Cool! I'm the designer of BMO dock stand (selled by Made In urbana and other ^^') I really like your version, especially the addition of a compartment to store the cartridges, great job!

How do you do what you did in gimp? Is there a nane for it.

I disagree with this method of testing. Each filament in the real-world would be individually used and calibrated for it's required flow dynamic, flow rate, nozzle temperature, bed temperature, and speed. Just because they're all PLA doesn't mean you should just throw them all into a mixed bag and print them all the same. That's not how someone, who is using their 3D printer effectively, would print with it - so the test is void.

It’s the Fliptendo Switch!

This video has been so helpful!!!

3ds pro

Si you Knie How to do the z axis

ilovet i want

Even i dont own a switch i need it

How much for this?

Now make one for the dsi and make it so you can have two switch’s in for multiplayer

I'm not the biggest fan of how the game cards sit in there, you could have them sit flat and flush or you could make it a bit thicker and hollow to add a battery pack. The it would be just a bigger GBA SP.

The Xbox portal

This is so fire 🔥 I wanna order one now but you kno life responsebileries

Is there any way to sell one for the OLED model? The screen size is slightly wider. I'd buy instantly if it's possible.

This is a precursor to the Switch 2 AKA the Switch Flip™

5:43 is that one of those fancy ratchet screwdrivers?

Hell yea brother 😎

Putting your logo on the back of the Switch would look cool too if you can avoid the fans to prevent heating issues.

This is crazy cool. I have been wanting to get a bamboo printer but I'm always hesitant on switching.

Hola buenas noches. Tienes vifeos donde cortas y grabas acrílico?

hi, Top Vid, but I was just wondering (Stupid question on the way)......Can the Pi-3 support touchscreen? I have an old 14" touchscreen from a broken Laptop. Could I make one out of that? Sorry, please excuse my lack of intelligence. I couldn't engineer and build a spacecraft, nevermind this!

Doesn’t get hot enough :/

Which filament brand is the most reliable. That’s what I want to know. The rest I can do on my own.

It’s nice hitting print and actually walking away after glue stick is applied.

Part 2 pls mr habib x

Ive bought a bundle from creality. Its the black and white one. Idk if I got a bad one but since using the black one I've been getting stringing issues and clogs and makes some pops sounds and been making my ender 3 pro extruder skip notoriously bad. So idk if I just got a lemon one or if its been overly hydrated from the unusual weather changes in socal 😅

I am not very good at raspberry pi yet, so why not use raspberry pi zero 2w or compute module?

Hi, ik the Video is 2 years ago now but could you pls design it as a floating keycap?

This meme deck looks very better then the steam deck i was never a steam deck fan anyway

I’ve spent hours trying to get my z-offset right…I’ll have it perfect, then when it goes to print it’s waaay too high wtf…on top of that the auto level sucks and my mesh is uneven

The start: *Nintendo Switch SP*

Wait, so we don’t even have the heart to make someone 4th?? 😂, good, job on the comparison, I’m sure it took some time.. try temp towers because that ender filament might have been absolutely flawless at 210 degrees, and the pla+ may have wanted a completely different temperature., at a minimum, run the manufactures recommended settings, and buy a heat gun to confirm your machine is accurate, although the temp tower is calibrated to your machine automatically, and no need for temperature gun, or any means of calibrating the gun itself…

I’d guess if someone wanted to invest the amount of time to compare 4 brands, the first step would be to get your printer dialed TF in..

So all you are showing is, if you want to print a white pla and it has to be printed at 205 degrees, and you only have these 4 options, here’s the best choice

can i use solder to do this?

Is a brim better for a glass bed? I just got one

ive been trying to do this for 4 hours now. It wont give me the option to do a sweep cut :(

Cardboard spools are a NO-GO for me if using AMS or running my filament from a dryer directly to the printer. The relative humidity reading is through the roof on my dryer with cardboard spools. I haven't used many brands but I find Esun to be great. I will be trying Hatchbox in the immediate future because I have plastic spools.

You just threw that nugget of knowledge about curing in water first in there mid-sentence; this is vital info. Please make a video about your cleaning and curing process.

Good idea, but why didn't you 3d print a spacer for placing the parts?

Looks sweet!

Nice job! Excited for the next videos!

First 🎉

Looks like Batman's Steam Deck.

Thx man, u help me !!! peace!

A little goofy looking, but nice!

I spent literally 5 hours trying to figure out why my prints weren’t dragging and I almost threw away my CR Touch. Thanks to this short, I realized that I forgot to set my z offset and now it works like a charm! THANK YOU! 🎉

When I print keycaps on my printer It always falls off or I always have problems with supports any tips?

Thanks for posting all this information...I've been struggling to find useful help with the Mole and you've helped a lot!