Everything to know about 200w Pulsed Laser Cleaning Machine by Fortune Laser

День тому

Today I’m answering every question about the 200 Watt pulsed laser cleaning machine by Fortune Laser.
First I’ll go over the advantages of pulsed vs continuous wave machines.
I’ll also do a demonstration and show you how well it cleans rust, paint, grease and more, as well as some tips to keep it working efficiently.
Last, we’ll talk about pricing.
Fortune Laser provides different laser machines with different laser power and price ranges. Below is the FL-C200 I reviewed:
www.fortunelaser.com/fortune-...
Whether you are interested in laser cleaning machine, laser cutting machine, laser welding machine, or other laser machines, don't hesitate to contact Fortune Laser for the best solution and the latest pricing!
Instagram: 6th_gear
6thGearGarage

КОМЕНТАРІ: 82

@charliecoco2115 Місяць тому

I'm waiting a few years until Dollar King are selling them for $100.

@BenMitro Місяць тому

And they weld too.

@capeman10 28 днів тому

😂, me too.

@BenMitro Місяць тому

I didn't know such machines existed. Thanks for demonstrating how it all works so clearly.

@6thGearGarage Місяць тому

Thanks for watching! I think they will become more common in the future.

@BenMitro Місяць тому

@@6thGearGarageAs is almost always the case when something is effective as you showed this to be. What's the saying? "The cats out of the bag"!

@davewarrender2056 22 дні тому

I follow a military vehicle restore channel , based here in the UK , I wish they'd buy one of these things , instead of pissing about with hydro blasting , chemicals and needle guns when removing paint and rust from small vehicles like cheiften tanks ect. A job that would take days , could be done in hours.

@6thGearGarage 21 день тому

Not cheap, but they do pay for themselves pretty quickly in time saved.

@capeman10 28 днів тому

Thank you for sharing your knowledge and experience with me and the community. This was one of my favorite episodes.

@6thGearGarage 28 днів тому

Glad you enjoyed it! You’ll be seeing this machine in a lot of my videos. It saves so much time!

@Tankysan Місяць тому

This thing is super cool!

@aerialrescuesolutions3277 Місяць тому

Interesting, thanks for the review.

@6thGearGarage Місяць тому

You bet

@jaredm450 Місяць тому

I want one of these - so bad! I can't justify that much for my personal use, but it doesn't stop me dreaming. Excellent explanation too! That answered questions I didn't know I had.

@6thGearGarage Місяць тому

If I wasn't able to write it off for business, I would have gone with one of the lower priced models :)

@theayatollahofrockandrollah Місяць тому

great demo....holy shit 9 thousand bucks....not in a 9 thousand years

@6thGearGarage Місяць тому

Thanks! Also, they have less expensive ones too.

@JC-bx3bg 15 днів тому

Man you have no clue how much money you could drum up in business and how many different jobs you could do with this thing. This is the future of cleaning so if you invest 10 grand and get your ass up you can pay it off in a month

@theayatollahofrockandrollah 13 днів тому

@@JC-bx3bg yeah fuck all that

@crabbinmoose8583 8 днів тому

@JC-bx3bg yeah, and have the government that regulates everything receive a bunch of taxes off the purchase of this machine and the business it creates? I'm with the previous commenter on this one. Besides, the people stealing our money and ambitions have no problem making more slaves from people who purchase on credit so let them hire the guy with the wire brush and continue to lecture us about saving the planet from all their manufactured pollution and war games. Done.

@DirtGarage Місяць тому

Thats a fancy dancy tool!

@behemothinferno Місяць тому

I'm considering a similar unit for my metal fab shop. Is it good at removing mill scale and oxidation from welding/cutting? Also, will I be able to forgo a sand blasting cabinet with this unit?

@6thGearGarage Місяць тому

Oxidation, absolutely. Mill scale, I’m not too sure. Slightly different situation, but when I showed the scaled rusty frame example, the rust was removed from the surface of the scales, but when I scraped them off, there was still rust underneath. I would contact Fortune Laser and see if they have a machine that might remove the mill scale. Maybe they have a continuous wave machine that can do this? I have a small blasting cabinet that I’m considering getting rid of but still might use it for smaller heavily scaled rusty parts like control arms, knuckles etc.

