Simple wood corner joints / Woodworking joints

  Переглядів 7,891,221

Celal Ünal

Celal Ünal

3 роки тому

Hello friends. In this woodworking work, I have demonstrated some of the simple wood joining techniques. I uploaded the video under the names of simple wood corner joints woodworking joints wood joining techniques. This wood project has been very enjoyable. This is how I used the short boards in my wood workshop. Friends, I really like woodworking. I wish everyone who is interested in wood projects to have a very nice workshop. In this video, I showed butt joint, splined miter joint, dowel miter joint, mock finger joint, finger joint, box joint, mock dovetail, dovetail joint, mitred through dovetail wood joints. In this woodwork, I also showed box joint jig, splined miter joint jig, table saw splined miters, miter splined jig, router table splined sled routers. Wood designs without nails can be made with these wood joining techniques. I hope you will like it. Thank you very much for watching. Stay healthy.
#woodjoints #dovetailjoint #woodworkingjoints

КОМЕНТАРІ: 6 400
@defneunal6831
@defneunal6831 Місяць тому
Merhaba baba ben kızın yaptığın ahşap birleştirmeler çok güzel olmuş benim marangoz babam iyiki benim babam sın seni çok seviyorum ve her zaman seni yüreğimle destekliyorum canım babam ❤❤
@CelalUnal1
@CelalUnal1 Місяць тому
Merhaba guzel kizim çok cok tesekkur ederim. Calismami begendigine cok sevindim. Calismalarimi desteklemen beni ayrica cok mutlu etti. Seni cok sewiyorum guzel kizim kocaman optum.❤️❤️
@Mimarlife
@Mimarlife Місяць тому
Merhaba dostum numaranı gönderirmisin
@abhinavprakash007
@abhinavprakash007 2 роки тому
Nobody in the history of youtube has gotten my subscription so quick. Thank you so much for this!
@CelalUnal1
@CelalUnal1 2 роки тому
Thank you so much.🙌🙌🙌😊
@shirocp
@shirocp 2 роки тому
This is probably the best miter corner methods I’ve seen in a while. My favorite are the splines with “x” pattern. Also, the jig you used with the router to make dove tails is legit. You did those so fast with the jig. All of those alternatives were awesome! Thanks for sharing!!
@CelalUnal1
@CelalUnal1 2 роки тому
Thank you so much. I am so glad you liked it.
@angelaandreaherreralopez8504
@angelaandreaherreralopez8504 Рік тому
Ñ
@JC-77
@JC-77 Рік тому
Definitely the splines with "x" patterns are very cool.
@johnnycorn7225
@johnnycorn7225 Рік тому
​@@CelalUnal1 I would love adding the x splines as a finishing touch to my speaker boxes natural wood finish. Celal, what would be your recommendation to put these on a large already made box instead of putting them on a small piece with a table saw? I saw an example where a guy had a router sled for his palm router and he was doing dovetails across the corners and tapping them through that look great. Any jigs or techniques that you recommend??
@user-pw2bf1ju7f
@user-pw2bf1ju7f 9 місяців тому
😅😂
@bolatdauylpaz6952
@bolatdauylpaz6952 2 роки тому
Я айтишник, но люблю работать с деревом дома. Поэтому огромное удовольствие доставило данное видео.
@CelalUnal1
@CelalUnal1 2 роки тому
Спасибо. Я рад, что тебе понравилось.
@PluschikovAF
@PluschikovAF 3 роки тому
Лучше один раз увидеть, чем сто раз услышать! 👍🔥👍 Отдельное спасибо за отсутствие "воды"-лучший формат видео! 👍👍👍🤝
@CelalUnal1
@CelalUnal1 3 роки тому
Огромное спасибо. Рад что вам понравилось.😊😊🙌🙌
@user-hi8kj1gk2p
@user-hi8kj1gk2p 3 роки тому
Вот это по нашему, по Бразильский пальцем клей намазывать! Шутка:0))). Ролик отличный! Столько информации за один раз. Спасибо огромное!
@CelalUnal1
@CelalUnal1 3 роки тому
:) Огромное спасибо. Рад что вам понравилось. 🙌🙌🙌🙌
@JustWatch061
@JustWatch061 3 роки тому
ReiS Rusça yazmak zor iş. 😃😃
@CelalUnal1
@CelalUnal1 3 роки тому
@@JustWatch061 valla oyle:)
@danielhanawalt4998
@danielhanawalt4998 23 дні тому
Beautiful work. Can't think of a better way to spend 20 minutes than watching something like that.
@CelalUnal1
@CelalUnal1 12 днів тому
Thank you. I'm glad you liked it.
@user-lo5xw2mp3r
@user-lo5xw2mp3r 2 роки тому
Большое вам спасибо, за то что не поленились снять такое познавательное видео. Все показали точно, кратко без лишних заморочек. Вы настоящий мастер. Крепкого вам здоровья, любви, счастья!
@CelalUnal1
@CelalUnal1 2 роки тому
Спасибо. Я рад что тебе понравилось.😊🙌🙌🙌🙌
@vvvideo_d123
@vvvideo_d123 3 роки тому
Ролик просто супер! Без лишних слов и пафоса как у некоторых "столярных гуру",только самое необходимое,давно такой искал,всё очень наглядно! Лайк и подписка!
