Why This V12 Sounds Better Than a $5,000,000 Pagani

Рік тому

Watch the Greatest(!) Exhaust Video in History with the finished 12-into-1 headers here: • How to fix the WORST s...
Checkout the Engine Simulator: / @angethegreat
For header design requests please contact: celeritech.nl/ - they are the best at that!
Find out more about the insanely good sounding Mustang V8: • A 1965 GT350R Mustang ...
The clip of the Toyota Century was taken from effspot - check more of this car here: • Toyota Century vs Merc...
In case you notice that I missed to credit the source of a clip in the video, let me know. I'll add it here.
-------------------------
Music by:
Puppy Love (Sting) by Twin Musicom is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/... www.twinmusicom.org/----Doh De Oh by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/... incompetech.com/music/royalty-... incompetech.com/
---
Scoring Action by Your Mom is licensed under a Creative Commons Attribution4.0 license. creativeohcomeon.org/nolicens... incomegone.com/music/royalty-f... nobodyreadsthis.con/
---
Black Vortex - Scoring Action by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/... incompetech.com/music/royalty-... incompetech.com/
---
Banjo Short by Audionautix is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/... audionautix.com/
---
Wow, you read this far? You shouldn't have! You wasted your time...

КОМЕНТАРІ: 2 700

@maisteer 2 місяці тому

Watch the Greatest(!) Exhaust Video in the history of mankind here: How to fix the WORST Sounding V12 Exhaust ukposts.info/have/v-deo/bnWblpyDioie2nU.html

@Zubayer_Islam_Rezoan Рік тому

Months of research in a single video. You did a top notch job. I'm sure a lot of guys will go ahead from here to build their own sound machines.

@maisteer Рік тому

That would be great. We need more of them!

@DerSnipOr Рік тому

@@maisteer Darf ich fragen, was Du beruflich treibst? Auch als Fahrzeugtechnik Ing. selten so tiefe Recherche zu dem Thema gesehen. Daumen hoch! Top Video, technisch interessant und kurzweiliges editing. Viel Erfolg beim Bau!

@maisteer Рік тому

@@DerSnipOr Thank you so much. I'm not an engineer, I just like tinkering ^_^'

@AmplifierHero Рік тому

Exactly tought the same! I learned so much because of this video. Now i want 6 into 1 headers on my e46 😁

@pixelnazgul 7 місяців тому

Bull ox

@davestewart1656 Рік тому

The sound is worth the work.

@maisteer Рік тому

Yes, I totally agree. And I hope I can make another video about it soon.

@mememanfresh Рік тому

absolutetly

@BigUriel 11 місяців тому

I doubt you'd really say that if you were paying for it! Especially when you consider that your car will probably be slower after spending all that money. Manufacturers these days to go great lengths to design exhaust systems with multiple parallel turbos and twin scroll turbos because splitting the headers prevents pressure waves from stacking and increasing exhaust backpressure which costs you efficiency and power. Besides F1 cars sound good...for F1 racing. On a road car I don't think that high pitched raspy sound is even all that great. Most definitely prefer the more complex sound of a traditional Ferrari V12, or even the brute thunder from a M279.

@davestewart1656 11 місяців тому

@@BigUriel I wont argue. If my anemic checkbook had to shell out for it, I'd probably put equal length headers on a one cylinder motorcycle and call it a day.

@maisteer 11 місяців тому

@@BigUriel There's one man that went through great trouble and expense to do just the opposite of what became the norm today. And in my opinion he succeeded, what do you think: ukposts.info/have/v-deo/iI9qiG6OjGqWzJs.html

@lynxranger9226 Рік тому

This was a phenomenal video. I’ve always been intrigued by why the zonda sounds so different to everything else. It is also my favorite sounding car. I knew it has equal length headers, but I watched videos of other cars with equal length headers and learned that just equal length headers and firing order was not the only thing that made a difference. Now I know why, thank you so much! Made my day!

@maisteer Рік тому

Thanks. I didn't know too when I had the Nissan.... and it made me very sad to have a very shitty sounding V12 after all that work.

@Funktastico 6 місяців тому

Is it cross firing or sequential firing , that makes it sounds better ?

@maisteer 5 місяців тому

Let's see if you like the follow up video too..... ukposts.info/have/v-deo/bnWblpyDioie2nU.html

@maisteer 5 місяців тому

@@Funktastico It's little bit touched on in the new video. Maybe it'll can shed some light on it: ukposts.info/have/v-deo/bnWblpyDioie2nU.html

@lynxranger9226 5 місяців тому

@@maisteer Thanks for the ping! Excited to watch it. Your new video hasn't popped up on my home page for some reason, so I am glad you let me know!!!

@franciscoferraz6788 Рік тому

12:56 NOOO THE CAD PAIN, I FEEL FOR YOU MY BROTHER 😭😭 On another note, this is the most unexpected best video I've ever watched. I had no idea exhaust headers had such a MASSIVE effect on sound. Thank you for posting, can't wait to hear the final product!