@lorenalara2306 10 днів тому

@6yeargarage What is the training needed to be able to use one of this machines? Thanks!! 😊

@6thGearGarage 9 днів тому

No training is really needed, it is very simple to learn to use after reading the instruction manual. Understanding the parameters and modes helps as well.

@ken7961 16 днів тому

I would buy one if I could think of some side hustle that I could use it on to help pay for it

@returntochrist777 19 днів тому

Awesome video. Can i ask.... Do you know? Will this clean masonry, driveways/statue's?

@6thGearGarage 19 днів тому

Yes it absolutely will, although it would take a very long time to clean a driveway with this particular machine.

@returntochrist777 19 днів тому

@@6thGearGarage Dude thanks for getting back. Really appreciated. And yes. It would be time consuming for sure. But I keep thinking you could get a shed load done in an hour. The video I witnessed was from overspill of rust removal. The concrete literally went "BING" in seconds.... Thanks again. Interesting stuff....

@6thGearGarage 18 днів тому

@@returntochrist777 A continuous wave machine would be much faster for larger areas like a driveway.

@user-eo5bu6by4s 29 днів тому

😊Great bemo, My friend purchased a 200w pulse laser machine and didn't get any settings for it, would it be possible to get the settings from you for the different types of materials if it's not too much trouble. We would really appreciate it as we are starting a new laser cleaning service. I live in Ireland so I'm not in opposition to you 😊. Regards Michael O Shea

@6thGearGarage 28 днів тому

Sure, what is a good email to send them to?

@Hydrazine1000 8 днів тому

One question: what's the expected service life of the laser itself? When these type of devices came onto the scene a few ago (with continuous laser, I assume) the laser would gave, say, a 5000 hour service life before needing replacement. Pulsed and lower power likely will have remedied this.

@6thGearGarage 7 днів тому

That's a great question and I'm unsure of the answer. Keeping the machine clean is the best thing to extend its service life.

@GleepGlop2 Місяць тому

I could see paying to have the underside of my vehicle laser cleaned. Id pay extra for the first person laser cam footage too lol.

@6thGearGarage Місяць тому

I will say... DON'T laser clean anything rubber lol. I learned that first hand.

@acctekchinadeedy Місяць тому

good job, is there 300W 750W 1000W available？

@6thGearGarage Місяць тому

Thanks, They have a 100, 200 and 300w pulsed machine. I think I might have seen a 500w too. Their continuous wave machines start at 1000w.

@Joleneli 14 днів тому

Do you still need one set laser cleaning machine, sir? This is Jolene from TIPTOP laser. Always serving in the laser cleaning industry, paint, rust, stain and others attached to different materials can be washed away with laser. Do i have a chance to talk with u? believe our price will appeal to you. )))

@james10739 14 днів тому

I think for a similar price you can get the one that welds as well

@6thGearGarage 13 днів тому

Actually a lot cheaper! I initially looked at the 3-in-1 welder/cutting/cleaning machine, which was about $3k cheaper. It's a continuous wave laser though, so the cleaning isn't as good for certain surfaces. I already have a mig welder, so I really needed a machine to do cleaning.

@danielnicholls6868 21 день тому

will it remove slag from stick wellding?

@6thGearGarage 21 день тому

I have not tried it personally, but I read that it can.

@danielnicholls6868 21 день тому

that would be a big time saver

@Merrin-gh5sr 3 дні тому

yes

@zafar78600 11 днів тому

what about using ultrasound?

@6thGearGarage 11 днів тому

I did do some testing with an ultrasonic cleaner to see what it could remove, and it didn't do very well at rust or corrosion: ukposts.info/have/v-deo/r3miibB8aqp2tZ8.html

@drewfleming7065 Місяць тому

Does a great job on aluminum....looks like new and its so hard to get that way....and my truck has to be white....

@6thGearGarage Місяць тому

The aluminum is the most fun to clean because of such a huge difference in the before/after.

@tukn22inch 8 днів тому

Would this work to remove powder coating from alloy wheels? Would the next size down be enough for just wheels?

@6thGearGarage 7 днів тому

@@tukn22inch It would absolutely remove powder coating. Gloss white will take a little longer than other colors. Black will remove the easiest. A 100w machine should be similar to the 200w machine, it will just take more time to clean due to less power.

