Assembling a 500HP Miata Engine From The Bare Block, ASMR Style.

  Переглядів 1,204,876

TheCarPassionChannel

TheCarPassionChannel

День тому

#asmr #lofi #mazda #miata
By popular demand, here is the FULL parts list for the engine:
www.thecarpassionchannel.com/v...
Since I already have a full engine build series, I didn't want to make repeat content, but still wanted to showcase the work that went into this thing. So I ended up spending weeks making this instead lolll. Keep in mind, this video is just for entertainment, and does not show the other half of what goes into building an engine, aka taking all of the measurements, modifying parts to fit, cleaning everything piece by piece, etc. What you see here is basically the fun part! If you'd like more info on the engine build check out the technical blog here:
www.thecarpassionchannel.com/v...
----------
Support TheCarPassionChannel on Patreon!
/ thecarpassionchannel
Want to make a one-time donation? You can buy me a gallon of E85!
www.buymeacoffee.com/carpassion
Interested in having a 1 on 1 video call? Details below:
thecarpassionchannel.as.me/
What’s that digital gauge in the dash?! It’s called a CanChecked and you can pick one up from my friends at Bofi Racing!
bofiracing.co.uk/?ref=7465 (Car Passion affiliate link)
Get yourself a Dragy! (Affiliate Link)
dragymotorsports.com/?rfsn=65...
Check out my Amazon Store!
www.amazon.com/shop/thecarpas...
Use coupon code CARPASSION50 to save $50 on your first High Performance Academy course!
hpcdmy.co/cp10
---------
0:00 Bearings & Crankshaft
3:11 Pistons & Rods
8:24 Oil Pump & Pan
14:37 Water Pump, Harmonic Balancer
16:37 Valvetrain & Cams
19:35 Head Gasket & Head Install
21:56 Timing Belt, Plugs, Oil Filter
23:10 Covers
24:24 COPs & VVT
27:25 Intake & Exhaust Manifolds, Fuel Rail
28:57 Final Product

КОМЕНТАРІ: 988
@stinkydoggy98
@stinkydoggy98 6 місяців тому
No blah blah blah talk, no annoying music, no selfie stick where they film themselves more than the work. No this is just straight to the work. Perfect! Looks awesome. Subbed.
@teamgonzo9289
@teamgonzo9289 4 місяці тому
Nailed it!!! 👍
@williamsiniovosa4945
@williamsiniovosa4945 4 місяці тому
This is the best engine build i have seen in while ❤
@__mehdimt__
@__mehdimt__ 3 місяці тому
Absolutely i hate those videos that they talk with their annoying voice and saying about the process that we’re watching it with our eyes This one was perfect thank you 🔥🔥🔥
@Gizmos_and_stuff
@Gizmos_and_stuff 3 місяці тому
i found the music pretty annoying, but otherwise yeah!
@xkasxprox
@xkasxprox 2 місяці тому
This was what I was looking for, need more long ones for my second monitor content!
@mrfixall
@mrfixall Рік тому
I have to say that that was like watching an artist work, And create a work of art, worthy of any museum. Pretty excellent for a guy that's taking a break. Well played.
@jefftoonstra5087
@jefftoonstra5087 Рік тому
And not having a big shop to work out of. Can’t wait for dyno day!
@dgcmusi
@dgcmusi Рік тому
A lot of knowledge right there….love watching it..
@JohnKickboxing
@JohnKickboxing Рік тому
Hey ... by the way, is this engine turbocharged?
@BWORKS2203
@BWORKS2203 Рік тому
@@JohnKickboxing yes it is
@JohnKickboxing
@JohnKickboxing Рік тому
@@BWORKS2203 👌
@Luckde10
@Luckde10 Рік тому
Greg, your techniques have become far more refined since the fist build. Looks far more surgical than your earlier builds. Look forward to the day on the dyn.
@MultiFerrarifreak
@MultiFerrarifreak Рік тому
Yesssss exactly what I needed right now! Thanks for taking your time to produce this great content for us :)
@kurkkobain
@kurkkobain 8 місяців тому
what , just joining aprts,, dude thas nothing you dot make a racing engine tyat way,
@crumpets19
@crumpets19 Рік тому
Daddy Greg bringing home the bacon yet again
@potymouf1
@potymouf1 Рік тому
On valentines day no less. HE DOES LOVE US! lol
@DaeCRG1
@DaeCRG1 11 місяців тому
don’t ever say that again bro..
