Watch How I Transform this Wrecked Honda Into a Custom Motorcycle! - Full restoration

  Переглядів 3,256,485

Meanwhile in the Garage

Meanwhile in the Garage

11 місяців тому

Download and Play World of Tanks on PC : tanks.ly/3LJGiW5
Name: COMBAT (Value : approx. 25$)
Invite code - Only available for the PC version
It contains:
Premium Medium Tank: Cromwell B (British _ Tier 6)
7 premium days
250 000 credits
10x battles offered to test the following Emblematic Tanks (Rental)
Tiger 131 (German) Heavy Tank
T78 (UK) Tank Hunter
Type 64 (U.S.S.R) Light Tank
Thanks World of Tanks for promoting the video!
Dear Friends,
I've always been fascinated by motorcycles for a long time. However, due to the eternal routine of work, home, and family, I never had enough time for this hobby. Motorcycles have always been on my mind, just like airplanes. I had my own concept of what a motorcycle should be like and how it should look.
Finally, I got the chance to pursue my passion. I got my motorcycle license so that I could enjoy riding. As soon as I started riding, my long-held thoughts and ideas began to surface. I couldn't shake off these persistent thoughts. Images of my future motorcycle kept flashing before my eyes. It was meant to be. I had to create my own motorcycle. In the end, I decided to turn my idea into reality.
In this video, I will share with you the process of materializing my long-held dream into reality, creating of futuristic motorcycle. You can be a part of this journey. I am thrilled that I managed to turn my long-standing dream into a reality. I would be extremely grateful if you could share your opinion. I'm curious to know if our tastes align.
Lastly, I would like to express my gratitude to the organizers of the MotoMinds Kortrijk motorcycle show who gave me the opportunity to showcase my motorcycle to the world.
By the way, stickers were made for me by / stickerfabrik24
Thank you so much, my friends.
Best Regards,
Meanwhile in the Garage
#custombike #diybike #diy #diyproject #futuristicmotorcycle
@WorldOfTanksOfficialChannel
@HondaMotorcyclesEU

КОМЕНТАРІ: 3 100
@meanwhileinthegarage
@meanwhileinthegarage 11 місяців тому
Download and Play World of Tanks on PC : tanks.ly/3LJGiW5 Name: COMBAT (Value : approx. 25$) Invite code - Only available for the PC version It contains: Premium Medium Tank: Cromwell B (British _ Tier 6) 7 premium days 250 000 credits 10x battles offered to test the following Emblematic Tanks (Rental) Tiger 131 (German) Heavy Tank T78 (UK) Tank Hunter Type 64 (U.S.S.R) Light Tank Thanks World of Tanks for promoting the video!
@vispa-dz
@vispa-dz 11 місяців тому
❤❤❤you are the best
@humanspirit3432
@humanspirit3432 11 місяців тому
Very cool : D I like this design : D
@franciscoisaachernandezcha7752
@franciscoisaachernandezcha7752 11 місяців тому
Yo ya tengo cuenta de World of Tanks, pero mis amigos no tenían, ahora ya me superan en ventajas jaja, ahora jugamos bastante gracias por el código de invitación, te ganaste un nuevo subscriptor jsjsjs
@wesleypollard3058
@wesleypollard3058 11 місяців тому
What did this bike start out as?
@sargera1
@sargera1 11 місяців тому
please add subs
@claudiolebandit9408
@claudiolebandit9408 11 місяців тому
Effective, no bla bla, just pure imagination. You re so talented. Bravo
@swenak
@swenak 11 місяців тому
And that whistling...:)
@thomashebert5907
@thomashebert5907 9 місяців тому
..plus pure ability
@B.N811
@B.N811 7 місяців тому
Talk less do more 😅
@HITLER-PRO-MAX
@HITLER-PRO-MAX 11 місяців тому
*_Despite the lack of equipment, this person is creative and deserves support_*
@dirtygarageguy
@dirtygarageguy 11 місяців тому
Are you stoned?
@okulodedio5766
@okulodedio5766 11 місяців тому
His creativity is, what makes some equipment obsolete.