@maisteer Рік тому

Thanks. Hopefully I can bring the noise.... soon. ^_^'

@franciscoferraz6788 Рік тому

@@maisteer Bring it! I've subbed so I can hopefully catch it when it comes out. I learned a lot from this video, feel free to make more educational content along this vein.

@maisteer Рік тому

@@franciscoferraz6788 I'm working on the next one already... it involves a lot of flames this time.

@cbaxtermusic Рік тому

totally felt the same way, totally learned something new

@chrisburckhard9122 Рік тому

You definitely need more subs! Not only was this video very educational, it was extremely entertaining! Good work!! 🤘

@maisteer Рік тому

Thanks you. In only need about 500 subs though. Then I need mainly more views so I can ask youtube for money ^_^'

@FirstLast-tx3yj Рік тому

@@maisteer dude i thought ur a pro youtuber until i entered the channel to see you only have 2 vids Please finish the 12 to 1 Every other channel puts the project on pause The V12 miata guy and driftworks Be the first plz I subbed!!

@maisteer Рік тому

@@FirstLast-tx3yj Tim will finish it. It should be ready in August. Then there will be definitely a follow up video... and there's also this other project I want to show you. ^_^'

@drifter905 11 місяців тому

keep up the good quality editing. great video Eh

@hosoiarchives4858 7 місяців тому

What about Mazda 787b rotary

@GeorgeXian Рік тому

I've spent years researching just what you need to make that high pitched shriek that the Zonda makes (although the Murcielago also makes this then later special headers make the Aventador do that as well but I still preferred the Murcielago sound). You've just summed it all up into one video.

@maisteer Рік тому

I'm glad you found some value in it ^_^

@Tyler97GSX Рік тому

This is a great video. I have spent many hours researching and pondering this question. It obviously isn’t as easy as it seems to recreate the “$10k japanese exhaust”. So many have tried to duplicate it without the results. I’m excited to see what you are working on!

@maisteer Рік тому

Thanks. Glad you liked the video ^_^

@Maik_Hawk Рік тому

Can't wait to see where this project ends up - I want to hear that V12 singing! Also 2 videos both with incredible levels of production quality. Definitely happy I clicked subscribe after your first!

@maisteer Рік тому

I can't wait to hear that thing too. I've had this idea in my mind for so long, and now we've been working on this together for a already couple of years now - I'm really excited to see it finally finished. Thanks for the kind comment. I guess learning how to edit the last 6 months really pays off ^-^'

@procrastinator1842 11 місяців тому

It ends up being wasted in a stupid drift car. Such a waste.

@maisteer 11 місяців тому

The car will be first used August 17/18th in the Iron Drift King competition. If you happen to be in Germany and want to hear the V12 live for the very first time, tickets are still available at the moment at www.irondriftking.de

@RI5xFINEST 11 місяців тому

After watching this video, I went and bought myself an m120 v12 to build a car around it😂

@maisteer 11 місяців тому

@@RI5xFINEST Haha, my mission is now accomplished. ^_^

@snypergaming1744 11 місяців тому

Prices of m120's right now ↗

@maisteer 11 місяців тому

@@snypergaming1744 ^_^

@RI5xFINEST 11 місяців тому

I need to hear how your 12 into 1 header sounds lol I keep checking back for updates

@davekennedy6315 11 місяців тому

90s era F1 V12 engines was my all time favourite! I look forward to seeing your finished product, you have certainly done your research and clearly have the talents for designing it too. The best of luck mate!

@maisteer 11 місяців тому

Thanks Dave. The car is supposed to be finished in mid August, then we see how much design talent I had. ^_^' Thanks for watching.

@Shromp-sh7lh Рік тому

This was a top-tier video. Learned a lot, had a few laughs, and now I'm hooked to see the finished header. Instant subscriber!

@maisteer Рік тому

Thanks a lot. Can't wait to show the finished header to my new subscriber. ^_^

@maisteer 5 місяців тому

The headers are finished and the new video too. You can watch it here: ukposts.info/have/v-deo/bnWblpyDioie2nU.html

@maisteer 6 місяців тому

Update on the follow up video. Turns out really good videos take up a good amount of time to make. And the Greatest exhaust video of all time, takes up an even greater amount of time. I'm trying to finish it as fast as possible without sacrificing the greatness. It's around 75% done now. Imagine it like the bible. Everything is finished, only that part with Jesus is still missing. ^_^ There's a preview on twitter / x already, for those who can't wait. But until it's finished, I won't take much time to respond to comments - I even switched off my phone for the last 2 weeks to focus just on this, so the video will be finished soon enough....

@Brownie861 6 місяців тому

I was realy looking out for this follow up video. Thanks for making the headsup. Now i know It is on Its way. Your content is very informative yet so funny 🤣 very nice to watch. Good luck! GrüSe aus den Niederlanden.

@SoylentGamer 6 місяців тому

We await your mechanical Angel with bated breath

@smithysmalls4616 6 місяців тому

Content isch super! Warte auf das follow up!

@Big_D39 6 місяців тому

Awesome dude. Your quality is gonna be out of the park.

