Johnny, you should mill out some 1 piece rotors for that blower and open up the ports so it actually flows air.
@technicbuilder641029 днів тому
And if he gave them some twist they would probably be smoother.
@1one3_Racing29 днів тому
There's a reason nobody does forced induction on RC engines. It doesn't work.
@yoda354929 днів тому
real screw/roots blowers have Teflon strips to help seal. i dont know if he could do that too.
@everettstormy29 днів тому
@@1one3_Racing rc airplaned have been using superchargers for a long time lol
@1one3_Racing29 днів тому
@@everettstormy is this an aeroplane?
@filmgunproductions444829 днів тому
The sound never gets old, and hearing it on a moving chassis outside is just fricken amazing
@radweld29 днів тому
You need to ensure the fuel tank remains pressurised by feeding exhaust pressure into it. this way, fuel is always forced into the engine.
@GeomancerHT29 днів тому
Very nice way to blow things up.
@kynghype971529 днів тому
@@GeomancerHT Thats how nitro engines work, do your research lol
@tm512329 днів тому
@@GeomancerHT All RC nitro engines do this, pretty much.
@mattinwinkymg29 днів тому
@kynghype9715 Geomancer probably thinks EGR valves are a good thing too 😂😂
@kleetus9229 днів тому
@@mattinwinkymg Lol... oddly enough I got into an argument with someone about that and PCV systems too!
@WhiskeyGulf7129 днів тому
It stalls sideways because the wheels have stopped turning ! It’s lost its forward momentum, at low rpm you have practically no torque available from the motor, it’s not a diesel engine & you have a huge flat spot in the power.
@andruwmartinez412929 днів тому
I'm sure this has a one way bearing preventing that issue
@chevyman561829 днів тому
@@andruwmartinez4129it stalled In the beginning of the video when he engaged the clutch then had to give it gas to take off running
@rsquared970329 днів тому
It’s a traditional manual transmission. When the clutch is engaged you can’t just stop. I know he put that Revo transmission in but that doesn’t change the direct drive nature of the setup.
@danw195529 днів тому
No, the carbs are losing their prime because there's no tank pressure. The diaphragm pumps on the carbs depend on intake pulses to function, and at high rpm the pulses are too close together to provide sufficient volume. That's why you have run a line from the muffler to pressurize the tank. This is done on a lot of RC planes as well for the same reason.
@jimsimone265129 днів тому
For curiosity sake since I'm not a mechanic or engineer or mechanically incline... would a check valve "back flow preventor" work similar to plumbing applications?
@Gunandgameguy29 днів тому
I have dreamed of seeing a V8 RC car since I was like six thank you for making this I couldn’t stop smiling
@Kettletrigger29 днів тому
A heavier flywheel may help with the shutoff problem.
@fra572425 днів тому
Why??
@goosebox906424 дні тому
@@fra5724more inertia, but the problem there is it wouldn’t be as rev happy. It should still rev plenty though because it’s a
@fra572424 дні тому
@@goosebox9064 ty
@someonesomewhere_77724 дні тому
It would actually reduce the engine RPM; plus he's already burning out clutches on the flywheel he has, so this might not be a good idea. The comments above about pressurizing the fuel tank with the exhaust is probably an easier solution and won't require any additional modification. Seems to me like the system is losing fuel flow to the dual carb setup in a tilted position which is very indicative of low fuel pressure.
@Kettletrigger24 дні тому
@@someonesomewhere_777 A heavier flywheel will not reduce engine RPM. It WILL slow engine response due to more inertia, which is why a lightened flywheel is a common performance modification. The downside to a light flywheel is a tendency for the engine to lose RPM quickly...sometimes so quickly that it dies. Which is what might be happening here. Slowing engine response will not hurt the clutch. If anything, it will increase clutch life due to more gradual changes in RPM. Johnny has a lathe and a mill - adding weight to the flywheel shouldn't be a big deal (if that in fact is the problem).
@blueexnetic29 днів тому
The effort and determination of this guy is insane. Every time I see one of your video's in my for you page I don't even hesitate to click on them. I am proud to be one of your 1.87M subscribers!
@HolloMatlala129 днів тому
I am a here as well....Count me in on this comment
@mickgibson37029 днів тому
I myself! I had raced Car, Motorcycle, and RC!
