Installing a Three Phase Distribution Board (Part 1 of 2) Electricians 3 Phase DB Installation

День тому

Installing a Three Phase Distribution Board (Part 1 of 2) Electricians 3 Phase DB Installation
✅ Check Out All Our Favourite Tools Here 👇
➤ www.amazon.co.uk/shop/artisan...
-----Electricians Business Course-----
📩 Sign Up To My Electricians Business Course Here And Get The First 4 Lessons Free 👇
➤ course.electriciansbusinessco...
🔔 Subscribe to TOOLS4SPARKS UKposts Channel 👇
I Also Have A Dedicated UKposts Channel About Tools:
➤ / tools4sparks
-----TESLA REFERRAL CODE-----
🚀 You Can Use My Referral Link To Get 1,000 Free Supercharger Miles On A New Tesla 👇
➤ ts.la/andrew24855
✅ MY ENERGY PROVIDER:
Bulb - Use this referral link and we will both receive £50! www.bulb.me/andrew8530
CHECKATRADE:
Get a £50 voucher when you join Checkatrade quoting our Member ID: 505219
join.checkatrade.com/friend
FREE STOCK SHARE worth up to £⁠100:
Create a Trading 212 Invest account using this link www.trading212.com/invite/FAtr and we both get a free share!
AMAZON DEALS:
Amazon Prime FREE for 30 Days:
www.amazon.co.uk/tryprimefree?...
FREE 30 day Membership to Amazon Prime Video is available here:
www.amazon.co.uk/gp/video/prim...
FREE Amazon Music UNLIMITED for 30 days here:
www.amazon.co.uk/gp/dmusic/pro...
FREE 30 Days Audible subscription here:
www.amazon.co.uk/Audible-Membe...
🏷️ DISCOUNT BUSINESS SUPPLIES 👇
➤ www.amazon.co.uk/tryAB/?tag=a...
📱 Don't Forget to Follow Social Media, FOLLOW US on Your Favourite Social Networks 📱
📸 Artisan Electrics Instagram Account 👇
➤ / artisanelectrics
🐦 Artisan Electrics Twitter Account 👇
➤ / artelectrics
📓 Artisan Electrics Facebook Account 👇
➤ / artisanelectrics
This video is for entertainment purposes only please do not attempt to copy or recreate it. Do so at your own risk.
#Electrician #ThreePhaseDB #SparksLife #3Phase

КОМЕНТАРІ: 200

@SpiritSwarm 3 роки тому

Very good video I like how you go through everything and even showing the use of the regs 👏

@artisanelectrics 3 роки тому

Glad it was helpful!

@jeanclaude2794 4 роки тому

thanks for the video. much appreciated. lots of info to take in!

@artisanelectrics 4 роки тому

Thanks!

@mrbeckles77 4 роки тому

Great video Jordan, but I have to say the music is doing my head in. Not sure if it's too loud...

@artisanelectrics 4 роки тому

Ok thanks will take that on board.

@JPElectric 4 роки тому

Enjoyed that, some good info. Looking forward to part 2. Not many UK 3 phase videos on youtube

@artisanelectrics 4 роки тому

Thanks!

@stuartcraigon2003 4 роки тому

No exactly, very very few people do commercial and industrial jobs and do videos on them.

@artisanelectrics 4 роки тому

Yeah it’s true!

@stuartcraigon2003 4 роки тому

@@artisanelectrics I think its probably by in large because the majority of commercial and industrial jobs are done by the really big contractors such as NG Bailey and SPIE so the smaller local guys like you rarely get those types of calls or have no interest in them because domestic customers are more widely available and easier to do business with.

@NicksEnprome345 2 роки тому

I always fit the base of the gland to the enclosure first, that way you can get a really good tight grip on the lock nut and gland, then feed the cable through the gland and screw on the 2nd part of the gland tightening the armoured to the gland and also because the first part of the gland is tight it won’t spin when tightening the second part. It’s a good method when doing multiple glands as you can fit the glands to the gland plate before installing to the enclosure

@oscarridout-magill4741 3 роки тому

Cheers mate, really helpful

@stephengreen909 4 роки тому

Great video yet again. And that cable splicer looks a great tool. Must get one.. 🌟🌟🌟🌟🌟

@artisanelectrics 4 роки тому

Thanks a lot!