@CelalUnal1
@CelalUnal1 3 роки тому
Огромное спасибо. Рад что вам понравилось.
@jacklondon4753
@jacklondon4753 3 роки тому
Это точно. все в одном месте
@user-wp5kd4fm4u
@user-wp5kd4fm4u 3 роки тому
У некоторых получился бы столярный сериал, по серии на каждое соединение. Правда у сериалов свои плюсы, подробнее описание, и всяческие подводные камни описывают.
@williamreymond2669
@williamreymond2669 3 роки тому
I really appreciate how Celal and other UKpostsrs have solved the language barrier so artfully with their skillful video production. I'm sure a lot of thought went into it.
@CelalUnal1
@CelalUnal1 3 роки тому
Thank you so much.😊🙌🙌
@user-pw2bf1ju7f
@user-pw2bf1ju7f 9 місяців тому
​😊❤
@eliasking3015
@eliasking3015 Рік тому
Seriously underrated video. Even in fast forward there is so much to learn not just about the joints, but also cutting tool technique,jig construction, and error correction. Without speaking once
@CelalUnal1
@CelalUnal1 Рік тому
Thank you so much. I am so glad you liked it.
@Devil-Made
@Devil-Made 20 днів тому
Amazing video! These are the kinds of videos I love to find. You don’t waste time introducing what you’re going to show us - you just show us. And you don’t stop to give yourself screen time and explain - you just do it. And you don’t slow and dumb everything down - we can rewind and pause, so why would you? So many great woodworkers don’t make videos for UKposts - they make videos for themselves. But this is the kind of video I can learn from and come back to as reference. Btw, we have nearly the same tools, even down to the carpenter’s square. Lol. You showed me what can be done with what I have in ways I hadn’t realized. Thank you!!
@nsw1959
@nsw1959 3 роки тому
I've been a woodworker for 35 years and this is about the best representation of the types of joints one can make that I think I've seen. even shows how to fix a mistake. Well done.
@CelalUnal1
@CelalUnal1 3 роки тому
Thank you so much. Glad you liked it.
@johnnycorn7225
@johnnycorn7225 Рік тому
Hey Rich, I build large speaker boxes, and I love leaving the natural wood finish on them. I'm really wanting to add the x- style spline joints ( dovetails and dowels too) to my large finished boxes instead of just using screws and glue. Any recommendations on how to add these to an already finished large box as a finishing touch? I saw a track style jig for my DeWalt Palm router that would allow you to clamp up to the corner of a big box and then run the router over the corner perfectly through. Would this be your recommended way? I'm getting excited thinking about the beautiful visual impact of those x-splines, dovetails, and dowels alternating on my faceplates. Some of them are very high power systems and I need that extra strength from more glue surface and want that aesthetic appeal too. Any advice greatly appreciated 👍
@foam_concrete
@foam_concrete 3 роки тому
Подробно показано и главное без "воды" и самолюбование. Заслуженные лайк и подписка.
@CelalUnal1
@CelalUnal1 3 роки тому
Огромное спасибо. Рада что вам понравилось.
@VOICEFORFREEDOM1776
@VOICEFORFREEDOM1776 2 роки тому
Your craftsmanship in nothing short of incredible. Your love for this shows. The equipment is an extension of your body no longer just a tool. It’s as if you’re honoring the tree that was milled. I hope to get to be as half as good. Thank you for sharing this!!
@CelalUnal1
@CelalUnal1 2 роки тому
Thank you so much. I am so glad you liked it.
@stanrob59
@stanrob59 Рік тому
Celal! Thank you for the start to finish on each process. It helps to see it all and I mean ALL steps in each set you provided. After I'm done with my cabinet, I'm going to do some small boxes with some of your techniques to practice for my retirement projects for corporate gifts.
@CelalUnal1
@CelalUnal1 Рік тому
Thank you so much. I am so glad you liked it.🙏😊🙏
@dteberle
@dteberle 3 роки тому
This video should be titled: "How to make awesome tablesaw jigs" This is so awesome!
@pietrozambon7687
@pietrozambon7687 3 роки тому
Cos’è questo
@CelalUnal1
@CelalUnal1 3 роки тому
Thank you for watching.
@swagtactical9255
@swagtactical9255 3 роки тому
i know right? just bought my first, and im happy with it but that little sliding table is exactly what im going to steal first from this vid :)
@arifalmazov5396
@arifalmazov5396 3 роки тому
Ювелирная работа! Видно что, мастер профессиональный и талантливый. Турки - очень талантливые люди.
@CelalUnal1
@CelalUnal1 3 роки тому
Спасибо. Рада что вам понравилось.
@user-ef3ud1rh7f
@user-ef3ud1rh7f 2 роки тому
Ты как скульптор, отсекаешь всё лишнее, и делаешь ОТЛИЧНЫЕ вещи!!!
@CelalUnal1
@CelalUnal1 2 роки тому
Спасибо. Я рад, что тебе понравилось.
@user-kt3dx8ty6l
@user-kt3dx8ty6l 2 роки тому
Просто приятно смотреть на вашу работу, руки у вас в полном порядке, спасибо!
