I turned my DYSON HAIRDRYER into a JET ENGINE
Переглядів 1,552,875
Рік томуInstall Raid for Free :white_tick: IOS/ANDROID/PC: clcr.me/IntegzaRaid and get a special starter pack with an Epic champion :zap: Kellan the Shrike :zap:
Join RAID’s 4th Anniversary celebration, use the Promo Codes below to get special B-day gifts:
:gift: 4YEARSRAID (includes Legendary Skill Tomes) - Available for ALL users
:gift: FIRESTARTER (includes an Epic champion Ultimate Galek) - Available for New users
:bulb: Superb tip for New players: get Kellan the Shrike using the link above and enter the promo code FIRESTARTER to grab Ultimate Galek and gain two topnotch champions at once
:bulb: Note that only 1 Promo code can be used within 24 hours
Metal 3D Printing Company
K3D :k3d.nl/en/
Thermal Camera
AGM G2 GUARDIAN:www.agmmobile.com/products/ag...
Printer I used:www.prusa3d.com/product/origi...
Support me on Patreon: / integza
Paypal me:paypal.me/jgomes1992?locale.x...
Discord: / discord
Reddit: / integza
#dyson #engine #3dprinting
@integza Рік тому
A big thanks to Bob and K3D for the Metal Printed parts! If you need something printed in Metal they are your guys! (K3D Website:k3d.nl/en/)
@magicblockcraft Рік тому
have been thinking about 3d printing my rocket in metal so..
@strikex9543 Рік тому
you finally uploaded 😱😱
@ddoherty5956 Рік тому
A Brazilian dollar 😂 follicular dehydrator, you are now a fully qualified mad scientist. Love your work Joal👍🇬🇧
@ambulocetusnatans Рік тому
Why do you have a picture of John Lennon next to the picture of Tesla?
@user-zq9xh4rc3c Рік тому
As we age together, i get the weird feeling that you want to make content for children and not your viewers. whats up with that?
@deathpyre Рік тому
You should probably keep the air running after you turn off the fuel. To cool the engine, make sure heat doesn't spread where it normally doesn't because of cooling while running, and to expel/burn any lingering fuel
@serronserron1320 Рік тому
DeSantis
@Nothing-bh8cc 10 місяців тому
he didnt turn it off it broke
@cameraaction1 Рік тому
Video idea: use one of your rocket engines to send a tomato to space
@mr.talalai3416 Рік тому
The camera would be better
@upul9677 Рік тому
I think everyone would love to see his engines in action
@Kuboszpl Рік тому
@lShowSрееd shorts 🅥 broooooo i dont expect that
@antonliakhovitch8306 11 місяців тому
Does he make rocket engines too?
@guoxiangmo9905 10 місяців тому
and explode the tomato😂😂😂
@wisppandemonium8106 Рік тому
This feels like a very effective hair drier. Also an effective hair remover.
@puffy_btw Рік тому
Also evective head skin removal tool
@BrianPh Рік тому
Also an effective head* remover
@ralanham76 Рік тому
10 times better than Dyson 😜
@puffy_btw Рік тому
@@ralanham76 at least 15 times
@ralanham76 Рік тому
@@puffy_btw they should put these in the washrooms to dry your hands 😜
@buddysadventuregame1255 9 місяців тому
There are 2 things you should expect clicking on an Integza video: 1 - Tomato's burning alive 2 - Completely unrelated sponsors
@LMF1716 Рік тому
I feel like this is the beginning of a 'turning regular objects into jet engines' series. Tomatoes are disgusting !
@shadow1181 Рік тому
Fr... and i LOVE IT
@_joapa Рік тому
I am all for it 😂😂😂😂
@nutzeeer Рік тому
next up: a toaster. for the extra cancer in your toast!