@stephengreen909 4 роки тому

@@artisanelectrics Jordan... Where did you purchase that cable cutter..??

@artisanelectrics 4 роки тому

Check the Links in the description of the video

@wantagetreat 3 роки тому

great choice on the backing music!

@artisanelectrics 3 роки тому

Thanks!

@alexgreenman2289 4 роки тому

I like how you remembered about the one click from that lady on a previous video. That's how I found out and I remember that every time.

@artisanelectrics 4 роки тому

Thanks! 😁

@TooOldToScrum 3 роки тому

Surely more than one click makes no difference as the torque setting is not cumulative. If it it clicks at 2.4 nm once the second time is still 2.4.

@alexgreenman2289 3 роки тому

@@TooOldToScrum it's not the torque that will change, it's the affect the clicks have on the torque screwdriver. Keep clicking the screwdriver at the set torque setting will slacken the insides such as the spring.

@TooOldToScrum 3 роки тому

@@alexgreenman2289 Got it.

@lammy2304 3 роки тому

So if I have a panel with a 100 terminations the torque setting will be different at the last one ? or my torque screwdriver will need calibrating/chucking in the bin after ???? 🤷‍♂️🤷‍♂️

@donnierobertson3088 4 роки тому

Great job again like always

@artisanelectrics 4 роки тому

Thanks!

@richard-riku 4 роки тому

It's nice to see something about three phase. I live in Finland and all detached houses and most new flats have a three phase supply. My cooker and sauna heater are both fed with three phases. There is no neutral wire coming to the house though, only the three phases - that took some understanding.

@artisanelectrics 4 роки тому

Yeah that’s quite unusual here! Thanks for sharing!

@torstenbeutinger3093 2 роки тому

@Richard Bevan that's a TT net... Earthing must done by your house

@JasperJanssen 2 роки тому

@@torstenbeutinger3093 protective earth is one thing, but no neutral? In residential applications it’s entirely possible for the phases to be wildly out of balance, which means that a significant current would be flowing into your earthing pen. Like dozens of amps.

@martinbateman2467 Рік тому

it is common in Belgium, Malaysia, Finland and Norway as far as I am aware. It works out at 127V per phase wrt ground, it is the same that I have for the time being, but am waiting to be upgrade to N3x400V

@rogerbean393 4 роки тому

Best kit in the box is my sturdy pencil sharpener !!! Always use 4 pole isolators, especially in TT installs must isolate neutral.

@artisanelectrics 4 роки тому

Good job! What kind of pencils do you use?

@rogerbean393 4 роки тому

Staedtler HB nothing fancy light enough to stick behind my ear !

@richardwash6678 4 роки тому

Great video Jordan. 👍

@artisanelectrics 4 роки тому

Thanks!

@craigspacie7048 4 роки тому

Lv ur Vida mate help a lot 👍

@artisanelectrics 4 роки тому

Thanks!

@callmedaddy1081 3 роки тому

Thanks for this video

@artisanelectrics 3 роки тому

Most welcome

@chris-hu7tm 2 роки тому

perfect, Im currently trying to fix the electricity in my newly built house

@willmurphy6663 2 роки тому

Hi John ward did this dB, that is the only reason I know the neutral incomer has an adapter piece to take the incoming switch

@terryselectricalservices8234 4 роки тому

Nice job mate

@artisanelectrics 4 роки тому

Thanks!

@billythespark7477 4 роки тому

Nice neat work. Those earth nuts are a god send 👌🏼 Keep the great videos coming, I’m learning a lot from them.

@artisanelectrics 4 роки тому

Thanks Billy! Great to hear you’re enjoying the videos! Don’t forget to share with someone else who might enjoy them!