@CelalUnal1
@CelalUnal1 2 роки тому
Спасибо. Я рад что тебе понравилось.
@tmaloney2027
@tmaloney2027 3 роки тому
The jigs are the most beautiful of all. You can see his hand movement's built into their designs.
@CelalUnal1
@CelalUnal1 3 роки тому
Thank you so much. Glad you liked it.
@Boatswain_1961
@Boatswain_1961 3 роки тому
Все соединения прекрасны, а то, где вставки крест-накрест получаются, просто бесподобно, как шнуровка! Даже если не пригодится, просто смотреть на такую профессиональную работу увлекательно!
@CelalUnal1
@CelalUnal1 3 роки тому
Огромное спасибо. Рада что вам понравилось.
@worsedarkdoom2357
@worsedarkdoom2357 2 роки тому
This is the best, simple-and-effective corner tutorial that I've seen. Lots of creative, yet simple corners included, too! Thank you for making this!
@CelalUnal1
@CelalUnal1 2 роки тому
Thank you so much. I am so glad you liked it.
@rashidkochkanov7504
@rashidkochkanov7504 2 роки тому
Спасибо! Отличное видео! Без слов объяснены все способы соединений. Браво, Мастер!!!
@CelalUnal1
@CelalUnal1 2 роки тому
Спасибо. Я рад что тебе понравилось.
@intuitumnox6241
@intuitumnox6241 2 роки тому
@@CelalUnal1 Здравствуйте, а чем вы намазали самое первое соединение брусков? Смола?
@Moriibund419
@Moriibund419 3 роки тому
I love all the hand made jigs instead of some expensive store bought jigs, dato blades and specialty saws . Amazing ingenuity.
@CelalUnal1
@CelalUnal1 3 роки тому
Thank you so much. I am very glad that you like it.🙌🙌😊😊
@goddale2002
@goddale2002 3 роки тому
You're proving that true woodworking is about skill and creativity and not high tech.
@CelalUnal1
@CelalUnal1 3 роки тому
Thank you so much. I am very glad that you like it.🙌🙌🙌😊😊
@user-cj3zk1jg4k
@user-cj3zk1jg4k Рік тому
Круто! Эстетический выбор дело вкуса каждого человека. Интересно практическое применение. К этому видео добавить часть с испытанием на прочность, цены бы не было! Автору однозначно лайк!
@CelalUnal1
@CelalUnal1 Рік тому
Спасибо. Я рад что тебе понравилось.
@abeloewy5458
@abeloewy5458 Рік тому
I've been looking at many youtube videos for wood crafting ideas and examples. This video was great. A very simple and elegant set of corner joint designs that look beautiful when finished. Also I like how the builder showed us in detail how he made the tools he used to create some of these. Very well made. Ahşap işçiliği fikirleri ve örnekleri için birçok youtube videosuna bakıyorum. Bu video harikaydı. Bittiğinde güzel görünen çok basit ve zarif bir köşe bağlantı tasarımları seti. Ayrıca inşaatçının bize bunlardan bazılarını oluşturmak için kullandığı araçları nasıl yaptığını ayrıntılı olarak göstermesi hoşuma gitti. Çok iyi yapılmış.
@CelalUnal1
@CelalUnal1 Рік тому
Thank you very much. I am so glad you liked it.
@user-yp5ph9mf5n
@user-yp5ph9mf5n 3 роки тому
Душа поёт когда смотришь это видео. Спасибо вам. Всех благ.
@CelalUnal1
@CelalUnal1 3 роки тому
Спасибо. Рада что вам понравилось.😊😊🙌🙌
@whitsixkiller
@whitsixkiller 3 роки тому
As someone who works with his hands. It's always fun to see another's craft and acknowledge their mad skills. Bravo sir.
@CelalUnal1
@CelalUnal1 3 роки тому
Thank you so much. Glad you liked it.
@user-tt4uv9de4z
@user-tt4uv9de4z 3 роки тому
@@CelalUnal1 ро
@peteford4388
@peteford4388 2 роки тому
Thanks, I enjoyed this a lot. I wish I had the space to have a table saw, it would save so much time. I love Japanese saws too, so versatile.
@CelalUnal1
@CelalUnal1 2 роки тому
Thank you so much. I am so glad you liked it.
@rudegor858
@rudegor858 9 місяців тому
Celal, большое спасибо! Очень информативное видео о столярных соединениях! Аккуратное исполнение и отсутствие лишней информации! Привет из России!
@CelalUnal1
@CelalUnal1 9 місяців тому
Большое спасибо. Я так рада, что тебе понравилось. Привет из Турции.🙏🙏
@Demetrio_MCK
@Demetrio_MCK 3 роки тому
Сразу видно: первоклассный столяр. Такой большой опыт, а все пальцы целы! :)
@CelalUnal1
@CelalUnal1 3 роки тому
:))Огромное спасибо. Рада что вам понравилось.
@Demetrio_MCK
@Demetrio_MCK 3 роки тому
@@CelalUnal1 И вам спасибо! Я плотник, и хочу сделать для себя столярную мастерскую. Мне было ОЧЕНЬ интересно посмотреть на вашу работу.
