Cutting Board for Beginners | Woodworking Basics
Переглядів 1,714,313
4 роки томуA step-by-step tutorial and everything you need to know about making a CUTTING BOARD.
Cutting boards are typically a beginner woodworker's first project, BUT there are a few things you should know before gluing some pieces of wood together. In this video, I document my entire process of making a beautiful, edge grain, walnut cutting board from start to finish.
CNC: www.inventables.com/products/...
Support me on Patreon: / casualbuilds
As always, if you found this video help, please hit the like button and be sure to subscribe to see all future beginner and DIY woodworking content.
#cuttingboard #woodworking #diy
---
TOOLS/PRODUCTS IN THIS VIDEO //
- Mineral Oil: amzn.to/2VLbQlK
- Mineral Oil with Waxes (Conditioner): amzn.to/3aEK4eY
- Toggle Clamps (for my jointer jig): amzn.to/2XC7JrW
- Bessey Pipe Clamps: amzn.to/3bXB4Tq
- Titebond III Wood Glue: amzn.to/2W2s6xE
- Freud 10" x 24T Heavy-Duty Rip Blade: amzn.to/2xyaS38
- Painter's Tripod/Pyramid (not the one's I have, but similar): amzn.to/3bWkkLM
- Planer: amzn.to/2A9oNxx
- Jointer: amzn.to/3guVZzW
- Router: amzn.to/2WeW56k
- CNC: www.inventables.com/products/...
⚒️ All Tools & Equipment - casualbuilds.com/tools/
As an Amazon Associate I earn from qualifying purchases.
FOLLOW //
- Instagram: / casualbuilds
- Facebook: / casualbuilds
- Twitch: / casualbuilds
- Website: www.casualbuilds.com
@CasualBuilds 4 роки тому
I tried to cover everything about making cutting boards - let me know if I missed anything below!
@anthonycawood591 3 роки тому
Can this be done with Pine?
@CasualBuilds 3 роки тому
I wouldn't recommend using pine for cutting boards, it's a soft wood and can chip/dent very easily.
@aarongray1185 3 роки тому
You should check out Walrus Oil. I’ve been making boards for a little while and started out with that mineral oil and butchers block wax you used but switched to Walrus Oil and love it. Awesome video!
@CasualBuilds 3 роки тому
Thanks Aaron!
@MCLRTR 3 роки тому
Would have loved to see how you arrange the different strips in detail. For the looks of the board and also in a technical standpoint in terms of grain to prevent warping
@bobbigrant9158 8 місяців тому
I've had the chance to use this table a couple of times now. It's fun to whip out in front of people:) I can see what people are talking about when they say the legs are delicate, but they're design to support a "mostly" vertical load, not be torqued from the side or pushed back into place. If you just let the table open or close on it's own and don't force anything, it works great ukposts.infoUgkxyFZUPFEey-PuqsPMxqaykBhgA1LWxFHh Once it's set up, it's pretty solid. My only gripe would probably be related to the clamps provided. They're not the highest quality. They do the job, so no big deal, but they could be better. All in all, pretty cool gadget.
@essexbarnworkshop8578 3 роки тому
Beginners woodworking in the UK = a hammer, 2 odd screwdrivers, a crow bar and a roll of sticky tape in a falling down 6x6 shed USA = a mitre saw, a table saw with a cross cut sled, a palm router, a CNC machine, a Jointer, a seperate planer all in a custom built workshop.
@CasualBuilds 3 роки тому
😂😂
@aminsiman4128 3 роки тому
Mexico = 1 screw driver and an axe... no shed.
@aminsiman4128 3 роки тому
We work under the sun
@StephenRBlack 3 роки тому
I was going to call a technical foul for excessive use of power tools in a video with "beginner" in the title, and then I saw that you'd done it for me. So thanks.
@dooley9621 3 роки тому
@@CasualBuilds it does not say in the title for the beginner with fuck all does it. If you own no tools don't do woodwork at this level. Maybe hit a rock with your hammer outside in the sun. I tell ya what lets call it Cricket while we're at it lol.