@andynguyen1969
@andynguyen1969 9 місяців тому
u
@caseykelso1
@caseykelso1 7 місяців тому
Do you even have a clue that it works? Do you even know the guy?
@henryhooker3282
@henryhooker3282 7 місяців тому
You okay? Are you gay?
@RaiLosTHisMind
@RaiLosTHisMind 6 місяців тому
Words cannot describe how satisfying it is watching an engine be assembled. All while being educational. Please make more of these the exact same formate exact same music. It would be much appreciated 🙌🏾
@andrewyang60
@andrewyang60 Рік тому
I’ve been watching for years but never commented. This video was absolutely fantastic. You have gotten so good at your craft, both in building and capturing/editing. Love your videos, keep them coming!
@mazdamiatafied
@mazdamiatafied Рік тому
Beautiful work Greg, hypnotizing. Your cinematography has gotten so good!
@dinokolonic9716
@dinokolonic9716 Рік тому
This is like the best lego set in the world. Watching that whole camshaft assembly get put on top of the block was like building a lego and it makes you take a detour to build a different part and then you put it all together and it looks amazing. This is truly one of the best things I've watched.
@Cairo5555
@Cairo5555 Рік тому
Wow, you outdid yourself on this video Greg. Well done it's such a nice video to watch and love the background music. :) Keep up all the good and hard work!
@erictol
@erictol Рік тому
Thank you Greg for all your inspiring videos. This one could not be better timed, I currently putting together my shaved 2001 VVT block for my 10AE. Keep doing what you do!
@38tech
@38tech Рік тому
Bruh, the chilliest half hour of yt ever. Thanks, that was very relaxing.
@twostorywood
@twostorywood Рік тому
Amen
@alanscott156
@alanscott156 Рік тому
My guy got all the good angles. It's reasonably laborious to do an engine build but to spend the time to film it in this way ON TOP of that is seriously extra. You have above and beyond discipline.
@crossfiregaming6332
@crossfiregaming6332 Рік тому
can we please point out that 1 handed hex key skill. I have never seen anyone do it so smoothly!
@Spademonkey
@Spademonkey Рік тому
Happy to see this coming together man! Always stoked to see your builds and the directions they go! Keep it up!
@HaworthJimmy
@HaworthJimmy 9 місяців тому
The parts list and details you’ve provided are fantastic. So much research and planning given away to anyone on a similar journey with their Miata. Good on you ❤
@IllIlIlllIllIlIl
@IllIlIlllIllIlIl Рік тому
This is the first video I've watched from start to finish, no bathroom breaks or nuthin' Just remember Craig, with this much power comes great responsibility
@neddleman26
@neddleman26 Рік тому
A video I will watch many times in the future. Thanks for the outstanding content! I know this added a lot of time to the build!
@stephenhawkingMLG
@stephenhawkingMLG Рік тому
Using your videos as a template for my own built motor miata. Really appreciate the depth and detail as you’re pushing the limits of these BPs! Hope soon people will start to see the potential these motors have and how much cheaper they are to build than other motors!
@justrelaxing1501
@justrelaxing1501 Рік тому
Man I loved this video! No talking, just heads up explanations of what various parts were and attention to detail. Thanks for sharing this.
@williamkelly2467
@williamkelly2467 5 місяців тому
I find myself always coming back to this video. You sir have crafted the absolute most perfect engine build video I have ever seen. Thank you!
@TheCarPassionChannel
@TheCarPassionChannel 5 місяців тому
I appreciate you!!
@lucusc4002
@lucusc4002 Рік тому
The video I did not know I needed, engine building is always a joy to watch.