@sdmitrnik
@sdmitrnik 3 роки тому
Очень достойное видео! Одно из тысяч,которое доносит всю информацию без слов и по полезности, полезнее йогурта 😁 одно из тысяч,что достойно сохранения в архив!!!👍 Подписался!!!
@CelalUnal1
@CelalUnal1 3 роки тому
Огромное спасибо. Рада что вам понравилось.🙌🙌🙌😊😊
@user-bq6xb8tv2o
@user-bq6xb8tv2o 2 роки тому
Видео круче голливудского боевика. Смотрела не отрываясь до конца, даже не знаю зачем
@CelalUnal1
@CelalUnal1 2 роки тому
Спасибо. Я рад что тебе понравилось.
@user-wb7kg1it3p
@user-wb7kg1it3p 2 роки тому
Отличная работа,отличная съёмка,без лишнего трёпа
@CelalUnal1
@CelalUnal1 2 роки тому
Спасибо. Я рад что тебе понравилось.
@user-kc6iw3cj2j
@user-kc6iw3cj2j 3 роки тому
Браво! Все чётко и по делу, без лишних слов.
@CelalUnal1
@CelalUnal1 3 роки тому
Огромное спасибо. Рада что вам понравилось.
@sonyaqua281
@sonyaqua281 3 роки тому
Респект и уважуха столярам какие делятся секретами , а не забирают их с собой в могилу🖒
@CelalUnal1
@CelalUnal1 3 роки тому
Огромное спасибо. Рада что вам понравилось.
@user-we5pz4dz2q
@user-we5pz4dz2q 2 роки тому
блин, а я все на синию изоленту. а ту вон как)))) молодец. учту теперь
@CelalUnal1
@CelalUnal1 2 роки тому
Спасибо. Я рад что тебе понравилось.
@kieranfoster902
@kieranfoster902 3 роки тому
Nice ideas. I really liked the angled splines. They looked really smart.
@CelalUnal1
@CelalUnal1 3 роки тому
Thank you so much. Glad you liked it.
@musaedjassim9678
@musaedjassim9678 2 роки тому
Thank you for sharing this content. Very helpful and you made everything looks easy while i am sure it’s not. I can only tell you that this is most amazing step by step video i’ve seen in youtube. Great job👏🏽👏🏽
@preacher1775
@preacher1775 Рік тому
Many times in the past, I have admired the joints made by others and wondered how they did it. This guy, without saying a word, made the perfect video about doing just that! He made it look so simple. But mainly, by this video, he gave me the simplest but the best joints imaginable! He's a genius!
@CelalUnal1
@CelalUnal1 Рік тому
Thank you so much. I am so glad you liked it.
@socalduck1
@socalduck1 Рік тому
I agree with the comments below. This is the best and simplest corner tutorial that I've ever seen. Thank you so very much.
@CelalUnal1
@CelalUnal1 Рік тому
Thank you very much. I am so glad you liked it.
@alexvrk8538
@alexvrk8538 3 роки тому
Наглядно, лаконично, подробно - великолепная подача материала. Спасибо, автор! Пойду смотреть, что ещё есть на канале - если остальное в таком же духе, то это однозначно подписка.
@CelalUnal1
@CelalUnal1 3 роки тому
Огромное спасибо. Рад что вам понравилось.
@EnvisionGW
@EnvisionGW 2 роки тому
essa definitivamente é a assinatura dele!, eu acompanho esse canal desde dos primeiros vídeos! e se tem alguém que mereceu está onde está é ele... dedicado e muito talentoso... qualquer conteúdo que achar no canal dele é excelente! inclusive. é meu ponto de referencia!
@user-zv3kq4mc4n
@user-zv3kq4mc4n 3 роки тому
Много лайков!! Благодарю за ценную информацию и виртуозный труд!
@CelalUnal1
@CelalUnal1 3 роки тому
Огромное спасибо. Рад что вам понравилось.
@user-zv3kq4mc4n
@user-zv3kq4mc4n 3 роки тому
@@CelalUnal1 😊
@theweatherisaokay4964
@theweatherisaokay4964 2 роки тому
Super fast, clear and simple to understand tutorial. Best I've ever seen.
@CelalUnal1
@CelalUnal1 2 роки тому
Thank you so much. I am so glad you liked it.
@p1ekid
@p1ekid Рік тому
This video might just have saved me. I’ve decided to do a complex woodworking project for my dads birthday. I’ve been doing joinery on houses for years but that work is all about speed and it’s not visible so I don’t normally care if you can see the fixings etc. My dad was a woodworking teacher for 30 years so I need some good looking woodwork and I think this video might just help me do that. Thanks!
@CelalUnal1
@CelalUnal1 Рік тому
Thank you so much. I am so glad you liked it.
@michaelriley2279
@michaelriley2279 3 роки тому
60 years ago I started my apprenticeship as a cabinet maker, my bench master was a Welshman who taught me all of these joints and a few more, but back then we didn't have the hand power tools of today so most of it was by hand. I wish I had a Japanese pull saw for trimming the splines and the small sliding saw would have been handy. You Sir are a true Craftsman and I take my hat off to you. I also liked your technique for filling the overcut dovetail too.