@ngrein 3 роки тому
I don’t like when something is called a beginner project yet requires tools that most beginners would not have...
@CasualBuilds 3 роки тому
Understandable. Thank you for voicing your opinion.
@Meqanich 3 роки тому
It can go either way, like me, i have all the tools, but im still a beginner
@CasualBuilds 3 роки тому
Exactly, skill level isn't based on the tools that you own.
@giggityeffyou 3 роки тому
I agree. It's a great video for someone WITH these tools and a full shop but I'd rather see somebody use minimal tools if they're labeling it as "for beginners"
@CasualBuilds 3 роки тому
Pretty frequent theme on this vid - I'll definitely take this into consideration for the next. Just a man with a workshop and a camera, trying to create helpful content for others. Can't win 'em all.
@romanjakusz1991 11 місяців тому
After watching the video advert i was still skeptical. But when i finally downloaded the plans ukposts.infoUgkxZF0EMnrujZvqHhGkxiz559uIABJWR9TG i was very impressed. The whole plan was just as you said in the video. Thank you very much. I now have a large and valuable collection for my woodworks. This is great!
@jlsuter91 3 роки тому
Hey man, I don’t leave a lot of UKposts comments, but I gotta tell you, this is a great video. Everyone has “cutting board” videos but this one is straight forward and actually makes me feel like I can do it myself. Subscribed!
@CasualBuilds 3 роки тому
Thanks Joshua, that means a lot - glad you found this one helpful!
@earlstrohmeyer486 3 роки тому
A cutting board is one thing I had never made, but after watching your video I was inspired to try it out. You did a great job of making it look fairly simple. I just finished my first board yesterday! Thanks for the great video!
@CasualBuilds 3 роки тому
That's awesome! Thanks for watching and I hope it came out well!
@Docstantinople 3 роки тому
Coach is impressed! You did a great job and we like the video.
@FriarCadfael 3 роки тому
As I am a beginner, I think you did a great job explaining how it is really done. Thank you!
@CasualBuilds 3 роки тому
Thanks for watching!
@LutherBuilds 2 роки тому
Edge grain boards are definitely the way to go. I've made a total of 3 end grain boards for myself and the amount of sanding was painful. Plus I like the look of edge grain better. Awesome video. Keep up the great work.
@thorwaldjohanson2526 3 місяці тому
End grain definitely looks nice, but it just takes so much more maintenance and care. Plus the 'gentler on knives' thing is kinda a myth. They even tend to dull blades quicker.
@mateuszczuba9684 3 роки тому
I don't know why, but that music, when you started to apply finish, took me for a trip. I don't know whether it's because it's late and i'm tired, or whether it's the mead i've drank, but i liked it. Beatufil board, and a nicely cut video. Thank you.
@CasualBuilds 3 роки тому
Haha! Yes, I find myself watching that clip from time to time. Thanks for watching!
@bkl8804 2 роки тому
Wormwood will do that. Acid flashbacks too.
@JoseRodriguez-br6si 3 роки тому
Thanks for your tips!! Thanks for giving back to the beginners.
@tonysicily2687 3 роки тому
A great tutorial, thank you. I want to make a strip based Maidda (dough box) so this technique is perfect.
@CasualBuilds 3 роки тому
Thanks for watching - glad I could help!
@brianberger2123 2 роки тому
Great video, man. The step by steps are exactly the right amount of information without over indulging or skipping steps. Liked and subscribed. I've been wood burning and making a business out of that and am branching into "functional art". Sandwich boards, coat hangers, etc. Thanks for the video. I'll be watching more.
@CasualBuilds 2 роки тому
Thanks for watching and the sub, Brian! Wishing success with your business!
@timdingleakajacksparrow2748 3 роки тому
I made one similar at trade school 30 years ago, out of Pine and black butt , end grained , the only issue was it cupped a bit , so I ran it through the planer , and re oiled it now it’s good to go for another 30 years ⁉️🙀👍👍👍🇦🇺
@ThuyNguyen-nf9js 3 роки тому
*TopFineWoodworking. Com* is a fantastic website about wood working. I took various classes as well as finished a one year diploma in carpentry at a local tech college; this is much better than any book I worked out of during those lessons. It explains everything regarding woodworking as well as complements it with helpful photos.?