@ninjaStalker069
@ninjaStalker069 3 місяці тому
"cries in poor" man, i felt that on a spiritual level LOLOL
@bobbyjackson2564
@bobbyjackson2564 Рік тому
Cinematic masterpiece from start to finish. Giving me the motivation I needed to get going with my turbo build. Also, you really did flex on everyone with the one handed allen technique 10/10
@jdroller-cruz4296
@jdroller-cruz4296 Рік тому
great content, Greg will always be a legend in the miata community
@elijahbakker1513
@elijahbakker1513 Рік тому
I'd also like to add that your quality of work has increased astoundingly! I was rebuilding my first motor around when you started your big red and I've been working in the industry since. I build race motors for motocross bikes and you have done just as much as our highest of quality builds. If you do end up reading this, much love ❤️
@TheCarPassionChannel
@TheCarPassionChannel Рік тому
I think you might be getting confused, the "updated" VVT head gasket from Mazda has smaller openings for the front coolant ports, but this gasket has full sized openings. There is nothing blocked off in the rear with any head gaskets as far as I know
@elijahbakker1513
@elijahbakker1513 Рік тому
@TheCarPassionChannel yes, after looking back into it, you are correct. Just making sure you're on your toes 😉 I'll edit it subsequently after this reply
@TheCarPassionChannel
@TheCarPassionChannel Рік тому
@@elijahbakker1513 You had me looking back at my own footage too, hahaha
@arimaoutdoors8255
@arimaoutdoors8255 Рік тому
After building a few turbo Miata’s years ago it’s fun to see the whole process done again. Takes me back to the early 2000s. Thank you
@MapexMiata
@MapexMiata Рік тому
This was so incredibly satisfying; thank you for taking all the extra time and effort to create this video! You're the man!
@darkengel1210
@darkengel1210 Рік тому
Nice to see the use of Nord-Lock Parts in this Engine, they just work!
@FDB77
@FDB77 Рік тому
I may not have anyone for Valentine's Day but at least I have Miata Dad and my NB :) Thanks for the relaxing video Craig.
@roderickmacdonald2389
@roderickmacdonald2389 7 місяців тому
That was one of the most relaxing engine builds I've seen could have this on loop!
@ryandeweese363
@ryandeweese363 7 місяців тому
One of the best put together engine and video builds I've seen in a long time!! Very well put together, and can't wait to get started on my next engine build!! Last one was a 2008 4.7, Super smooth!!
@SuperDafi1980
@SuperDafi1980 Рік тому
A little greeting from Denmark, A real pleasure looking at Greg, keep up the good work 😃👌👍
@flipflop7577
@flipflop7577 Рік тому
Stunning!! 🥹Absolutely STUNNING video!! Perfect music choice, very relaxing yet soothing to watch and listen to! Now I can go to bed and dream about miatas and highpower BPs😴🤤
@lindkvistandreas
@lindkvistandreas Рік тому
This is going to be epic man!.. thank you for sharing and looking forward to see testing and tuning on this!
@philjones5728
@philjones5728 Рік тому
I LOVED this! Strangely very satisfying. Well done with all the editing that must've gone into this video 10/10
@valdirjose7118
@valdirjose7118 Рік тому
Incrível trabalho de montagem do motor, parabéns pelo desempenho, habilidade e competência!
@MultiMinors
@MultiMinors Рік тому
What a beautiful engine
@badjoe985
@badjoe985 Рік тому
from the build to the editing, great job. I've loved it, thank you
@1987RX7TII
@1987RX7TII Рік тому
This was so calming. On one hand, I’ve done most of what you’ve shown here except for installing pistons or taking out valves and keepers. Watching you do the whole engine almost makes me want to build a long nose 1.6 I have laying around in my basement that has mild rod knock. But then I’ll need to buy all the expensive goodies and convince my wife the car needed it. Haha. Love to see it.
@Laz_Arus
@Laz_Arus Рік тому
It sure looks easier to replace the timing belt, water pump and main seal when the engine is on an engine stand than what I had to endure changing those parts while the engine is in situ.
@kylelambert1672
@kylelambert1672 Рік тому
Same here. Speaking of which @thecarpassionchannel I saw in this video you slid the woodruff key towards the crank pulley after it's back on. In the timing belt video I don't remember you mentioning that
@kylelambert1672
@kylelambert1672 Рік тому
Mine never came off the crank nose and just chilled there the entire time I was replacing stuff. And my pulley parts just went back on but the woodruff key still didn't move
@Patrick94GSR
@Patrick94GSR Рік тому
working on an engine on a stand is an absolute dream compared to bending over or laying around on the ground underneath the car. I've done my timing belt in the car, and also dropped the trans and changed the clutch under the car. Now I have my whole engine and trans out of the car, and it's so much easier.
