Pretty sure that ceiling will have asbestos in. If you’re doing that every rewire you might want to get your CAT B asbestos training done so you can protect you, your family and your customers from the long term effects of asbestos exposure.

Hey Nick, Would be great to see a updated pricing video and how you quote a job including labour.

I’ve subscribed. Can’t wait for content. I love the new studio!!

The armed floor cutter is suppose to be used on weyrock flooring not plywood. That's why it's getting caught up and struggling.

Pricing breakdown video would be good 👍 would be interesting to see how others do it.

Hey Nick saw you today at the installer show was gonna come and say hi but you looked busy. Keep up with the videos there great to watch

Up to date pricing & breakdown would be good Nick. Thanks

Drinking on the job again? hahaha I love Tradify, got it from your recommendation 2 years ago and never looked back. Loving the beard growing. Keep up the good work guys

Someone's gotta pay for the Transporter EV Artisan bought!

I had a large 4-bedroom cottage done in 2019 for £4000. It was a new board, it hadn't been rewired from the 1940s. LED everything. Don't forget the cost of replastering every ripped wall too. That was about 5 or 6 guys hammering it in 3 1/2 days.

You’re doing all the rewires I don’t want to do, keep it up.

definitley helpful thanks for sharing

artisan electrics requires you not to just re-wire but to re-mortgage your house to pay for it. 30K for a rewire!

Please tell me you had that ceiling scraped😂😂 we don’t wanna lose you Nick!

Another great video guys! 💯

Integral LED Evofire range of spots take a Gu10 fitting, I.P.65 rating & firerated & have a really neat thin bezel & are around £7.00. I fit then in everywhere.

You doing a great job keep up the good work😃💡🪛👍👍👍

love the Smirnoff in the back

Great content mate. We do 130 rewires a year (6 of us) and I must say that is a very good price for the spec! Why Mercedes would be a Ferrari if I could get them prices! Keep it up pal

Love the Artisan banter

3.5 to 4k top end 3 bedroom house 4 double sockets each room. Loft lighting and sockets armoured cable to garage with lighting.all fire alarms inter linked.

As a consumer I wouldn't pay more than 10k for a rewire and certicate.for a 3-4 bedroom house.

Be aware that the quoted cost is only for one trade. there is then the whole issue of making good that often costs as much again with all the aggravation of getting all the other trades involved, plasterers carpenters/joiners and decorators and all that is without the temptation to carry out updates and upgrades. Its annoying that there always seems to be the need to rewire and upgrade electrical installation as the IEE regs keep changing. If that is the case why aren't the installations future proof so that there are wireways created throughout at the buildings construction. My house was built by the previous owner in 1953 and benefits throughout with buried conduit that allows cabling to be replace at ease.

Really enjoy the vids guys, do you survey for asbestos before you get stuck in? Thats an artex ceiling which can and more than likely contains it in that era of property, really easy to get tested and well worth doing at pricing stage if you don’t already do this 👍

Saw you at the installershow yesterday but didn’t have the bottle to come and say hello😂 didn’t realise you were so tall haha Keep up the great work⚡️👍

The sparky we have charged about the same as you, if someone's spending £25,000 they have far to much money.

Defo a video on pricing please🙏

Do you think the usb sockets are worth it these days. Everything is going USBC from A and even if they are USBC, the tech in them in ever evolving to allow rapid charging. I also worry about there being cheap circuitry in them compared to a branded charger such as anker

I worked it out the other day and good on him. Nick is earning just shy of 100k a year which includes his sponsors & UKposts

Love these guys 🙂🇮🇪☘️

all thats silicone to hold up light fittings don't come cheap that's why your not as dear as artisan plus he has to make up for his shoddy solar PV installs

Would appreciate a pricing video please

Hi Nick, Did you put the Wago's into the backplate of the light, or did you put them into a MF box?

And also in Dublin we are around €120 per point, which sounds a lot but all RCBO circuits SFP and LSFH cables, earth rods and Certs for every job

House wiring is better quality and safer than it used to be. But it's got to an ever increasing point of being far too expensive, it doesn't have to be Rolls Royce to be safe and to code.

The ceiling in the kitchen, was that artex tested for asbestos?

Yeah I'd be interested to hear a breakdown of that quote seems a fair price really to me but yeah I'd deffo watch that video and if you an updated price list one that would be good also

up to date pricing video? yes please 🙂

Be interesting to see your price per point v the price for that job if you priced it the labour & materials method see what the difference would have been if any … I always do materials & labour method bit takes along time yet to crack the code of per point to speed it up always comes out miles off for me

Have you ever used the QuickWire T-Connector for spots? be interested in your view on them if you can try them, seeing Adam put earth sleeving on those spots... you dont need it with those.

Amazing price for job you do fair play

8:15 broom in shot!😮 notice no video of the electrain using it.

That thumbnail made my day!!! Lol

I see Jordan is now using more and more Fusebox boards instead of Hager,

did ya test that artex for asbestos?

I have never come across a Philips light fitting of any type, that was well designed, made and easy too install. They fail on all three points every time.

Ngl i actually unsubbed to Artisan a while back. Jordan was pushing subscribers to pay for "premium" content, when in fact his viewer base is mostly of electricians who may not have the expendable cash after charging 6k for a rewire instead of 50

Who needs a ladder when nic's around 😂

That’s where I left my vodka….😮 Haven’t been in Stafford for years. 😢

Nice Artex ceiling

I had a 20 panel, 6KW solar/battery system installed for less than half the Artisan starting price. Also a zappi charger all in again for less than half price. There are cowboys out there so cheap is not always best but super expensive is also bad news. Your £5000 I would expect Artisan to come in at £12,000, just a bit over double. £25K is beyond a joke. Really jaw dropping.