@djkalianful 3 роки тому
I really appreciate this video. While I am not a beginner woodworker, I am a beginner cutting board maker, and I feel like it’s implied that you know how to use a miter saw or table saw properly. Which is great! If I wanted a beginner table saw video I would be watching that instead! I enjoyed seeing his workflow and the tools he uses give me great ideas. Thank you so much.
@CasualBuilds 3 роки тому
Thanks for watching, glad you enjoyed!
@Ron-jd4th 4 роки тому
Beautiful Job!!! Just stumbled onto your videos for the first time, and really enjoyed this one, and one other, that I just watched back to back! I'm 54 yrs. of age, and only wish I'd have learned a WHOLE LOT MORE about Woodworking, than I have thus far! I've really, only touched on it briefly, (from Aug. 2013 - Nov. 2014), when as almost, complete novice, I was hired as a "Sander" at a Cabinet Shop, in Tacoma, WA. This shop, as I came to realize later, (even as the novice that I was), did not produce "top of the line" work, due to substandard training practices, and also, their inability to keep the maintenance of their D.A. Sanders, etc!! Anyway, as I've already inferred; I'm certain that I was never properly trained on how to use my D.A. to sand correctly, but I SURELY put forth my BEST EFFORT, to make the Cabinet Door Frames & other parts that I sanded, to look the best they could!! All this leads to a question I have. I was wondering why in the one scene, you appeared to be standing only half the cutting board at a time, instead of moving your Sander all the back and forth across it?? As I've said, I know that I was never properly trained, so I'm certain there is a very good reason for that, which I am unaware; so I am rather anxious to hear of it!! 😊 Thanks So Much!! Ron Now in Abilene, TX. 🙂
@CasualBuilds 4 роки тому
Hi Ron, thank you for checking out my video and glad you enjoyed it! To answer your question, I think it was because I had some planer snipe on one of the sides so it required some extra sanding to make things smooth on top. I usually try to go with the grain direction when sanding, but I'm usually not conscious about going from one end to the other for each pass.
@demps6919 3 роки тому
Jointer, planer, chop saw and table saw. Wow this really was for beginners with a full workshop.
@demps6919 3 роки тому
why would somone with a full workshop need to watch this??????
@demps6919 3 роки тому
oh and a cnc.
@CasualBuilds 3 роки тому
Anything else?
@demps6919 3 роки тому
@@CasualBuilds yes a cnc machine.
@paulhagen1002 2 місяці тому
you cant make anything with just your hands, you need tools brug
@ndajenkinson 3 роки тому
Good video with a great outcome. Although as a beginner, I don’t have any of those large machines.
@serheifedorov6521 3 роки тому
Since I read t.co/oLg9l5gL3F , I think nothing will ever surpass it as an outstanding woodworking book. The book consists of attractive images as well as drawings and also reader-friendly text. I consider this book a "must have" since it supplies a broad range of information on just about everything working with woodworking and does it quite well.?
@youtubecensorseverythingIsay 3 роки тому
I'm in the same predicament but I've found lots of videos on UKposts on how to circumvent a lack of big expensive shop tools, here's one on how to make a jointer jig for your tables aw ukposts.info/have/v-deo/amGmaJimrG9kkas.html There's also lots of videos on how to make a router sled if you don't have a planer. Happy woodworking 👍
@AuntyNae 3 роки тому
Thank You So Much! You just encouraged me to want to try the hubby's tools out. I've been asking for a butch block I think I can follow your directions, breaking them down into more precise DIY videos. So glad your video popped up on my Auto Play.
@CasualBuilds 3 роки тому
Thank you for watching! Good luck with the build and be sure to tag me in Instagram - would love to see the final result!