@jaimelazo 6 місяців тому

Just subscribed... Waiting for it haha

@TheFatherCharles Рік тому

I am not sure how you managed to fit that much info into a video while keeping it understandable and enjoyable. You definitely earned my subscribe. Keep producing this kind of content and you’ll be big in no time! (Even though you dissed my fav car the LFA)

@maisteer Рік тому

Haha, thanks. No more LFA dissing then... maybe ^_^'

@MediumPoo Рік тому

This is something I always thought about and wish I had the knowledge and ability to make replacement headers for cars, to make the exhaust sounds transformed and incredible. Making a modern shopping car sound like a group A Subaru legacy etc. I honestly think the unique sounds of cars can transform competent cars into legends. I think the sound triggers your emotions, like watching a movie without a score has little emotional connection. Hats off to you!

@maisteer Рік тому

Thank you. I agree, the sound has to be there to make it feel really good...are we still talking about cars? ^_^'

@PrestonMadrigal 4 місяці тому

This video is awesome. The Sound of exhaust notes are one of the main reasons I’m into cars in the first place. Thankyou ❤

@mxwd. Рік тому

I've been searching for a video that explained this subject for a long time, and you did a really good job. I've always loved V12s and was wondering what is all behind its beautiful sound and the difference between each V12 engine sound and this video perfectly fits into the type of content I wanna watch.

@maisteer Рік тому

Thanks. I'm glad you liked the video AND learned something at the same time.

@vitoialongo4460 Рік тому

I don't know what to say, you really did that homework. I couldn't realize that the bmw rasp was from the colector construction method, genius. It is not only the equal lenghts but a smooth merge collector... awesome

@maisteer Рік тому

I didn't know either until I tried to make a M120 to sound good - and that was one expensive lesson I tell you! ^_^'

@andrewmyers3331 11 місяців тому

8 thousand subs for this kind of content. cannot wait for you to blow up because projects like this drive the community of strange and wild builds keep working man

@maisteer 11 місяців тому

Let's see what's coming in the future ^_^ Thanks for watching Andrew.

@maisteer 5 місяців тому

Well... it's 12 thousand now. And I made a new strange and wild video just for you ^_^ ukposts.info/have/v-deo/bnWblpyDioie2nU.html

@NiallMA70 Рік тому

Fantastic research and very entertaining! That particular exhaust note is something that I’ve always been fascinated with. It totally transformed the V8 sound! Looking forward to your next video!

@maisteer Рік тому

Thanks for watching. I hope you might have a car with that exhaust note too one day ^_^

@maisteer 5 місяців тому

Look no further. The next video is here: ukposts.info/have/v-deo/bnWblpyDioie2nU.html

@Celeritech_exhausts Рік тому

My compliments on the video and the information. You did your homework! Very well done! Proud to be in your video! Okay, I miss a few things (maybe for a follow up video ;) and there are some assumptions but only one you do not backup with some evidence: the fire order in the collector. You would assume, but as you mention, the Brilliant already sound perfect. We have a likewise project, so maybe we know more in a few months. Btw, if you want, give us an email, we would be glad to be of assistance for your headers.

@maisteer Рік тому

Thanks for all the compliments, knowing that it comes from one of the best in the business really means a lot to me. The evidence for the firing order is quite hard to find yet. Best I can come up so far is a comparison of the Mustang in the video with the plenty of 8-in-1 symmetrical setups - but it's an apple to oranges comparison, since there all based on different engines. But likewise, there's another project on the back burner, where this could be checked easily. But now I'm really curious on your new project as well... - e-mail sent... ^_^

@R.B_B Рік тому

Nice. Can you explain more about the fire order collector?

@Confusius. 11 місяців тому

UKposts thought I might be interested in this video. Never had it been so on point. I'm a strange man. I can suffer through breakups and terrible misfortune without shedding a tear but a screaming engine still makes me cry of joy.

@maisteer 11 місяців тому

Thank you for sharing your tears. Your're not strange... just a man with an exceptional good sense for what is important in life. And it would be my honor to make you cry some more in the future.

@simslim2000 8 місяців тому

Great video, had no idea what I was in for but enjoyed it all. Thank you for the sharing of engineering, the struggles and the contribution to accessable knowledge.

@maisteer 8 місяців тому

You're welcome. Wait for part 2. It's gonna be a lot more struggle.

@maisteer 5 місяців тому

I hope you like part 2. It's finished and here: ukposts.info/have/v-deo/bnWblpyDioie2nU.html

@jonkeau5155 11 місяців тому

I believe the Rob Dahm 4 rotor is a major competitor for a 12 to 1, technically since each rotor has three sides it would have a very similar exhaust pulse rate and sound, that engine sounds absolutely amazing!

@maisteer 11 місяців тому

Yes, absolutely. 4-Rotors do sound insanely good: ukposts.info/have/v-deo/bX6LoYuieGujqIU.html

@felix-bk7ne Рік тому

Incredibly insightful and funny video. I wasn't aware of these factors creating my favourite engine sounds. And that V8 Mustang blew my mind, sounded so perfect yet so wrong at the same time haha.

