I emailed this guy three times with questions and three times he answered. This is almost unheard of on a youtube video. This guy has my support. Great video with plans and a great guy.

Those are the coolest ramps I've seen. So simple but effective. If I were to build them I think the only thing different I would do would be put cross-bracing in them from top to bottom at a 45°. Great work man.

I think you did a great job on this. Thanks for sharing your plans.

Great idea well executed. Rather that lying under a vehicle that's not far from your face, with these ramps you have far more space, almost like having a pit. Great work !

Oh man I would love this. I have a car that I need to remove frame rust and replace the body mounts. This will make the job 1000% easier.

I'd like to see a cross tube added front and back through which another tube could be slid right across to link the two units together. You could drill the cross tubes for pins with holes in the links every two inches. You'd still have full track adjustability, but the cross tubes would reduce sideways racking and prevent a parallelogram collapse.

Thanks for sharing. This will be life changing. I'll share thoughts and experiences when built and used

Remember seeing this video years ago, and it pops back up on my recommended. Regards from Moray🏴󠁧󠁢󠁳󠁣󠁴󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿

A real nice job David. Keep on making more stuff for us to see too. Peace

Your ramps are brilliant me and my son love this stuff we love doing our motors and your ramps or should I say exact same ramps as yours is just what we need. We love em.

Personally, I'd probably drill several holes on either side and attach a large cross member that you could put some heavy duty pins through to help prevent lateral movement.

Great job 👍. I would add more triangulation in the weight bearing areas.

Excellent. I need to do a few jobs on my Landy and was thinking of building an inspection pit but then saw this. It´s probably cheaper to make and easier to take with me if I move than the pit! Thanks a lot mate. Subbed

Excellent work. It's great that they're separate too not only are they adjustable to any vehicle they can be lost down the side of the garage when not in use. Might get round to making some myself. I've liked and subscribed too

I would have loved a pair of these not so many years ago. Nothing worse than crawling under a vehicle with zero headroom. Thanks for sharing.

Great build and presentation.

Very very nice design and functional and use. I need to make these !! Thank you for sharing. You mentioned that the plans are available. oops ..I just found your plans in a subsequent post. thanks much David !!

This is insane. Exactly what I was looking for! I’m hoping to get a welder soon and binge several hours of videos and teach myself.

Great video mate ! Even greater name ! Long live the clan .... from Australia 🇦🇺 all the wae back tae Scotland 🏴󠁧󠁢󠁳󠁣󠁴󠁿

LOOKS LIKE IT CAN HOLD ANYTHING...LOT OF ANGLE IRON!!.. GOOD JOB!

Great Ramps Brother, I hit those buttons for ya as a thank you for posting the vid and making your plans freely available. I see from the comments you actually respond to people who message you also so good for you Brother. Off to get some steel together now cause just like u I'm sick of clawing around on the wet ground outside my home here and at 55, it ain't getting any easier....until now 👍 Thanks and God Bless 🙏

Best lift for home , nice work men

David, for me, just a brilliant idea, going by your kit and the amount of spare angle iron and rebar, YOU CAN WELD, and if it can hold a fully loaded van then brilliant, just need something to support a family car, I’m not building the Titanic, thanks for sharing 👍😃 subbed

Just the ticket. I mangled two mouldy ramps I made out of a manky old car transporter driving my diesel Alfa up on it and I've been eyeballing my scrap pile looking to make simple ramps it won't crush. You've confirmed what my gut feeling the 50x50x3 angle I have is both insufficient in length and thickness. 50x50x5 sounds far better, and it won't be all rusty. Subscribed, loving the delivery, and just enough detail to figure out the bits I need to copy.

Fabulous, one of the best inventions I've seen yet :)

Great idea. I might modify this to fit my riding mower for cleaning and servicing. Thanks.

You're a talented genius, very elegant design and functionality. Thanks for uploading. Subscribed.

Not bad you say??? Bloody Marvellous I would say, well done! I'm deeply impressed I look forward to seeing more of your videos

This has to be one of the coolest ideas I’ve ever seen

Outstanding set of ramps there fella 👌👍

i used your plans for the ramp ... best thing i done in my life .. good work mate cheers.

Great job 👍🏻

You are a legend. I live in Fiji and the knowledge you have shared and its much appreciated. If you could come up with a simple design of a jack and jack stand in one would be grate. Keep it up and you have gotten yourself a subscriber. GB

Great Stuff. and great video. I will increase the length of the extensions and lessen the angle of the incline to allow for low clearance vehicles

excelente trabajo!!! muy buena idea!!!. saludos desde Mexico.

Excellent video. Terrific ramps.