@nic1586
@nic1586 Рік тому
wow someday ill have enough money to build an engine like this until then love seeing others build stuff
@upnorteeh
@upnorteeh Рік тому
Thank you for making this video, it definitely hit the spot. Keep up the amazing work!
@williamsiniovosa4945
@williamsiniovosa4945 4 місяці тому
This was so soothing, locked everyone out to enjoy this build i cherished every second, and the music was spot on. I wished it never ended.
@dirtperson4221slash2
@dirtperson4221slash2 Рік тому
Have to comment twice after watching in full.. That ol Mundo hex spin down to the last nuts and bolts represents so many years of wrenching to reach this milestone. I'm proud for you never giving up on your passions my amigo. Always looking forward to seeing what you can build! Thank you for continuing to be an inspiration and role model to us all!
@mmjohns2705
@mmjohns2705 Рік тому
I wish i could press like more than once for content like this! 🎉🥓
@dylanthomas9777
@dylanthomas9777 Рік тому
This was a beautiful video, from the detail of assembly to the, the camera angles, and the editing. Also an awesome educational video.
@A_Gray
@A_Gray Рік тому
Ive always enjoyed the videos where its just chill vibs and shows you whats up instead of telling you, while showing you. I hope you do similar style edits for any wrenching videos. Much love as always 🧡
@joeldesmit
@joeldesmit Рік тому
Greg is the only dad I trust to go out for a carton of milk and come back❤️
@igorbarbarossa
@igorbarbarossa Рік тому
Without milk, but in a Miata
@fatninja987
@fatninja987 Рік тому
I’m here dad
@TheMapleDaily
@TheMapleDaily Рік тому
This plus your previous videos is a perfect tutorial for an engine build!
@BradAF
@BradAF Рік тому
Inspirational!! I’ve got a BP4W waiting for a rebuild, I’ll be watching this video on loop 🙏
@Epiphonech
@Epiphonech Рік тому
Thanks for motivation and guidance for our builds!
@aristotleallen5577
@aristotleallen5577 Рік тому
Total ASMR, those torque wrench clicks made me all tingly.
@yatajoris2857
@yatajoris2857 Рік тому
Love the vibe, great build and thanks for taking us along for the journey. This thing is gonna be sick as always😍
@boostjunky8171
@boostjunky8171 Рік тому
Excellent video Greg, so interesting and relaxing at the same time. Appreciate the effort buddy 👍🏼
@pappieee9409
@pappieee9409 Рік тому
I bought a 05 nb the other day and I found your channel literally about a hour ago, you are a absolute god send and a gem, thank you daddy Greg and much love from the uk 🫶🏻
@ArthurSperotto
@ArthurSperotto Рік тому
This was beyond awesome to watch! Excited to see the trans and diff solutions to put this power to the ground.
@danielplumley2649
@danielplumley2649 Рік тому
What a beautiful piece of art. Can’t wait to hear it run again!
@raphaelsanchez4797
@raphaelsanchez4797 Рік тому
Great music choice and sharp videography. Very satisfying to watch. Love the one-handed Allen wrench tightening. Thanks.
@restoreandrepair-vn
@restoreandrepair-vn Рік тому
Another masterpiece! Such a pleasure to watch! Thank you 💕
@loganritt3805
@loganritt3805 9 місяців тому
was so happy to watch this after unwinding from a long day, love to see it
@94flow93
@94flow93 Рік тому
Greg thank you for showing me that RTV can that is a life changer omg
@elwindewitte
@elwindewitte Рік тому
That was so satisfying! Amazing to watch Greg!
@mazboengineer
@mazboengineer Рік тому
Wow! That engine ❤ sweet work bro 👏🏼👌🏼🤩 ..beautifully edited too, nice job.
@JeremyHeinks
@JeremyHeinks Рік тому
Absolutely beautiful work.