@kacsavagyok Рік тому
This needs to happen
@bruktilahun232 Рік тому
I love your work i have been making my own jet engine and a rocket engine too tnx your videos really helped
@ayyuhhshh2169 Рік тому
❤ from India. You could maybe trying making Tesla's plane which was never built.. I haven't seen any models of it around. It would be really interesting to see if Tesla's plane actually would have worked or not.. OR How about a SOLAR PLANE? like a plane with solar panels on its wings so that while it flies it also charges up and then do a fly all day challenge. I've been watching Integza's videos for 3 years now. Very inspiring for students like me. Tomatoes are disgusting! 🔪🍅
@ElixZyre-tu8lc Рік тому
Man is going to solve whole worlds electricity problem lol
@imakepath-vl1gr Рік тому
Fr dude what if airlines started using this. Average power produced by solar panels is 2.25kWh. Avg area of planes wings are around 110 m-sq and avg flight duration 2 hr. So total of 495 kW. That's a good amount of electricity dude. And also thats on 1 single fly.. planes at airports normally stay in sunlight
@Ash-mf2vx Рік тому
@@imakepath-vl1gr haha nice math
@mehere6003 Рік тому
@@imakepath-vl1gr lol use that in exams
@FirstLast-xn3zv Рік тому
I've seen a video with this concept. Hope this concept gets some attention and scaled up
@QQ-rx9xp 9 місяців тому
Testing a homemade jet-engine in your workshop is very, very, brave of you. I’m sure you know what you’re doing, but I wouldn’t ever dare to. Awesome video!
@AHHHHHHHH21 6 місяців тому
He's made plenty of rocket and jet engines in his workshop before
@michael.forkert 4 місяці тому
_Why don’t you incinerate your Fancy Bozo Gear with those rocket engines Bob printed for you?_ 😂
@daamayzn Рік тому
With the metal 3d printing, maybe you can revisit some of the other projects that were limited by the sintering process! Aerospike, and others jammed into an epic episode!
@THEOGGUNSHOW Рік тому
Dyson needs to sponsor you. I can see the execs trying to decipher why their ionic bladeless hairdryers are suddenly hopping off shelves.
@Kubulek17 4 дні тому
when these first came out they were sold out for months, was near impossible getting your hands on one
@thefurry607 Рік тому
The tolerance on that is just like turbochargers on cars. Such tight tolerances and yet they work near perfect every time never ceases to amaze me, and they make fun flutter noises :3
@jraboi01 9 місяців тому
I have NEVER come to a full video from a short before but you got me. Subbed. Love the content
@Thefourthalbum Рік тому
It would be really cool if you collaborated with Tom Stanton or Peter Sripol to make a plane out of one of your engines!
@Triangle1234 Рік тому
i reported the scammer 😄 (not you @Sam Charmichael, in case you were wondering)
@leonardowilian4244 Рік тому
He's dangerously close to making a plane I'm scared, I'm impressed, I'm happy that your channel is doing so well and I followed your rising into a channel that I hope soon will have 1 million subs algo, Hug's from Brazil to all Lusitanian friends
@Not-Only-Reaper-Tutorials 8 місяців тому
The 3D Printed object was also tested. And the result is astonishing. Thanks for the demo
@marlo8867 9 місяців тому
That 3d printing technology is absolutely amazing.
@SRKRacingTeam Рік тому
I get the feeling you should try turning a Dyson vacuum cleaner into a jet engine, when I see what you're doing with that little hairdryer. Hopefully you will someday.
@Greg-yu4ij Рік тому
Imagine an afterburning vacuum cleaner
@KarmaCadet Рік тому
You should be sponsored by Dyson for this one. Jet quality turbine in a hairdryer is pretty intense. Also, your love of fire is inspiring!
@StealthTheUnknown Рік тому
Except there’s no turbine, just a compressor. I’m waiting for integza to actually add a turbine. Integza, add a turbine.
@lightlord299 Рік тому
@@StealthTheUnknown btw the above msg is fake ok
@Triangle1234 Рік тому
Nah bro dyson has agents going after him lol
@timehunter9467 Рік тому
Have you seen their vacuum cleaners’ blade design? It’s like a turbocharger with its shaping.