@czarekp3552
@czarekp3552 10 місяців тому
he'll get one if he's lucky after that headstock eventually breaks off.... life support
@Delawiz
@Delawiz 10 місяців тому
That garage to me is an overkill
@NewHopeForDirectSale
@NewHopeForDirectSale 10 місяців тому
​@@DelawizBut this is his place of work, so don't be stupid and exaggerate only from your imagination
@SL4PSH0CK
@SL4PSH0CK 7 місяців тому
**Keanu Reeves wants to know your location**
@meanwhileinthegarage
@meanwhileinthegarage 7 місяців тому
He's welcome at our garage))
@vlweb3d
@vlweb3d 5 місяців тому
... and buy his bike.
@griparian
@griparian 6 місяців тому
For a man who loves bikes but who doesn't have a shed or access to loads of tools or lathes, watching you work is so satisfying...lol
@bearde_mut9731
@bearde_mut9731 Місяць тому
He walks past a lathe at around 8:27 minutes into the video.
@waqarghulam3548
@waqarghulam3548 11 місяців тому
I have seen this video several times and I can’t get this bike out if my mind. The proportions, the stance, the rake angle, the seating position all seem to be how the perfect bike should be. I have not seen a better rendition. I must appreciate the genius of this man.
@nunafanai405
@nunafanai405 10 місяців тому
Same
@RaksasaMentawai
@RaksasaMentawai 10 місяців тому
Here here...
@raelik777
@raelik777 10 місяців тому
It is absolute genius. WAY better looking than the original ST1100 (Looked too much like a GoldWing, though the original flat-4 goldwings without the fairings were sick), and probably better balanced too. I don't think there is a better looking transverse V4 bike out there.
@_Lazare
@_Lazare 10 місяців тому
Beautiful I’d buy it :)
@centralbiz5974
@centralbiz5974 10 місяців тому
this russian fellow is carismathic and can ACT as well ! outstanding
@zxccmn
@zxccmn 11 місяців тому
Now no one can be impressed by the high quality of workmanship or the use of new technologies or the enormous laboriousness of the work, but you do it simply by improvising, easily and naturally like a jazzman👍
@meanwhileinthegarage
@meanwhileinthegarage 11 місяців тому
I'm glad that you liked my work
@MrGerryoc
@MrGerryoc 11 місяців тому
Ugly
@joriss3130
@joriss3130 7 місяців тому
The self invented tinkerer of the highest level. Love the design and the way you invented the whole concept.👍 it's great to see how your relative simple shop can accommodate all your creative needs. Keep up the fantastic work!
@Troupe_Master
@Troupe_Master 7 місяців тому
This should be mass produced
@killer1963daddy
@killer1963daddy 6 місяців тому
Instead it's mess produced...😢
@TheDigitalHombre
@TheDigitalHombre 11 місяців тому
I like the way you find solutions, now put a little more effort into the final finishing touches like the gaps and pop rivets. But one thing I find downright dangerous is the way you welded the front end. You should have used an insert for this and first welded it through a drill hole before mounting the new piece. And use high tension steel for this. Because you moved the front wheel forward, the whole machine is also lowered at the front. That's why the bike now falls over so quickly when you push it. You may have to adjust the jiffy and central position a bit to avoid annoying situations. As a former Pan European rider I'm sure the original bike will ride better, but I did enjoy your build video!
@ViralM0
@ViralM0 11 місяців тому
Exactly 🫡🫡
@tigerstripes3926
@tigerstripes3926 11 місяців тому
​@@ViralM0 nort goord
@alihenderson5910
@alihenderson5910 11 місяців тому
The most ghetto head rake I've ever seen 😂
@devilpen6565
@devilpen6565 4 місяці тому
I have watched this modification video twice. Your thinking and methods are like a fashion tailor. Your heart must be very warm. This motorcycle touches the heart of the rider. Greetings from Taiwan.
@125varma
@125varma 7 днів тому
Man, I'm an Engineer and I am nothing compared to you! I wish I had half the skills you have! You're awesome!
@greliusz
@greliusz 6 місяців тому
This bike is glad you saved it from being scrapped. You gave her a second life!!
@pevcraft
@pevcraft 10 місяців тому
Very inspirational. The talent to realize the imagination. No fancy CAD drawing or modeling, just build whatever straight out of head 👍
@lemonjellies4985
@lemonjellies4985 10 місяців тому
Your workmanship is raw and honest. Your talent is just as brutal. Honestly, if I was Honda, or another brand, I would take good notice of what you've done here. It's a concept that could be very appealing on a production muscle bike. I know I would buy one for sure.