@UserName-yk7om 3 роки тому

Jordan is the right one for the 😏 current job😁

@MultiOutdoorman 2 роки тому

Isn't there a mini busbar in the kit to address the neutral / 4 pole issue ? "John Ward" did one of the same brand, but used it as a single pole and neutral Isolator, with 2 blanks for L2 and L

@antonios4926 4 роки тому

Thanks for the videos Jordan. Are ELCB breakers better for 3 phase boards than RCBO breakers

@artisanelectrics 4 роки тому

ELCB stands for Earth Leakage Circuit Breaker which is what they are called in the USA. Here in the UK we call them RCD residual current device. RCBO is different as it contains both the functions of an RCD/ELCB and an MCB or miniature circuit breaker in other words it gives both over current protection and earth leakage protection.

@antonios4926 4 роки тому

@@artisanelectrics Thanks for your reply. A lot of You tubers do not reply to questions.

@acelectricalsecurity 4 роки тому

i think i would have been tempted to replace that existing board with a larger one, it just gets a bit cluttered, and ideally incorporated the existing single phase board circuits in there, i know its probably down to their budget and how long you can have the power off before they start to moan. Also i do get a bit frustrated seeing people going on about torque settings, several years ago no body give a crap, now its a big thing, if its so important why not torque down socket terminals or switch terminals, rather than only breakers and isolators, they are all electrical connections so they should all be treated the same.

@artisanelectrics 4 роки тому

Good comments, there was no room to install a larger board otherwise I would have done that. Torque settings are important to comply with manufacturers instructions and ensure tight connections I’m not sure if socket manufacturers like MK give torque settings for sockets and switches I doubt it

@imark7777777 4 роки тому

the torque settings are required because they're not getting torqued down properly because they're not getting installed properly but we make that a requirement and it fixes all the problems right? I wondered what was up with the expanding board as well. I would have put in a larger 3-phase board keeping the single phase board that way you don't have multiple phases in the same box or doing a complete rewire. but most importantly not having to stick big bright orange stickers on every light switch, I think the sticker craze is a little bit crazy over there on that side of the pond.

@acelectricalsecurity 4 роки тому

@@imark7777777 yeah your right we are sticker crazy, some even put stickers on when theres no need to, there are lots of electricians that will put a 230v sticker on the fuse board, why i dont know, they dont bother with every socket, switch or light but think its necessary for a fuse board. you will see a few on youtube going above the requirements, which is fine, but then they will get the basics wrong, i find that very funny.

@acelectricalsecurity 3 роки тому

@@gadgetman36 that's right there are no torque settings, and that's only because fires are starting in the fuse board, and not the accessories. And rather than deal with the cause, knob heads with limp wrists, they try and deal with the symptoms.

@JasperJanssen 2 роки тому

@@acelectricalsecurity it’s not just loose wires, it’s also too tight wires. Both are bad (if for slightly different reasons). We all had to develop that Feel sometime. I know I’ve snapped more than a few (especially smaller) screws and bolts as well as otherwise damaged equipment. Pretty sure I’ve never left anything loose, but that’s me. Especially for the first years of learning to use things, a torque spec and a torque wrench are of immense help. Given the consequences of getting it wrong - you’re not even burning *your own* house down, but someone else’s - I am 100% fine with this reg. One thing that is weird though is that they specify a precise torque and not an allowable range. That especially leads to absolutely bonkers situations where there are like 4 or 5 subtly different torques required on various bits of a board - while in reality they’re probably all fine at somewhere in the middle.

@lammy2304 3 роки тому

Hi Jordan.... might of been mentioned or I might be wrong here but it looks like you moved up from table 4D4A to table 4D2B for your voltage drop. Should you not of gone down to table 4D4B for the correct voltage drop figures ??? 🤷‍♂️🤷‍♂️ And I’m sure for the Earthing nuts it states to use the serrated side to remove the paint and then turn around to the smooth side when fitting ??? Good vid though mate 👍👍

@pedrogounder3862 2 роки тому

How many wire are there all together to make a dub board

@gavindebrito7117 4 роки тому

Great video Jordan. Did you you know screwfix do earthing nuts for about £6 a pair.Amazon seem very expensive at £16+ for same.

@artisanelectrics 4 роки тому

Yeah you’re spot on!