Car showroom use something very similar. Personally I'd add a few cross-members too for strength and safety and you could modify the jacking bar and add another thinner one further along, to ensure the correct distance is "locked in" between them and so that they don't separate ;)

Awesome idea can't believe I never thought to make these .needs way more work but good idea

Bloody good job now that I’ve seen them the only change I would make is possibly make the base 25% wider than the top I wonder how that would go........

Nice! Thanks for posting!

Looks like a decent idea though I would throw some lateral strength at key points across length and width box sections👍🏼

great job! pretty simple yet genius

absolutely AMAZING wish I had these it would really make life easier

Superb, congratulations 👏 in the future I think I will make my own ramps like yours.

I’m impressed. Very impressed.

В этой конструкции замечательно абсолютно всё. Сложится она в бок это 100%, вопрос времени. Не хватает диагональных связей по узкой стороне трапа.

Thanks for the video. Excellent job. Subbed.

Useful! Great job mate!

For sharing with all of us, cheers m8.

Great job and very handy, You could even rent them out when not in use (with a signed disclaimer form).

Good idea but I'ld prefer square steel stock for the framing and cross supports anywhere/everywhere to prevent tortional twisting; all it takes is a one time oops event and you are dead, or mamed for life. Each ramp needs to be locked into the other so no twisting or shifting occurs.

Nice, looks like it works good and not a very high cost.

The only improvement I’d make is to add a triangulation diagonal between some of the verticals to brace it - it might not need it but I’d worry about the domino effect. Edit, should have read the other comments! 😃

This is pretty cool!

Excellent job. Do you find the working height comfortable when you're underneath ? Thanks for your video.

You're attitude is as awesome as this job. No electricity no nothing. I fucking love it. The leveler is brilliant too. The only addition would be to drop the wheels. So you could maybe install bottle jacks.. with integrated jack stands, insert blocks, pull the pins then release the pressure let them fall and you've got a full service available. Awesome.

What an awesome set of ramps, I love the lifting bar..........also to all the guys saying it needs cross members and strengthening.......it's holding a van........the guy said he had a 3 tonne pick up on it............it's fine as it is. (I need to learn to weld) 😉

Nice done, you got my blessing.

Similar to what I’ve used but the removable ramps were hinged to take the weight at the back to save having to fit the legs.

Cracking set of ramps

Bloody brilliant!

Never thought about ramps but I needed an auto elevator . Cool 👍

Great idea and quality job as well thank a lot brother

Superb sturdy construction. Only observation (NOT a criticism) - I would have to paint the jacking beam black as well - it would bother me 🙄

Very good for space constraints.

Awesome ramps, great video, top man

Excellent ramps ,what did it cost

Bought a set of these off a car dealership 25 yrs ago for 400 bucks, they work great, kind of a low budget car lift.

Brilliant. Enjoyed watching this and subbed.

Nice bit of fabrication mate, good job. Have a look at car tilters, might be a good future project.

looks great! very impressive!

Great job.

Great video and great job.

Thank you for some great ideas, looking to build for my nephew in philippines who is starting his own mechanical business, only changes would to be build in two sections and maybe us removeable checker plate for drive on instead of rebar, to make more transportable from job to job

This is a cool project, I would add some diagonals though. Got me subbed!!

Brilliant mate - these look like shop-bought ones! subbed

Wie geil ist das denn, Top und toll zum nachbauen.

Amazing design

Well done! This is what i am looking for...Thank you!

Great build and video, when I was at school in the late 70s I designed something similar to this in my design and technology class but wasn't allowed to build it cos it was such a big build 😡 lol

Thank you for your explanations and your plans. I will realize these systems but with a modification. I will integrate a winch in case the vehicle breaks down.

How much did this cost u its awesome good job.

Wonderful and Interesting!!

Great project

This one is my winter project, serviced the auto transmission today 7 hours of laying down as well as up and down under a the car. oh my back. Love the hoist good work quick and easy and no Japaneasy.

you're sick with it dude. great job

Ottimo lavoro 💪🏻

I have a set of the blue ramps, as seen in the pamphlet with the red XJS on them! No idea who originally made/sold these as I bought them 2nd hand nearly 10 years ago, excellent things though.

A little longer in the front and it will tip itself up. Used to have two of them at a car dealership about 5 foot high and self leveling. Meant to showcase cars more than anything but excellent for exhaust, transmission ect. work. Need one myself, looking for house trailer beams to build.

Wow those are some really long ramps. Im thinking about using my everlast and making something like these but maybe out of aluminum and theyd have to sectional so that I could store them in a smaller space

Impressive work :-)

I'm doing this! Just subscribed thank you

Great job 👍

Those are awesome! I wish I could weld.

Great metal work and very impressive idea. Was that all done with arch welding?

Super nice job.

Tranks for measurements, just finished 3D drawinf for me - gonna build this one in spring.

very impressive ideas

a diy ramp? i blinked and nearly miss this lol you made that hella quick

Genialne :)