METAL CONDUIT INSTALLATION: BACK TO BACK BENDS to exact measurement
Переглядів 15,933
День томуAnother essential conduit skill for apprentice electricians learning to install metal conduit systems. Back to back bends to a precise measurement.
======================
🕐 TIME STAMPS 🕕
======================
00:00 Back of bend to back of bend
01:25 200 mm to the back of the bend
01:59 Scrap conduit and a set square
02:37 Tipp-Ex to the rescue
03:01 Is it 90 degrees
03:22 Measure to the back of the bend
04:03 Scrap conduit and set square
04:23 Line up the first bend
05:01 Is the second bend 90 degrees
05:27 Is the back of bend measurement correct
05:57 Remove the twist
06:52 Cutting
07:52 Treading
09:13 reaming
================================
🔦 More conduit videos from eFIXX
👉www.efixx.co.uk/metal-conduit
👉www.efixx.co.uk/how-to-bend-co...
👉www.efixx.co.uk/conduit-instal...
==AD=====================================
Series produced in association with
Metpro - Conduit and accessories
👉 hub.efixx.co.uk/metpro
Bend-it-now - Conduit Bender
👉 hub.efixx.co.uk/bend-it-now
=========================================
📍SUBSCRIBE TO THE CHANNEL eFIXX helps electricians, electrical contractors, building services engineers, and electrical apprentices. So if you've been on the tools for years or just starting your electrical journey, we'll help you stay up to date with the latest regulations and developments in the electrical industry. 👉hub.efixx.co.uk/youtube-subscribe
========================================
⚡️ Take a deep dive into the latest electrical products, applications and technology
👉 hub.efixx.co.uk/essentials
=========================================
🚧 More resources for electrical apprentices and learners
👉 hub.efixx.co.uk/apprentice
=========================================
#efixx #conduit #electrical
@viktor-patricksoki9001 10 місяців тому
Hello. Brilliant series ! Thanks a lot for all the hard work that everyone has put into making these videos. I was hoping we could see a video on a "bridge" set with exact measurements (by "bridge" I mean double 45° up and then double 45° back down - hope I am saying this right.)
@viktor-patricksoki9001 10 місяців тому
ukposts.info/have/v-deo/mYGYZq9-eX2Slas.html
@Alan_AB 2 роки тому
A welder's magnetic right-angled bracket would be ideal for lining up those lines for the back of the bend. No more fiddling about with a set square.
@MrBilly200970 2 роки тому
Great conduit work chaps! Brilliant/skilful......
@DonMorte2 2 роки тому
Video was posted an hour ago. Your comment is from 2 months ago. Go home UKposts, you're drunk!
@seandempsey7351 2 роки тому
Brilliant demonstration as always, guy’s ❤️👍👍👍
@DonMorte2 2 роки тому
Sat watching this on the sofa while the Mrs watches some of her rubbish on the tele. She leans over and asks 'Are they twins?'... I've got her booked in at Specsavers in morning!!
@sethfister7413 2 роки тому
Assuming your pipe bender is level you can put a level on the first 90 degree bend when placed in the “shoe” and level it. This would have avoided what we call a “dog leg” or “dog” in the US. Very handy when putting “kicks” into pipes as well. Interesting to see how conduit bending is done in other parts of the world. My company typically provides Greenlee 555’s.
@danielhearnden3776 2 роки тому
See in the corner all of Gaz’s attempts big pile of conduit scrap 🤭😂
@davidcurry4433 2 роки тому
Spotted that lol, now let's see them make a sledge
@Dibbo1979 2 роки тому
Great video
@islamicinformation3302 2 роки тому
Good information thanks brother
@PaddyMaguire-ek2em 3 дні тому
Hi, just tried your method of bending 25mm conduit for a back to back bend, but it worked out about 2.5ins too long. Tried a 90 deg., bend on a 300mm piece and it worked out at 355mm, what went wrong here ? Thanks DIY man
@ricka5471 2 роки тому
Try that on a hand bender. Would like to see that please.
@acespark1 2 роки тому
You will have that youngster whipped into shape in no time 🤡🐔
@davidhaddow2577 2 роки тому
Where is the tip for the tipex marks
@sparkmeister4706 2 роки тому
Probably on the tipex pen.
@davidhaddow2577 2 роки тому
@@sparkmeister4706 very good how long to think that up?
@sparkmeister4706 2 роки тому
@@davidhaddow2577 10 maybe 30 milliseconds.
@robertboyd4656 Рік тому
All old school ways :)
@cj-rb8fz 2 роки тому
Conduit is miles out still rocks on bench , not checked that inside of conduit it suitable smooth and no burrs inside , conduit does not banged after use to clear any swarth and when checked against template it’s short
@abdulseaforth6930 2 місяці тому
Great videos though. It provided me with the essence.
@robertboyd4656 Рік тому
Still no one uses total length of space cut total of pipe length the split measurement to center of pipe then do offsets if needed then measure from center of pipe and bend then measure from center of pipe to bend on opposite side :) why does everyone leave that out it's super easy super fast and it fits easier just saying only cutting pipe once while its straight with no 90 bends etc geesh
@jambo8442 2 роки тому
Conlok rules
@stevelillis5264 2 роки тому
Anyone can do conlok, no skill set at all..
eFIXX
Переглядів 18 тис.
eFIXX
Переглядів 68 тис.
Фейгин. Смерть Соловьева, арест Шойгу, где будет наступать Россия, штурм Харькова, США нагнули Китай
В гостях у Гордона
Переглядів 363 тис.
eFIXX
Переглядів 30 тис.
eFIXX
Переглядів 52 тис.
How to Bend Steel Conduit to the Correct Measurement from the End of the Conduit to Back of the Bend
GSH Electrical
Переглядів 105 тис.
Inter Link
Переглядів 206 тис.
Creative Passion 88
Переглядів 777 тис.
Tech Electronics BD
Переглядів 2,5 млн