@liamk15 3 роки тому

neutral in number 1 as its classed as one mcb, any additional mcb's would go into 2,3,ect

@jasoncowell1001 4 роки тому

When I do boards , I like to prep as much as possible before hand , ie I would of drilled my 20 or 25 mm hole out for the armoured before putting the board up , and I still use pencils 😁

@artisanelectrics 4 роки тому

Great yeah I should have planned better and drilled the top hole before, but it’s always easier in hindsight! Gotta love a good old pencil! 😂

@MegaJonesy84 4 роки тому

Great videos, How do you size the fly lead earth?

@artisanelectrics 4 роки тому

Thanks Jonesy, I usually try to match the size of the conductor in the cable, so in this case I installed 6mm.

@tomorichard 4 роки тому

If relied apon as a cpc the adiabatic equation should be used to sizes the fly lead If the SWA is used as purely as a protective measure against damage the fly lead should be sized to satisfy adequate fault protection and thermal effects

@pauljones908 4 роки тому

Another good vid and the board looks to be in an awquard space. Probably would have changed the Eaton DB for a larger Schneider one and gone out in 6mm XLPE 90 degree thermosetting. Is the 3 phase socket not 32A? With it being a socket i would have gone for a 32A MCB to give it overload protection and then the breaker is also rated for the switchgear. Especially if its a switched socket type. I know its a fixed load they are plugging in for now but there is nothing to stop anyone in the future from plugging anything else in. For 3 phase ive always wired in to number 2 for each. Im not fully sure but do you still require metal fastenings if its running outside? Maybe across doorways but im not sure?. Looks good as aways! Keep it up 😁👍

@artisanelectrics 4 роки тому

Thanks!

@paulmorrey733 4 роки тому

Thanks

@artisanelectrics 4 роки тому

You’re welcome!

@michaelboyes4948 4 роки тому

What manufacturer cable do you use because I use Doncaster cable and there SWA doesn't strip that easy

@artisanelectrics 4 роки тому

Not sure what brand it is it just says Basec on it

@richardwalsh5882 4 роки тому

It's safer not to break the neutral in a three-phase system unless you need to (e.g. a TT system). In a TN system it is better not breaking it as any failure with early make/late break on the neutral will cause voltages approaching 400V to go through any single phase loads. I would definitely have gone for the triple pole main switch with a bolted neutral for safety reasons if it was me.

@artisanelectrics 4 роки тому

Interesting thanks

@artisanelectrics 4 роки тому

What do you mean by early make late break

@richardwalsh5882 4 роки тому

@@artisanelectrics you will find that the neutral pole is designed to close before the phase poles, and is also designed to open after the phase poles. This is to help mitigate the dangers of the neutral being disconnected whilst the phases remain connected. As I said, in a TN system it's safer to have a bolted neutral rather than switching it.

@Mike_5 4 роки тому

@@artisanelectrics The sequences in which the switched conductors (Phase or Neutral) are disconnected or reconnected by the switch mechanism

@totallynotgacha1755 4 роки тому

@@Mike_5 Great comments here, the danger of a floating neutral on a there phase install is something everyone should be aware of. Seen the damage it can cause.

@adamburton9364 4 роки тому

Great video, but now they have 3 boards in two rooms, could you not have used the existing 3 phase board or replaced it for the new circuits?

@artisanelectrics 4 роки тому

Yeah it’s not ideal but there wasn’t room to enlarge the existing boards and no spare ways so no choice!

@charliechimples 3 роки тому

Great vid once again. Thanks for sharing. 🐵

@artisanelectrics 3 роки тому

Thanks!

@Sparkyt552 2 роки тому

How comes you didnt just install a normal consumer unit,could you please help im struggling understanding 3 phase boards

@Richardincancale 4 роки тому

Interesting video - good work. Comment - the background music was a bit distracting - too loud behind your voice.

@artisanelectrics 4 роки тому

Thanks will tone it down for the next one

@tommochelsea72 4 роки тому

I’d always put the neutral (and earth) in terminal 2 if my three phase mcb was in 1,2,3. Just my preference but always done it like that.

@artisanelectrics 4 роки тому

Thanks yeah I vary between 1&2

@dakyehenekobbyracstone7161 3 роки тому

Good work done, but waiting for part 2.Please how can i get the book that you were using i'm in ghana.