@antonkadantsev7737
@antonkadantsev7737 4 місяці тому
The work is astonishing. The fact that in this day and age you can design your own vehicle, record it, then put it out for the world to see is incredible. 👍
@cornwallav8r
@cornwallav8r 5 місяців тому
I've built several aircraft, including a Rotorway helicopter which I still own. Aside of that headstock welding, I'm truly impressed. He doesn't sweat some of the little fit and finish details, which help get a great project done so much faster. I've god a buddy like this, he designed and built his own helicopter from scratch with a Subaru engine, we have flown together a few times. Genius is impressive.
@namtech425
@namtech425 10 місяців тому
That running back and forth between workshop and hardware store we can all attest to. Good job man - I love the look of this.
@slash11lipo
@slash11lipo 10 місяців тому
For me, this guy is more impressive than a heart surgeon. His skill and creativity is off the charts. Glad I found his channel.
@shamirkhan1703
@shamirkhan1703 4 місяці тому
Love your patience and calmness. I think that's where you find your creativeness. Amazing build from just improvising from everyday items. Cant wait to see the next one!
@JoeGP
@JoeGP 5 місяців тому
I really liked the way you showed how you tackled each part, most TV shows where they build stuff make look more complicated and confusing, however you video makes people think they can do it too, so it's very confidence inspiring. It's a shame stuff like this is illegal in my country.
@FutureEon
@FutureEon 11 місяців тому
Your creativity and skill shine through in this project. It's refreshing to see a video that focuses on the transformation without unnecessary chatter. The way you turn a wrecked Honda into a custom motorcycle is truly impressive. Bravo to your talent and craftsmanship! Can't wait to see more amazing transformations. 👏🔧🏍
@erfan_st
@erfan_st 9 місяців тому
If there was an award or a badge for the most creative man of the year, without a doubt this badge and award should be yours 👏🏻👏🏻👏🏻 You really did a great design and execution 👏🏻
@ChristopherMoye
@ChristopherMoye 7 місяців тому
Oh my days those welds on the front end sure are something. You are a braver man than I to ride that thing on the roads.
@heizeisen_ch
@heizeisen_ch 6 місяців тому
Like what you have done! Now you have a unique piece, it doesn't matter if somebody doesn't like it. It's your work and it's special!
@AlihanAmhadov
@AlihanAmhadov 11 місяців тому
Ма шаа Аллаh ) Дала т1аьхьи беркати йойла ! Хаз болх бина )
@meanwhileinthegarage
@meanwhileinthegarage 11 місяців тому
Амин, вай массер.
@rusticraver82
@rusticraver82 11 місяців тому
The design of this thing is absolute genius. I want to own a bike that looks exactly like this one. Motorcycle manufacturers need to take note.
@TheNoxdbx
@TheNoxdbx 8 місяців тому
same here!
@vladimirgolovashchenko2044
@vladimirgolovashchenko2044 8 місяців тому
Спасибо алгоритмам UKposts за то что показали мне это видео! А теперь по самому видео. Никакой лишней болтовни и кадров, самые основные и нужные моменты. Видеоряд подобран шикарно! Аплодирую мастерству автора создавать дизайн из голову, прям на ходу ))) Видно как автор с любовью вкладывается в эту реставрацию. И отдельно хотелось бы отметить невероятно добрые глаза! Всем ровных дорог!
@AslanBeck
@AslanBeck 6 місяців тому
И это не единственные таланты двух братьев: Одаренные ребята
@Gappo88
@Gappo88 6 місяців тому
​@@AslanBeckсалам алейкум А кто они , откуда ?
@stevesomers7366
@stevesomers7366 7 місяців тому
I'm impressed with what you've done with your own hands! I ride a Goldwing and have done a lot of my own maintenance and refurbishment on my bikes. I appreciate the talent you have exhibited here. Best of luck. Cheers!
@TankToChest
@TankToChest 11 місяців тому
The secret to a great finish is to wait to paint everything and then send everything at once to a powder coater for everything black. Paints cool but the powder coating will always look super professional. As well as anodizing.