@sparkie5571
@sparkie5571 Рік тому
well shot and well mastered. looks amazing, and I can’t wait to see it in action
@iainbagnall4825
@iainbagnall4825 Рік тому
Dear god this is relaxing. I never knew I needed a 30 minute engine build video. Kudos for doing this with bare hands instead of gloves! That is one clean engine but still. It actually looks like you got a mani before shooting this lol. Which is the ultimate way to show your miata love.
@rafihussain
@rafihussain 8 місяців тому
Incredible quality parts. 🏎
@curlywurly1987
@curlywurly1987 Рік тому
simply beautiful, had my MX5 going on 8 years now, so far turbo'ed brakes, suspension and other little bits. been looking to rebuild and forged the engine to get to a magic 350BHP and to do it myself a cherry poppin moment and this video makes me want to do it.
@peteypeedi973
@peteypeedi973 Рік тому
This has been soothing and brought me peace. Fine craftsmanship and assembly. Bravo my guy Bravo 😎👏🏾👏🏾👏🏾👏🏾
@tech-mike321
@tech-mike321 6 місяців тому
Exactly what I needed to see as motivational goals for my garage find Miata project! 😊
@brookesenfrance3852
@brookesenfrance3852 8 місяців тому
Fabulous way to spend a half hour.❤😎 great music, no noise or talking, just assembly❤😎
@thomassylvestro9041
@thomassylvestro9041 6 місяців тому
One of the best videos, I have ever seen. Could not stop watching... Amazing...
@calinponea
@calinponea Рік тому
This is just beautiful.. Wonderful work!
@paulkimble4548
@paulkimble4548 Рік тому
That short focus length on the piston tops while cycling 😮‍💨😮‍💨😮‍💨
@ericwietzke9158
@ericwietzke9158 Рік тому
This is so good! Props Greg for all ya do for us :)
@Friendsofdonr
@Friendsofdonr Рік тому
Driven Racing has been amazing in my engine and the br30 worked so well, engine was broke in extremely quickly and efficiently. I was pulling 27inhg within 45 miles, following the Flying Miata break-in procedure. Glad to finally get time to watch this Creighg!
@JamesChurchill3
@JamesChurchill3 Рік тому
Gaskets & chill with Ol' Gregg on Valentine's Day? You spoil us.
@violinmiata
@violinmiata Рік тому
That was beautiful! Stunning engine.
@Patrick94GSR
@Patrick94GSR Рік тому
hell yeah such perfect timing on this. My 2000 BP4W is blown apart down to the long block on the engine stand right now, for resealing and cleaning everything. I'm not removing the head or doing anything internal, but replacing all external seals, gaskets, o-rings, all new coolant hoses, oil pan sealing, etc. Just ordered all my parts yesterday. Can't wait to get it all back together and driving again.
@JustMe-pq7je
@JustMe-pq7je Рік тому
It's amazing so many moving parts needing to work under so much stress. More power, though, versus longevity.
@tylermfdurden
@tylermfdurden Рік тому
Planning on putting my head back together this weekend, so this was a treat
@handleymachine4421
@handleymachine4421 Рік тому
This was an extremely satisfying video. And money shot at the end! Magnificent!!! Such a purdy motor.
@raventai
@raventai Рік тому
Really Zen video to watch, no chat, just letting the parts and the process tell the story. Well done sir. you earned a like & subscribe from an ND owner.
@harleydaun3847
@harleydaun3847 Рік тому
I have been waiting oh so long for this to drop thanks miata pops
@cavalierliberty6838
@cavalierliberty6838 10 місяців тому
I have seen plenty of people assemble engines, you have it down to an artform. I want to be on your level one day, man.