@70newlife 3 роки тому
First watch a few videos on shop safety. Then watch a few videos in how to safely operate every tool you will use. Strictly speaking this was not a video for beginners. Lots of stuff that a beginner needs to know was skipped.
@KOTEC525 3 роки тому
very informative, especially with terminology! Thank you!
@CasualBuilds 3 роки тому
Thanks for watching!
@wilhelmtaylor9863 3 роки тому
Next time make the outer 2 boards longer - prevents snipe. That engraving tool is definitely for beginners. We all have them in our garage. And remember, folks, when you wash your cutting board ALWAYS wet both sides to prevent warping.
@plethorax7127 3 роки тому
Leave the 2 outer boards longer? Like when you glue up and then run through planer?
@essextwo 2 роки тому
If your cutting board warps, you've constructed it far too thin. Warping shouldn't even be a consideration.
@kaleoscreations8069 2 роки тому
I have the same planer he uses in the video, I had terrible snipe at first until I learned that it actually has a cutter head lock built-in! Reduced my snipe to basically 0 😅
@daveklein2826 2 роки тому
if it warps you made it to thin
@arthurmomo4406 Рік тому
Lol yeeea that was hella water
@josefumi 4 роки тому
Zimri redesigned your logo in his latest video! It's really good!
@CasualBuilds 4 роки тому
Thanks for letting me know! I just checked out the video and love his redesign, especially the hammer one and pop of orange is perfect. May be making some updates soon!
@RiverHayes Рік тому
I've been researching DIY cutting board videos because I want to make a few for gifts. This is an excellent video for someone like me who's never made a cutting board before. Short and sweet. Great info. Excellent camera, audio, and editing skills, as well. Liked and subscribed. Thanks!
@Phil_Goodman 3 роки тому
those cuts are so perfect
@psf4735 3 роки тому
Sure a lot of “beginners” may not have tools like a planer, so check in with cabinet shops or sawmills. My local mill will plane anything for 20¢ a board foot - definitely worth the drive to get it done! Awesome video, thank you!
@XxBloggs 5 місяців тому
How many people have a local mill?
@janisbaduns 3 роки тому
because a begginer's got a planer, jointer and table saw :D
@CasualBuilds 3 роки тому
Lol, they could!
@joh8059 3 роки тому
Haha my point. I am kind of overwhelmed. I might go to a lower level of tutorial.
@cornelius5595 3 роки тому
Don't forget the CNC, lol
@InternetWarriorQwer 3 роки тому
Truth is it's not a beginners project because you need precise milling and even if you were using hand tools you would need a vise, some quality sharpened hand planes and clamps.
@CasualBuilds 3 роки тому
I made this video to cover the basics that a beginner would need to know about making cutting boards for the first time, the different types, how to clamp, what finish to use, etc. There are multiple ways to make a cutting board and I used the tools that I've acquired over the last 3 years. I'm still 100% a beginner woodworker, I just invested in this hobby up front. You could easily take any board and glue it together to make a cutting board without the need of a jointer or planer. Face grain boards for example, would be a good start.
@juliahelland6488 3 роки тому
Well done video! Great step by step instructions. Thanks for sharing your talent!
@CasualBuilds 3 роки тому
Thanks for watching!
@TheWeekendDIYer 4 роки тому
Looks great Tim! Thanks for sharing this beginner tutorial!
@CasualBuilds 4 роки тому
Of course, thank you for taking the time to watch!
@michaelblackwelder7534 3 роки тому
For “beginners” who have a full workshop... lol But, excellent video other than that. Great production and flow!
@ron0126 3 роки тому
Maybe it’s for experienced wood workers who are beginners at cutting boards
@eng034 3 роки тому
Quarantine Life LV.999999 : Watching how to make a cutting board..
@CasualBuilds 3 роки тому
Hahaha
@WildAcresFarms 3 роки тому
..and discovering that @casualbuilds idea of a “beginner” project requires $4,000+ worth of jointer, planer, and a (way more than contractor grade) table saw. Sorry. Nope.
