Love this!! Pete McMannus did this first thing of my first chemistry lesson and I’ve been hooked ever since!!

Personally I would add a few flash arrestors or one way valves in the hoses to protect the generator from exploding if a flame goes backwards through them.

Super projekt, bardzo prosty a za razem bardzo wydajny...

Excellent workmanship and an interesting project.

folks, this is a Brownian generator. learn more about Yule Brown's inventions and remember that this man led the way.

Using SS threaded rod and with alternating stack of large and small SS washers increased the surface area and reduced the number of chambers required for optimal output. Using lye as an electrolyte gave excellent results. Nicely done btw.

PLEASE put flashback arrestors on this so it isn't a bomb

In fact, I give you 200% marks. Bravo. I'm watching live from Ghana, West Africa. I've been really taught well

a great application of chemistry, top notch creativity, thank you for sharing it

Very informative video as always, I’m always very happy when I see you uploaded a new video! I actually rebuild a few of your projects and they turned out very well!

Very Nice . Now you need a storage system

For anyone wondering, it is safer to use drain cleaner than regular salt, because using salt (NaCl) will split into toxic chlorine gas during the electrolysis.

Thank you for your simple instruction

You can use cigarette filter as flashback arrester because HHO can ignite without a spark inside the tube. This makes a nice mini torch 🔥

Beautiful set up, looks clean

From Pakistan with love Work on next step good and safe way to use . Also define safety measures for a common man

Excellent editing of the video to minimize the duplication of activities.

Thats very good simple HHO generator 👍👍

Cool project. good video!

thanks fo sharing such a great video. How much hydrogen produced from each kg of water? can we also used seawater becuase world is already shortage of fresh water.

Nice job man

Can you power a workshop shed and house with all amenities continuously with this type of design ?

That's very interesting, the next thing that I would like to know is how to separate the hydrogen from the oxygen.

. Great design! It is identical to another process. It's called electroplating. This is when DC current is used to deposit a thin metal coating onto a dissimilar metal surface. This is not necessarily a bad thing but, over time, you will notice that the bolts that are connected to the negative terminal of your DC power source will begin to thin out and eventually disintegrate. This is because electricity, AKA moving electrons, have a negative charge and emanate from the negative terminal of any DC source, battery or mains powered, and migrate towards the positive terminal carrying metal ions from those negative going bolts with them and depositing said metal ions onto the positive going bolts. Even stainless steel is not immune to physics. It's just a little more resistant to the caustic effects of the potassium hydroxide. This trick won't restore damaged threads onto your bolts but one way to extend the life of your electrodes is to keep track of the running time of your unit. Then, at equal intervals, hours, days, weeks whatever, reverse the polarity of your power source. Being that your unit premixes the hydrogen and oxygen gases internally, you will not notice any change in it's function. If it isolated the two gases from each other, then the gas emanating from the vessels would also be reversed. Another way to extend electrode life. Potassium hydroxide is caustic. The alkali equivalent to the corrosiveness of acid. If you remove the electrodes from the solution when not in use and rinse them in plain water, this will stop any chemical reactions. If you buy 4 more plastic jars, you can use the extra lids to keep your electrolyte solution from evaporating. On a different note, being that the 2 gases are premixed within the HHO unit, itself, they are at the perfect fuel / air ratio for a very energetic explosion should a spark or flame source find it's way to the end of an open hose connected directly to the HHO generator. If this happens, it will travel, literally, in a flash like blasting "det cord" right back to those 4 caustic fluid filled grenades just bubbling away at making their own explosive. They will then be showering their maker with a nice, hot, caustic, blinding bath. In essence, literally biting the hands, (and face), that feeds them. As a service to your viewers, I would advise them to build a flash arrester for your unit AND USE IT!!! A simple flash arrestor can be built out of a plastic bottle. Gatorade or Powerade for example as they are very sturdy, 2 pieces of hose and some water. 1) Drill 2 holes in the top of the bottle cap the size of the hoses. 2) Pull a LONG HOSE through the cap to reach 3/4 of the way to the bottom of the bottle. 3) Pull a SHORT HOSE through the cap to reach only 1 to 2 inches inside. 4)Use silicone caulk to seal the hoses to the cap and let set to cure. 5) Fill the bottle 3/4 full of water. DO NOT cover the end of the SHORT HOSE with water inside the bottle. 6) Connect the LONG HOSE to the HHO vessel. 7) Use the SHORT HOSE as the gas source. As the HHO generator produces gas, it will travel through the LONG HOSE and bubble up through the water exiting the bottle through the SHORT HOSE. If a spark finds it's way to the end of the SHORT HOSE, the gas will only burn for whatever the length of this hose, into the flash arrestor and stop at the water's surface. You'll want to use a plastic bottle for the arrestor to allow for temporary expansion during an accidental detonation. A short "POP" in a plastic bottle may make it jump but the same "POP" in a glass bottle will make a bloody mess.

