Watch the video on how to turn a ball into a ball from one piece of wood! Download PDF guides HERE! www.hitechedu.fi/woodturning/
КОМЕНТАРІ: 453
@HayyywardРік тому
When I was a kid, an old neighbor of mine would do this with just a pocket knife and a piece of wood. He would carve balls inside pieces, a ball going down a spiral, several balls inside certain designs, etc. He would also carve animals out of something like a peach pit. From what I remember, he told me that the house he grew up in was built by hand by his father. Every single wood shingle on the roof and sides were cut individually and then nailed in place. His father taught him and when he got older, he put all new wood shingles himself on his new home. In fact, he built a miniature model of the home he grew up in and made it all by hand as well. Every little wood shingle done the same way. It was really impressive.
@birdshenanigans8506Рік тому
Bolloxs
@kimhenry5658Рік тому
I was a full time woodturner when I was young and it’s good to see such competent use of chisels when I am used to seeing incompetent use of scrapers so often on you tube masquerading as clever woodturning. Cheers and well done.
@rroe5718Рік тому
Definitely Correct.........Many turners especially newer one have no idea what a gouge, skew or many other tools are. Everything they do is done with Carbide scrapers. I've spent 35 years leaning to use real woodturning tools correctly and I'm not going to give up that skill. I do have a specialty negative rake carbide tool that I use specifically for when I turn Resin.
@robstevenson675Рік тому
I agree. I’ve seen far too many scraped and then sanded to death turnings on UKposts. All the thought goes into clever glue ups or weird wood selection, and very little into skillful tool use. This turner is a master, and the video was wonderful to watch.
@rroe5718Рік тому
@@robstevenson675 Yes, such a great video showing this technique. Wish the author would have verbally given some information as the video progressed such as dimensions, how to layout the 12 holes on the Sphere, and a pattern of the cutting tool. Going to give this project a try, but now must go through my own "Trial & Error" process to get to the goal. Oh well, I'm retired and have the time:)
@DrMerle-gw4wjРік тому
As a newly graduated electrical engineer I went to work for a company which made microwave systems. Microwave systems are more like plumbing, with waveguide connecting the components. Some times we might need a special connector that could be made on a lathe, so in the machine shop there was a special lathe and some tools reserved specially for engineers who didn't know much about lathes but knew the shape they needed. Along with the reserved lathes there were some mostly broken tools to use and the engineers couldn't use any of the good tools. I used the lathe once, and of course broke at least one tool, making a special connector for an odd shaped microwave vacuum tube.
@jonaswhale6451Рік тому
@@robstevenson675 I like Paul Sellers style great perfomance of how to use handtools , its like going back to school days ; )
@PromasterHOFРік тому
When I was much younger, in the early 1960’s I used to watch my grandfather and a couple of his friends sitting on benches along the Ohio river carve stuff like this with pen knives by hand!!! Balls inside square blocks, balls inside balls, balks on double chain links. The stuff the gentlemen could whittle out of drift wood was amazing for us little kids to sit and watch
@HiTechEducationOyРік тому
Nice story! Thank you 🙂
@muqllidagah9336Рік тому
У меня нет никакой техники , но я вручную вырезал .
@meirstern6964Рік тому
Pitty that videro recordig was not that availableon thr 1960's
@janfrosty3392Рік тому
I have seen similar item hand carved by Soviet POW but it had an additional ball inside the inside one. I wish I still had it. Kudos for that craftsman.
@JoshChadwick1Рік тому
The craft and precision here is spectacular! Well done.
@adrianagarcia8426Рік тому
!!!Pero que trabajo más maravilloso y fantástico, este señor es un artista muuui buenísimo felicitaciones y gracias por mostrar su gran obra,,, cariños, CHILE
@NatureLoverReturns2 місяці тому
This reminds me of my grandfather.....always tinkering, whittling, making handmade puzzles for us to figure out, just using wood to make hours of enjoyment for us kids. My favorite game was cribbage played on the board my grandfather made. This video is the most relaxing, fun thing I have seen online in a while. :)
@HiTechEducationOy2 місяці тому
Thanks for the nice story. All the best for you!
@istvangergely454Рік тому
Hihetetlen ! Ha nem látom, nem hiszem el ! Azt hittem valami CNC géppel készült. Gratulálok az ügyes kezű MESTER nek !
@gregonline6506Рік тому
This looks like someone doing pretty complex stuff on a daily basis. Respect.
@philippedamon49808 місяців тому
c'est de grand art! Maintenant je comprend. merci et bravo!
@user-hz4bo9om1xРік тому
Есть же мастера в наше время....хоть поделка и безполезная,но сделать ее далеко не каждый рукастый сможет!!!!Мастер от бога!
@afonsop.silveirasilveira41437 місяців тому
Quanta imaginação. Fantástico. Parabéns.
@SMcCaskillРік тому
Out of all the wood turning videos I've watched this is the most interesting one.