@CasualBuilds 3 роки тому
If you started with pre-milled lumber, you won't need a jointer. If you don't have a planer, user a hand plane and sand more. You do not need a contractor table saw. I'm ripping boards, that can be done with any table saw.
@andrezepeda3548 3 роки тому
Super impressed when you added the mineral oil!
@CasualBuilds 3 роки тому
Thanks! You should have witnessed the behind the scenes - trying to maneuver the camera with oil all over my fingers haha
@PPMOCRG 3 роки тому
I enjoyed this video. The board came out great! Walnut is my favorite, so pretty.
@CasualBuilds 3 роки тому
Thank you, it's my favorite too!
@MagicWok 3 роки тому
"There you go! As a beginner you've now made your own cutting board for just £10,000+. Now, turn off all the equipment and never use it ever again." Btw - the video production is actually great, nice job. It's really not a beginner's video though, but it'll get more clicks labelled as that.
@CasualBuilds 3 роки тому
Thanks! Based on the comments here, I've learned that lol
@sarahcash7748 3 роки тому
@@CasualBuilds There is always whiney children in the comments that think they can cry about the tools in the video that they don't have. Don't pay them any mind as they are the remnants of the "everybody gets a trophy" group! They think you are supposed to build a nice cutting board (which is a basic project) with a circular saw, a C clamp some nails and screws and a rusty chisel! The stuff you used besides the planer are basic tools a beginner should have if they want to build something! They need to get over the fact that you have lights in your shop!
@baddawg3380 3 роки тому
@@sarahcash7748 I would agree, as a beginner myself I have most things that he has in his shop. Some just not as nice, That and room he's got way more room then me..
@KM-ws8qs 3 роки тому
@@sarahcash7748 wow, you're pissed! Sarah, the professional woodworking commando Sure
@sarahcash7748 3 роки тому
@@cooperluce8120 Ha ha haa! Nobody pissed in my cornflakes honey! It just gets old and I feel sorry for the woodworkers putting out free content and there is always some crybaby over exaggerating about the cost of tools used in a video. They whine and cry more than I do during my monthly! Hell that may have been why I went off on the b**ch in the first place Lol.
@casperscuts2627 3 роки тому
Great job, I love how it turned out. Thanks
@CasualBuilds 3 роки тому
Thanks for watching!
@dlim1984 3 роки тому
Beautiful. Currently making one now, did not know about watering the board to raise the fibers. Thanks for that!
@CasualBuilds 3 роки тому
Thanks!
@alexanderludwigthaddeusvandarc 3 роки тому
looks at Pettan chan close my ear hear the true form of death metal breathing style
@mazinga8600 2 роки тому
What does this comment has to do with how to do a cutting board?
@ChrisRussell91 3 роки тому
"For Beginners" has a really different meaning for some people lmao
@ron0126 3 роки тому
I took it as a beginner in making cutting boards, most others seemed to think it’s for beginning woodworkers.
@GrowingLittleCountryhomestead 3 роки тому
Yeah I don’t have any of these beginner tools. Lol
@daveklein2826 2 роки тому
@@GrowingLittleCountryhomestead then figure out how to do it with what you have and stop whining
@toeey1 8 місяців тому
I have a nice slab of walnut and I was going to alternate oak and walnut but I think I like the look of the all dark with alternating grain pattern instead. Thanks for the tips
@jayzay8895 2 роки тому
This is very helpful and informative. Thank you 🙏
@aqhan 3 роки тому
"Hey and welcome to woodworking basics for beginners." Proceeds to use $20.000 in equipment to make a cutting board.
@CasualBuilds 3 роки тому
It's actually, "...focused on bringing you beginner DIY and woodworking content." Close though!
@chedisLoL 3 роки тому
20,000? You can do the same thing with 200 dollars of hand tools. his planner is like 700 dollar a miter saw is like 500, a table saw can be bought for like 600 all brand new. so i dont know where you got 20,000 dollars from.
@CasualBuilds 3 роки тому
Planer was $500 brand new, you can find used for far less. I've mad cutting boards with my old job site table saw, which was like $200. And, my miter saw was free haha, my dad gave it to me. Point is, you can get these tools fairly cheap if you buy used.