@maisteer Рік тому

Yeah. Hearing it for the first time it feels so wrong, but yet still so good.

@maisteer 5 місяців тому

Thank you. I've made a new video... the mustand unfortunately had to be in there again too ^_^ ukposts.info/have/v-deo/bnWblpyDioie2nU.html

@abin1823 22 дні тому

I don't know how I missed this. Absolutely incredible. Thank you!!

@AndrewRzymski 5 місяців тому

thanks for taking the time to teach this!

@mbaladon 6 місяців тому

Awesome work! The Matra V12 is still the most amazing F1 sound ever in my opinion. It has the screaming banshee note at the top but still that distinct raspiness that doesn't become white noise distortion.

@maisteer 5 місяців тому

Thanks.. I made a new video, altough no Matra in there... again.. but at least some Mazda: ukposts.info/have/v-deo/bnWblpyDioie2nU.html

@Bikaz 7 місяців тому

This video is such a shitpost, yet so informative and well researched. Absolutely love it. You earned that sub.

@maisteer 7 місяців тому

Hope it's not getting downhill from here on, but thanks ^_^

@AdamShelton61 6 місяців тому

You’ve knocked it out the park for your second video, can’t wait to see more 👌

@maisteer 5 місяців тому

Here's the fourth video...ukposts.info/have/v-deo/bnWblpyDioie2nU.html - going by the pattern - this should be good again ^_^

@SupraSav 24 дні тому

The sound is absolutely phenomenal. As a welder fabricator, car modifier and "add lightness" snob, these exhaust videos you make always pique my interest

@tanvirhussain6106 Рік тому

First time on this channel. Got to say it's funny and good content. I'm a lover of headers that create insane sound naturally

@maisteer Рік тому

I really hope everybody in the world is a fan of headers that create insane sound....

@sorry-but-im-italiano5958 6 місяців тому

A future video where you delve into the technical aspects of a sports exhaust would be very interesting! 😀 talking about headers, firing sequence, pressure waves and back pressure, etc...

@maisteer 5 місяців тому

Hihihi..... after I've read your comment I made exactly that video just for you ^_^ ukposts.info/have/v-deo/bnWblpyDioie2nU.html

@kspec6131 22 дні тому

I'm glad I found your channel. I thought I was the only one in the world this Passionate about the sound f1 cars make.

@kyzor-sosay6087 11 місяців тому

Excellent video,man. Looking forward to seeing the next one.

@maisteer 11 місяців тому

Thanks. Me too. Can't wait for the next one ^_^

@williamrgrant 6 місяців тому

I have an acoustics background and I had never considered the impact of header design on engine sound. This makes a lot of sense though. Pulses per second is basically Hz or frequency. If you have more pulses coming out of a single pipe (or speaker) per second, you have a higher frequency. Of all the exhaust tones in this video, I loved the GT 350 the most - 10:13. mmmm that low rumble :P The most *interesting* tone was the Honda at 9:32. It is clearly 2 distinct 'notes' (to make a chord!) which makes sense with the 2 header pipes with slightly different path length. My takeaway: people have different opinions of 'best' tone. But this is a fantastic look at how those tonal characters are created!

@maisteer 5 місяців тому

I hope you will like the new video... it's like an entertaining physics class but without physics: ukposts.info/have/v-deo/bnWblpyDioie2nU.html

@kdub11 26 днів тому

Header design is one of the main components of exhaust notes. Lol

@kevinsabharwal1822 6 місяців тому

This is the one time I would agree when an exhaust upgrade with no horsepower increase is worth every penny 😊

@maisteer 5 місяців тому

More sound improvements and horsepower increases in the new video.... ukposts.info/have/v-deo/bnWblpyDioie2nU.html

@triumphdollysprint 7 місяців тому

Never seen one of your vids before, but the collection of v12 sounds and your editing is enough to convince me to sub haha 🎉

@maisteer 7 місяців тому

I hope you come back for more when the new one get's released in 2 weeks ^_^

@maisteer 5 місяців тому

I hope you like the new one too: ukposts.info/have/v-deo/bnWblpyDioie2nU.html

@davidrifkin1323 Рік тому

Prob the best YT video I’ve seen in a while… subbed! Excited to hear what this iteration sounds like!

@maisteer Рік тому

Thanks. Maybe I can make a better one soon...

@curvs4me Рік тому

Excellent journey down the rabbit hole. I've been researching the 8-1 and 12-1 for years. There's another way to run the piping. It's all about the pulses coming out sequentially. A 12-1 v12 at 7000rpm sounds identical to a 12-2 at 14000rpm. You can go 12 into 2 into 1. Or really any combination with sequential pulses going into the collectors 2x 3 into 2 into 1 on each side. then 4 into 2 into 1 with everything for packaging. As long as the various segments remain equal length. In theory there should be no losses if the collector lengths are tuned for the desired torque peak.

@maisteer Рік тому

12-2 at 14000rpm....? I'm really looking forward to hear that! How come you know so much about it?