@CelalUnal1
@CelalUnal1 3 роки тому
Thank you so much. I am very glad that you like it. Greetings from Turkey.🙌🙌🙌😊😊
@aaronluckette
@aaronluckette 3 роки тому
@@CelalUnal1 After your inspiring video, I am looking to buy a Japanese pull saw. What is the exact kind you have here (7:37)? I'm not sure I like the one's with a back "spine" because I would think they might cause a slight bend in the cut when doing something where the spine will hit the workpiece...so I like yours...but can't find it. Thanks so much! Love your video!
@CelalUnal1
@CelalUnal1 3 роки тому
@@aaronluckette In fact, each type should be for a separate job. Those with upper keels are very nice for swallow joining. There are also bilateral corners. This can be preferred. Mine is with a thin blade and one-sided. A handy Japanese saw.
@aaronluckette
@aaronluckette 3 роки тому
@@CelalUnal1 I bought the "SUIZAN Japanese Hand Saw Pull Saw 7 Inch Flush Cut Saw Trim Saw for Woodworking"...it bends too much. On my test-piece, it started cutting into the piece near the edge (I am doing exactly what you've shown at 7:34). I need one that will not bend but does not have that spine. Do you know EXACTLY what one you bought? I literally want to buy that same exact model but cannot find it. Thanks again! Cheers!
@CelalUnal1
@CelalUnal1 3 роки тому
@@aaronluckette The saw you bought is very nice. If there is no hard straightening profile on the saw, it will bend when it is pressed too hard. Since I cut it slowly, there is not much bending. But when there is a fast speed cut, sometimes there is a twist. It's a little sensitive. I hope I've spelled correctly.
@user-do2yh2pu6i
@user-do2yh2pu6i 3 роки тому
Отличное видео! Спасибо большое! Приятно смотреть как Вы ловко это делаете!
@CelalUnal1
@CelalUnal1 3 роки тому
Огромное спасибо. Рад что вам понравилось.
@El-Sid-Ldn
@El-Sid-Ldn 2 роки тому
Excellent work my friend. The finish of the joint at 8:10 is stunning (will definitely be trying that). This video made me want to get straight into the workshop. Very creative and inspiring 👍🏽👏🏽
@CelalUnal1
@CelalUnal1 2 роки тому
Thank you so much. I am so glad you liked it.
@danielwhitaker5445
@danielwhitaker5445 Рік тому
... this was as relaxing as a triple straight, slow sippin' bourbon on my porch while it rains evening! Sincerest Thanks Celal for sharing your woodsmithing passion!!
@CelalUnal1
@CelalUnal1 Рік тому
Thank you so much.
@maradall
@maradall 3 роки тому
Beautiful work! Some of my earliest memories are of sitting on the workbench & watching my Dad carefully chisel out dovetail joints... it was in the days way before table saws, but 60+ years later those drawers are still 100% solid, no matter the rough treatment from 5 kids.
@CelalUnal1
@CelalUnal1 3 роки тому
Thank you so much. I am very glad that you like it.
@quintonsuyker6526
@quintonsuyker6526 3 роки тому
Artwork. It is pure art. As a woodworker for years i truly appreciate this true craftsman ship . Thank you for sharing
@CelalUnal1
@CelalUnal1 3 роки тому
Thank you so much. I am very glad that you like it.
@jerryhammond2730
@jerryhammond2730 2 роки тому
This is just what I've been looking for. Great video about corner joining. You show step by step, even how to set up the jigs necessary for some of the joints. Thank you for this excellent video.
@CelalUnal1
@CelalUnal1 2 роки тому
Thank you so much. I am so glad you liked it.
@jennknows_
@jennknows_ 2 роки тому
You Sir are FANTASTIC! I have just sat for an hour on my home tv and watched videos. I love all of your work. I’ve learned so much.
@CelalUnal1
@CelalUnal1 2 роки тому
Thank you so much. I am so glad you liked it.
@yokebuk333
@yokebuk333 3 роки тому
Делаю первые шаги. Очень полезное видео!
@CelalUnal1
@CelalUnal1 3 роки тому
Огромное спасибо. Рад что вам понравилось.Желаю удобства.
@donaldhamel9311
@donaldhamel9311 3 роки тому
You sir are a true educator, you teach by doing, and they learn by watching, which is the way I have educated myself in the 63 years I've been in this world and from the time I was 19 I never looked for a job, being a graphic artist, woodworker and metal fabricator, all the jobs I had over that time came looking for me, and never once went to college, but I can say I'm still learning, even from younger guys like you. Now I'm going out to my shop and create some new jigs, thanks to you, thank you very much
@CelalUnal1
@CelalUnal1 3 роки тому
Thank you very much, master. I am very glad that you like it. It's really nice to hear from you. I'm sure there is a lot to learn from you. Regards, greetings, master.
@user-geranin
@user-geranin 2 роки тому
Eğer büyük bir usta. Dersler için teşekkürler. Videolarınızı izlemek çok güzel.
@CelalUnal1
@CelalUnal1 2 роки тому
Çok teşekkür ederim. Beğendiğine çok sevindim.
@holderminer4300
@holderminer4300 Рік тому
Вот это любит человек своё столярство! Мастер 👍
@CelalUnal1
@CelalUnal1 Рік тому
Большое спасибо. Я так рада, что тебе понравилось.🙏
@Ozninjaguy
@Ozninjaguy 2 роки тому
Great work - inspiring, and also showed me what extra things I can do with my table saw. Thank you!