@htothec129 днів тому
100% agreed. This man has the best channel on UKposts. One hell of a smart man
@proximo103329 днів тому
That is becoming some serious automotive design, i mean that colling and exhaust, you grow my man!
@jared910829 днів тому
If you think it’s fuel sloshing make baffles in the tank to reduce the liquid movement. And also the low rpm if you throw the drift tire with a plastic sleeve you can draw your conclusion of fuel loss and or rpm being to low
@CptDallas29 днів тому
Review how gas RC PLANES do it. They go inverted and still have power.
@FSShenanigans29 днів тому
Full size car our fuel cell has foam in it to prevent sloshing may be easier than making baffles
@dylancoventry912229 днів тому
I’ve been watching since you got the V8 and I’m stoked to see it driving and skidding around bro, well done 🙏
@austinkoeppen612229 днів тому
I'm just impressed with how well it starts, I've seen lots of others struggle with these.
@giorgoskaras539929 днів тому
Φίλε Έλληνας είσαι σε βλέπω τόσο καιρό και δεν με πήγε ο νους ότι είναι Έλληνας. Μπράβο ρε φίλε συγχαρητήρια, τέλεια βιντεάκια
@panosbosst417629 днів тому
Φίλε και εγώ έπαθα πλάκα τον βλαιπω πάνω από 2 χρόνια και δεν μου είχε περάσει ποτέ από το μυαλό 😮
@user-rp8zv8nl6n23 дні тому
Ναι ισχύει παιδιά ο τύπος είναι πολύ μυαλό!
@mikellewis234629 днів тому
Best v8 rc ive seen running an driving so far on UKposts....❤
@17111993DAVE29 днів тому
I bet youre so happy to see it coming together. I know your viewers are. Way cooler than normal RC cars nitro or battery. Well done.
@lhionaleobary258229 днів тому
its been more than 2 years followed you and i'v seen this little thing grew and now its 90% finished i am so proud of you. gg and continue let's go to the 2mill
@thegarynator29 днів тому
This thing is so dang cool! Thanks for sticking with it and continuing to share!
@lordbunny241629 днів тому
U could cut a two slots into the metal, to maintain balance of the clutch and into the friction material, and use two dowel pins plus a lil glue to keep it from delaminating!! Just a thought!! Keep it up, love the Vidz!!!!
@doranjohnson536528 днів тому
This dude and these builds inspire me to go learn how to do stuff. So freaking cool. Thanks for documenting this for us, Johnny!
@waynewilliams855412 днів тому
Just get the four- stroke sound is amazing. Phenomenal piece of engineering all around!!
@adamdiaz844227 днів тому
I bet that felt great getting it out for a spin congrats bud awsome work
@rcOhio29 днів тому
Great test drive! It sounds so good! Thanks for sharing JQ90!
@mattculpepper644429 днів тому
Awesome video as always, Sir. Long time subscriber. As an American, I always love seeing a fire breathing V8, in any form. I hope you can get the blower figured out. Keep up the great work Mr. Q90!
@AngelLuisTrinidad29 днів тому
I will like to shrink myself so I could drive it. Dispite the repairs it needs I still find it perfect and awesome. Great work Johnny.
@brettc538629 днів тому
I've been waiting for this video for so long and I'm glad it's finally here. But also I can see it needs some refinements in the power band, especially in the low rpm, knowing your potential it would be amazing to see you make turbos like you did for the twin cylinder 4-stroke, but have two different sized turbos and connect them in a compound setup so that way you can get the most torque down low and horsepower up high.
@ZaydHakim29 днів тому
That rc has 4 more cylinders than my Subaru 💀
@TheYetiSlayer22 дні тому
That's absolutely epic!!! Great job man!!🙌🏻👏🏻
@ValerianHD27 днів тому
make it loud
@mrtambourineman6107День тому
He should learn to drive it first!
@ValerianHDДень тому
@@mrtambourineman6107 no, make it loud first
@johnkilo329 днів тому
At first I was worried JohnnyQ90 wasn't devulging that he is sponsored by Toyan or Sterling Kit, and that he actually gets all these engines for free. You're supposed to let people know if you're sponsored. To be honest, though, I think these videos have made me want these small engines less and less the more of them I see. Imagine spending $1700 on this "supercharged" V8, plus everything else needed to get it to run (and even more if in an RC chassis), and the thing just breaks almost immediately because of terrible manufacturing and tolerances. I'll stick with enjoying watching someone else spend tons of money on getting them to work right.