@curvs4me Рік тому

@@maisteer That's the Ferrari F1 sound. It's just the number of equally spaced sequential pulses and the collector. Once it gets into one pipe, as long as it's feeding odd even odd even with equal length pipe it will have the sound. a 6 cylinder into one at 20k rpm sounds identical to a 12 cylinder into one at 10k rpm. I learned it mostly from exhaust development and tuning. Length, size, collector length etc. Those grumbly v12s are tuned for lower rpm peak torque. Sounds like crap at high rpm.

@curvs4me Рік тому

Take the 6 pipes on one side into 2 by putting all the even pulses into one and all the odd into the other. Now these two can merge together into 1 further down the line. scavenging is the key. Even fires and creates a vacuum in the pipe to pull out the odd pulse and continues repeating. Repeat the exact same thing on the other side. You can tie the remaining two together wherever it's convenient. It will already be odd even odd even because the left and right side are odd and even firing. Does that make sense?

@curvs4me Рік тому

You can also go back from 1 to 2 after the merge and get the same sound out of both. with further development you could change the length of one side changing pulse timing and doubling the pulse frequency peaking at RPM x.

@maisteer Рік тому

@@curvs4me Yes, absolutely. Thanks for the detailed answer too.

@gnrtx-36969 Рік тому

Sasaki is insane i watched allot of videos about s600 having a race exhaust not only it's very good sound but it's also funny how slow it is and being soo loud

@maisteer Рік тому

Yeah, that screaming slow V12... It let's you enjoy the sound for longer when it's driving by. That's a good thing! ^_^

@davidskala7652 7 місяців тому

This sounds like an amazing journey and I'm here for that ride, definitely earned a new sub here brother!

@maisteer 7 місяців тому

Thank you. The ride continues in 2 weeks. Thanks for checking by. ^_^

@maisteer 5 місяців тому

Thanks... It took a lot longer than 2 weeks to finish the new video.... but here it is just for you David: ukposts.info/have/v-deo/bnWblpyDioie2nU.html

@davidskala7652 5 місяців тому

@@maisteer thank you I appreciate that you came back to let me know about it, you definitely deserve way more subs brother you put alot of work into these videos. I just finished watching it and sending it to some other gear heads, and I can't wait for the next part of the journey! Much love and respect from New York

@alexpatton7356 8 місяців тому

Love this and the work you put into it

@maisteer 8 місяців тому

Love your comment and the work you put into it ^_^ - thanks!

@vongdong10 Місяць тому

The title of this video did not age well lol

@skellig5867 День тому

@vongdong10 Neither have you.

@Dtp2296 Рік тому

The huayra R is the best sounding bar none. It makes me shiver and emotional it's so good.

@Dtp2296 Рік тому

I did see all the v12 f1 cars at goodwood last year though and they are unbelievable up close and personal at full throttle

@maisteer Рік тому

@@Dtp2296 I've just checked the video. I didn't even know they made an NA Huayra. I'm glad they made tough. Was Gordon Murrays T50 at Goodwood too? I wonder how they compare in real life.

@kylejohn486 11 місяців тому

Wow. So much information. Hungry for more, amazing, thanks for the hard work. And the guy in the comments, true genuis answers by you both. Suoer passionate explanations. Excited to see more in the near future.

@maisteer 11 місяців тому

I think you mean the same person ^_^' Thanks for watching... more is in the works.

@patricwell8335 11 місяців тому

The best channel wow been looking for in depth sounds...hell yeah

@maisteer 11 місяців тому

Thanks Patric. Hope you check back when the 12 into 1 is finished and fired up the first time. Should be ready for it's first race in mid-august.

@jimsmith9912 11 місяців тому

Wow!!! Thank you so much for all that valuable info on the exhaust and header design. I didn't realise it has so much to do with the resulting sound. Awesome. Thanks again.

@maisteer 11 місяців тому

Thank you for watching. I'm glad you liked it. ^_^

@lozl Рік тому

This video is a master piece of editing. And a fantastically informative. Very interesting with an excellent well thought out video. I have been interested in this for a long time and never quite been able to pin down what what is is that makes such a difference. I thoroughly enjoyed this. Thanks you so much.

@maisteer Рік тому

Thanks for the feedback. I guess learning editing for the last 6 months really pays off. ^_^'

@LuisCruz-fy9uv Рік тому

This is awesome looking foward to the finish project. One question if you have a v6 is best to merge the 6 together at the same time or you can merge 3 and 3, and the using equal length piping merge them together?

@maisteer Рік тому

First of all is the V6 firing at an even intervall of 120°? Then it seems that 6-in-1's sound better than 6-in-2-in-1, but I would assume, that's also dependent on how long the secondary pipe is. Or to put it like this, how much time the exhaust pulses have time to interact with each other, before they ALL merge together. At the moment it's just an assumption, I will try to find out for you all sometime.

@trackdayclassics 11 місяців тому

Thank you for using my 8 into 1 video in this series. Really like this video, funny and very educational! Cheers!