@shaftdrive7567
@shaftdrive7567 10 місяців тому
Impressive AF. Great thinking behind design. Really loved the fairing's frame. 👌🏿 Also loved the humble approach, the human errors and the pure resilience and persistence which made this an exhibition-standard project. Cheers, well done, riveting vid.
@nicolasguiot1766
@nicolasguiot1766 7 місяців тому
incredible job ! with a very few tools ! your sir have all my respect and deserve much more visibility !
@marshallbananas9383
@marshallbananas9383 11 місяців тому
I just love how ingenious and practical his workmanship, and how resourceful he is with the materials, what a master craftsman you are. Love here from the Philippines!
@ErickBuildsStuff
@ErickBuildsStuff 11 місяців тому
As a kid, I imagined such a bike but you brought it to reality. Awesome job.
@mattsouth831
@mattsouth831 6 місяців тому
So relaxing to watch but then so intense at the same time. Great design and craft and ship!
@cancergamingunicorns1586
@cancergamingunicorns1586 9 місяців тому
The talent and skills this guy have is unbelievable.
@nicgurkweitz389
@nicgurkweitz389 11 місяців тому
It definitely gives you that "I can fly" look. I love this build. Can't wait for the next!
@ridethroughlifertl
@ridethroughlifertl 11 місяців тому
Man that rake angle transforms the bike. I had a 1996 ST1100 and loved it. They're such great bikes.
@Lelouch69
@Lelouch69 7 місяців тому
Bro took a beast and created it into a legend , Hats off Brother
@verglasviq
@verglasviq 9 місяців тому
Hammering the threaded nuts inside the pipes is such a legitimately great hack! I need to try and remember that for my builds.
@dikfeniks7801
@dikfeniks7801 11 місяців тому
Этот чеченец изобретает и делает своими руками очень многое .Жаль что он на чужбине . Молодец !!! Очень талантливый парень !!! Аллах1 Дала аьтто бойла хьа !!! 🤔👍👍👍
@meanwhileinthegarage
@meanwhileinthegarage 11 місяців тому
Амин, хьаъ бойл са Ваш
@evlo1785
@evlo1785 15 днів тому
Амин
@venveror1349
@venveror1349 11 місяців тому
I honestly believe that you have a good facility for improvising and looking for solutions, even if they are not perfect, but you do it very well... What I cannot ignore is the deformation to which you have subjected the chassis after forcing it with the hydraulic jack and later those extension tubes with those weak welds, which what it does is dangerously weaken the chassis. Keep in mind that it is a heavy motorcycle that reaches more than 200 km/h. "It is my opinion". For everything else, "good job"
@dariuszchlebowsky253
@dariuszchlebowsky253 11 місяців тому
To jest konstrukcja pod potrzeby filmiku, realnie ten motocykl się rozleci do tego był celowo rozkręcony, facet zniszczył dobry motor.
@PutinosauRUS
@PutinosauRUS 10 місяців тому
Such procedure probably will work on a 14 kg MTB but not on a 200+ kg motorcycle
@ItsDaJax
@ItsDaJax 7 місяців тому
I like the build process, especially the use of rivets.
@leenonolee4629
@leenonolee4629 7 місяців тому
I love that eye popping look of surprise when it fired up! Gotta love that powerful sound!
@patrickswagger
@patrickswagger 11 місяців тому
Good wishes from America, I'm so impressed over your craftmanship Sir. you're amazing person to watch make a masterpiece from nothing.
@Jeffy2n
@Jeffy2n 8 місяців тому
First off, I not only love your ingenuity, but also your resourcefulness. Anyone can open a catalog and buy ready made add ons for there bike, but you recycled and made your own parts to make this bike one of a kind and your own. The only thing I would add is a fly screen to keep the wind off your body some. By that's just me. Good work, can't wait to see your next project.
@adrianrees2941
@adrianrees2941 7 місяців тому
Awesome work. Your imagination and engineering skills have come together to create a one of a kind bike that is amazing! If I could, I’d buy one!