@matuopm Рік тому
3d metal printing is so amazing. i love how you can develop structures that would not be possible with cnc engineering
@crunchykarsten8765 9 місяців тому
Integza putting plastic parts in the direct stream of hot air from a jet engine is peak engineering
@DS-jl1mf Рік тому
Fun fact- my dad was a chairman on board that had a $10 million deal with Dyson to make these hair dryers. I’m glad to see they are being put to good use 😊
@nemorururur Рік тому
nobody asked bozo
@gurgleblaster2282 Рік тому
Fun fact deez nutz
@thestopmotionidiot8839 Рік тому
@@gurgleblaster2282 you have just been banned from the micky mouse club house for inappropriate talk
@collectsteve8509 Рік тому
who asked you?
@DS-jl1mf Рік тому
@@collectsteve8509 just thought it was funny that’s all
@tomarmstrong6594 Рік тому
Honestly as a machinist I cringe at how you do some things, but I love the ingenuity and effort, you a ace. Love the channel
@dagurbjornbenediktsson8864 Рік тому
Well, aint that the beauty of it
@johnbarron4843 Рік тому
Yeah…just a hobbyist who doesn’t know anything.
@bryanbeck2144 Рік тому
He's approaching things the same way most inventions were stumbled unto, honestly. The fact that he seems to be skimming through the absolute need to knows and skipping the nuances of the trades involved when executing his research and experiments is what bothers you, I think. He also looks pretty young, I'd guess he decided to chase his dream rather than study it for X years before getting to actually work on what he loves. I admire his passionate wreckless abandon.
@communitycollegegenius9684 Рік тому
It's the way we should ALL learn. Driving, Nursing, Building bridges. Just do what you think looks right to you.
@trashtrash2169 Рік тому
Please let that be a joke. We should learn properly.
@Wrellothere53904 Рік тому
Super stoaked to see your collaboration with tes tur!!! Congrats 👏
@MKMT3481 Рік тому
I have a weird project idea that I'd like to see.Use a EDF and a electrical resistor(the type used in heaters) to see if thrust can be increased.Maybe try to build a cowling to contain the parts and test the thrust of the engine
@MakotoKamui Рік тому
Bob sounds amazing. We all need a Bob like that in our lives, especially if they come with access to toys like those!
@bobvanlochem5593 Рік тому
😂
@MarkusRessel Рік тому
6:30 when you hit the print with a hammer instantly made my brain transform the part from a "shiny silver plastic" into actual metal. Such a small detail in the video, but huge impact! :D
@williamcox2025 11 місяців тому
Since you've always used a 3d printer I could never try anything or replicate, and couldn't seem to find the right parts either. This version useing the blow-dryer is awesome!
@williamcox2025 11 місяців тому
Oi guys there's more then one mustache tomato!
@Handskemager 9 місяців тому
Actually WAY better built than i thought
@viduranga924 Рік тому
Hi Integza, I propose that you are able to create a Ramjet engine. The Ramjet engines are required initial high flow speed to start the engine. I propose that you can use that Hairdryer motor and compressor to give initial flowrate. You can create hybrid RC plane also using that ramjet. good luck
@Khoolhwhip Рік тому
arent ram jets engine only aplicable at mach speeds?
@viduranga924 Рік тому
@@Khoolhwhip yes, you are right. After your comment I did small research on that. All experiments are success around considerable high mach. Tx
@pietronegretto Рік тому
@@viduranga924 yes, you need to go supersonic
@polishwhite2282 Рік тому
em, ramjet you say, xDDDDDDDDDDDD
@viduranga924 Рік тому
@@pietronegretto I saw some engine work at subsonic speed too.
@DaGuppy Рік тому
You should continue testing the metal aerospike nozzles. Im very exited to see how they perform
@pfipcompaq 9 місяців тому
Probably the best Portuguese youtuber ever. Creating funny but at the same time smart content.
@japudjuha Рік тому
Love your channel Integza, have missed you on YT!!
@petrnovak531 Рік тому
Video idea: Build vacuum cleaner with Jet engine made from Dyson hairdryer 😀 Tomatoes are disgusting!
