Car ramps - how to make it - DIY
Переглядів 737,548
6 років томуIf I use other car, ramps lifting up more easily, because BMW has weight distribution 50/50 %
New video Caribbean trip: • Caribbean 2018 - Carni...
Illegal Night 2017: • Illegal Night 2017 - K...
My new case mod: • RYZEN SPACE - 3000 € -...
New video! - Subaru Impreza WRX sound • SUBARU Impreza WRX VS ...
Car ramps - car lifter
Material:
steel profile L: 10 pieces (6m), 50 x 50 x 5 mm
steel roxor: 110 pieces 40 cm long
steel tube: 2 meters
bolts and nuts: 4 x 40 x 10 mm + nuts
FB fan page: / pcnadsenci
WEB: pcnadsenci.eu/
My other videos:
GPU vs GPU
RX 480 vs R9 290 • ASUS R9 290 DC2O vs RO...
GTX 1060 vs GTX 960 • ASUS Strix GTX 960 vs ...
GPUs:
Asus Radeon R9 280X DirectCU II TOP 3GB (unboxing):
• Asus Radeon R9 280X Di...
GIGABYTE R7 260X OC WINDFORCE (unboxing):
• GIGABYTE R7 260X OC WI...
ASUS Strix GTX 970 (unboxing):
• ASUS Strix GTX 970 (un...
MSI GTX 970 GAMING 4G (unboxing + benchmarks + GTA V) [SK/CZ]:
• MSI GTX 970 GAMING 4G ...
MSI GTX 980 GAMING 4G (unboxing, benchmarks, GTA V [SK/CZ]:
• MSI GTX 980 GAMING 4G ...
ASUS STRIX GTX 980 TI (unboxing, benchmarks, GTA V test) [SK/CZ]:
• ASUS STRIX GTX 980 TI ...
TEST NVIDIA GTX 9xx GPUs - MSI [SK/CZ/EN]:
• TEST NVIDIA GTX 9xx GP...
ASUS STRIX GTX960 2GB OC vs TURBO GTX960 2GB OC [EN]:
• ASUS STRIX GTX960 2GB ...
Mouses:
ASUS ROG GX 860 BUZZARD - gaming mouse (unboxing & review) [SK/CZ]:
• ASUS ROG GX 860 BUZZAR...
MSI INTERCEPTOR DS 100 gaming mouse [SK/CZ]:
• MSI INTERCEPTOR DS 100...
CONNECT IT Battle Mouse V2 (unboxing):
• CONNECT IT Battle Mous...
MSI INTERCEPTOR DS200 GAMING MOUSE:
• MSI INTERCEPTOR DS200 ...
CASEs:
Zalman R1 (unboxing + review):
• Zalman R1 (unboxing + ...
Zalman Z1 (unboxing):
• Zalman Z1 (unboxing)
NZXT S340 - BLACK + RED (unboxing):
• NZXT S340 - BLACK + RE...
Motherboards:
GIGABYTE Z97X-Gaming 5 (unboxing):
• GIGABYTE Z97X-Gaming 5...
GIGABYTE H81 D3H (unboxing):
• GIGABYTE H81 D3H (unb...
GIGABYTE 970A-UD3P (unboxing):
• GIGABYTE 970A-UD3P (un...
ASUS RAMPAGE IV EXTREME Battlefield 3 Edition (unboxing):
• ASUS RAMPAGE IV EXTREM...
MSI Z170 GAMING PRO AC (unboxing + review) [SK/CZ]:
• MSI Z170 GAMING PRO AC...
ASUS SABERTOOTH Z97 MARK S (unboxing) [SK/CZ]:
• ASUS SABERTOOTH Z97 MA...
MSI Z170A XPOWER GAMING TITANIUM EDITION (unboxing) [SK/CZ]:
• ASUS ROG MAGICAL MUG
ASUS H170 PRO GAMING [SK/CZ]:
• ASUS H170 PRO GAMING [...
PC Builds:
Gaming PC build with Z97, i5 - 4690K (July 2014):
• Gaming PC build with Z...
Bench table - Test station:
• Bench table - Test sta...
How to build Cheap PC ( with Intel Haswell Refresh - 250€):
• How to build Cheap PC ...
Gaming PC, socket 2011 (rebuild) ( november 2014):
• Gaming PC, socket 2011...