@CrazedCrittic
@CrazedCrittic 11 місяців тому
Nice build. As a previous owner of a Pan European you have finally fixed the heat problem that is normal with these bikes :)
@Priestonwheel
@Priestonwheel 10 місяців тому
Impressive job and skills!! The use of flat rivet give the bike an airplane look! Fantastic! The best is you show how do complex design without millons on dollars on tools or complex CNC machines. Old school, metal, patience and knowledge. Congrats, man!!!
@Shayamalam
@Shayamalam 8 місяців тому
Wow, that's amazing how you are able to improvise and create everything new! It was great fun and very inspiring to watch how you built the bike with the unique n´cool design! Keep it up man! :)
@nallemanstankarochfunderin5962
@nallemanstankarochfunderin5962 6 місяців тому
Impressive stuff this. Love your creative thinking and execution. Will really look forward to see more from you in the future.
@cjming
@cjming 10 місяців тому
Love your video, wish I have all the equipments you have in your workshop. As a hobbyist DIYer who loves working with sheet metal, I am amazed how you can confidently eyeball and manually manipulate the workpiece and get it fit 99% well on first try . I don't think I could never achieve that level of skill. Most of the time I 'll either screw up the alignment or fitting of the workpiece no matter how many times I measured and prep.😅
@galaxytab5998
@galaxytab5998 11 місяців тому
оставлю ёмкий и содержательный комментарий, приятно видеть когда у человека руки не для скуки. когда все действия осознанные (монтаж рулит) и картинка на экране не отпускает ни на секунду. все 52 минуты внимательно смотрел, можно подумать что собираюсь повторить что-то подобное (конечно же нет). Рукожопам только и остается, что впечатляться навыкам, упортству и разносторонним талантам нашего гаражного мастера!!!
@mirokokos3617
@mirokokos3617 2 місяці тому
That is a WOW transformation and the final design just matches character of the bike.
@aaronrattley8580
@aaronrattley8580 5 місяців тому
I really really like the mixed analog and digital display. Originally I was gonna talk about the cool Star Wars look of the body, but the dashboard stole the show for me.
@mygaragmme
@mygaragmme 11 місяців тому
simply beauty and masterpiece
@c.8778
@c.8778 11 місяців тому
Это просто восхитительно. У мастера золотые руки! Снимаю шляпу за настойчивость и трудолюбие!
@ziapchoppy5846
@ziapchoppy5846 8 місяців тому
Imagination,calculation and talent is equal to beautiful work
@thedarkknight1971
@thedarkknight1971 7 місяців тому
44:12 - NOTE!!! - IF you work on your bike while it is on centre stand etc) LOCK THE FRONT BRAKE ON WITH CABLE TIE/ELASTIC BAND/TAPE!!! I suffered the same kind of issue once, and soon learned that locking the front brake on DOES HELP! Lucky for you your freshy painted beastie didn't suffer any damage 🤞👍 😎🇬🇧
@bgaraujo21
@bgaraujo21 11 місяців тому
That master piece is insane! Looks like a combat chopper, and a bit like Akira's motorcycle. Congratulations about all that master work!
@adrienberteaux8716
@adrienberteaux8716 11 місяців тому
Great idea for a next MWIG’s project : Akira bike 🤩 , nothing is impossible for a brave man with a beard 👌🏼
@zatoichi101
@zatoichi101 8 місяців тому
Excellent build!!! So awesome!!!! (My heart sunk when the bike tipped over -- but awesome crash guards saved the day!!)
@tonyhammer3588
@tonyhammer3588 9 місяців тому
Holy Caveman, Batman. The quality of work is PRIMITIVE.
@mazedulislam2948
@mazedulislam2948 6 місяців тому
i really admire your hard work and dedication. keep up the good work
@paulcadic1285
@paulcadic1285 10 місяців тому
Brother... Just WOW !! No words, keep doing what you're doing, your builds are truly amazing/mind blowing... Congratulations 👏🎉
@ByronTexas
@ByronTexas 9 місяців тому
I usually fast forward through these things but I was afraid I’d miss all the genius stuff you’re doing!
@vgnhdhe
@vgnhdhe 7 місяців тому
same
@kmoecub
@kmoecub 7 місяців тому
This is a very nice ST1100 build. In the future, use a ratchet strap between the center stand and the rear of the frame to keep the stand from collapsing.