@syedhossain429 Рік тому
Did you get your prize I haven't got mine although I have paid for shipping
@ohm.3768 Рік тому
@@syedhossain429 this is fake it's a big scam Integza won't officially promote telegram chat and he may have personally msgd you. You should not pay that brother
@lollo4604 Рік тому
do not pay, is all fake stuff
@integza Рік тому
Congratulations! You just won a Metal 3D printed Integza Whistle! Send me your info (Name, Address, Zip Code, Phone Number) to integza@gmail.com!
@stanleykomonce8302 Рік тому
That shit is fake right? i got one too ....and i just got a call but i did not pick up
@Rainyjax Рік тому
To keep it from slowly burning itself apart, you should first turn off the heat and then let the fan cool it off before turning it off entirely. That piece of plastic holding the glowing hot metal onto that stick may fail in a rather unpleasant way if you're not careful.
@MCMonsterbuilder 3 місяці тому
This guy sees a regular household item and is like "I'm gonna make a jet engine out of this" and I'm all for it.
@1Chitus Рік тому
Very nice! We really like the content you are making and the progress you have made! Keep up the good work!
@M.4.R.V. Рік тому
I‘d love to see you build a Zsélyi gas turbine, or multi chamber resonator turbine. It‘s essentially a spinning pulse jet engine, which was abandoned due to uncontrollable speeds. So yeah, would be interesting xD The engine existed, however I couldn‘t find any documentation about it other than a description of function and drawing on Quora. Still, would be extremely interesting to build this forgotten engine. Edit: I found an antique book published in 1913 by Zsélyi featuring this turbine!
@unaussprechbarername618 Рік тому
Uncontrollable speeds sound like the right thing for Joel to try! ;)
@NikitaOsito Рік тому
Are there any other names for it? I couldn't find anything about it, which makes it way more interesting. Could you share the title of the Quora page?
@M.4.R.V. Рік тому
@@NikitaOsito I was trying to find other names but couldn't find any. The Quora thread was titled: "What is the most unique jet engine you know of?" and this engine was commented by Steve Young, which drew my attention to this mysterious engine.
@M.4.R.V. Рік тому
@@NikitaOsito I have extracted some information from an hungarian pdf. Zsélyi supposedly released his work in 1913. The book was translated to German, good thing I speak German lol. It's called "Die Gas-Turbine" by Aladar Zselyi. Might have to take a look into it
@BenKDesigns Рік тому
Future video theme: Now that you can do metal parts, I'd suggest revisiting some of your older ideas that would probably have worked if the nozzles/bodies whatever parts you made out of plastic or ceramic hadn't failed. You could go a step further, and combine several different design elements from previous failed tests into one insane rocket, but again, using metal parts this time, OR test multiple past designs made in metal and see which is the winner.
@HicSvntDracones Рік тому
Doing metal parts and "affording" metal parts are two very different things
@LtdJorge Рік тому
@@HicSvntDraconesRaid backs it up
@HicSvntDracones Рік тому
@@LtdJorge Just because you "can" afford something doesn't mean you should. and only getting about $5k per Raid sponsored video, depending where you are, $2k in Russia up to $10k in the US. Unless 3d printing prices have dropped significantly in the last 3 years, he would be looking at using an entire sponsorship to just print enough parts for one experiment.. You design and test as CHEAP as possible, once you have a definitely working prototype, then you go to metal.
@BenKDesigns Рік тому
@@HicSvntDracones But if he went with my idea and rebuilt some older projects that failed due to "not metal", then the prototyping process has already been done...
@adrianhernandez7197 Рік тому
Video series idea: it is time to start doing cooling projects, since it is pretty much evident you´ve had temperature/melting issues through time lol. Lets start with a sink cooled turbine that also works as a mocha coffee pot, cause you know, coffee is great, sensible to latent heat dissipators are more efficient than only sensible ones and because why not. Tip, copper heat pipes have a 40-100kW/mK effective thermal conductivity, perfect for transporting heat under quick and big temperature deltas between components and ambient temperature. Also, if you dont transport heat through enough pipes, once they exceed operating temperature, they explode, and things bursting are great for content.
@cartercordingley6062 Рік тому
Just got my first 3d printer. Can't wait to start printing my own designs
@beez1598 Рік тому
Joel, it’s been a joy watching your skills and abilities grow over the years.