@CelalUnal1
@CelalUnal1 2 роки тому
Thank you so much. I am so glad you liked it.
@user-zc3de9sx5d
@user-zc3de9sx5d 3 роки тому
Просто смотреть - огромное удовольствие. Молодец! Удачи и успехов в труде.
@CelalUnal1
@CelalUnal1 3 роки тому
Спасибо. Рада что вам понравилось.😊😊🙌🙌🙌
@Doom_Stoner_Rock_for_RU
@Doom_Stoner_Rock_for_RU 2 роки тому
Спасибо огромное!!! Это гениально! Вашему видео нет цены! Я как начинающий мастер просто счастлив его нахождению!
@CelalUnal1
@CelalUnal1 2 роки тому
Спасибо. Я рад что тебе понравилось.
@2008mmvii
@2008mmvii 2 роки тому
Kudos to you, big time. No boring music, story telling, advertising or self-promoting, pets wandering around, lame jokes, etc. Straight to the point and simple to understand. Creative indeed, and just let the vid tell the whole story. My critique, however, is that not all examples are simple because they involve more tools, making jigs, and lots of cutting.
@CelalUnal1
@CelalUnal1 2 роки тому
Thank you so much. I am so glad you liked it.
@user-zi4td2zx1q
@user-zi4td2zx1q 3 роки тому
Руки и голова растут откуда надо. Молодец! В гараже на коленке не все соединения получатся, но некоторые можно применить. Респект мастеру :)
@CelalUnal1
@CelalUnal1 3 роки тому
Огромное спасибо. Рада что вам понравилось.
@billsedutto8824
@billsedutto8824 3 роки тому
There’s nothing like hand cut dovetails. That’s on my list of things to learn how to do but will have to start with the basic joints first. Great video!
@CelalUnal1
@CelalUnal1 3 роки тому
Thank you so much. I am very glad that you like it.
@julin2rs548
@julin2rs548 Рік тому
This video is AMAZING. My dad was really good at everything and built two of our homes. It is just unreal what you can build by yourself (with tools) and youtube's guidance.
@user-gs4ms6xo5w
@user-gs4ms6xo5w 2 роки тому
Отличное видео, никакого лишнего 3,14здежа . СПАСИБО !!!
@CelalUnal1
@CelalUnal1 2 роки тому
Спасибо. Я рад что тебе понравилось.
@jumbolaidajumbolaida1203
@jumbolaidajumbolaida1203 3 роки тому
Малотчик, нет слов. Просто идеальные, красивые и прочные соединения, возьмём на заметку. Спасибо за видео обзор. 🤝
@CelalUnal1
@CelalUnal1 3 роки тому
Огромное спасибо. Рад что вам понравилось.
@domingosperez5280
@domingosperez5280 2 роки тому
Achei muito interessante e simples a primeira união. Todas são muito boas.
@ahceneboumahraz6570
@ahceneboumahraz6570 2 роки тому
De ni
@rakeshvashisht7268
@rakeshvashisht7268 2 роки тому
ऋनध।।।।
@jumbolaidajumbolaida1203
@jumbolaidajumbolaida1203 2 роки тому
@@rakeshvashisht7268 👍🤝
@dresserinpleasure
@dresserinpleasure 3 роки тому
Очень круто! СпасиБо! Смотрел просто залипнув! Эх попасть бы к такому специалисту в подмастерья :)
@CelalUnal1
@CelalUnal1 3 роки тому
Огромное спасибо. Рад что вам понравилось.
@user-ef7ty3hl4n
@user-ef7ty3hl4n 2 роки тому
С наступающим новым годом вас друзья, творческих успехов, исполнения желаний, здоровья, удачи!!!!
@CelalUnal1
@CelalUnal1 2 роки тому
Спасибо. Я рад что тебе понравилось.😊😊🙌🙌🙌
@alanfreedman5877
@alanfreedman5877 2 роки тому
I love these techniques. I just applied the dowel technique from 2:10 to 4:05 and it came out really nice. Going to try some others today. Thanks.
@CelalUnal1
@CelalUnal1 2 роки тому
Thank you so much. I am so glad you liked it. I wish conveniences.
@williamreymond2669
@williamreymond2669 3 роки тому
17:00]. I love that tiny stub-chisel! Gotta make one of those.
@CelalUnal1
@CelalUnal1 3 роки тому
Thank you so much. Glad you liked it.
@msgajhimelret9496
@msgajhimelret9496 3 роки тому
Wonderful craftsmanship; thinking of using these on the corners of my workbench in 2x4s, different one for each corner... why not.. just the wood is longer and thicker.. Thank you for sharing
@CelalUnal1
@CelalUnal1 3 роки тому
Thank you so much. 🙌🙌😊😊
@philipcatuogno2968
@philipcatuogno2968 2 роки тому
I'm a rookie woodworker and am inspired to strive to be half as proficient as you are. BRAVO! Molto bene!
@CelalUnal1
@CelalUnal1 2 роки тому
Thank you so much. I am so glad you liked it.