Gaming PC Build, FX-6300, R7 260X + benchmark (december 2014):
• Gaming PC Build, FX-63...
MSI RED DRAGON - Richard Sláma (G3258, Z97, GTX 970):
• MSI RED DRAGON - Richa...
Actions:
IT EXPO Košice 2015:
• IT EXPO Košice 2015
ASUS SCHOOL - OVERCLOCKING with water - ASUS POSEIDON GTX 980 TI Platinum i5-6600K:
• ASUS SCHOOL - OVERCLO...
SOŠT OC SHOW 2015:
• SOŠT OC SHOW 2015
ASUS ROG action with MATRIX GTX 980 TI Platinum [SK/CZ]:
• ASUS ROG action with M...
IT EXPO KOSICE 2016 - MSI:
• IT EXPO KOSICE 2016 - MSI
IT EXPO Košice 2016:
• IT EXPO Košice 2016
ASUS AKCIA APRÍL 2016:
• ASUS AKCIA APRÍL 2016
@danburch9989 5 років тому
Easy fix. Add another 3ft/1m to the front of the ramp to allow you to drive a little further onto the ramp. That will move the center of gravity beyond the tipping point and you won't have to jack up the rear end. Then add safety kickstand at the rear to keep it from tipping backwards.
@mrbratt69 6 років тому
It's truly amazing how many negative comments there are for this idea. This is a good idea, no one was hurt, no property damage happened either so how is this not a solid tool? There was no weird flexing or twisting of the metal in any way. Soooooooo, people are bitching and moaning because the ramps didn't work like they were intended? How do you find out if your idea is going to work if you don't try? He gives a legitimate reason as to why these ramps didn't work as predicted. His reasoning makes a lot of sense as well. I agree, there isn't enough structural bracing to make comfortable to stay underneath the car on these ramps. I imagine quite a few people were hesitant about using the hydraulic car lifts that are in every automotive shops today. If I had a concrete driveway or pad when I was building custom rides I would have built something like this myself to help me work. HELL, after watching this video I may build one now to make it easier for me to work on the under carriage of my lifted Jeep, It has enough of a lift to make some things out of reach from under my Jeep but when jacked up and supported by Jack stands it's too high for me to be able to work from the top of the engine compartment. I could build a ledge that goes around the sides and front of the Jeep that could support my wheelchair and allow me to work from either the top or bottom. Great idea and definitely a great platform to upgrade or build from. Don't let these idiots make you think it's a stupid idea.
@rustyfox2794 6 років тому
Good build, but if you'd made the fulcrum a little further back, the stand would have tilted just by driving the car onto it. That would save you having to lift the back of the car manually, but I like the overall design. I'll copy it pretty much!
@steveedwards4495 3 роки тому
These ramps are a good idea when built well. As said, needs more bracing and made longer. If the pivot point is dead centre you should be able to stand on the front to rock it down the slide your blocks to hold up the rear.
@ernienapier70 5 років тому
That sure is a very interesting idea. I've made a couple of small ramps with my everlast welder but nothing like this where it gets the entire car off the ground.
@peteculf8526 4 роки тому
what did the paint on your car bonnet look like after all those sparks from your grinder? not to mention your windscreen.
@specialized29er86 6 років тому
A great easy to weld up car ramp, we built the same using this clip as a guide.
@hyperion8008 6 років тому
The lack of bracing makes these really dangerous to use! - get some triangles in there!
@mikebalch1799 5 років тому
It should actually look like a "spider web" to help disperse the weight evenly across the structure
@bhammon9172 6 років тому
That reminds me of a football bat! The forward legs can buckle underneath with the slightest force. And I dang sure wouldn't be under it while jacking the car up. To each their own, I guess. No disrespect intended. 👍
@thommytwotoestimesthree847 6 років тому
Definitely need the diagonal braces for this gauge material. I have the platforms but they are quite a bit heavier ...over 300 lbs. each. This is not a bad build but max would be 4200 lbs. or so.
@stephendenn 5 років тому
I'd add a few diagonal braces across your center support beams so it can't fold over sideways
@Babayaga-pf5dt 2 роки тому
Are they working on the side of the road so the ambulance can find them quicker?