@gas4106
@gas4106 8 місяців тому
Потрясающая работа как говорят у нас в странах бывшего СССР.Мотоцикл-пушка,бомба,ракета!Получил много удовольствия, всем мира!!!
@user-ds3mn8oj2t
@user-ds3mn8oj2t 11 місяців тому
Инструменты почти все сделаны своими руками, все творения неординарны и уникальны, человек который действительно талантлив и трудолюбив. Такие люди двигатель человечества.
@silviodiogo5077
@silviodiogo5077 11 місяців тому
Melhor comentário 👏👏👏👏👏👏👏
@mattjalinho1022
@mattjalinho1022 11 місяців тому
A very beautiful remade machine.. congratulations to MWIG full of love from Malaysia 🇲🇾
@drericshannonparr
@drericshannonparr 8 місяців тому
Attack where it ..leans. Perfect execution, brother. Classic meets slight neo-Cyberpunk.
@alexchainey.
@alexchainey. 7 місяців тому
If the Teutuls and OCC had this guy, they ‘d still be in business.
@rysulrohan
@rysulrohan 10 місяців тому
My man, that looks like a deluxe version of any biker's dream of what he could get from his imagination 🖤🔥 You nailed it 👍👍
@aK1baby
@aK1baby 10 місяців тому
it always puts a smile to my face and gives a great time, when someone just takes his dream to reality. well done! i see ppl arguing about quality, but to be honest i don't think it matters. you let your dreams come true and that's more then most of us can achive in one way or the other. congrats, keep it going :)
@victorjoseph2260
@victorjoseph2260 7 місяців тому
Such an Iconic design! Great work brother 👏 love your job ❤ Can't wait to see the next bikes craftsmanship. God bless you!
@modernart86
@modernart86 8 місяців тому
Bro! This video was top notch from start to finish. Loved every second of it. And that bike… hoooweeeee, that ended up being a sweet custom ride. You gave me inspiration to bring back my bike to life with a custom build. Love your work dude!
@DancerOfClouds
@DancerOfClouds 10 місяців тому
You Sir are a genius. That bike turned out amazing. The lines were perfect. I can only imagine the number of people who wanted to know more about it? I expect to see "copycat" builds now. long live MWIG
@leklek6181
@leklek6181 11 місяців тому
Супер!!!! очень красивый проект!!!! и я рад за своего земляка с таким невероятным талантом!!! 😍🤩😍жду новых проектов!!! всех лаг!!!
@doctorjota4793
@doctorjota4793 7 місяців тому
Impresionante trabajo! Espectacular, vaya proyecto bonito y qué manera de trabajar. Un diseño único y futurista! Enhorabuena! Saludos desde España🇪🇸
@jimisizzle9868
@jimisizzle9868 7 місяців тому
Super cool. A build this innovative deserves a professional paint job my friend. 🙂
@user-hr8cr7rs6n
@user-hr8cr7rs6n 11 місяців тому
Круто,а сколько терпения,упорства,нервов.....,молодец мужик,похвально.
@LeoReo88
@LeoReo88 11 місяців тому
There is no way anyone would see this bike and not say "wow" 😍😍 it literally comes out of your mouth instinctively! Amazing machine, its not just a unique custom bike but also very practical... I mean look at it, it even has pillion seat 😅😅 Awesome project 👍🏻 I hope you take in demands as well if they come in your way in near future 😜😜
@cedrickroberson1017
@cedrickroberson1017 6 місяців тому
I always forget how much I love watching this guy's videos
@MVA6195
@MVA6195 5 місяців тому
E eu aqui do BRASIL 🇧🇷 dando os parabéns pelo excelente trabalho 👏👏👏👏👏👏👏👏👏👏👏👏👍👍SUCESSO SEMPRE!!
@narc1408
@narc1408 11 місяців тому
I love how you explain things!
@mikedobkin7548
@mikedobkin7548 10 місяців тому
I simply loved watching your transformation of the Pan European. I was impressed by your ingenuity and imaginative ways that you used your basic hand tools in ways that I hadn't thought of. I have subscribed to your channel and look forward to the next .👍👍👍
@alencarmanoel3838
@alencarmanoel3838 6 місяців тому
Belíssimo trabalho, lindo mesmo, a moto ficou um espetáculo, dinâmica idealizado e estilo do transformador! Isso chama se identidade! Parabéns pelo belo trabalho!