@virginiahorvath58407 місяців тому
Thank you for sharing this amazing wonderment...such skill and beauty...it was magical watching your artistry, I found every moment riveting. I'm so glad I found this and you didn't take the vid down.
@janjacqleonleboxerРік тому
FABULEUX travail ! Il faut aussi des idées et les bons outils ! Mais surtout être adroit et 👍👍 avoir des idées artistiques ! Bravo Monsieur. 😍😍
@DennisSuitters4 місяці тому
Always wondered how those were done, thanks for sharing.
@stevendirks62395 місяців тому
WOW! What precision. Awesome!
@colleenkopp56Рік тому
You are AMAZING! Love watching you create your works of art!
@johnboyle-js8if9 місяців тому
Brilliant, great to see a expert at work. I have just taken it up at 75 wish me luck.
@johnpapadopoulos9057Місяць тому
Bravo. Imaginative craftsmanship.
@user-ol2hk6ce4n7 місяців тому
Es asombroso esté arte
@PotPoetРік тому
Absolutely brilliant work and a stunning and remarkable product - bravo!
@user-vf6zm1cr9wРік тому
Привет из Киргизии. 👍👍👍👍👍
@user-py7vb4sg5qРік тому
Видел такой в Советском журнале "Наука и Жизнь". Кажись за 70-е или 80-е годы.... Только он из нержавейки был. А процесс только сейчас понял. Благодарю автора !
@drgruber572 роки тому
Very cool! You are obviously very experienced and skilled on the lathe! My an ha moment was when you started popping the plugs out! That was a lot of work, making the necessary jigs and plugs and all!
Underrated video... amazing work👏🏼👏🏼👏🏼...I wouldn't figure out how it's done in a million years
@WyMustIGoРік тому
It isn't his design
@VinceBeckerРік тому
Quelle maîtrise, félicitations 👍
@drug.chelovekaРік тому
Интересно. Думаю расчёты,разметка и подготовка приспособ заняло больше времени чем работа над самим изделием😏 Ну а после первой "погремушки" остальные отлетали как семечки.(судя по их количеству)😁
@danschmidt63578 місяців тому
Outstanding work! Thanks for sharing. Do you know if there a formula to calculate the spacing between the hole centers based on the final outer sphere diameter?
@MervynPartinРік тому
I applaud your skill. Brilliant.
@andreamisculini8684Рік тому
Gorgeous work, one of the nicest I've ever seen 🤗🤗
@birdshenanigans8506Рік тому
Gorgeous work pmsl
@user-hb8we2ys2c5 місяців тому
Мастерство превыше всего , респект , лайк !
@coling8176Рік тому
Yeah, I done the same using a rusty penknife and an old fork! Seriously though, this is just incredible...well done mate 👍
@wa4kdcРік тому
My grandfather made many of those & his only power tool was his pocket knife.
@antonioalencar34217 місяців тому
Cara você é o máximo
@seccrecc677 місяців тому
WOW, great stuff
@timmy3344 місяці тому
This is amazing! I watched how you did it and still don't believe it's possible! LOL! Truly amazing!
@thierrylaurent513Рік тому
Thank you for making me feel stupid. You are very talented. I have a master's degree in physics and am incapable of doing what you do. Thank you for sharing.😁😁😁😁
@J-LoeРік тому
I watched you do this, I still can’t get my head around it. Really cool work
@HiTechEducationOyРік тому
Thank you and have a nice weekend!
@PSquaredDesignerРік тому
Now that is some serious talent and skill!
@paulbains9152Рік тому
Brother ,youre a madman ! I learned something today !
@scubadraig4725Рік тому
You sir are a genius. I would love to be this skilled at turning
@rogeriodarocha4779Місяць тому
Amazing work!! Congratulations from Brazil
@HiTechEducationOyМісяць тому
Thank you!
@bijankumar2922Рік тому
Wonderful craftsmanship !
@davidschweikhart4592 місяці тому
This is simply amazing. You are an artist and very talented👍👍👍!
@HiTechEducationOy2 місяці тому
Thank you! www.hitechedu.fi/woodturning/
@prakspmputubeРік тому
What a piece of art! Wow!
@tuna22lm4 місяці тому
Was simply amazing to watch wow.
@magdihassan3978Рік тому
Unbelievable masterpiece of art
@DrMerle-gw4wjРік тому
This man is a genius!
@mr.willowless6881Рік тому
Great job 👍!The procedure is very creative, the curing chisel is hard to make!
@tonixjesse9087Рік тому
Absolutely amazing.
@alex7705Рік тому
Nádhera 👍🏻❤️
@billyfoster3223Рік тому
Awesome! Wonderful work!😃👍🛠️🔧 Great skill!😃🛠️
@billwells8054Рік тому
New lathe? Excellent video, thank you!
@anatolydemch9476Рік тому
умный и рукастый / видел такие китайские / теперь понял как делали
@philipeisenberg6984Рік тому
Amazed. So so praise worthy.