@johnkramer6593
@johnkramer6593 Рік тому
I greatly appreciate you sharing these techniques. It has truly inspired me to know that this type of joinery can be achieved with the tools that you are using. Thank you!
@CelalUnal1
@CelalUnal1 Рік тому
Thank you so much. I am so glad you liked it.
@ricardosoares4006
@ricardosoares4006 2 роки тому
Oi Celal. Muito bom seu vídeo, principalmente pra mim que estou começando a descobrir a marcenaria e querendo muito fazer minhas peças. Parabéns!
@CelalUnal1
@CelalUnal1 2 роки тому
Muito obrigado. Estou tão feliz que você gostou.
@freedomtrailamerica2981
@freedomtrailamerica2981 3 роки тому
Thank you for sharing your years of experience. Your lessons are very clear❤
@CelalUnal1
@CelalUnal1 3 роки тому
Thank you so much. I am very glad that you like it.
@solotheater
@solotheater Рік тому
that covert chisel for secret screw technique... just saved my kitchen project. thanks!
@CelalUnal1
@CelalUnal1 Рік тому
Thank you so much.
@bleucheeselove
@bleucheeselove Рік тому
I was mesmerized watching you work! Those are beautiful and you make it look so simple! I've never seen the different methods. Clearly a seasoned natural craftsman. 💯
@CelalUnal1
@CelalUnal1 Рік тому
Thank you so much. I am so glad you liked it.
@takoyucky
@takoyucky 3 роки тому
I don’t do woodworking but I appreciate your craftsmanship and the effort that went into making the video!
@CelalUnal1
@CelalUnal1 3 роки тому
Thank you so much. I am very glad that you like it.🙌🙌🙌🙌😊
@koryak006
@koryak006 3 роки тому
Thank you for sharing man. This man's carpenter skills are really high.
@CelalUnal1
@CelalUnal1 3 роки тому
Thank you so much. I am very glad that you like it.
@Ludi_na_Blude
@Ludi_na_Blude 2 роки тому
Дилетант от профессионала отличается невниманием к мелочам, которые в любом деле имеют ключевую роль. Спасибо, профессионально!
@CelalUnal1
@CelalUnal1 2 роки тому
Спасибо. Я рад, что тебе понравилось.
@mallendo
@mallendo 2 роки тому
First-class craftsmen. Learned something again.
@CelalUnal1
@CelalUnal1 2 роки тому
Thank you so much. I am so glad you liked it.
@sandrobarigelli8054
@sandrobarigelli8054 3 роки тому
I’d need something more and more than “I like” for this guy. Awesome job man, thank you.
@CelalUnal1
@CelalUnal1 3 роки тому
Thank you so much. I am very glad that you like it.
@heartobefelt
@heartobefelt 2 роки тому
@@CelalUnal1 much higher quality than many videos on UKposts these days Celal . superb work :)
@tenj00
@tenj00 2 роки тому
@@CelalUnal1 I think Sandro is asking you for a way to donate to you. :)
@ronperalta7218
@ronperalta7218 3 роки тому
An true artist, using a few low cost tools to produce beauty. I'm inspired by you. Many thanks.
@CelalUnal1
@CelalUnal1 3 роки тому
Thank you so much. I am very glad that you like it.
@mrJv2k7
@mrJv2k7 3 роки тому
low-cost tools? that table saw looks kinda nice. and by nice I mean pricey :)
@mowburnt
@mowburnt 2 роки тому
Fantastic! I was not feeling very confident about corner joints then saw how easy it is to make some great looking and strong joints. Thanks!
@CelalUnal1
@CelalUnal1 2 роки тому
Thank you so much. I am so glad you liked it.
@northmillstudio
@northmillstudio 23 дні тому
I absolutely love that angled miter spline technique around 7:29, that is so cool. Definitely will have to try that
@user-om8hr2nl2r
@user-om8hr2nl2r 3 роки тому
Здорово! Все виды угловых соединений в одном ролике!👍👍👍
@CelalUnal1
@CelalUnal1 3 роки тому
Огромное спасибо. Рад что вам понравилось.
@RoyalGentoo
@RoyalGentoo 3 роки тому
I don't normally comment about videos, but your examples of different corner joints was extremely entertaining and informational. Fun to watch! Thank you for your efforts. I'm going to try some of these!
@CelalUnal1
@CelalUnal1 3 роки тому
Thank you so much. I am very glad that you like it.😊🙌🙌🙌
@withabike
@withabike 9 місяців тому
Your video is very attractive, creative, vibrant, colorful and interesting! thanks for sharing! Learn from you! I wish you good luck every day!
@CelalUnal1
@CelalUnal1 9 місяців тому
Thank you very much . I am so glad you liked it.🙏🙏🙏
@user-fx6oz9nf3w
@user-fx6oz9nf3w 2 роки тому
Шедевр, так просто и не просто, но понятно и можно повторить.
@CelalUnal1
@CelalUnal1 2 роки тому
Спасибо. Я рад что тебе понравилось.
@Mannymachtwas
@Mannymachtwas 3 роки тому
Ich bin selbst Tischler und es waren zwei Verbindungen dabei, welche ich noch nicht kannte. Danke, das ist ein wunderschön gemachter Film.