@aqhan 3 роки тому
@@chedisLoL @Casual Builds - I guess sarcasm doesn't translate well on the internet. I was joking.
@wurly164 3 роки тому
Robert Nowicki you can buy second hand tools or cheaper ones, no where near 20k, I guess some people just have to complain
@lukehunter4027 3 роки тому
"Cutting Board for Beginners | Woodworking Basics" uses jointer
@saltypumpkin3533 3 роки тому
Exactly
@daveklein2826 2 роки тому
then figure out how to do it with what you have and stop whining
@FennahMakes 3 роки тому
Though it’s a simple board it’s very very beautiful! Great tips for the beginner cutting board makers!!👌 great job!
@CasualBuilds 3 роки тому
Thanks! Yes, it's a super simple board and I agree, came out looking very nice. Thanks for watching!
@htxvandal5760 3 роки тому
Thank you for the video. This was the first video of yours I have seen. I subscribed and looked forward to seeing more. I really appreciated your style and demeanor in your delivery. Great job for a beginner like me to understand and follow. Thank you again.
@CasualBuilds 3 роки тому
Thank you for watching and I'm glad you enjoyed my style - I'll be putting out more videos soon, stay tuned!
@nicholash4587 3 роки тому
"Cutting Board for beginners" Proceeds to use a: Miter Saw Table Saw Planer Jointer Router CNC Machine (optional obviously) LOL
@CasualBuilds 3 роки тому
In my mind, there's a difference between woodworkers and DIYers. I don't imagine DIYers having those tools, but a beginner woodworker on the other hand, it's reasonable.
@nicholash4587 3 роки тому
@@CasualBuilds IDK, I consider myself a beginning woodworker and I am not even close to having all that. Beginners aren't typically going to have $1-2k in tools.
@CasualBuilds 3 роки тому
I guess it comes down to people's own definition of "beginner" because I believe I am still one.
@nicholash4587 3 роки тому
@@CasualBuilds I'm not sure how I would define beginner but it probably would not include someone who does woodworking for a living.
@CasualBuilds 3 роки тому
Yea, I'd agree with that.
@untyoowan 3 роки тому
the audacity to call this beginner, homie used so many expensive tools
@chefgiovanni 3 роки тому
The final product looks nice. Before glueing try to dry your wood to 6-10% humidity. You missed some points in the gluing process. Not sure if it will hold up like my walnut cutting boards. The cost of the router, planer and CNC machines blow my mind. I use older DELTA ones, heavier and less $ . For a beginner , we should suggest buying the 1st cutting board. Maple is harder and costs less $ . Watch our videos, we use and review tons of them. Kids, never put your cutting boards in the sink, water will destroy them. Oil monthly.
@daveklein2826 2 роки тому
then figure out how to do it with what you have and stop whining
@stephenmartin9393 Рік тому
I have a similar cutting board that I have had for over 40 years. Not sure about the type of wood but it is hardwood and looks to be in great condition. I have a set of Henkel kitchen knives in a block that are super sharp and compliment my cutting board
@foos.998 3 роки тому
Great, simple video. Thanks for uploading!
@CasualBuilds 3 роки тому
Thanks for watching!
@garyfrechette8689 4 роки тому
Beautiful board! You do very nice work, both with wood and your videos. Keep up the good work.
@CasualBuilds 4 роки тому
Thanks for the kind words, Gary!
@soffiegirl1027 3 роки тому
This was so helpful; thank you!
@shaynesabala Рік тому
Wow that looks so good after you put the finish on it.
@brainxray1757 3 роки тому
Really nice vid. Definitely something to look forward to when I have the space to do this!
@CasualBuilds 3 роки тому
Thanks! Hope you're able to make some space!
@peterbonfiglio3420 3 роки тому
I’m new to woodworking and am making my first cutting boards. One for my father and one for my son. I’ve watched a lot of videos Thank you for the very informative video. It answered all my questions. The board is beautiful btw.