@hussardableРік тому
Woaw impressionnant de maîtrise. BRAVO
@johnmacdougall4545Рік тому
You are truly a master of your craft.
@HiTechEducationOyРік тому
Thank you John!
@user-fw7ie9tp3bРік тому
Просто круто!🔥👍
@daniallemons934310 місяців тому
Mind blown!!! Very impressive. 😮
@javierzampРік тому
Excelente trabajo, cuánto ingenio, felicitaciones
@andrewpassey1769Рік тому
Absolutely amazing 😍
@richardschneider4775Рік тому
Incredible use of woodturning skills to achieve a work excellent in form and function.The math concepts jig and tool making outstanding
@cravatez5218Рік тому
The key for this fantastic work of art lies in the specialy made chisel !!
@suewright9268Рік тому
And a lot of talent. 😊
@rich80379 місяців тому
@@suewright9268 And a lot of patience and practice.
@user-xy1mm2xu1eРік тому
Класс! Просто бесподобно...
@stewartmcmanus3991Рік тому
That's damn clever mate. Must have taken forever to work out the details. Well done, Stewart, south west Australia.
@RayShaw007Рік тому
Very clever and very skilfull. Well done
@mel.anthony8976Рік тому
Truly amazing!
@anthonyskellern5970Рік тому
Great woodworking skills!
@vivianac15926 місяців тому
Felicitaciones, hermoso trabajo.
@user-bm5wy5bk8wРік тому
Респектиращо! Поздрави и от България.
@jessicaeaves19852 роки тому
This is just amazing...I'm loving your videos
@mustofaukir4837Рік тому
Sungguh karya seni yang indah... Smoga sukses selalu.. Salam persahabatan slalu...
@Joregecarpintero7 місяців тому
eso fue muy bueno lo voy a probar en cuanto pueda y te aviso y mando fotos gracias
@silvinooliveira7655 місяців тому
Genial! Isto é que é profissional Parabéns
@user-ht2wt7qs3eРік тому
Видно, что человеку нравится точить.Хороший мастер, виртуоз.Но эти изделия для души а не для заработка.
@ganapathipai8853Рік тому
Meticulously and precision woodcraft. Hats off from India.
@HiTechEducationOyРік тому
Please share this link in India! www.patreon.com/hitecheducation
@gibbogle9486Рік тому
Great craftmanship.
@---fc3slРік тому
Magnifique !
@kampfkater85033 місяці тому
Du bist ein ZAUBERER!!!!!👍
@keelermalmsten33958 місяців тому
Awesome 👌
@davidbryant588124 дні тому
Top work bud
@davidcottrell1308Рік тому
WOW!!! Beautiful.
@user-bt8xk1ff2zРік тому
Я восхищён!
@sjshar1510Рік тому
I watched this 3 times and i still can’t believe my eyes. Great work!
@jimgeelan5949Рік тому
Just found your channel, your one clever bastard 🤭👍 I’m looking forward to the rest of your videos thanks
@johnholder4208Рік тому
UKposts FINALLY suggested something I can get into. Am I ever going to do this? No. Clearly not. Was it worth watching? Absolutely. I can officially say I have now witnessed a MASTER laither.
@aaronwong2507Рік тому
This is good skill. It would be a great skill if you could make a 3 ring version as seen in some museums from ancient crafts men using manual tools. Looking forward to that.
@georgefarrugia8133Рік тому
9
@richardpelland4034Рік тому
Just wow man, amazing!
@gillesetien5915Рік тому
Bravo l'Artiste. Excellent travail.
@jakegevorgianРік тому
Amazing!❤
@woodcravinghd974 місяці тому
amazing wood carving
@Jean_MiРік тому
Ingenious!
@rickcratty63355 місяців тому
You made that look like......well....'yawn, yeah, we'll make this today" haha cool!
@xycocrivellari8020Рік тому
Fantastic! Congratulation!
@pascoalfranciscosposito6638Рік тому
Olá amigo. Excelente trabalho. SHOW. Abraços a 👪 e amigos. Ok
@richisseite6598Рік тому
Respekt 😲😲👍👍👍 Sehr schöne Arbeit 🙏👏👏👏
@carrollbestpitch9924Рік тому
That is awesome!!
@mikealman9259Рік тому
Fascinating to watch, a TRUE craftsman. Liked, subbed etc 👏👏👍
@williammccoy6297Рік тому
Incredible craftsman.
@craftsmanwoodturnerРік тому
Great to see someone picking up the mantle from the late David Springett.
@HiTechEducationOyРік тому
Hi Richard! David has inspired me to turn special pieces last 30 years. I didn't know about his passing. I solved the next piece of wood myself and it was difficult. ukposts.info/have/v-deo/koGrbXuBiY56upc.html
@davidcostantino1838Рік тому
So, you just started turning a couple weeks ago? Very impressive, nice work.