Thanks Bro. Now i know how to make a Motor out of it

Excellent works, very good.

Unique videos as always 👍

I love your system. It is very simple and works great. Thanks for the video!!!

How do you get power to the to the 2 inner jars if you only gave power to the the 2 outer jars if you connected to the longer bars i could see but you didnt

if you place a partial divider (from the lid down to the liquid level) between the anode and cathode and use two hoses from each jar, you will produce separate the oxygen and hydrogen

LOVE YOU PEOPLE KEEP UP THE GREAT WORK !!!

Maciej.. that is so cool!! Polish Power all the way!

Well done girl. Great job. 🤠🍀

How much more/less efficient are the bolts over plants? Comparing gas generation per volt or amps

Fantastic and simply made. Now how will we use the gas? Thank you very much!

Best video thanks for sharing 🌸🌸

The fact that you know how to do this in your backyard is amazing. Thanks for sharing

I used old time tooth cleaning powder for electrolyte , it builds up on the electrodes to protect them . Mine was made with bike spokes & rubber bands in plastic pipe . It would generate by just being in the sun .

I have a question about the wiring, You just need to hook cables on the far end plates? how do the rest get the electricity? As you can see I have no idea about electrical circuits. Thanks.

Great work

Nice and simple 👏🏽

looks solid. have you ever tried welding steel or other metals with the output? would it make gas quickly enough to melt steel pieces together?

Long life and prosperity

we can use bolts to make hydrogen generator, that's awesome

Hello Is it possible to measure how much gas output from your reactor is?

Świetny pomysł. Dużo mniej skomplikowane i tańsze niż tradycyjne rozwiązanie z płytek

Pretty impressive work, Maciej! Fantastic indeed! 😃 Stay safe there with your family! 🖖😊

Excellent, how large would one be to power a generator, or can this be stored for long periods of time, from an apparatus the size you have shown.? Cheers.

ciekawe co dzialoby sie gdyby do stalowego cylindra wpompowac sam wodor bez tlenu, wlac troche wody dodac trocin uszczelnic i podgrzewac. mozliwe ze drewno, wodor i woda zaczelyby reagowac i moze cos w rodzaju palnej cieczy mogloby powstac. to moglby byc ciekawy odcinek. Pozdrawiam!

Does the electrolyte leave a coating on the electrodes? I'm curious. Love this design

In indonesia we put the hose to motorcycle/car air filter when the motorcycle turn on it produce gas to air filter and can make the fuel consumtion less and more economical. *before you do it please use pure distillation water ,it will make the remaining calsium dust from the evaporation of water that is not pure distilled water.

Going to make one for my truck thanks.

Put a flashback arrestor if you don't want the whole thing to blow up.

Nice video like your details 👌

Hi, I hope you are doing great. Thank you for your very easy to understand and very detailed DIY videos. I was wondering have you ever routed the hydrogen gas into an empty brand new propane tank and substituted the propane with hydrogen gas? I was wondering do you think that type of propane tank conversion project is possible and safe with your expertise in making DIY generators? I was wondering did you already take on that project? And if so, can you share the link to your video. In case you haven't tried it. Would you be willing to try it and make a video of the steps involved like you do? Thank you for your genuine contribution in educating people in this amazing area of DIY projects. Hope you prosper in your endeavors. Thanks, Kim

Why were we taught things too complex to teach practical mechanics using science? Education had never led us to think, only memorize. Thank you.

this is creating a mix of hydrogen and oxygen. (I believe it is called browns gas but correct me if I am wrong!) you need to collect the gas from the anodes and the cathodes separately using a divider to be able to get pure hydrogen and pure oxygen.

Great Video // This in series wiring config would be more voltage required for optimum output. Alt parallel connection would require less voltage and pull more current(Amps) which might be better because you can maintain 12V and add more batteries in parallel adding Ah. Since the current is the flow and not voltage. Also in series the system has a higher resistance from container to container. IE if used in automotive or RV application. Also I would make the tubes about 2 inches put the T's center nipple in 2 3 and 4 and run slightly bigger tubes from 1 to 2 to 3 to 4 the out down the center. plus add a fifth jar with only water for flash back protection. Just some thoughts. Also Agree with @Mark Durbin

Nice work

Fantastic 🔥🔥🔥👍👍

Macieju jaka jest wydajność takiego generatora HHO?

How much power does that draw for the Hydrogen you get? I'm thinking of designing a unit to use 5-10 kilowatt input and see how much H2 I can get per day

clean and tidy design.