@alexwilliams4673 3 роки тому

That book is only relevant in the UK

@g7eit Рік тому

Can you let me know where you got that little yellow stripper? (That sounds so wrong 😂).

@joshmark6409 Рік тому

Any book suggestions??

@taleklewis9069 11 місяців тому

anyone know what that yellow tool is called?

@PJB71 4 роки тому

Great video 👍🏼 4 pole isolators for TT installations as all live conductors must be switched for isolation. TN 3P systems the neutral should not be switched for isolation, I can’t remember why🥴.

@artisanelectrics 4 роки тому

Thanks! Is there a reg for that?

@PJB71 4 роки тому

Hi, Yes there’s a reg, It’s under isolation. I’m sure It’s to do with the neutral not being reliable earthed. Cheers

@robswingler 4 роки тому

Did you have to fit an SPD seeing as it was a commercial job? You either do the calculations or fit one in that scenario

@artisanelectrics 4 роки тому

No SPD required on this one as very little electronic equipment on site

@robswingler 4 роки тому

Artisan Electrics doesn’t work like that for commercial properties. Only for single dwelling ( domestic ) commercial you either do the calculation and see if you need one or just fit one . Check out reg 443.4

@RJSElectricalCheshire 4 роки тому

Nice video

@artisanelectrics 4 роки тому

Thank you Richard

@glynowen1349 4 роки тому

Am I wrong in thinking the regs say regarding metallic clips for cables ect is only above suspended ceilings?

@artisanelectrics 4 роки тому

Yes you’re wrong I’m afraid. Fire resistant clipping is now required throughout all installations to prevent premature collapse in the event of a fire.

@glynowen1349 4 роки тому

@@artisanelectrics thank you. I thought so and are using metal fittings. but heard a differing opinion regarding wording in the regs. Great vids by the way.

@thorntonselectrical968 4 роки тому

Hi, was thinking of getting the codebreaker book any good? Would you do a quick review? 👍

@ashmanelectricalservices4318 4 роки тому

The codebreaker book is brilliant it has practically every observation you can think of and the recommended coding. Might be worth highlighting the common ones so that you're not spending ages looking for the right wording or regulation number.

@artisanelectrics 4 роки тому

Yes it’s excellent. Good idea I will add it to the list!

@artisanelectrics 4 роки тому

I noticed in the codebreaker book recently that they code no RDC protection for câbles buried less than 50mm in walls as a code 2 and that surprised me as I’ve always put it as code 3

@ashmanelectricalservices4318 4 роки тому

@@artisanelectrics That's partly the reason for the introduction of RCD's and Part P. Back in 2004, a MP's daughter was electrocuted and died when a fixing screw used to mount a drying rack, penetrated a cable beneath the surface, the cable was only installed 10mm from the surface.

@thorntonselectrical968 4 роки тому

Artisan Electrics how you gonna know 😂

@bentumbentum 4 роки тому

i Think N not switched bc when measurment is not clear you have a live eg on a motor. so you can sure you meas. over N.

@python8018 4 роки тому

SPDs are mandatory on industrial and commercial jobs, only optional with risk assessment on domestic.

@artisanelectrics 4 роки тому

👍

@boom321000 3 роки тому

Is it not 5% of the actual voltage reading?

@MaxMustermann-kp2dv 4 роки тому

Artisan: No one puts his pencil behind Thomas Nagy: Hold on...

@artisanelectrics 4 роки тому

😂😂😂

@tc_electrician5329 4 роки тому

Hi Jordan ! Nice video mate ! Quick heads up are you sure you have 70 degree thermoplastic cable ? Most SWA cable you get from wholesalers is 90 degree thermosetting unless you specify it ? Regardless it just means you have more allowable CCC hope this helps you in future 👍🏻 keep up good work love the videos 👍🏻

@artisanelectrics 4 роки тому

Yeah it’s actually LSF I specified that.

@richardwalsh5882 4 роки тому

You will find that the terminations are NOT suitable for 90 degree operation, and therefore you should NOT be using the thermosetting cable ratings.

@artisanelectrics 4 роки тому

What terminations?