@maisteer 11 місяців тому

Thank you for creating the 8 into 1 header. It's really inspirational and I hope to hear more of it in the future too. Cheers!

@chasemorse149 11 місяців тому

Honestly best content on here right now glad i found this hope they keep coming

@maisteer 11 місяців тому

I hope that too ^_^ Thank you

@carvin_yt Рік тому

we need part 2, it's awesome!

@maisteer Рік тому

Coming..... not soon. The car will have it's first competition in august. So sometime after that...

@josephd.2638 7 місяців тому

August came and went. Where's the video? 😂 Christmas has nothing on your videos 😂

@ChrisHib01 Рік тому

Really cool video, I've been trying to find a more laymans/understandable/interesting video on this subject! Absolutely nailed it with the clips and commentary! Subscribed :) A year or so back I had an r32 skyline that I sold for good money-I was seriously a considering a s600 and spending the rest on one of these manifolds lol

@maisteer Рік тому

Haha, that would have been a good choice... or maybe not ^^'

@ellisjackson3355 11 місяців тому

Big inspiration. I've been wanting to design and fab up my own headers to create a sound that i like for a while and i see you've also watched a few of the videos that I've watched over and over again for years. Some day...

@maisteer 11 місяців тому

Yeah, I hope you can make it one day, it's gonna be worth all the trouble ^_^

@olegb5061 11 місяців тому

Very high quality and tons of information put together concisely, well done

@maisteer 11 місяців тому

Thank you Oleg. I'm glad you liked it.

@armoris66 Рік тому

This is without a doubt one of the best videos of any type I've every watched on YT. The combination of technical detail and humour sat perfectly with my ability to be bothered to listen. Bravo! Subbed 👍🏾.

@maisteer Рік тому

Hmm, then I should make more of that.... ^_^

@GF-mf7ml Рік тому

Yes, sound are work of art.

@maisteer Рік тому

Absolutely, and I hope that good sounding engines won't die out until the very last drop of fuel on this planet has been converted into music, heat and power.

@SolMarTraders 7 місяців тому

Awesome job man!! Incredible!! I want to see whats next!! you're doing an amazing work!! thanks for sharing it.

@maisteer 7 місяців тому

Thanks. Next video in 2 weeks. There is a small preview of it on my twitter thing.

@maisteer 5 місяців тому

This is what i did next. Hope you like it: ukposts.info/have/v-deo/bnWblpyDioie2nU.html

@_..-.._..-.._ 9 місяців тому

Exhaust design is my favorite part of being a pistonhead, you could devote your life to it and still learn new things.

@maisteer 9 місяців тому

That's for sure. But only if the engine has the potential to make it interesting.

@TCreatorO 11 місяців тому

Part 2! part 2! we want to see the results! You have inspired me to try to make a 4cylinder sound like a v12, or at least higher pitch lol, ill use it as a challenge to improve my fabricating and welding skills, might start this experiment in 1 year or so, the project im planning to do this to needs way more work, to be where I want it to be, we shall see

@maisteer 11 місяців тому

Good luck with the project, I hope it'll all works out. The car with the 12 into 1 is supposed to be finished in mid-August. And I can't wait to hear it too ^_^

@sarbakara7469 7 місяців тому

@@maisteeris september

@sarbakara7469 7 місяців тому

@@maisteerAs a 4-8-1 header, I think the fact that it rotates will improve the sound even if 2 tubes are triggered at the same time

@suzysuzuki8865 16 днів тому

An open tri y header on my four cylinder gave it quit a high pitch lol

@chillznax 11 місяців тому

Incredible video. I’ve been wondering how this sound was engineered for a long time.

@maisteer 11 місяців тому

Well this is one part of it ^_^

@maisteer 5 місяців тому

There's a new video with A LOT more on this: ukposts.info/have/v-deo/bnWblpyDioie2nU.html

@josephd.2638 9 місяців тому

One of the best car videos ever made. Amazing editing!

@maisteer 9 місяців тому

This is one of the best comments under one of the best car videos ever made. Thanks ^_^

@BornToDrive1500E 8 місяців тому

Amazing video man, full of good information. Thank you very much

@maisteer 8 місяців тому

Still, a lot of topics left untouched as I know now...

@ToroMoto Рік тому

I would love to hear how you think people can get their inline 4-cylinder super sport motorcycles to sound more like F1 cars than they already do!

@maisteer Рік тому

Put a cbx 1000 motor in it. Job done!

@NickKautz Рік тому

Or Kawasaki ZN1300 engine , much cheaper and more available :)

@maisteer Рік тому

@@NickKautz Good choice. I didn't even know that this existed... Thanks for sharing!

@InvaderSS670 11 місяців тому

More RPMS!!!