@bryanbeck2144 Рік тому
Agreed. Watching this, I couldn't help but think of all the previous melted attempts. His determination is admirable.
@timedstorm Рік тому
Integza is really great. I wish I could see him make a real rocket fly🚀
@MrJoegotbored Рік тому
Love watching you step up your game in every video. I remember seeing you try it your own metal sintering with the aerospike in the furnace. Now you've got the big boys making you even fancier toys!!
@umomgay5811 Рік тому
i love how you progressively got better at building jet engines
@iskendergokce1950 Рік тому
If you have enough budget you can try to print the metals by inconel alloy and coat the hot surfaces with yttria stabilized zirconium oxide. You can be sure it lasts so much longer.
@quadronaut Рік тому
First off I wanna say that I absolutely love your channel and science mixed with comedy is so amazing :) I feel like a cool idea would be making a super powerful flashlight (that could melt tomatoes)!!!
@warheadod5361 Рік тому
One idea is that you could use a high bypass turbofan design, it is what is used in the GE9_ series of jet engines and seems somewhat simple to design, there are in fact a lot of fans to pump O2 and fuel. It would have to be printed in metal as I can imagine it would produce a lot of heat. Then we could see the ultra satisfying video of them cleaning you parts again as well!
@dwilliam16 Рік тому
It would be interesting to see you revisit some of your earlier projects (like the Tesla turbine boat) and apply what you have learned in CAD design, or maybe redesign it for metal printing. That was one of my favorites.
@lollo4604 Рік тому
do not believe in the price, they made you send money to a guy in lithuania and pretend that the pack is been distrained
@theomgkiller Рік тому
First time viewer, found you on Facebook. But damn that's some skill you have! And very well explained!
@emmanueltorres182 Рік тому
Hey Integza, have you considered using ceramic slurry, and wax-like resin to make your 3D-printed parts into metal? I am working on doing something similar for aluminum castings using suspenda slurry and I would gladly share my knowledge with you if you'd like.
@abelzsok7457 Рік тому
Joel check out the wet-heater type engines. It was used to propel torpedoes in WW2. It is halfway between internal combustion and steam propulsion. I think it would make a great theme for a video.
@andy70d35 Рік тому
Amazing, this man is a genius, can't wait to see the full jet engine, now if it could be attached to a go-kart imagine the speed it could go. 👍 great channel.
@mr.bakaizer9789 10 місяців тому
So many rocket engine concepts when you going lunch model rockets with those
@ggigginoo2495 Рік тому
I would love to see you building a delaval rocket nozzle with the metal printed parts!
@loukmannavicenna8982 Рік тому
I could not help but notice that you were using your tripod to hold the tomatoes in place to roast them ,but you can levitate your enemy tomatoes in the flame exaust using bernaulli principle to create pressure differences in the flame, which could cause the tomatoes to float in flame and roasting them without holding the tomatoes ,you could also experiment with other objects. I think this would be a great video idea, testing wheather we can levitate tomatoes on some sort of a jet engine
@robotboi763 Рік тому
Omg yes, that's a thrilling idea
@jmadera_6 Рік тому
No way he's getting enough pressure to lift a tomato
@creepboyxm3818 Рік тому
I would love to see you put an engine like this in a model fighter jet frame and see how fast you can make it go.
@glavatazelva 9 місяців тому
you bro are a mad scientist, congratulations!
@blackspec1855 8 місяців тому
Fan: exist Integza: You are cool, but can you jet?
@nikoheinz1213 Рік тому
video idea: use the airflow from this jet engine to power something even bigger in the way rocketengines do for their propellant tanks
@dalekslayer777 Рік тому
Video Idea: adding jet engines to your car and seeing if you can get a measurable increase in MPG and possibly calculate thrust that way (least effective way to measure thrust but would be cool to see). Love your videos and always happy to see another come up in my feed 😁
@edwardcunningham6315 Рік тому
Another great video ❤ What size (diameter) would it be if you added a single (or multi) stage couling around the outside. A few compression chambers located at the fulcrum of the engine could increase exhaust (and help temps) and it should give you a vacuum (to an extent) up front😊. Reason I mentioned "size" was for twins with counter-rotations😁👍❤️
@aaronb8698 Рік тому
You should put all of your jets on a sliding track hooked to Newton force spring and a temperature gauge to record stats. To see if your getting good or bad results with different designs.