@markstevansen542 5 років тому
Cool. This is something I can make myself with my powerarc welder and some time and effort. Great idea.
@SeriousSchitt 5 років тому
Mark Stevansen: How are you getting on with your build?
@donnarichardstevens3163 4 роки тому
Ingenious and lethal at the same time
@janreclo4902 6 років тому
Na 100%.. pozdrav z PD:)
@gareth2250 6 років тому
Amazing. Really good idea. Good design prototype
@vandorocha4509 5 років тому
Achei muito interessante! Vou fazer uma dessas pra mim! I liked a Lot!l'm from Brasil, I Will Do It for me to!
@td5squad49 5 років тому
Top job boys I want to make some for me would they hold up to a landrover discovery
@istvantiborolah7030 5 років тому
Szuper! Ügyesek vagytok!
@romansten9 6 років тому
rebar is so easy to bend by hand. I think I'd use angle iron cross pieces under a strong mesh deck or something.
@StopTeoriomSpiskowym 4 роки тому
Problem a center part is in center of wheelbase car. When car was 50/50 distribution it work because car is on front. Ramp must be a little longer over a center of ramp point
@PrettyOverground 2 роки тому
Помню, у венгерских ребят давным-давно такую рампу видел... )) И они лихо заезжали на неё на своём ситроене. Дело не в развесовке машины. Дело в том, где центр тяжести относительно оси рампы. Интересно, какая длинна рампы получилась? И из каких материалов делали?
@mervynmullan6756 6 років тому
Looks a good job that 🙈😂
@jamiebennett975 5 років тому
could u tell the me music wat was played thanks
@heyxilong 6 років тому
That was painful to watch.....if you would have turn the ramps around and started from the other end you would have just drove to the tilt point and it would have leveled off.
@jorgematos4553 2 роки тому
Vcs são de que paises
@irmissvarbuolis8610 4 роки тому
it is around 40+ degrees angle, I would consider not more than 30 degrees, otherwise winch is recomended
@beedee9534 6 років тому
Can you get strong metal for 2 cents a pound
@jackarmando 6 років тому
U finally can change that bolt now ! :)
@MartinsTips 6 років тому
I changed the clutch, engine suspension and others :P
@jackarmando 6 років тому
Good that u have this setup than! keep up the good work
@MartinsTips 6 років тому
Thanks! :)
@melvinsumter8609 Рік тому
do you sell the plans
@jamescooper8969 6 років тому
not sure how practical this is, would consume an awful amount of time to set up for the smaller jobs, i,e about an hour to get it up there and all secure for an oil change which takes 10mins, also the car would have to be running and drive-able to use this ramp, no way you can push it up this!
@user-uo5gz9um1r 3 роки тому
สุดยอดคับดีมากลองทำตามใด้ผลคับ
@SOUTHWEST778 3 роки тому
Nice working height, if you hate your back
@cableup1 6 років тому
That's a fail on so many levels. Too bad too, because all the elements are there and it's a nice working height. Not useless. Just tweak it.
@DAS-Videos 5 років тому
That man was brave being under the car while jacking. The ramp looks barely strong enough.
@tcseacliff6384 4 роки тому
no gussets on the front piece that hodls the car up?? none anywhere!!
@billoy1979 6 років тому
would it have been easier if they used a pre-cut chekered plate?
@MartinsTips 6 років тому
Yes, but, it will be too heavy
@jiwbink Рік тому
EVEN WITH THE LITTLE ISSUE,THIS IS PROBABLY ONE OF THE BETTER HOMEMADE RAMP (SYSTEMS) I'VE SEEN IN THE TUBE. MOST SEDM TO BE 14 TO 20" HIGH, JUST HIGH ENOUGH TO BE TOO CLOSE IF YOU CAN GET UNDER THERE IN A ROLLING STILL AND TOO HIGH IF YOU'RE ON A CREEPES. IF YOU'RE GKNNA BE USING THIS YOU BETTER HAVE A TRAILER AND A FRIEND OF THREE,LOL! HAS ITS NOT QUITE THAT BAD. MAYBE CONSIDER CUTTING KIT INTO SECTIONS,USING ANGLE FRAME WORK AND BOOTING THE M TOGETHER. EITHER WAY,BUT THUMBS UP!! JUST MY 2¢ WORTH BEST OF LUCK!! TOO MANY OF THESE "BUILDS" ARE SKETCHY AS FRIGGGGG!!