@keithschroeder7893 3 роки тому
Beautiful. Great teaching style.
@JooPalo 2 роки тому
Thanks so much for this video. Now that explains a lot of doubts I had.
@meghanhenderson1063 2 роки тому
I'm just beginning to get into woodwork starting with small ideas especially out of scraps and nice furniture that people throw out. I'm nearly 40 and just beginning all this and this video gives so many ideas even if I don't yet have all the tools yet thank you for this video. I just subscribed.
@CasualBuilds 2 роки тому
That's awesome - it's a fun hobby!
@johnmartinez9220 2 роки тому
Love walnut. I have some that I need to turn into a cutting board.
@sureshkumar4140 3 роки тому
U r simply amazing bro, hope u do more videos for diy begginers
@johnquezada8472 2 роки тому
That is a beautifull cutting board. My wife would love this thank you.
@davidsoutdooradventuresand6799 2 роки тому
Thanks for sharing your video.. I learned something new today... I myself have a walnut cutting board. Now I know how to take care of it thanks to you. Have a great day and stay blessed.
@CasualBuilds 2 роки тому
Thank you!
@DocGoose1980 3 роки тому
Great information! Thanks for making and sharing this video.
@CasualBuilds 3 роки тому
Thank you!
@poormomlife8585 3 роки тому
Thank u so much for this video & such in depth explanation !! 💖💖💖
@ianstriffler8160 Рік тому
Great video! I'm slowly, but surely, getting better with wood working. I like the hat too. Great brewery and I have some of their swag as well.
@illuminant1129 Рік тому
Really nice job and very clearly explained.
@GS-st9ns 3 роки тому
Very very nice. You reminded me to oil my cutting boards.
@DayTrader__ Рік тому
Love it, love it, love it!! Thanks for the upload friend! Good job!
@Nacho_Terpz 3 роки тому
Start line brewing making a strong appearance. Rock on man 🤘
@CasualBuilds 3 роки тому
Yes! One of my favorite breweries!
@Jagersdad70 3 роки тому
Thank you so much for this video! I’m a beginner as well and got a lot of information from you. Thank you again and appreciate this video! Aloha!!🤙🏾🤙🏾
@CasualBuilds 3 роки тому
Thank you so much for watching and glad you found it helpful!
@KRayxKodessA Рік тому
gorgeous board. Nice work!
@robertprice9052 4 роки тому
Great video. I build bunches of cutting boards and I use Howards conditioner. I have found it best to get a shallow tote container and put a gal or so of mineral oil in it. I lay the boards in it for about ten minutes and then stand it up in a dish rack to drain. The next day I use Howards conditioner and an electric buffer to bring out a shine. I think saturating them in oil keeps them from splitting or separating. Just a suggestion. Great board. I love walnut!
@CasualBuilds 4 роки тому
Thanks! Yeah, I've seen some vids of people dunking their cutting boards in mineral oil too - seems a lot easier than wiping on a little at a time. If I made these on a regular basis, I'd definitely incorporate your method. Haven't heard of the buffer trick yet, I bet them come out awesome. Walnut is certainly the best - thanks for watching!
@TNBushcrafter 3 роки тому
I've seen people dunk carved spoons and kuskas and leave overnight. The oil can still be coming out a year later. I personally use black walnut oil with some beeswax melted in it. The black walnut oil leaves a hardened surface after several coats. The beeswax buffs/polishes out great. Only have to watch nut oil with allergic people.
@johnny.9879 3 роки тому
Looks beautiful. Great build man!!
@CasualBuilds 3 роки тому
Thank you!
@travisratchford3454 3 роки тому
Love putting that mineral oil on at the end! So satisfying!
@CasualBuilds 3 роки тому
It sure is!
@DmitriIvanov 3 роки тому
Nice video, thanks for sharing! Cutting board turned out really cool!
@CasualBuilds 3 роки тому
Thank you!
@blackstonecap 3 роки тому
Nice with good detail on each step
@tonybenton1552 2 роки тому
Love the shop setup
@mcg5831 3 роки тому
Great tutorial, thanks.