@iangray7107 8 днів тому

Hey dude, good presentation, could you please send me the contact information for your supplier. Well done.

@6thGearGarage 7 днів тому

Thanks! You can email Jason at jason@fortunelaser.com. I also have his WhatsApp, if you prefer to reach him there.

@davidschexnaydre7012 20 днів тому

Why does it come with a 110 plug if it needs 220?

@6thGearGarage 20 днів тому

I'm guessing because most of the world only uses 220, while North America uses 110 and 220, and they ship these world wide.

@Hydrazine1000 8 днів тому

Minor nit-picking @2:24 The laser energy _ablates,_ not _abelates,_ all the crud, paint and rust. "Abelation" has an "e" too much. Sorry for my OCD acting up.😅

@6thGearGarage 7 днів тому

Thanks for the heads up! This video was the first time I had ever used that word lol, I'll remember that in the next video!

@TheDutyPaid Місяць тому

It's a shame they do not just list the prices. How much you ask, well how much you got.

@6thGearGarage Місяць тому

I noticed that none of the laser companies list the prices on their website. I think it's because the technology is constantly evolving and they're getting cheaper. Also depends on your location because they cover shipping/tax/customs fees.

@sniper60605 10 днів тому

Are you making any money with your laser or do you just use it in your own projects?

@6thGearGarage 9 днів тому

I’ve only used it for my own projects so far. If I get some spare time I might try to do some side jobs with it.

@charlesballiet7074 6 годин тому

ughhh no chemicals involved shure but atomazing oil resedue and paint aint exactly healthy to breath either

@Greggspies 4 години тому

Will it be effective on my underpants

@BLKBRDD 5 днів тому

yeah theres no chemicals in the process but the by product is the chemicals in the burnt off materials. Iron oxide is carcinogenic

@Giroux68 Місяць тому

Hell yeah ...the price will drop on those just like 3D printers and CNC machines.

@ThatGoat Місяць тому

both of those still cost an arm and a leg....

@6thGearGarage Місяць тому

I can't believe how much the prices have already dropped since 2020 when they were $100k. I think in a few more years it won't be uncommon for diyers to have one of these in their garage.

@Hydrazine1000 8 днів тому

Don't hold your hopes up too much. It's in part thanks to 3D printing... sorry, _additive manufacturing,_ that the prices of industrial lasers have come down tremendously. 200 watt is a nice laser output power for an entry level powder bed selective laser melting (SLM) metal printer. Both types of devices benefit already from large drops in laser cost.

@spatulaman2753 Місяць тому

I was interested all along, thinking maybe priced like high end plasma cutters for example but then…..the price. Stopped the video right there.

@6thGearGarage Місяць тому

Understandable... I'm lucky to be able to use this as a write-off. They also have less expensive models on their website.

@Joleneli 14 днів тому

@somborn Місяць тому

One second of not paying attention and you and everyone in the room is blind. Permanently. No thank you Sir.

@6thGearGarage Місяць тому

I wouldn't be too worried about that. Just wear the glasse, don't clean in a room full of people, and don't let people put their faces next to the surface being cleaned and it should be fine.

@somborn Місяць тому

You are completely delusional. This is at the very least a laser class 3 machine. Even a reflection from across the room would blind anyone. There's a reason for very high safety standards when working with lasers. Clowning around in your garage with china laser goggles is NOT safe in any way.

@tukn22inch 8 днів тому

It only has strength for a few inches as he demonstrated in the video. So I do not believe it would blind anyone unless you put your eye in its target zone.

@ripvanwinkle9648 11 днів тому

Change your vocal delivery a tad, and you become Christopher Walken.

@6thGearGarage 10 днів тому

I gotta have more cowbell!

@scp2621 Місяць тому

So cool. The only good thing about living is southern commiefornia desert is rust isn’t really an issue here.. but man that 😊laser is hella sweet to watch remove rust

@6thGearGarage Місяць тому

It sure is. Also, I need to buy my next project vehicle from down there!

@roz7.62 2 дні тому

Less talk, more laser

@6thGearGarage 2 дні тому

Check out my YT Short videos. I have some more laser cleaning vids there. I also used it in the engine paint video to clean the block, head and accessories.