7:25 is? I looked up the 4 credited songs and it wasn't there, it's in between "Night Snow" and "Joker". Thanks :)
@user-ev3ni7pk3d
@user-ev3ni7pk3d 5 місяців тому
Самое интересное , как он деревяшку красил !
@laborges4535
@laborges4535 3 місяці тому
Excelente trabalho, única ressalva a colocação dos números. Se você pendurá-lo na parede metade dos números estarão de cabeça para baixo. No mais, coisa linda de se ver, parabéns!
@km290873
@km290873 9 днів тому
Schöne Uhr. Allerdings hätte uch die Zahlen unten in die andere Ruchtung gedreht und mit eingegossen. Dann wäre die Reinigung einfacher beim Staubwischen
@azucenziaflanders594
@azucenziaflanders594 6 місяців тому
So I learned something today...
@bettyvancott5282
@bettyvancott5282 4 місяці тому
Wear a “headband light”. Much easier when routing!
@notinmanitou
@notinmanitou 7 місяців тому
Cool idea, did you ever fix the upside down numbers?
@jamnjef1
@jamnjef1 6 місяців тому
they are supposed to be upside down
@Penopedia
@Penopedia 4 місяці тому
What to do to prevent resin stick to other things?
@karlamiranda9278
@karlamiranda9278 9 місяців тому
Pro💪
@WoodSeason
@WoodSeason 9 місяців тому
Thanks
@dons5885
@dons5885 6 місяців тому
Question: How often do you have to replace the battery?
@Woodworkingaamirabbas
@Woodworkingaamirabbas 4 місяці тому
thank you watch clock wood ideas
@quietspacearts
@quietspacearts 7 місяців тому
wow
@celmad8249
@celmad8249 7 днів тому
Há é o meu sonho em ter um relógio ⌚ assim lindo
@magicwoood
@magicwoood 5 місяців тому
Perfect 🌹🌹🌹🌹
@josearaujo4468
@josearaujo4468 3 місяці тому
Muito lindo
@christopherjenkins6154
@christopherjenkins6154 8 місяців тому
Great little video but get a bigger paint brush
@michellucien9367
@michellucien9367 6 місяців тому
Belle réalisation, mais pour la lumière il y a un problème, la cellule photovoltaïque étant à l'arrière de la pendule il y a de fortes chances qu'elle reste toujours allumée et donc la pile ne va pas durer longtemps
Made some clocks. How to make clocks from wood and epoxy resin
13:13
Lost Wood Style
Переглядів 82 тис.
5 Ways to Get Bubbles Out of Resin | Resin ART
8:37
BuzzingFish
Переглядів 3,8 млн
Voloshyn - ЗУСИЛЛЯ (прем'єра треку 2024)
06:17
VOLOSHYN
Переглядів 371 тис.
McDonald’s MCNUGGET PURSE?! #shorts
00:11
Lauren Godwin
Переглядів 31 млн
одни дома // EVA mash @TweetvilleCartoon
01:00
EVA mash
Переглядів 5 млн
Eurovision Song Contest 2024: First Semi-Final (Live Stream) | Malmö 2024 🇸🇪
2:23:45
Deep Dive with Laser Dave - Epoxy Resin and Lasers
12:56
Trotec Laser USA
Переглядів 138 тис.
Great Woodworking Ideas /// Design A Wooden Globe  Desk Clock.
18:31
Transforming Glue Sticks Into Rain & Storm Lamp | DIY Project
8:23
Totally Handy
Переглядів 4,4 млн
Epoxy resin clock 30 cm. Black with silver. Resin Art.
8:03
Resin Art Mary
Переглядів 179 тис.
How to make easy ocean waves effect using epoxy resin - full tutorial
17:51
Pour Me A River
Переглядів 1,1 млн
DIY Wood & Resin Clocks Using Clock Router Templates & Silicone Molds
32:47
Crafted Elements
Переглядів 39 тис.
How to make your resin crafts like a glass clear
7:26
Cre_ Arth
Переглядів 2,9 млн
#1685 You Won't Want To Miss This Incredible NEW Resin Technique!!!
19:16
Pouring Your Heart Out
Переглядів 681 тис.
Make A Laser Engraved Resin Inlay on Bamboo or Wood Cutting Board #resindiy
8:21
Elephant Memories by JoBeMac Studios
Переглядів 122 тис.
Как выявить причину жора масла самостоятельно?
0:32
Кирилл Цыбулин | Автоподбор
Переглядів 3 млн
Правильний ШАШЛИК на Великдень👌👌👌
0:27
Igor Shpigunov
Переглядів 258 тис.
Кажется, уже узнали
0:27
Хорошие Новости
Переглядів 5 млн
Good teamwork?
0:23
Den Done It
Переглядів 23 млн