Normally i wouldnt expect myself to watch knife making videos all the time, it gets boring after awhile, but this guy has so many designs and ideas and i love a little bit angular and sharp designs instead of fluid and organic shapes. Every single piece you make looks amazing. Thanks for the video!

This man has a PHD in Grinder Wheel, never such precise movement with a grinder to remove material. Props to you.

love that you dont put any music on your videos, sometimes i just want to listen to the sound of the machinery while others i might as well put my own music over it, overall a 10/10 video and im so grateful to be able to see videos like this one.

Koss' favorite tool of choice - angle grinder

It is realy satisfaing watching yours videos 😊👍

I love to see J., Ben and David test the strength of the Chisel knife.

I don’t know how much I love the rock tumbler finish, I usually like a blued steel finish. But I love your designs! Good job

Somebody get this man a horizontal band saw.

Something like this would be a welcome addition to my toolbox.

I have always loved this style of blade smithing make me realise the art isn't dead and still lives on

Man I'd kill to have me a nice chisel knife like that. Lol. I love the angular and squared off shape of it instead of just a normal rounded handle. Awesome design. 👌

1:23 I don’t know why but I just found this hilarious *aaaaaaaaaand flick*

This is amazing, but where's the clip I was expecting at the end where you open a beer with that finger tang and sit back to enjoy your creation?

Awesome build! I would like to have seen some explanations on the processes and what they do

Wow, such a unique and cool design! I love it!

I like the design and the finished knife is beautiful. Would have liked to see how it would function with some sort of small strike plate or thickened/widened area at the end of the pommel to facilitate blows with a mallet or the heel of the hand. The current design invites striking it on the pommel to use it like a chisel in a dire situation, but the blow will fall on the thinned metal of that lanyard loop. One can see that creating a thickened, widened area there would have added tremendously to the cost and time involved in making the blade. (Especially true if trying to solely grind it from flat stock!) I suppose it might be most easily done by heating one end of the bar past critical and upsetting the heated metal. It would be important to make sure to anneal it then and get adequate cycles to normalize the steel after grinding, before the quench. After the quench you would need to temper the end much softer than the rest of the tool so it didn’t chip if hit with something metal. Even if one did all that as the “easiest way,” it would exponentially increase the complexity of manufacturing and finishing because the workpiece couldn’t lay completely flat to drill, grind or sand it. Alas, probably far too much trouble! Someone out there might have a better idea. Maybe it would be best to adjust the size and position of the lanyard loop so that less metal is removed and it retains more strength? Again, that’s a beautiful piece. Cheers mate!

I bet its real fun trying to see how far you can push it while still going back to you on the grinder. That was my favorite part besides the finished product great work

I really love the design of this knife!

Nice and clean work! For me it's looks like universal tool for workshop. Keep going!

I am always amazed by the artistry that goes into these designs. Excellent camera work and editing as well. Cheers.

Beautiful tool and excellent video, Thank you my man, I really enjoyed it.

This is such a awesome design for a chisele knife

the stonewash finish really makes that thing kick ass!

Great video! By the way, ATG makes fully dipped gloves, with nitrile covering back side of the glove.

I can imagine Cloud Strife using a knife like this. You should make one slightly longer, with an angled tip and materia slots.

Your grinding skills astonish me , great job

Well, so far I feel like I want one of each Your knives are so cool and functional with the Koss style on each

Ahhhh.....koss... Or some say kosm..... You heard our prayers and made this satisfying video...

The brass handle,cool design, sharpness...this is such an amazing Knife 🤩

wow, so clean and clear. awesome video so satisfying.

wicked looking knife. precision angle grinding work as always

I want it !!! It would be a great tool for your essential survival bag.

The common, uncommonly done...That is the Koss way! Fun with the magnetic holder bouncing along. ;-D Beautiful piece Koss! Easy to keep sharp too. Thanks.

I'd buy one of these. Great work.

If "Cutting Machine was A Pen , then KOSS is the Michelangelo of it !!!!!!"😁😁😁

Nice! Looks like something Syd Mead would draw.

Parabéns, muito bonito!