Love that thumbnail 🤣

Not referring to you Nick ..but is the idea to earn a good living plus a healthy extra lump for comfort....or is it to shaft everyone in sight before it all goes tits up .. with some its clearly the latter 😮

Look i know I'm really tight but the philips hue stuff seems way overpriced imho.

People arguing with rewiring but forget that the job is stressful, difficult and must be done with great care (and a little bit of love) and usually is a permanent (10+ years) installation.

Artisans prices are insane. like double or triple the price of every other spark.

Why are you adding a switch fused spur ? Instead of a 20 amp switch ?

Beards looking good mate. When's the next video on that

whats the mic your using mate ?

Out of interest what do you use to cut those holes in the floor in front of the sockets as they look like there’s a lip to put them back down or is it just a normal hole saw

ACM in that artex looked at the age of that kitchen

What's the day rate in the Midlands area nowadays?

Part of me wishes I had the knowledge/experience to do this, and that same part of me also kinda wishes I did a carpentry apprenticeship which I feel would have the best job satisfaction being able to do a bit of everything being the jack of all trades. The other part of me is glad I didn't, I did a little bit of mixed domestic/industrial work for the first 18 months of my apprenticeship but then got shifted into mining/shaftsinking work, now I'm the guy that can walk in dick swinging on $85/hr just because I have experience on sandvik/atlas copco drill rigs, raisebores and winders. I've been flown into africa business class and back just to spend literally 8 minutes diagnosing a faulty raisebore lube pressure switch before. But I'd be absolutely fucked trying to coordinate a re-wire on a janky old house. I'm payed very well but I feel like a bit of a fraud because nowadays theres no way I could compete bidding on any domestic/commercial or industrial jobs except for niche faultfinding

Nice job guys obviously no materials from city’s there 😅💰

Can't believe you still use earths sleaving! We stopped using bare earth cable 6 years ago, I still keep a bit in the van in case someone did not use it on an old job.

😂😂 the thumbnail

@0:35 "We've just bought a brand new hole from the hole seller" -that's what I heard lol.

I filed my Ameg to a 45 degree tooth kinda thing, found it a much better cut.

I advise any youngsters not to take up this trade if you like money, the trade has no vanity value, no customer will invite friends around to see your sockets, customers are always happy to pay for kitchens and bathrooms and garden sheds.the electrical part of those jobs aren't even considered apart from down lights. Its more lucrative been a trade that has something to show, I do know what I'm talking about after 47 years in the business.

Those joists are son thin and far apart. good job they sit on concrete.

Nick, how much do you charge per point? I’m at £65 per point at the moment. So for sockets it’s £65/point For lighting I do £65/switch then £65 pendant. Is this in your realm of pricing?

Wow - very very low ceilings.

A rewire should be between £4000-7000 MAX That guy from the other videos charged like £25,000/30,000 he's a total RIP OFF imo.

Not sure if its just me but there is no sound

My eye keeps clocking the vodka in the kitchen haha

that bottle of Smirnoff tho

Can I just say that the bottle of vodka on the side at the job site is not the best advert I've ever seen from a tradesperson.

That Artex looks ancient. Hope you got an Asbestos Survey done before drilling holes in it.

Should be no more than materials plus 16 hours labour, two evenings 6pm to 10pm after a full days work for two in a professional engineering day job was the norm for fully rewiring a three bed semi back in the 1980’s, that’s with loads of sockets, cable below the surface and fully tested, just needing a plasterer the next day. Any more and it’s really just subsidising a ‘megastar’ lavish lifestyle. 😀

I was charged 4500 for a 3 bed rewire

What was the reason for rewire? I would of karate kicked that old kitchen out the back door. Why you working round it?

😳Nice & expensive lights - professionally fitted. But .... into a shit & swirly artex finished ceiling 🤣

25k for a rewire ! Give me a break ! Guess that's how you buy a 100 grand work van !

Lived in rewires used to be what electricians did when they was no other work available as they are hard work constantly and filthy horrible jobs. Price accordingly unless there’s another 30 sparks pricing for the job and you’re desperate then the cheapest will come in under 2 k ha ha

Lived in rewires are one short of the bottom of the pile as far as work goes. Working for slum landlords being the worst.

Forget artisan... what's happened with the bought beard 🤔

That £250 light should be £50.

£25,000 is what Jordan is getting off some old people with dementia 😂

wtf is wrong with that lamp. IT doesn't have a cable sleeve to hide the cable and it doesn't have a cover for the mounting plate. What's with expensive stuff just being.... incomplete

That’s like 10k In Ireland wow haha

Yeah remove that earth sleeving from the van incase it’s stollen and sold to DIYers in the pub 😂

Arh you don’t really need earth sleeving and capping anyway 😂

Sounds cheap, I paid way over that for similar 4 years agi

can't get my head round artisan prices how does he get work at that price i'd only work 2 days a week lol

25k for a rewire 😂😂😂😂

How tall are you or is that a dolls house?

Lets face it corey made Artisan.

5000 wow its expensive now to re-wire your house

Who the fook has artex ceilings these days.. 😳 Watch you don't rub your skull into that shit Nick 😀....... 👍

I work with u plz