@gabemarshall7777
@gabemarshall7777 Рік тому
Simply beautiful and amazing!!! Work of art for sure! 🙂
@abkarianofs
@abkarianofs 3 місяці тому
Simply nice and efficient work 🔥
@JonnyJonDogg
@JonnyJonDogg Рік тому
Greg thankyou so much for this video! I am about to build a new engine for my mk1 and you have no idea how useful this video is to me :)
@Nasonix2
@Nasonix2 Рік тому
So happy to get to see it happen. Couldnt of hoped for more. For those of us who have built engines before, it's time investing! Let alone video recording and editing such a slick assembly compilation. This is awesome you could probably do so much with this engine. I'm a little concerned with the crank being able to handle high boost though. In theory it should but who knows. That's the thing I don't know of anyone else that has run the level you might intend on it. Is there anyone else running upper 400's whp on them? If not I'm worried that it might be intended for natural aspirated builds (all out n/a builds) hense the cast material. Don't get me wrong cast cranks can still make 400+whp. But my thinking is it shares the same counter weight design as the forged cranks and we know that it's not favorable for high RPM's. All I *know* for sure is the M-motorsports crank is cast however the metal alloys used is supposed to be better than the OEM Miata one. The better design at the nose of the crank (will help mains). In theory I think it should be good for what you made before but I just don't know for sure I'm just worried since nobody else has committed their build to the unknown like you'd be doing. It's awesome 👍
@PinChE_LoCo
@PinChE_LoCo 9 місяців тому
Classiest mechanic content 👌🏼 I've ever seen.
@ryanchampney2637
@ryanchampney2637 6 місяців тому
I wish I had the knowledge to be able to do this. I know next to nothing about engines. But this is so fascinating. Thank you for posting
@michaelalden5119
@michaelalden5119 6 місяців тому
That was a work of art
@nicpro85
@nicpro85 2 місяці тому
delightful to watch. I've learned so much, thank you.
@tylersaupe1612
@tylersaupe1612 4 місяці тому
Beautiful, well done sir! Great skill and production. Fire this bad boy up!
@kg_canuck
@kg_canuck Рік тому
God, you make building an engine seem really easy. Thoroughly enjoyable to watch
@mioszgora5443
@mioszgora5443 Рік тому
Awesome job🔥🔥
@CarUtopia982
@CarUtopia982 11 місяців тому
An absolute work of art!
@Az-dq1gm
@Az-dq1gm Рік тому
Beautiful video and engine. Can't wait to see it in action
+700HP SR20DET Engine Build - Full Start to Finish [4K]
33:43
throtl
Переглядів 200 тис.
OEM+ Rebuild of a 37-Year-Old V12 Engine - BMW E31 850i - Project Marseille: Part 8
1:18:57
In 10 Minutes This Room Will Explode!
10:00
MrBeast
Переглядів 39 млн
🐩🐕
00:25
Янчик
Переглядів 1,8 млн
Building a 3.5L 2JZ with Dart's NEW Cast Block! 2000hp Build
20:55
REALSTREETPERFORMANCE
Переглядів 103 тис.
The ULTIMATE GUIDE To Deciding if Rotrex Is Right For You.
31:43
TheCarPassionChannel
Переглядів 65 тис.
1969 Yamaha DT-1 Rebuild, ASMR Special | The Shop Manual
36:35
RevZilla
Переглядів 698 тис.
90-93 Mazda Miata Mx5 1.6L B6-DOHC 192K Mile Complete Engine Teardown
24:15
440 Mopar V-8 Engine Build | Redline Update
42:31
Hagerty
Переглядів 939 тис.
$25,000 Turbo Miata Build in 10 Minutes
12:07
Donut
Переглядів 1,5 млн
Which Miata Engine is Actually Best?!
28:03
Napp Motorsports
Переглядів 20 тис.
REBUILDING A BLOWN BMW E46 M3 ENGINE (ASMR)
38:57
Performance Rebuilds
Переглядів 1,7 млн
Rebuilding an Abandoned 1.8t Audi TT ~ Buying Unfinished Project Cars
40:07
HumbleMechanic
Переглядів 270 тис.
Минск - лучший мотоцикл СССР !
0:41
Ретро Мото 58
Переглядів 606 тис.
Не стоит парковаться у гидранта
0:29
Хорошие Новости
Переглядів 6 млн
Figurar curvas punta hoja muelle #tainco
0:59
TAINCO [ TALLER INDUSTRIAL COLOMBIANO ]
Переглядів 6 млн
Машина застряла в текстурах!😱 (🎥: @Carmagheddon)
0:26
Взрывная История
Переглядів 1,6 млн
ЧЬЯ МАШИНА ЛУЧШЕ?? #shorts
0:23
Паша Осадчий
Переглядів 1,2 млн
Не вывез
0:33
Alien fun
Переглядів 2 млн