@OhHeyItsBilly29 днів тому
I don't mind he's sponsored or not. I love the creative process in his videos. I think he does a great job. I love watching all of the unique machining parts and 3D printed parts. Those engines seem on the surface really awesome but I can tell they break catastrophically really easy, the tolerances in the machining process are probably not good at all even though it "looks" good. Being sold extra attachments like superchargers that actually hinder and hurt the motor instead of actually giving more power. You would have to have a bunch of expendable income and enjoy this as a hobby because these motors seem like they're really low quality and horribly made and unreliable.
@johnkilo328 днів тому
@@OhHeyItsBilly I don't mind if he's sponsored either, but you're supposed to disclose it.
@Man9482427 днів тому
bit rude i do say
@ThatOneGuyWithTheEye22 дні тому
You can literally buy a real roadworthy car with a real motor for that price. Most of mine have cost less
@robbosrc11 днів тому
I know right here I’m Australia it’ll cost me about 2.5k for just the engine
@user-pd1vg1qq1x27 днів тому
creating a body for the car once it is mechanically sound would be so cool! , it would literally be a mini car! , great vid once again!
@joequashnock155221 день тому
So exciting to see that beast off the chain and thrashing about! Just like any scratch built DIY project, things are going to happen. I have 100% faith that you will work out the bugs. Looking forward to the next update!!
@mohammadaminranjbar900829 днів тому
very exciting V8 sound! great work!
@NoobAlike29 днів тому
glad to see it finally roam free on the ground! all that work!
@just.jose.youtube29 днів тому
Thank you good sir for making our dreams come true! 🙏🙏🙏 A V8 RC... 😍 What a great set if skills you have!
@joshuasterling214422 дні тому
It seems like there is a lot of hope for this project to actually come all the way through. Looking great so far and I can see it getting the last 25 percent improvement and then it probably will be the best rc car of its type on UKposts. It starts, the throttle is responsive and its fast enough to warrant the effort.
@tuna346129 днів тому
That sounds awesome dude holy fuck. This is like the next level in realism. Hearing it pass you even at those low speeds is insane
@tuna346129 днів тому
How loud is it? Is it painfully loud like a typical nitro engine?
@laurentdarcq562429 днів тому
Amazing ! Superb ! Congratulations !
@Evans_Man25 днів тому
Δεν περίμενα ότι θα έβλεπα τέτοιο διαμαντάκι στην πόλη μου! Πολλά συγχαρητήρια!
@lolbots11 днів тому
what's your city?
@gavriilk744026 днів тому
Μπράβο φίλε , Πάχη Συνέχισε έτσι, Και πάλι μπράβο 👍🇬🇷
@flashforum93929 днів тому
What a sweet ride - love the sound
@richardoeser564328 днів тому
Sick! Love seeing them drive and operate
@shize9ine29 днів тому
im excited to see you make alloy rims next ep!
@Dollfin3423 дні тому
This thing is so sick, can’t wait to see the final version
@fobbitoperator36207 днів тому
I can only imagine how long it took you from concept, to making this video of it driving. R&D is an unimaginably arduous task of success & failure, until you get to the point of consistant successive runs of pure V8 stomping runs of smiling, until your face hurts. Some people think making these "toys" is a waste of an adult's time, energy & resources. What low brain wattage floofs don't understand is, this is the very type of activity which gives some of us a reason to wake up on the weekend mornings. Never stop researching, developing, assembling, testing, & succeeding!
@Tyblerone21 день тому
Dude these videos are so friggin' cool.
@Tinman6354ty10 днів тому
Fantastic model !!! Can’t wait to see it with the supercharger working and a flat out run for top speed. Not much into drifting and burning up the tires. Would love to have one of these, first one I’ve seen with the actual engine being used in a vehicle.👍🏻
@AceNinja211211 днів тому
Johnny is an engineering genius!
@slyknezz686229 днів тому
Very Cool!!! Such a unique sound for an rc!
@vincentoden862529 днів тому
i think part of the reason it stalls when u slide is causee the engine just doesent have enough energy to keep going when the wheels slow down after a slide. real cars do the same if u spin and dont disengage the cluch
@auwz6629 днів тому
Excellent stuff! I think you might benefit from a baffle or two (or foam) in your fuel tank.