@richardwalsh5882 4 роки тому

@@artisanelectrics I was simply pointing out that you were correct not to use the 90 degree tables as although the cable is rated to run at 90 degrees, the terminations at either end of the cable are almost certainly not.

@tc_electrician5329 4 роки тому

Artisan Electrics sorry mate I was half watching half on Instagram so I didn’t hear everything 😂 just saw the 70 and thought I could help haha ! I should really listen 😂

@tent7014 8 місяців тому

Jordan, who is Heath Robinson ? One of your Apprentices ?

@artisanelectrics 8 місяців тому

Heath Robinson refers to a British term that describes overly complicated and humorous contraptions or machines designed to perform simple tasks. These contraptions are characterized by their absurd complexity, using an excessive number of convoluted and often impractical components to achieve a straightforward goal. The term "Heath Robinson" is often used to describe situations or solutions that are needlessly complicated when a simpler approach would suffice. It's akin to the American term "Rube Goldberg," which has a similar meaning. Heath Robinson's work was primarily in cartoons and illustrations, depicting these whimsical and impractical inventions, and he became known for this unique style of humor.

@chrissharpe2781 4 роки тому

Neutral on a TPN goes to 2. If only so the next person has to stop and think “why’s he done that”. Not that it makes much difference because the next bloke always seem to just throw his N in to any old terminal.

@artisanelectrics 4 роки тому

Too true😅

@charalambosflouri1860 4 роки тому

The use of 4-Pole (for 3Ph installation) or 2-Pole (for 1Ph installation) isolator I strongly believe is a good practice because you can perform easily insulation resistance tests without having to remove the neutral conductor, you can easily isolate neutral leakage currents (e.g. appliance fault or fault in an SPD when it reaches its end of life) without tripping the main RCCB (300mA Type S) of the electrical installation.

@artisanelectrics 4 роки тому

I agree! Thanks for your comment!

@mobileinstalls1932 3 роки тому

Not mark by R-Y-B???

@apwandy 4 роки тому

462.2 Every circuit shall be provided with isolation means for all live conductors, except as detailed in regulation 461.2

@artisanelectrics 4 роки тому

Thanks

@misstakenot9582 4 роки тому

When doing your cable size calcs you mentioned 230V. Should that not be 400V in this case?

@marksaunders8490 4 роки тому

Miss Take Not correct 400v 3 phase 400 x0.05= 20 volts guessing here mind😊

@chrisdallimore8650 4 роки тому

I dont know its it's my OCD but the earth bar should be where the natural bar is and vice versa anyone else have any different opinions?

@artisanelectrics 4 роки тому

Why?

@mrhaydon 4 роки тому

Why the use of Sy cable?

@scratchblack 4 роки тому

Its flexible and braided so very durable

@mrhaydon 4 роки тому

@@scratchblack Why not HO7? Nobody ever earths the braid on SY.

@marcwilliams3921 4 роки тому

Doesn’t look the best of walls to fit a db back to back. I would stick the neutral in 1. When u fit the next 3 mcb down I would do that as 4. 4 pole isolation is always a lot better

@artisanelectrics 4 роки тому

Thanks, yeah I used 1 as well. Wall was pretty solid.

@alexwilliams4673 3 роки тому

Better unless there is a UPS in place, like say in a hospital

@ashmanelectricalservices4318 4 роки тому

You didn't look 'phased' by that job whatsoever 😂😂😂

@artisanelectrics 4 роки тому

Joker! 🧀

@ashmanelectricalservices4318 4 роки тому

@@artisanelectrics Too good an opportunity to pass up 😉

@UserName-yk7om 3 роки тому

🤭 He's got a lot of potential 😆

@leeprice386 3 роки тому

write in 7671 book 3% and 5 % . voltage drop 6.9 volts max on lights and other is 11.5 volts max never have to work it out again

@AKGaragezz 3 роки тому

is this a diy 3 phase tutorial ? :))

@sonnyjim7579 3 роки тому

Yeah mate. Clearly this is a diy tutorial 🤣. Its not that hard. Learn the three colours and you're good to go

@gerhardkutt1748 3 роки тому

Mic not working??