@super_burk Рік тому
This is fantastic! You transformed the most expensive high end hairdryer money can buy into the most budget jet engine to date! 😂😂😂
@foximacentauri7891 Рік тому
Shows how big the gap is between hair dryers and jet engines.
@marcoscoma1647 Рік тому
It would be cool to see you try and fit an aero spike nozzle on that jet engine!
@mckinleygarcia9828 9 місяців тому
Never seen your videos before and just had to say: you’re the fucking best, couldn’t look away for one second and I’ve got 1,000,000 things to do before Friday. Keep up the great work!!
@danielschneider1663 9 місяців тому
You'd probably like AvE. He tears things down and knows his stuff! He took one of these apart and broke down every aspect of it
@charlesmartin1972 Рік тому
8:46 gives me the ultimate idea for a future video; applying different assembly techniques to find out the most precise load cell you can build at home
@harshitshukla5474 Рік тому
Future Video Idea- You can make a toroidal blade jet engine we all know that toroidal blades are much more efficient than conventional blades and can be used both as a propeller and impeller so it's see if that works Bonus Idea- A magnus effect based propeller and jet engine from that you can use many propellers around the engine that will force more air into the combustion chamber without creating any hindrance in both the ideas you can feed more air in the combustion chamber without much mess, I hope that helps because I also like THRUST, and I hate TOMATOES as well they're disgusting wish you a great success in these future project, I love your videos, keep doing it, you inspire me a lot and I hope I can also make things like you, lots of love
@alexandercruz6264 Рік тому
damn it i was about to make this same suggestion lol
@roderikprins Рік тому
What a cool project! I might have a nice idea for a next project. Cars all have windshield wipers, but those things don't look good. Can you think of something that prevents water on the window. Maybe with high compres air...
@stufromoz8164 8 місяців тому
Everyone needs a friend named Bob.
@withers91 Рік тому
3:10 "they cost a Brazilian dollars" 😂
@marcusvale Рік тому
what does that mean?
@withers91 Рік тому
@@marcusvale about $ 0.20 US
@heyspookyboogie644 Рік тому
I always thought it was cool how much you managed to accomplish with just plastic. Would love to see more stuff that’s along the lines of “what?! You can’t make a (thing) out of plastic!” Like the jets but not a jet. 😂
@keiko2502 Рік тому
Theme for a future video idea…following on from aero concepts in this video where the Venturi effect is used to multiply the air flow (I think that’s right) and given your love of 3D printing, could you design a 3D printer extruded/part cooler housing to take advantage of this principle?
@Hydrosized Рік тому
I love high voltage ark-flash and ground fault testing videos for their visuals. They just need a personality injection. Let’s see it!
@beany7245 Рік тому
I've been seeing videos about ionic plasma thrusters, which is a fairly new technology. I think it would be cool to see a larger scale model of one of these, with a little bit of your own spunk included.
@1991USsoldier Рік тому
Hey what about creating a small hand held jet engine you can use to toast sandwiches? Just because it's an absolutely insane idea and it seems like something you would get a lot of enjoyment out of!
@user-yd8vc9hg8q Рік тому
this super jet engine is awesome and i think that your the beginner of this leap
@neiladdison3458 9 місяців тому
Try putting in a small pipe after the tesla valve that can be blocked off. This can be used to start the engine before being blocked once it gets going.
@JasonMisterDude Рік тому
We need a tomato shaped jet engine next.
@nathanielhale5726 Рік тому
It looked like the solder on your fuel manifold melted at the end, you should have a model printed that has a fuel injection manifold built into the inside of the engine with one external inlet that you can hook a fuel supply to. Unless its unsafe with the internal temperatures.
@OffiicialSteff Рік тому
I would absolutely try to see you make a metal turbo-prop engine! As far as i know its not been done on youtube.