@longdriver2 2 роки тому
Looks great! Nice job.
@mikewilliams9174 3 роки тому
Great video. Used it to plan and make my own with walnut and maple.
@CasualBuilds 3 роки тому
Nice!!
@josewenzel 4 роки тому
Dude! very nice content! great tip on the re-waxing for the cutting board, I've seen mine going a little to harsh now, so I guess I'll get some wax to bring it back to life!
@CasualBuilds 4 роки тому
Yeah! Adding that oil/wax mixture to a wooden board can definitely bring it back to life. Glad you enjoyed the video, thanks for watching!
@colewilson6305 3 роки тому
Looks great, thank you.... my husband and I are thinking about making cutting boards for family gifts for Christmas. You video is very helpful
@CasualBuilds 3 роки тому
Awesome! Be sure to tag me on Instagram when you make them - would love to see the end result!
@jasonclift7253 3 роки тому
Nicely done - thanks for the video
@Brigitte2x33 3 роки тому
Thanks for sharing this tutorial !
@CasualBuilds 3 роки тому
Thanks for watching!
@4819632011 3 роки тому
I've made some fantastic cutting boards with just a chop saw and a router with a depth jig sled for leveling.
@Rayzer2368 3 роки тому
For the people complaining about this not being for beginners, the title says "Cutting Board for Beginners," not "Woodworking for Beginners." Great video!
@CasualBuilds 3 роки тому
Thanks!
@DIYMinded 4 роки тому
Great build with lots of valuable information. This video deserves far more views. Subscribed.
@CasualBuilds 4 роки тому
Thank you!!
@lizardhollow 2 роки тому
Thank you! And by the way, you have my ideal workshop. Nice.
@nuckfuts7855 3 роки тому
Beautiful I love walnut
@tannerc21 Рік тому
Beautiful!
@ranger2316 3 роки тому
Excellent! Thank you.
@juangarcia-qn4ei 4 роки тому
Well explained and with great content, really helped me out!!! Watching from #Malinalco, #Mexico😎🇲🇽🔥
@CasualBuilds 4 роки тому
Thank you! Glad you found it helpful!
@NorthwestCraftsman 3 роки тому
Awesome videography and beautiful work! Thanks for sharing!
@CasualBuilds 3 роки тому
Thank you!
@godfatherfeederfather6350 3 роки тому
Awesome job, I wish I had all the tools needed. I only have a laser engraving machine and access to a mitter and circular saw, plus some drills amd and sanders.
@CasualBuilds 3 роки тому
Thanks! Wish I had a laser engraver, I've seen some awesome projects made with those!
@godfatherfeederfather6350 3 роки тому
I want to expand a little but I'm limited to space and what I have
@briansworld7153 3 роки тому
Thank you very much for showing us how to do it. I have subscribed to your channel. I am constantly learning. I love woodworking. Blessings!
@CasualBuilds 3 роки тому
Thank you!
@briansworld7153 3 роки тому
@@CasualBuilds you are welcome hermano!
@youssefhussein1 3 роки тому
Great learning experience
@buzzer2012 Рік тому
Nice presentation and finished product. Thanks.
@JustVoss 3 роки тому
Nice video! Have been wanting to make my own cutting board and since I only work in metal this helped a ton. Subbing.
@CasualBuilds 3 роки тому
Thanks! I'd love to get into metal working one day.
@sdbassin1143 2 роки тому
Great info. The walnut is 🔥🔥🤙
@KyokushinKichiKai Рік тому
Well done! Thank you Sir!
@cedaroakfarm8596 2 роки тому
one of the best videos on making cutting boards, BTW, music is excellent
@peterg8752 3 роки тому
This guy is a class act. Well done sir.
@CasualBuilds 3 роки тому
Thanks!
Six Eight Woodworks
Переглядів 101 тис.
Steve Ramsey - Woodworking for Mere Mortals
Переглядів 4,3 млн
Loisnake
Переглядів 833 тис.