@CelalUnal1
@CelalUnal1 3 роки тому
Ich danke dir sehr. Ich bin froh, dass es dir gefallen hat.🙌🙌🙌
@matthewrhoades5156
@matthewrhoades5156 3 роки тому
Wow! This how-to video is incredible. This person makes the joints look so easy; but you know there is a lot of skill involved. Really exceptional camera work! I really liked the table saw sled ideas. I also really liked the hand-cut, mitered dovetails near the end. Beautiful work! Hang on until the end for the complete review. This guy is really, really talented.
@CelalUnal1
@CelalUnal1 3 роки тому
Thank you so much. Glad you liked it. Greetings from Turkey.😊😊😊🙌🙌🙌🙌
@taylorsessions4143
@taylorsessions4143 3 роки тому
You know a guy has developed his talent when he can make something look easy. I have fallen for it in the past, and it's humbling to go try it myself!
@prgelectric5104
@prgelectric5104 2 роки тому
I was thinking the same thing he makes it look easy. The amazing thing is the free hand angle drilling imo. I am very good with tools for over 20yrs and I would likely mess up one myself. That jig he made up is really awesome as well. Great video !
@martinzaragoza1372
@martinzaragoza1372 Рік тому
Felicitaciones...!! Gracias por compartir tus conocimientos...!! Un abrazo desde Argentina...!
@CelalUnal1
@CelalUnal1 Рік тому
Muchas gracias. Me alegra que te guste. Saludos desde Turquía.
@BigDog-cy4qk
@BigDog-cy4qk Рік тому
I'm so thankful that we don't have to listen to your voice, bless you my son x
@CelalUnal1
@CelalUnal1 Рік тому
Thank you so much.
@colejohnson1960
@colejohnson1960 3 роки тому
Thank you for taking the time to make this video and sharing it. This one is a keeper as I plan on using some of these joints when I start my box building. You have excellent woodworking and video making skills.
@CelalUnal1
@CelalUnal1 3 роки тому
Thank you so much. I am very glad that you like it.😊😊🙌🙌🙌
@planetaryqueen9469
@planetaryqueen9469 3 роки тому
That is Talent Art . Imagine a canopy bed corners in Cherry oakwood or light grayish oakwood.
@CelalUnal1
@CelalUnal1 3 роки тому
Yes it would be nice. Thank you so much.
@slm6649
@slm6649 2 роки тому
Vallahi tam bana hitab ediyor.. çok basarili ve faydalı buluyorum calismalarini Celal kardeş sağolasın.
@CelalUnal1
@CelalUnal1 2 роки тому
Çok teşekkür ederim. Beğendiğine çok sevindim.
@dianakesl1814
@dianakesl1814 2 роки тому
I'm a beginner late in life and this shows me how much I have to learn. This man is amazing. ( Russell)
@CelalUnal1
@CelalUnal1 2 роки тому
Thank you so much. I am so glad you liked it.
@alokmittar1034
@alokmittar1034 3 роки тому
the level of cleanliness in his work is just outstanding!!!
@CelalUnal1
@CelalUnal1 3 роки тому
Thank you so much. I am very glad you liked it.
@alokmittar1034
@alokmittar1034 3 роки тому
@@CelalUnal1 why need to be glad??? the level of skill you have take years to master and i have a keen eye to appreciate it!!!!!!! loved ur work
@paulweston8184
@paulweston8184 3 роки тому
The man keeps his wood clean.
Wood joints / Wood corner joints / Woodworking
12:39
Celal Ünal
Переглядів 719 тис.
What's the Best Wood Joint || Insanely Strong Joinery!
25:34
Bourbon Moth Woodworking
Переглядів 1,3 млн
Wood corner joints / Woodworking joints / Part 2
20:23
Celal Ünal
Переглядів 2,8 млн
Woodworking // Wooden box with finger joints / Making a wooden box
13:04
Slöjda en ask/skrin
13:22
Slöjden!
Переглядів 14 тис.
⚡ The Special Wooden Box / Invisible Wooden Hinge - Using basic tools / Dovetail Joints
17:07
Making dowels / How to make dowel maker
8:48
Celal Ünal
Переглядів 3,9 млн
SUPER SUPER Simple Dovetail Joint
6:15
GRINwood
Переглядів 3,7 млн
5 Alternative Dovetail Joint Ideas
7:22
GRINwood
Переглядів 1,4 млн
Woodworking / Wooden joints part 1
20:02
Celal Ünal
Переглядів 2,2 млн
Woodworking // Simple table saw sleds
16:03
Celal Ünal
Переглядів 2,7 млн
Woodworking / Wood joint techniques / Wooden corner joints
25:01
Celal Ünal
Переглядів 1,2 млн
НОВОЕ АВТО НА РЫНКЕ 🇰🇿
1:01
Travelove 100
Переглядів 10 млн
рыбанутый рыбнадзор
0:24
крутая бабушка!😎✌
Переглядів 2 млн
Самый большой бутер в столовке! @krus-kos
0:42
Кушать Хочу
Переглядів 5 млн
Solo se hace si lo crees posible💰🤯
0:20
Cash Vault💰
Переглядів 10 млн
Суші-кульки😋😋😋
0:37
Igor Shpigunov
Переглядів 187 тис.