@richardcastle790 6 років тому
Классно💪
@larsissism 2 роки тому
Who is the electro intro music?
@user-ei5zn3rl3i 5 років тому
У шведов удобнее. С этой много телодвижений
@iamlegend712 4 роки тому
Song???
@jwserge 2 роки тому
Best idea - an inspection pit in your garage! !
@kingtut5923 3 роки тому
I reallyenough dont think that the angle iron is strong
@neftalirosado6167 5 років тому
Dangerous job !!!
@airplanegeorge 3 роки тому
I like the part where he is sitting under the whole mess with a bottle jack.
@Phen0mable 6 років тому
Too low to stand up underneath the car. Too high to lay down. Can't remove the wheels. Not sure about this project
@nicholasrudloff 5 років тому
I would rather lay on my back to be honest. Weird height to work at
@xXShadowRejectsXx 5 років тому
rolling stool. that's how alignments have been done at most above-ground alignment racks for years
@chris-oy9jn 4 роки тому
Good idea and good video. Shame about the music
@ya472 6 років тому
Too much afterthought in this plan. OMG I hope their welds are better than their design skills.
@MartinsTips 6 років тому
We need use this design, because we will use this ramps for other things after repair ...
@malthevoice9614 6 років тому
True but it looks like a lot of work
4 роки тому
As much as steel cost these days, and to gamble on if these would work, would keep me away.
@elorahoskins6960 Рік тому
What is this ramp called
@mike59317 3 місяці тому
The ramp of death.😁
@orutram4749 2 роки тому
that´s something I personally wouldn´t trust my life to
@nda246 3 роки тому
dude under the car without stands under it using a jack on top of 6 2x4s. hes probably dead now but im surprised he lived through that.
@user-nft2nmfghn 4 місяці тому
Трап для смертника! Парни вообще не знают делать икс образные косынки. Мягко говоря эстокада для смертника
@claudexy 4 роки тому
good use of your imagination...BUT WOW... that design is VERY DANGEROUS. at least put some stoppers to keep you from going over the ramp.
@dinohudson1432 6 років тому
Like wrapping a 30¢ Bologna sandwich in $25 worth of aluminum foil.
@erichill5208 4 роки тому
Flawed design no x bracing to prevent collapse. Wrong dimensions. It should self tilt as the vehicle drives onto the unit.
@barsixful 2 роки тому
I’m not putting my old dodge Phoenix on that thing…
@ggj666 Рік тому
I was going to build a set but could not find any Pinky and Perky music to play while making it
@jameswebster12 4 роки тому
147k
@user-rw7su7ph1m Рік тому
И что эта конструкция на 89/ проц. Уже стационар добавь два три лонжерона А где идея у меня есть. Такая
@anm0604 5 років тому
there is better simpler way, build a longer, that's it.
@t-money760 5 років тому
That’s a no for me dowg
@arseniliverpool 6 років тому
Blody hell mate you need a full day to lift your car what about fixing it
@MartinsTips 6 років тому
Clutch, engine suspentions and others
@josedejesus3117 6 років тому
LOL 😹
@maximilianjankowski 6 років тому
@jack goblar i have never seen such an dumb comment its nearly amazing , did the guys show here an car repair or an build of a ramp ?
@kurac356 6 років тому
😂😂👌👌
@roadiemort3589 3 роки тому
Good Idea 100% Execution 100% Fail.
@fluffypuppy720 3 роки тому
Now you can change the oil
@MartinsTips 3 роки тому
That time i changed clutch and dual mass flywheel :)
@malthevoice9614 6 років тому
Buy a lift a lot easier
@maximilianjankowski 6 років тому
Malachy Fegan oook how much does the Cheapet lift cost that you can find ? ~1500€ the lift need a garage because of the elektroniks and it need atleast 25thick beton for stability .... this lift does not need anything of it and its much cheaper , i have seen much worse construktions
@brayanmiranda9707 6 років тому
Hay un canal llamado AGENTE 007 es de vídeos juego y de risa
@pojdiavaj1422 6 років тому
Too insane for a lube maintenance
@trucksguns6898 Рік тому
just throw them in the garden shed when the job is finished
@tomball2619 4 роки тому
You really have the dog under there whiel you were first testing them that's not the brightest move
@MrSus4estvo 4 роки тому
Неудачники. Не смогли с расчётами. Я не утверждаю что я бы смог. Но я и не сварщик)))
@zhr4121 5 років тому
Entrance angle....