@bigdadgigachad304229 днів тому
CONGRATS 🎉👏🏆
@TheBeetle729 днів тому
Ein Geiles teil, super Arbeit .
@atishayajain186229 днів тому
This thing's gonna burn some rubber 🔥🔥🔥
@shkiper422429 днів тому
Sounds awesome !
@jaybomb502229 днів тому
Pulling air bubbles into the fuel line. Add a splitter with 2 inlets inside the tank. Or a piece of fuel filter foam to stop the sloshing.
@Dingle-Berries23 дні тому
This guy is smart and clever to figure it out, he knows his car well. Dude built it from scratch
@letsdosomething669129 днів тому
I agree with a lot of these comments about the stalling issue. I’m leaning towards the idea that was mentioned about the clutch being still engaged while the car comes to a complete stop. That would definitely stall my car at least. That also probably played a roll in the clutch breaking. If it’s a fuel issue though, my suggestion is try a bigger fuel line, and a carb bowl if they don’t already have one. The bigger line will keep it from hydro locking, and the bowl will help with whatever air still gets through. As for the super charger I’m on team solid rotors lol. Those have to be one, solid, smooth piece to get rid of the slap. They have way too much wiggle being three pieces each. In other news; line lock? Totally unnecessary and would probably destroy the transmission but man would it be cool if it worked. Just sitting there roasting the tires and then turning it off and peeling away. As always, love the video. Keep up the awesome work, and I can’t wait for the next one.
@MDBenson28 днів тому
I'd add a baffled fuel cell to the list too, maybe put some foam in there and or make something custom with a baffled swirl pot built into it, the sort of thing you see on drag cars. The sudden direction changes and inertia were visibly causing the fuel to climb up the side of the tank which as the fuel goes down are probably starving the feed line.
@samghost139 днів тому
It sounds awesome!
@mafroh473328 днів тому
I can't wait to hear it tuned!
@mrluken-official29 днів тому
This thing sounds good!
@Pelmen.Nik503129 днів тому
Круто получилось, осталось только корпус подобрать и будет пушка 👍
@jrtate112327 днів тому
It sounds cool as hell 🤙🏽
@Shadow0fd3ath2429 днів тому
thing sounds SOOO good man! Id go to a positive pressure fuel system like nitro cars run normally where it gets some exhaust air to pressurize it
@emerilnut29 днів тому
Sweet! So glad you're at the testing phase. I've been watching the build process and am REALLY IMPRESSED! I don't know if anyone has mentioned it yet or I may grant forgotten if you already thought about this, but have you implemented some runaway protection? You know, how to make the car stop if it loses contact with the radio while under full throttle. Always an issue with nitro RC cars.
@benjammin307823 дні тому
Amazing totally 👍 on board with your drive in making outer perfection on a machine that’s thrills the senses of WOWness in the ability to create kudos to you bro 🎉🎉🎉🙏👍
@justmechanicthings20 днів тому
Wonderful progress Johnny sounds like a nascar
@projectcar948829 днів тому
About time! Make it run alrwady
@dfgaJK29 днів тому
sounds sooo good!
@mattbellina548526 днів тому
Really freaking awesome!
@MartyGramRC27 днів тому
@JohnnyQ90 - just a thought: set up the throttle and clutch actuations on the same servo (or multiple servos from the same channel) - as you give it more throttle, the clutch starts to engage, and as you let off, the clutch disengages. This would take an incredible amount of fine tuning, but I’d imagine would work extremely well, but still provide that realistic functionality you’re looking for.
@RJ-wy6cx13 днів тому
That is absolutely awesome😮
@phildavis128229 днів тому
Keep it up johnny your just too cool 👍
@jakedeutscher4 дні тому
This thing is cool man!!
@3dpoolslandscapedesignsbyr83024 дні тому
first time ive ever seen somone actually do work other than idle, great job! looks like a better application would be a monster truck or rock crawler
@christopherlenahan390629 днів тому
My guess is rotor shaft flex and the tolerances of the supercharger synchro gears: -That tri-lobe rotor looks to be a 3D ratio, with 3 segments I doubt it has the rigidity to stay straight under boost. -The synchro gears would need to have insanely tight tolerances and sub tenth backlash to maintain the lobe seal with such small gears/rotors. Even operating with a wet seal design. -If you do decide to make your own rotors, may I suggest a helical tri-lobe.