@AlexKall Рік тому
I just love your channel because when I forget your channel name, and I will as I have a terrible memory, I can just google for "UKpostsr who hates tomatoes" and I come here. Don't have that lifeline on other channels! That and it's a brilliant channel!
@nasacraft2526 Рік тому
You should make a firework with projects you've done in past videos (3d printed fuel, metal/plastic filament, etc.), and yes, tomatoes are digusting.
@eliasbucher6218 Рік тому
I would love to see you built a rotating detonation engine. That would be very cool!
@DanielColson Рік тому
He did: ukposts.info/have/v-deo/noJ-gYmwepmFpX0.html
@TheSkytherMod Рік тому
Your mother or sister would have loved that hair-dryer, I could only imagine the look on their faces when they saw what you did to it ahaha😂. Suggestion: I'd like to see you make a waste oil burner of some sort, whether it's a blowtorch to melt metal (or tomatoes 😈) or you try to power one of these jets with it. I'm thinking used fryer oil and/or a mix of diesel and used car oil.
@chubsythedog2325 Рік тому
i actually love that idea, maybe try to make a foundry furnace thing
@TheSkytherMod Рік тому
@@chubsythedog2325 Yeah, can do something similar to what Grant Thompson did with the sand and plaster in a metal bucket.
@302redirect Рік тому
@@chubsythedog2325 Foundry added to vocabulary list
@lukearts2954 Рік тому
ever heard of PCBs?
@urgaynknowit 6 місяців тому
“Brazilian dollars” my favorite quote from you yet.
@WT0708 Рік тому
jet powered drift trike would super cool! Very nice video
@MishuuuTheWah 8 місяців тому
dyson jet powered venturi cooler seems super impractical but fun.
@nikoheinz1213 Рік тому
video idea: combine this with the afterburner project
@ajaxsakaraplayz4070 9 місяців тому
Dude the fact that he managed to make it have afterburners is mine blowing 9:36
@riccardogarzelli Рік тому
you should 3D print a reproduction of the Egyptian Shist disk in Cairo Museum and try if it works like an impeller. Maybe even stack a few of those to make some kind of Archimedean screw for water pumping uphill
@DemeDemetre Рік тому
You should make a rotary engine of some sort!
@Ace2789able Рік тому
idea for a video: metal printed compressed air engine or maybe even a ram jet? Also interesting video, that metal printing arm must cost a large sum, but would be so much fun to play with. :D
@mat2941 Рік тому
I wanted someone to do this so bad! I always thought Dyson digital motors would be good to make jet engines 😬 although i was hoping for an in-line build rather than your usual one 😊
@gamesfm7309 Рік тому
It would be a very interesting project if you use this jet engine to power a fixed wing drone, if you get the aerodynamics and conditions right you might do a supersonic fixed wing drone!
@thisolesignguy2733 Рік тому
This was awesome! Since you figured out how to get 3D printed metal parts, why not do a 3D printed underwater turbine? Something like the Russian K-222 water turbine sub.
@xmysef4920 Рік тому
Guys ignore the message above, it’s a scam bot impersonating as integza
@Some_Beach Рік тому
1:40 the eating element
@enginediy Рік тому
Amazing jet engine
@mikelarrutiromero9430 10 місяців тому
I've already made a suggestion but now I have another one. You could be the first person that I know of, to build a fully (or mostly) 3d printed gas blowback airsoft gun! They are not that complex once you know how they work, I've already fully disassembled 4 of them for deep cleaning.
@petikeazisten6301 Рік тому
Video idea: Make a jet engine with the bladeless fan you have created, that would blow away all the tomatoes for sure😉.
Супер Стас
Переглядів 4,8 млн
ZAXID.NET
Переглядів 582 тис.
Why is Inspecting Staybolts Crucial - Steam has power - Explosion risks are Real! Verification - YES
Carson & Colorado Railway
Переглядів 134
Warped Perception
Переглядів 9 млн
SANU4YOU
Переглядів 2,2 млн
Infinity Circus
Переглядів 2,6 млн