Bardzo fajnie zrobione sub!

It is a perfect system and effecient good .i like it.

What metal are the threaded studs made of? Doesn't get corroded? What about distilled water?

Seria magnifico que lo hagas en un automobil para que ya no use gasolina. Saludos

Good build i enjoyed this video. Just a though, but May be consider subjecting the electrolyte to external forces such as magnetism, or inside an electo magnetic field, ultra violet light, a vacume during opperation. There is a home scientist in Australia who is getting very interesting results with laser lights aimed directly into the electrolyte with out using toxic hydroxides. He is getting good returns too. Just a thought. Love your work.

How is the efficiency compared to dry cell?

Dzień dobry. Jakie napięcie jest podłączone do tej wytwornicy i jak często trzeba wymieniać wodę i elektrody ? :)

That's good for a basic demo however a single coil electrolyzer only produces Orthogydrogen which is volatile and burns hot causing embrittlement in aluminum block engines (if you're thinking of supplementing your fuel efficiency). You need to build a reactor that has dual coils at right angles to produce both Orthohydrogen and Parahydrogen (burns slower and steadier, and balances the combustion behavior of the Orthohydrogen in the electrolyzer/reactor). Otherwise you have to treat your aluminum block engine with a heat treatment like Ceramizer so you don't pit your cylinder walls or burn through your head gasket. Then the issue of what electrolyte to use.... if you use potassium hydroxide (lye), then you create toxic sludge that has to be flushed from the reactor every so often. I tried, but creating an organic electrolyte costs big $$, more than I had in my R&D budget.... still... it's a fun experiment, and that guy who created the HHO welder version did an impressive job. Good Stuff! 😎👍

Nice awesome concept

E um dos mais prático e funcional será que. Consegue movimentar uma moto testa aí amigo

Bro what do you do with the nasty chemicals after the bolts corrode to death best to use nickel plated

Looks cool, but what can this be used for?

How would you utilize this unit or is it just for show ? How would you put spark arresters in line ? Thanks.

@Maciej Nowak Projects Could you add in about 5% metal dust to see if it works any better?

First time I built one I failed to add a flash arrestor and ignited it within a foot of my face, all I heard after the explosion was a ringing for a solid minute.

Are all the parts you used in stainless steel?

Hi! Is that regular water, or distilled water? Could you explain to mw why pottasium hydroxide is better than sodium hydroxide? I'm asking because I just watched a short video comparing the the two on how fast it would corode an alluminum ball and the sodium hydroxide was much stronger, the aluminum in water sodium hydroxide solution turned black way faster.

Do prądu podłączone są tylko dwa ostatnie sloiki?

woow mas potente que la gasolina!!! y es barato!!, necesitamos ese polvito blanco!!! es facil y se puede adaptar en un motor gasolina 👍👍👍

We make the Future ! Dom

What if we only wanted the oxygen? Can we give it a positive charge and leave out the negative? Or does it require both to do anything at all?

I have a piece of stainless I'm going to chop up and see how much H it will produce. It's 6x36, not sure yet what the best way to divide it is yet but working on it.

Nice 👍

I wonder if he could improve his designs with graphite plates and using a 30% urea solution. Also maybe make it solar powered?

I have done this but if you try what TNT has done and try graphite foil resistance will go down and efficiency will go up. I plan on doing this method at a later time

I've seen someone build a welding torch with this, because it burns extremely hot

Are the bolts, nuts, and washers stainless steel? I have seen other versions of this that always use stainless steel components.

Hi there just wonder what current to expect drawing from battery? I built a small one using caustic soda but my amps are 12 amps

Can you power a motor ?

valla excelente diseño , pocos materiales facil de construir y todo . buen video dan ganas de hacerse uno igual .

Very cool project, you should increase the surface area of the electrodes with flat inox surfaces intersected with one another: This will make your generator a lot more powerful , increasing by an important factor the production of gas. Also a double chamber bubbler (filter) would be optimal for protection of the main chambers, check bubbler on yt and google. Maybe you already know these things but better be the annoying kid than not saying anything. Good luck from Italy 😛

Is there a thermal reaction during the electrohydrolysis of water? That is, do you need to take flasks made of heat-sensitive plastic or not? Thank you!

You have two plus and two minus in the jars on the outside, the upper terminals do not have continuity, how did you do it?

cutting board plastic or would abs or pvc board work?

Does it make enough to run a small lawn mower or weed eater

Made something similar as yours but tryed to use home power electricity. It blew a fuse. Can I use home electricity or only battery electricity?

What would you different to increase the HHO output gas volume Maciej ??? I like the idea with four jars side by side. Maybe more experiments with HHO would be nice.