Awesome work. Never cease to amaze

Wow. You're really good with an angle geinder! Well done, too. Love the knife :)

Très belle vidéo 👍 Le couteau est magnifique très original super pour les plaquettes très bon choix Au top 👍

I enjoy your informative videos on knife making and the use of different materials and tools. You have a technique all of your own and a vision that allows yourself to build different shapes and styles. Thank you for your time to share your talents. If you have a website where you sell your handmade products, I would appreciate you leaving a link that I could visit and maybe purchase a cool knife you have created. Thanks again for sharing. Mitch

Another wonderful piece of work! 👍👍👍

Incredible! A beautiful tool for tradesmen!! If only there was a way to purchase one. That tool is a cabinet maker's dream!

Jawoll DAS ist mal ein richtiges Werkzeug !

Me encanta,es una pieza fantástica y versátil

Masterpiece

Hey that's neat! I just made something similar for myself to make pulling baseboards easier. It has a knife/chisel side just like that for scoring paint/caulking and wedging the baseboard away from the wall. I put a 90* bend at the end of the handle to be used as a small prybar. The handle and finish isnt nearly as aesthetically pleasing as yours though.

Beautiful, dude! Amazing work! 😃 Really well done!!! Stay safe there with your family! 🖖😊

What a beautiful tool 👌

the last step for brass handles is georgeous!! (adam iyi ustada sonuçta elinde makine var)

Beautiful. Amazing work!

Can we all agree that Koss is a Goddamn surgeon w/ a grinder and a cutoff wheel....

You Sir are One of The Best ARTIST I've ever seen !!

I just bought it. Beautiful!

Wow its incredible! Good job from canada 🇨🇦🇨🇦

so amazing. I love what you do.

Really nice and inspiring video! Truly enjoyed and look forward to seeing your next video. Take care and have a lovely day!!!

Very well done, thank you.

Трехсторонняя стамеска с открывалкой под пиво. Прикольно!

Interesting design. I would buy one.

Master piece again. Wonderful knife😍

This is some next level crafting, also it's super beautiful, well done 👍

Coolest knife i've ever seen!

Great work and craftsmanship.

Beautiful piece again. 👍

Awesome informational educational video experience Y'alls God Bless Ya 🙌🙏

I just started watching, but based off the thumbnail I never knew how much I needed one of these!!! Edit: Video was excellent!! Knife looks even better than thought!! 👀 I need one for work!!! Koss, can I order one of these?!?! Exactly like, just a little bigger, with matching brass sheath, and a belt clip! 🤤😅

Man this blade is so clean I want it

That would be a great knife for opening wooden crates or boxes

Really impressive work. Big salute from India

Beautiful tool my man. Excellent video also.

I would love to get one of these 😍🤩

Great job as always. Love and respect your work from Cambodia.

Очень красивая вещь. Браво.

oops what a brilliant idea and the work is fantastic. great job

Now that’s beautiful

Your really good with a angle grinder!

i love chisel knives, so handy

I love the videos and chisel edged knives

Excelente trabalho! Like👍

Have a crkt ringed razel it's spent many hours on my side on multiple freight docks can dig the shape , as a work knife that shape makes sense in my hands

Very nice job! Thanks a lot for share

So satisfying to watch.

Love your work

Awesome informational educational video experience Y'alls God Bless Y'alls 🙌 🙏

Beautiful knife. We shared this video on our homemade tools forum this week 😎

Nice crisp lines👏

A true piece of art

that's nuts man crazy good.

Hello Koss beautifully done good job my friend

thats a badass chisel...id buy it.

its beautiful, good work🔥🔥🔥

Ayy, that's a nice knife! Thanks lots, mate.

This knife design looks so useful, if somebody designed a knife like this to be produced on a larger scale I would buy one

Just a safety tip: dont use any form of gloves while drilling! The worst case drilling accident w/o gloves is that you end a with a chip in your hand or mb cut yourself. But the worst case drilling accident with gloves is that they get caught by drill chuck and you fingers get ripped of your hand. Thats one of the first things you learn in a working environment: If you work with spinning powered tools, dont wear gloves or you risk losing fingers. the best thing you can do is getting a small vise for your drillpress calmp your workpiece and grab the vise at the end of the spindle.

Очень хорошая, а главное, удобная стамеска!

Kardashi knife I like to see you make or the crocodile Dundee knife!!!! 💥💯💯💯💯With the forge process with the glass and iron😎😎man my favorite part.. keep up the best work brother....

Impecable work 10/10

If it only have a handle on one side, you could use it flat-on like a Hultafors chisel. It looks very awesome though. Good work.

gorgeous