@mjamczech8308 6 років тому
Přesně takhle ne!!!!! Pod to by nevylezu, a už určitě bych na to nevjel.
@MartinsTips 6 років тому
martin maj haha, preco takto nie ? 😂
@peteryeung111 4 роки тому
Don't do this at home folks. Trained professionals doing these highly dangerous stunts.
@JAMAICABOYY. 3 роки тому
This is definitely too much work and it's not safe
@fm00078 4 роки тому
Allow JUST ONE vertical member to begin twisting... Where's the Cross Brace to tie the 2 ramps together to keep it from flopping sideways?!!! 3 LARGE triangles, good. 2 more on the tall center legs, BETTER. IF you don't understand this, go look at auto dealers who use tall ramps. ___ RELOOKED... Random angle iron 'Leg' directions?!!! 😨 Too many cooks in the kitchen.
@Texaca 3 роки тому
8:12 ....having to resort to using a bottle jack or a floor jack underneath the vehicle, to lift the ramps with a 4x4 post, kinda defeats the purpose of building the ramps in the first place 😄 ....poor design, good build, just not well executed. imo. It probably would work ok for front wheel drive vehicles, like a Buick Rendezvous or a CUV, it's very front heavy for a 5,365 lb vehicle 🤔
@stevenbiars6212 6 років тому
Kind of a soup sandwich.
@dalemr2 6 років тому
Car ramps - how NOT to make...
@gualbertotellado1455 6 років тому
Que mal diagramado un conglomerado de hierro.
@woollywoolwoolz 2 роки тому
Sketchy AF
@ghost6500 3 роки тому
amateurs... apparently there was no plan or sketch to go by. A little of physics 101 would help.
@genesssisss 4 роки тому
Am I the only one thinking someone is gonna die using that shit? It looks extremely weak and poor designed but if it works for them...
@REVIEW_JUJUR 4 роки тому
Just waiting shit to be happen...
@skifseveraskifsevera3114 3 роки тому
Легче подъёмник купить
@bbhoustontx 3 роки тому
balls of brass ....... all I got to say!
@matthewjenkins1161 6 років тому
That poor little dog. More by luck than judgement that it didn't meet a messy end!
@MartinsTips 6 років тому
Don't worry about dog! He is big worker :P
@thinkfirst6431 6 років тому
Not much work if he catches too many flashes from the arc. Wanting to play ball under the test loading of the ramps not great. Good luck to the dog.
@hugoalberto2010 5 років тому
Plop!
@palhorvath3928 4 роки тому
Hungarian version is so easier
@dannylee0807 Рік тому
These are clearly non genuine (to steep) and have no weight certification. Even damaging the cars spoiler and rear.
@tomasztomasz2985 6 років тому
Sąsiedzi
@coggsy3036 4 роки тому
Why not turn it around and drive it down hill so it tips it’s self up. 😂😂😂
@kamele.belkacem4514 2 роки тому
Very dangerous, unsafe, difficult to manoever, risk of front fall, wheels not free for wheels work, ... Just buy a car lift.
@africanhistory 4 роки тому
Albanians?
@lockeM140 Рік тому
All that to change the oil LOL
@MartinsTips Рік тому
No I changed clutch
@DaProGaMeR1 6 років тому
I hope this wasn't made to just change the god damn oil.
@MartinsTips 6 років тому
hah no :D I changed clutch and engine suspension
@Janpva. 3 роки тому
fail.. but so close
@alialeissa 5 років тому
Nope, I am not sneakin under des weak ass ramps.
Суспільне Харків
Переглядів 267 тис.
Meca24
Переглядів 825 тис.
Той Руби
Переглядів 1,2 млн
Супермама
Переглядів 455 тис.
РАСПАКОВКИ | ИДЕИ | БЮДЖЕТНЫЙ ШОППИНГ
Переглядів 3,5 млн
Tata.harmonyway
Переглядів 2,2 млн
Tips Workshop
Переглядів 31 млн