@maisteer 11 місяців тому

@@InvaderSS670 ^_^ ukposts.info/have/v-deo/aWd_rJWPi6l-pJs.html

@SupraTompan Рік тому

Equal lenght headers is the meaning of life. I've been studying 4-1, 6-1, etc. For years. It all started when I bought equal lenght downpipe for my Skyline, then I noticed that some four cylinder motorcycles sounded a lot better than others, and those have 4-1 instead of 4-2 which just sounds... Bad. F12 Berlinetta has equal lenght headers from factory. Another design study I've had, are headers for the Honda CBX 1000 motorcycle. It has a inline six engine, and there are a few 6-1 equal lenght headers that make it sound mental, while the 6-2 or 3-1 just sounds shit. Interesting topic for sure.

@maisteer Рік тому

Yeah, I wasn't sure how to include the CBX in the video. To me that's the best sounding production inline six ever. 2nd place goes to the RB26. But maybe I have missed another exotic one..

@Itwasntalieitwastrueinmymind 7 місяців тому

Amazing vids! Hope you upload more

@maisteer 7 місяців тому

See my other comment. ^_^

@NotAProCHESSplayeR 8 місяців тому

This guy is going places Keep up the hard work ❤❤

@maisteer 8 місяців тому

Haha, after six months working on something completely different, it's time get back working on youtube videos.

@maisteer Рік тому

I know this one will get a million views eventually - it has 2 Views already. But I'm not so sure about the very different german version: ukposts.info/have/v-deo/a32qe6Gem56rzZc.html

@maisteer Рік тому

The video is now 14 hours online and got 8 views. I just shared it on reddit. Now I hope I can make it to 10 before lunchtime ^-^

@AngeTheGreat Рік тому

When it does, just remember I was here

@maisteer Рік тому

@@AngeTheGreat I will! Thank you so much for your work. You can not imagine how much hours of my life I have used up cutting and welding pipes, just to hear the difference in sound they make. I hope the engine simulator can reduce that time by about 98% ^-^'

@mememanfresh Рік тому

@@AngeTheGreat what the hell youre here too

@AccAkut1987 Рік тому

You're trying to make good content here, but I hardly made it through the first few minutes as you just try too hard to make the video and yourself appear "cool". Your English doesn't help I'm afraid, your mother tongue with subtitles may have been a better choice.

@TheMogd0r Рік тому

This is the smartest, wisest, funniest, and best produced video I've ever seen from people with so few subs. Amazing work. I hope to see more

@maisteer Рік тому

This is so nice of you, thanks. Just for your comment alone I will have to make more ^_^

@speaker9694 7 місяців тому

So much sound information in one video this is amazing!!!

@maisteer 7 місяців тому

...yet so much missing. More coming in 2 weeks... and I bet there will be a lot missing again ^_^'

@speaker9694 6 місяців тому

No Way I cant wait!@@maisteer

@maisteer 5 місяців тому

Much more information in the new video... but unfortunately it's a lot longer too: ukposts.info/have/v-deo/bnWblpyDioie2nU.html

@chappardababbar 11 днів тому

Outstanding video! always wanted to understand this. subscribed!

@tomaskling6032 7 місяців тому

Hi, did not catch if the collector should be with full pipe diameter endings in to the collector or smooth transitions. Also what collector angle is the best for that ecstatic sound? I will make new 3-1 headers for my 6cyl and would like to get the best possible sound. Thank you in advance!

@maisteer 7 місяців тому

More on that in the follow up video. But for now you can checkout: archive.org/details/fourstrokeperfor0000bell - Chapter 9.

@cr4zyw3ld3r 7 місяців тому

Finally a video actually talking about what makes that sound, not just a bunch of jargon about firing order, intake types and cylidner bank angle

@maisteer 7 місяців тому

...still they would be much better with real life demos. ^_^

@cr4zyw3ld3r 7 місяців тому

@@maisteer all in due time!

@scareyaf 11 місяців тому

Awesome video man! Simple, entertaining and easy to watch. Thanks!

@maisteer 11 місяців тому

Thanks. I'm glad you enjoyed it.

@MaxK2006 7 місяців тому

sick project man keep going

@maisteer 7 місяців тому

Thanks... editing the follow up right now. Only a couple of weeks left ^_^'

@guidogazzo1117 7 місяців тому

A MOST EXCELLENT VIDEO!!! THIS IS THE INFORMATION MANY SPORTS CAR ENTHUSIASTS REALLY WANT TO KNOW ABOUT!!! WHAT MAKES MY ENGINE SOUND LIKE A F1 RACE CAR!!! GREAT WORK!!!

@maisteer 7 місяців тому

....thanks. Hope the follow up video will be even better.

@apancher 8 місяців тому

I visited Pagani the day your example video was shot! It was May of 2005, and Mr. Pagani had just picked up his Zonda F. It was absolutely surreal.

@maisteer 8 місяців тому

Something you'll never forget.... I'm kind of jealous now ^_^

@gregoryballestero4369 7 місяців тому

I've always been curious how it would sound if you made an individual pipe for each exhaust port a double stack of 6 2inch pipes at each corner of the bumper or maybe even send them straight up

@maisteer 7 місяців тому

Propably very loud ^_^

@TheBakuganelite Рік тому

Dude I can already tell I love your channel. I can't wait for the sound reveal 🎉

@maisteer Рік тому

Thanks. Can't wait too. Hope Tim will finish the car asap ^_^

@ivogama1161 Рік тому

Found this channel by chance, you got my attention for life! Good job, excelent research.

