#NewProducts

День тому

Small Pink Anti-Static Zip Top Bag - 2" x 3" - 100 Pack (0:09)
www.adafruit.com/product/5935...
Pixelblaze V3 Standard XL - WiFi LED Controller (0:37)
www.adafruit.com/product/5942...
Pixelblaze Sensor Expansion Board (1:40) www.adafruit.com/product/5944...
Pixelblaze V3 Pico - WiFi LED Controller (2:27)
www.adafruit.com/product/5943...
Adafruit USB Host BFF for QT Py or Xiao with MAX3421E (3:07)
www.adafruit.com/product/5956...
Adafruit DVI Sock for Pico - Works with HDMI Displays (5:11)
www.adafruit.com/product/5957...
-----------------------------------------
New nEw NEWs New Products, News, and more: www.adafruit.com/newsletter #newnewnew
Shop for all of the newest Adafruit products: adafru.it/new
Visit the Adafruit shop online - www.adafruit.com
Adafruit on Instagram: / adafruit
LIVE CHAT IS HERE! adafru.it/discord
Subscribe to Adafruit on UKposts: adafru.it/subscribe
New tutorials on the Adafruit Learning System: learn.adafruit.com/
-----------------------------------------

КОМЕНТАРІ: 8

@kyleallred984 10 днів тому

New new new new new new new new new new new new new new new new.

@billneisius6778 5 днів тому

The pink plastic bags have an "anti-static" coating so that when you rub against them it doesn't create a static charge (the triboelectric effect). Unfortunately that coating wears off, so that when you rummage through the pink plastic bags in your parts box, it generates a significant static charge. To provide static protection, you need the black static dissipative bags. Adafruit packages static-sensitive parts in black bags, and non static-sensitive parts in pink bags when they might be stored near static-sensitive parts.

@davidharms3562 8 днів тому

Highlight of my week! Thanks AdaTeam! Love the new products!

@davidadams421 9 днів тому

Always inspiring.

@sbheavyken 10 днів тому

The pad placement for the headers on the pixelblaze is wonky. They stagered. You can see it if you look at the pads vs the silkscreen. Holes look big enough that hates should fit though.

@MMuraseofSandvich 10 днів тому

Probably designed that way to lock in header pins before soldering. Sparkfun has a "locking" header footprint for EAGLE/KiCad that does the same thing. It's OK, but it makes repair a bit of a pain. Best approach to removing the pins is to cut up or remove the plastic bit holding them together, and remove them one by one.

@sbheavyken 10 днів тому

Totally agree on removing pins that way if using a soldering iron. Same with many other multi-leg components. Some day maybe I'll get a hot-air gun and see how that does.