@nickbuckle646 4 роки тому

Just use a banjo with a brass nut and bolt, those earthing nuts are meant for when you glanding into plastic boxes really, no real benefit using them when your going into metal, infact more awkward due to metal lip on the DB.

@artisanelectrics 4 роки тому

Thanks but I would disagree I think they ate for metal boxes as they have the teeth to grip into the metal to make a good connection, plastic boxes don’t need earthing so you don’t need a banjo. As long as the armouring is earthed at one end it’s fine if you have a separate cpc within the cable

@nickbuckle646 4 роки тому

@@artisanelectrics.Those earthing nuts were developed primarily with plastic boxes/enclosures in mind. You can of course use them on metal but its quite wasteful and unnecessary. For instance where you might have IP65 Rotary isolators mounted outside with SWAs in and out they are ideal for maintaining the earth continuity of armouring through to the load. In that situation Banjos were always a pain as you either have to drill your IP65 isolator to bolt through or bend them up and nut and bolt a fly lead between both Banjos neither option great, so the earthing nuts are a god send in those situations. The teeth are there to bite into the plastic to prevent the glands from slipping.

@artisanelectrics 4 роки тому

132 Buckleup1000 useful info thanks!

@jaye8578 4 роки тому

Those piranha nuts been out for years Swa storm glands are good and look neater than old fashion shrouds

@richardday2893 4 роки тому

Has piers morgan ever been mistaken for an electrician?

@artisanelectrics 4 роки тому

Funny

@iandrew6347 4 роки тому

You not Aloud to use SY Flex’s as mains voltage it’s not recognise In the Regs it’s alone used as a control cable

@artisanelectrics 4 роки тому

Yes you are that’s a common misconception.

@happygilmore7115 4 роки тому

You can use sy, but it should be put in departures.

@jasonlee3247 4 роки тому

ian drew bloody hell, they let you loose with mains voltage and you can’t even spell basic words 😮

@iandrew6347 4 роки тому

Jason Lee well Jason I may have trouble with spelling specially when I am dyslexic but I am a very good electrician so f##k off

@peterlewis1106 4 роки тому

How about discrimination? Socket rated 32A protected by 40A ?

@ajamespepper19 4 роки тому

Best do the 18th peter no such thing as discrimination think you mean selectivity

@jfoxy23 4 роки тому

I agree with the socket and protective device statement though. I pull that up on EICR’s socket outlet rated at 32 A protected by C 40 MCB.....

@peterlewis1106 4 роки тому

If you had 80amp cut out would you put a 63a main switch or 100amp? And I've done 18th edition thank you

@ajamespepper19 4 роки тому

@@peterlewis1106 well u should of said selectively then

@ashmanelectricalservices4318 4 роки тому

Looking forward to Part 2, hopefully there'll be a bit of testing in it.

@artisanelectrics 4 роки тому

Thanks! Yes there will! And two different testers!

@ashmanelectricalservices4318 4 роки тому

@@artisanelectrics Well I know you already have a Fluke 1664 FC, I wonder what the other will be 🤔🤔🤔

@shane121 4 роки тому

Nice video but please take the music of I can't hear you

@erwinabelmann 4 роки тому

Thank god thats England is an Island

@artisanelectrics 4 роки тому

Why?

@heladas90 4 роки тому

Eughh that 3 phase board, use schneider with isobar all day long

@fargogemini694 4 роки тому

What’s that brick for 😂

@artisanelectrics 4 роки тому

They made some sort of shelf in the cupboard out of a board and some bricks, I removed it temporarily while I did the work.

@corrigenda70 3 роки тому

How sad to lose the gas ovens...

@artisanelectrics 3 роки тому

Yeah

@judg3y352 4 роки тому

need a better cam

@artisanelectrics 4 роки тому

What camera would you recommend?

@laidbackguyhk 3 роки тому

Love watching your videos, but could you please cut out the background music.

@artisanelectrics 3 роки тому

Yeah I have done since that video

@zxcvb7809 Рік тому

Really interested in the content but, the audio is so bad and made even worse with the sound effects overlay that it becomes worthless. Better to take it down from UKposts

@NicksEnprome345 2 роки тому