@maisteer Рік тому

Wow, that's hopefully a very long time ahead. Thanks, I hope I don't disappoint it later.

@RisetoSlide 11 місяців тому

This video was so well done! Subscribed!

@maisteer 11 місяців тому

Thank you. I hope I won't let you down in the future ^_^

@olist407 7 місяців тому

That's great! I think I've never was so shocked about an abrupt end! 😂 Love this style, great video. But pleeeeeease do go on. With both, the project AND the video about it

@maisteer 7 місяців тому

Thanks. Will do. New video in 2 weeks.... but there is a small Preview on my twitter already ^_^

@maisteer 5 місяців тому

Here just for you a new video about the project... and exhaust science without the science: ukposts.info/have/v-deo/bnWblpyDioie2nU.html

@tryin2figureitout 8 місяців тому

I have watched the video 2 times and not sure if I keep missing it but does it ever show the exhaust completed? Does it have the finished sound?

@maisteer 8 місяців тому

...it was a build in progress. Working on the next video soon.

@shane6259 11 місяців тому

easily mistaked you for a 100k+ youtuber that ive just never heard of til now. good edits, and humor, keep up the good work

@maisteer 11 місяців тому

Thank you. Maybe one day at 100k. Let's see. It's already growing faster with 3 videos than I expected ^_^'

@JDT738126 5 місяців тому

Amazing that it makes the difference in sound. Very interesting

@crystalzues4712 10 місяців тому

Would love to see you dive into the theory of exhuast materials and how that affects sound. Keep it up!

@maisteer 10 місяців тому

Haha, me too. But better to have footage to show - which I haven't... yet. But my take - material thickness in exhausts is much more relevant than the material itself for sound.

@maisteer 5 місяців тому

You mean like I did in the new video? I did that just for you: ukposts.info/have/v-deo/bnWblpyDioie2nU.html

@jonasduell9953 11 місяців тому

Really a Maisteeeer! Jokes aside, lightly presented but a great and well researched eargasm piece. Being a welder my head is already going places :) I might have a nifty 80's 8 cylinder hobby in my garage anyways.... Thanks a lot, great content und viel Erfolg beim Iron Drift King

@maisteer 11 місяців тому

Thanks jonas. Hope you get a great project going in your garage that we will hear from in the future. ^_^

@oliverczeilinger8842 Рік тому

Absolutely amazing channel, glad I found you!

@maisteer Рік тому

I'm glad you found me. Welcome. ^_^

@JonesingUSAF Рік тому

This entire episode was like a nonstop ear-gasm!! Subbed after watch this. So much research and I love it!

@maisteer Рік тому

I'm glad your ears did like it ^_^'

@dsailorman1 5 місяців тому

Thank You immensely for that lesson! Vielen dank!

@-Evilempire- Рік тому

best video video ever, perfect , a meticulous search for information. you deserve to have many more subscribers , I hope they come . I'm signing up now and then.

@maisteer Рік тому

Thanks. Time will tell....

@HarbringerSalami 5 місяців тому

earned a sub with this kind of content quality

@maisteer 5 місяців тому

Earned a big Thank you with that comment.... and let your friends know too ^_^

@helixwash4508 Рік тому

I can't believe this is my first time seeing your videos. Dude 😂 this is amazing, fantastic work

@maisteer Рік тому

Don't worry. Channel is hardly 2 months old. You're right here at the beginning ^_^

@helixwash4508 Рік тому

@@maisteer well that's a first for me, glad to be here!

@maisteer Рік тому

@@helixwash4508 Glad to have you ^_^

@OlavAlexanderMjelde 11 місяців тому

Looking forward to your follow up video, great content.

@maisteer 11 місяців тому

Me too. Car is supposed to be finished in August, so sometime after that.

@hugoalfa75 11 місяців тому

Top-tier video! had a good laugh and excellent tech content too!

@maisteer 11 місяців тому

Thanks. I'm glad you enjoyed it. ^_^

@platinumgrit 7 місяців тому

Liked, subscribed! Love all your videos! Keep them coming :-)

@maisteer 5 місяців тому

But this new one is terrible.... you can watch it here: ukposts.info/have/v-deo/bnWblpyDioie2nU.html

@suddendilemma5137 7 місяців тому

What a fantastic channel. Subbed!!

@maisteer 7 місяців тому

What a fantastic comment. Thank you!

@WhatUSeekisSeekingYou 7 місяців тому

When buying a four or six cylinder car to apply what you've discussed in this video, would one need to keep in mind space in engine bay? As equal length 4-into-1 or 6-into-1 pipework would require a lot of space? How does one choose a car so an exhaust shop has the best chance to actually be able to design and fit the type of exhaust you spoke about in your video?

@maisteer 7 місяців тому

Best reach out to celeritech.nl - they can take care of your needs. There is actually a lot more going into it.