Over the course of nearly 60 days I just returned 3 brand new M-A's back because of dust in the viewfinder straight out of the box. was told the replacement would be specifically c checked by their technicians before sending out again. Their technicians must be blind -Never again - Luxury brand with dogshit QC
@emanuelrojas41942 роки тому
Añzoxqoosoala
@Valentino_Cilantro3 роки тому
I have same everything, bike, junction A and WU111. I placed it under the handle bar so it doesn’t rattle in the frame. I cannot get it to pair. It’s asking for a password, 000000 doesn’t work. It’s a new piece. Anyone else is having this issue? How did you correct it?
@Darrenmccall743 роки тому
I changed my password but I found I was putting in more digits than the password so double check the inputs.
@marcrascolnicov80503 роки тому
nasty and loud music
@Dulence963 роки тому
can you please write down all cables and junction kit we need to buy to make dogma f10 di2 bike?
@elianemagluta44013 роки тому
Have you experienced battery drain after making this process??? I used to have my dfly installed inside my handlebars and battery was great.. then I bought new integrated handlebars and had to install like you are teaching in the video. Added an JC200 to connect the Y cable (which fits inside the handle bars) and installed the dfly in the junction exactly like you are teaching in the video. The next day my battery started draining 10 to 20% a day even when not using the bike... removed the installation and went back to the original set up without the jc200 but now the dfly is outside the bike.. battery still drains even when not in use. Don’t know how to fix it. Any ideas? Thank you for the great content.
@Darrenmccall743 роки тому
Yeah I installed this on my Boardman SLR9.6 DI2 Ultegra. I had a battery go flat and got a replacement through warranty. But I found battery drain was a real issue as I had my EW-WU111 installed in my seat down tube. I have taken it out and mounted it in front of my old style junction box and simply unplug it when off the bike and just reconnect when I want to ride. To be honest it’s not bad looking you really don’t see it under the stem and so far it works I suppose the only issue may be wear and tear unplugging but I don’t see any issues so far. I hope this explains it if you need and pictures or explanation just contact me hope this helps.
@emanuelrojas41942 роки тому
@@Darrenmccall74 as
@FordChristmas4 роки тому
what's the extension cable model number ?
@A_L_0075 років тому
you have to wind the two red dot to the arrow direction until it tighten the film, then rewind. This is a common mistake and a lot of people think its fault, in fact its not.
@kuntosemeru12404 роки тому
Did he reviewer read the manual in 1st hand so lol
@ErwinKindangen3 роки тому
The problem wasnt in rewinding the film. It's the film not advancing when cocking, though the film counter advances.
@ErwinKindangen3 роки тому
No :-)
@nautiques10006 років тому
Is the main junction that mounts in the frame the same as the handle bar mounted junction. Just using a bracket to hold it in the frame?
@roddytjahyadi40873 роки тому
Yes it is the same
@kinfuic6 років тому
what's the extension cable model number ?
@davesurf206 років тому
You should have wrapped it in bubble wrap - that suckers gonna rattle!
@ErwinKindangen6 років тому
davesurf20 yes. I wrapped it with a sponge tape.
@fikrisk84066 років тому
Still blur about this. Mine is ultegra 6870. How to install
@kenhadiwidjaja72916 років тому
Nice presentation Bro...
@MrScientist0006 років тому
Hi Erwin, I have the same bike... and I'm between EW-WU111 and EW-WU101. Which is better? And the EW-WU111 can connect with garmin 1000 or 820?? Thanks...
@ErwinKindangen6 років тому
Loucas Soulos From what I know the WU111 can connect with both Bluetooth and ANT+ while the WU101 can only connect with ANT+. Not sure whether it can connect with Garmin as I dont use Garmin. But it does connect to my Wahoo Element.
@WijayaMLim8 років тому
wah.. buat video kapal di laut kayanya boleh. ni bro..
@ErwinKindangen8 років тому
I'm on my third MA now. Its a nice camera with some quality issues (bayonet a bit lose, film advance issue, lose shutter release button). MP has much higher quality.
@vangstr7 років тому
I've never encountered any issues with my MP.
@lorincszabo95263 роки тому
Hello! I'm thinking about buying a new Leica film camera, I saw your problems with it, can you give me advice which one should I buy? M-A or MP? What was your problem with the M-A, outside of this? Any other issue? Thank you very much!
@ErwinKindangen3 роки тому
@@lorincszabo9526 I've never had issues with the MP. Other than the issues about film advance, I've never had any issue with the M-A. In my opinion, the M-A handles better and got some nice design touches. The MP is heavier than the M-A. With the M-A, you also don't have to worry about replacing meter battery, though the MP can work just as well without the battery. Tough call, both are great cameras. I would go with the M-A.
@powderedtoastman30932 роки тому
€4500 worth of issues. Wtf
@rauljohnpaul8 років тому
What's the status on this, really thinking about getting the MP instead
@ErwinKindangen7 років тому
Raul John Paul Perez Ok its been a year. I had my camera fixed in Leica Tokyo. It worked fine after that. Not sure what they tweaked or if the did anything to it at all. But last week it happened again. I knew it when the film counter reached 38 and I could still happily snapped and advanced the film. I guess you just have to keep shooting until it really reached the end of film and you cant advance further. Forget the frame counter.