@beyondquestion22 дні тому
This is dope, I like what ur doin!^^ Awesomeness!, thx for the good vid, with NO MUSIC, just true sounds, including tools, very rare today!! \O>
@Darcho1329 днів тому
It has a terrible understeer, the car doesn't want to turn. And if you apply too much power, it immediately oversteers. I suggest you check your differential (if exists) . This issue causes extra load to your engine and clutch while turning. The car came from a long way, and I love how you build it with great effort and create quality content. Keep on, friend across the pond!
@EJ-7425 днів тому
So awesome to see it driving...
@TheOfficial_InsaneStang29 днів тому
Dude, ya got this!!! 🤘😎
@danw195529 днів тому
The comment about the tank needing to be pressurized is correct. They flow a lot of fuel at WOT, and the diaphragm pumps in the carbs can't keep up with it unless you have some tank pressure. You might look into sintered bronze for your clutch basket. The hotter it gets, the better it works. You may need a bit stronger return spring though.. Other than that, pretty good run for the 'first' time out!!😄👍👍
@triynizzles29 днів тому
I would love to see new rotors for the supercharger!! There's so many videos out there with little superchargers and turbochargers for micro engines like this and none of them ever work. it's so sad I want to see one that works. you can do it!!
@fra572425 днів тому
Great video!
@holdmybeer393129 днів тому
It’s getting faster and more responsive 👍
@justdontlook0129 днів тому
Using the exhaust to pressurize the fuel tank is good. Putting partitions with small holes into the fuel tank might help with stalling when sideways. that way the fuel doesn't slosh around as much.
@TRFH129 днів тому
stalling- could be fuel pickup location on your tank you are using, also can play with the length of the hose from the exhaust to the tank to help keep constant pressure in the tank.
@Pigpin1329 днів тому
That thing sounds so mean. Love it
@GavinY28 днів тому
The sound is so good
@rjansen687429 днів тому
I think a 7.5cc nitro engine 1 cilinder wil outperform all those toyan engines. Sad but treu. I still love it that you try making them work!!😍
@stevensims334221 день тому
Need a locking slot or slots for the clutch lining or something. Really neat project!
@sch0neDK29 днів тому
Nice to see it driving :-)
@raulbustamante833725 днів тому
The sound is brutal
@UnitSe7en29 днів тому
It has a very realistic, very scale look to it's speed, power and stance.
@NonEuclideanTacoCannon29 днів тому
It would be interesting to spin the supercharger at operating RPM without the engine, to see how much air it moves. I think these tiny engines are too small for forced induction to work properly. And I think the tolerances are probably just good enough for them to run, I think any substantial level of boost would bend things or just end up being lost as blow by. I'd love to be proven wrong, though. "2 Stroke Stuffing" gets an astounding amount of power out of a 50cc engine, but that's only one cylinder, and it's actually designed for vehicular use.
@antoniskotis520820 днів тому
Then start from control is very important and awesome
@jz6423 дні тому
Badass good work
@Kawasakirider4626 днів тому
You could fill the gas tank with race foam it prevents the fuel from sloshing around
@demantoid41829 днів тому
Sick. 😯 You are getting close. She is going to rip. Thanks for letting us come along. 🫡
@antlee157927 днів тому
Hey, here's an idea. Keep doing what you're doing, as long as you are having fun. I enjoy watching a builder working things out and growing a skill set. Hopefully, some sponsors will help with more tools and connections to push you more. It was my first time watching you, and subscribing is not a question for me. Subscribed. It would be nice to see you in the comments if you have not already.
@perwestermark892029 днів тому
I think the stalling is many things at the same time. - low torque at low rpm. You either need to have the clutch slip or do a burnout to maintain enough engine rpm. Your lose all speed forward which forces the wheels to stop. You don't have enough gears in the gearbox to help keep the engine rpm. - add some baffles in the tank - consider some exhaust to add fuel pressure. Great video. But maybe not so great for the supplier of the compressor. It did have issues even before you installed it, being silent in only one direction. They need to step up their manufacturing quality and testing.
@alienrace29 днів тому
Agreed. I still think a centrifugal clutch like a typical nitro car would be the best option.
@perwestermark892029 днів тому
@@alienrace Yes, having automatic clutch slip at low rpm makes life easier.
@applesbighatranch690627 днів тому
Sounds much better sans blower. I wanna hear it through 180* headers. Thanks for the vid.