@thedude8046
@thedude8046 7 місяців тому
Absolutely beautiful bike man, you sir are a true craftsman!
@broderp
@broderp 11 місяців тому
I'm really liking the overall look. Thinking of manufacture and weight, I think you could improve the power to weight ratio with polymer panels, also improve the streamlined look, unless a riveted utilitarian look was your goal. This was very cool to watch.
@Z28Power95
@Z28Power95 9 місяців тому
She's gorgeous!!! 🤩 Your work is amazing! Wish I were as lucky with the tip overs...will definitely invest in frame sliders after seeing this. Thanks for sharing!
@mr.electronx9036
@mr.electronx9036 19 днів тому
This has some amazing F-18 look...the best looking ST 1100 so far. Fantastic work👍
@HOVREDDY
@HOVREDDY 8 місяців тому
Looks like a bike that came straight out of a Japanese Manga, Akira comes to mind. Or even a movie such as Batman. I like the military touches, it matches the toughness of the build. Fantastic work!
@Lekka123
@Lekka123 11 місяців тому
Вашему терпению можно только позавидовать... Браво маэстро
@hansweyers8674
@hansweyers8674 10 місяців тому
This man is truly an artist! Greatings from Belgium !
@sean_miller
@sean_miller 7 місяців тому
The end result is way cooler than it has any right to be. Well done.
@paranormalskyhunter
@paranormalskyhunter 7 місяців тому
i love the desgin. the headlights really pull the lines to the eye.
@KarmaCadet
@KarmaCadet 11 місяців тому
very cool, I love your motorcycle! I can't wait to see your aircraft made from that BMW... flying motorcycle zoom zoom
@MMiler
@MMiler 11 місяців тому
What an amazing design it turned out! 😮 Congratulations on the project!
@kevingrandke6075
@kevingrandke6075 8 місяців тому
I like this setup paint is outstanding and the look is phenomenal! Great work Sir!
@toastycarp
@toastycarp 7 місяців тому
I know nothing of motorcycles, that being said your motorcycle looks badass
@philpopeye
@philpopeye 10 місяців тому
with a better finish (especially painting and welding) you could be at the same level than other international well known builders... but you would be just one among others. What is really special with you and your work is that you don't take it too seriously, with shiny tools and workshop or licked videos and images. Your creativity has the n° 1 place, And it is so good to watch it. Thanks!
Honda GL650 Cafe Racer FULL BUILD TIMELAPSE
25:44
Brick House Builds
Переглядів 3,2 млн
DIY Hoverbike: Motorcycle Modified for Flight
1:26:30
Meanwhile in the Garage
Переглядів 1,5 млн
😱СНЯЛ ФИКСИКОВ НА КАМЕРУ‼️
00:35
OMG DEN
Переглядів 1,2 млн
You’ve Never Seen A Race Like This 🚀
00:21
Red Bull
Переглядів 44 млн
Restoration Of An Abandoned Ducati 748 SPS - Genuine Barn Find!
1:05:41
RRC Restoration
Переглядів 4,9 млн
I Bought the MOST Expensive V Twin Motorcycle on Amazon
24:38
Bikes and Beards
Переглядів 13 млн
Wrecked And Rusted JUNKYARD Motorcycle Sitting 60 Years!
44:57
Wheels Through Time
Переглядів 1,1 млн
1975 Honda 1000cc Motorcycle Sat 25+ Years Untouched
57:39
2vintage
Переглядів 1,1 млн
Yamaha Virago XV750 Cafe Racer FULL TIMELAPSE BUILD
33:14
MotoW
Переглядів 4,6 млн
Платье за 100 000 рублей своими руками
1:00
Настя Бруно
Переглядів 3,2 млн
Когда папа - ТРЕНЕР!😃 inst: psawkin
1:00
Petr Savkin
Переглядів 1,7 млн
Вьетнамские рыбаки убегают от приливной волны
0:11
Короче, новости
Переглядів 7 млн
когда одна дома // EVA mash
0:51
EVA mash
Переглядів 5 млн
Самая Бесполезная Работа в Мире
0:38
Инновационные свечи
0:18
Брин о бизнесе
Переглядів 3,5 млн