Turn what you HAVE into what you WANT!

День тому

To support this channel consider joining the Patreon. Patreon members get early viewing on new videos and exclusive merch. / almfab
This week I took an 8ft tall bookcase and turned it into a credenza/sideboard/office organizer for the Dream Office. Part of the challenge I've given myself in this Dream Office is to make as much as I can out of stuff I already have. The top is reclaimed Douglas Fir from a salvage yard, I use Patterned Plywood edge banding from a prior video, and the drawers are made from old shelves and scrap wood. I hope this video encourages others to try upcycling. It's a great way to experiment in the woodshop without spending a lot of money.
This channel is supported by Rockler. Thanks Rockler! Rockler Products used in this video include:
Rockler Deluxe Panel Clamps www.rockler.com/rockler-delux...
Rockler Sure Foot Clamps www.rockler.com/surefoot-alum...
Rockler Marking and Measuring Tool Pouch www.rockler.com/marking-and-m...
Rockler Table Edge Router Bit www.rockler.com/table-top-edg...
Rockler PRO LIFT Router Lift www.rockler.com/rockler-pro-l...
Rockler Glue applicator kit www.rockler.com/rockler-3-pie...
BETTER DRAWER SLIDES (don’t buy amazon slides) www.rockler.com/centerlinereg...
Affiliate links to tools and materials used in this video
Totalboat Halcyon Clear www.totalboat.com/product/ halcyon-marine-gloss-varnish. Use code TotalALM22 for 10% off all Totalboat products
ISOtunes Pro 2.0 Noise Cancelling headphones www.bit.ly/almfabiso
Sawstop 36” 3 HP Table Saw amzn.to/3Jo4oEb
Festool TS55 track saw amzn.to/3ylUG0g
Hitachi Crown Staple gun amzn.to/3Iki1UC
23ga nail gun amzn.to/3OTqzUN
Bostich 18ga nail gun amzn.to/3RbJ8EI
Kreg Pocket Hole Jig amzn.to/3AqwdYy
Titebond 3 Wood Glue amzn.to/3AVBgSn
Ryoba Japanese Pull Saw amzn.to/3AVCyN1
Dozuki Japanese Pull Saw amzn.to/3oLY7J7
Milwaukee M18 Palm Router amzn.to/3KrKqZT
Mirka Deros 5” Palm Sander amzn.to/3oKrbR5
Flexcut Wood Carving Knife amzn.to/3CNEbO2
Milwaukee M12 Drill and Driver Set amzn.to/3yYMF2V
Milwaukee M18 Drill and Driver Set amzn.to/3BBhnkk
Armor Tool auto adjusting long reach clamp amzn.to/3QXeZc9
Camera Gear
Sony a6600 Mirrorless Camera - almfab.com/sony-a6600-camera
Cage for Sony a6600 Camera - almfab.com/rig-cage-sony-a6600
Camera-Mount Shotgun Microphone - almfab.com/shotgun-mic
17-70mm f/2.8 Di III-A VC RXD Lens for Sony E - almfab.com/tamron-lens-17-70m...
77mm NXT Plus UV Filter - almfab.com/uv-filter
577 Rapid Connect Adapter with Sliding Mounting Plate - almfab.com/rapid-connect
MT055XPRO3 Aluminum Tripod - almfab.com/tripod
Orion Jr DVC50 4' Compact Camera Crane / Jib - almfab.com/camera-crane
Aluminum Travel Tripod - almfab.com/travel-tripod
MC RGBWW LED Light - almfab.com/mc-led-light
PavoTube II 6C RGB LED Tube Light (10") - almfab.com/pavo-tube-light
Heavy-Duty Portable Tripod Dolly - almfab.com/tripod-dolly
360° Pan Lockable Bearing Mount to 3/8" Tripod Legs - almfab.com/bearing-mount
Tilt Brake for Orion DVC200, DVC210, and DVC250 Camera Cranes - almfab.com/tilt-brake
Jonathan Katz-Moses Wood Movement Calculator kmtools.com/pages/wood-moveme...
Jonathan Katz-Moses video "Is Wood Movement a MYTH?" • Is Wood Movement a Myt...
For project plans and more Alm Fab visit almfab.com
Instagram @almfab / almfab
Pinterest @almfab / almfab
Facebook @almfab / almfab
TikTok @michaelalmfab / michaelalmfab

КОМЕНТАРІ: 228

@colemine7008 Рік тому

Paint the interior the same gold/or green of the wall paper. That would make it look sharp and part of the decor. Or! line it with the wall paper.

@Aleph-Noll Рік тому

would be cool

@WiltonSilveira Рік тому

Madeira pintada na cor ouro ou verde? Não gostei da ideia. Eu escureceria a madeira com uma tinta no tom que me agradasse, mas sempre aparentando ser madeira para valorizar o trabalho de marcenaria.

@rodrigorodrigues5496 Рік тому

@@WiltonSilveira Excelente ideia!!! Madeira no tom certo combina com tudo!

@sgsax Рік тому

The custom moulding is definitely what brings this to the next level. And great reuse of existing materials. Thanks for sharing!

@maxwest4137 Рік тому

I wish there was an annual voting on who on youtube was creative beyond their peers. Some on here are just on another level. Michael Alm, this job was done skillfully and creatively, just like many other items you have been tackling. Very nice job.

@DatSuKid Рік тому

Hope you can make a sit/standing desk!

@bbg-designs8364 Рік тому

If you make a Dado with a regular blade, you can use a drill bit that has the same width as the sawblade, and then if you were to use the stock material, you get a perfect dado every time.

@Blahnik1182 Рік тому

My kind of project. Blue tape for the win!

@berrymand71 Рік тому

This was GREAT timing. I'm currently rearranging/organizing my garage and setting it up for doing more woodworking. I'm getting free old cabinets and shelves off a facebook group and rebuilding it to my needs.

@marksmith9345 Рік тому

Along with the pocket holes [gasp!], safely gluing the top [the horror!], and non-undermount drawer slides [nooo!] I'd like to make one more youtube-woodworker blasphemous suggestion: PAINT. Now, this piece already looks more than amazing and It does add more time/money to the project so this suggestion does slide into overkill.... but it could be fun to try. I must say that I do agree that the inside does look a bit off with that stain on it still. Hindsight is certainly 20/20 and there was no real way to know before having it all assemble. But seeing the end shot of it next to your green wallpaper, I couldn't help but think how great it could look with the inside painted that color. I know, crazy suggestion, but more than reasonable for an upcycle project. And paint these days (no, not chalk paint) is pretty amazing and may not even require any stripping. Love this this upcycle project. You're obviously capable of making unbelievable pieces, but it's not always the case that an heirloom piece is needed. The space where's its going, the time needed and cost of materials just don't add up. Seeing you flex different creative muscles is great. I would love to see more of this from you anytime it's warranted. Check out a channel called ModernMakeover for more upcycling. It seems pretty hard to find people who do this and do it well.

@hansangb Рік тому

You're artistic and woodworking skills are just INCREDIBLE. When you first made the drawer front, I was like "uhhhh, that looks horrible" But of course, proven wrong at the end.

@TotalBoat Рік тому

You've done it again! Love the design, it looks great!

@Mat0s0 Рік тому

I'm getting into woodworking and this is definitely something that gives me motivation to try things! Always looking for ways to up-cycle furniture or any wooden material! I managed to get my hands on larch panels used for ceiling. I cut those to usable planks, sanded them down to their raw material and made a dice tray and plan to make cup or glass coasters!

@eulerizeit Рік тому

I was skeptical about the drawer fronts, I was wrong they look awesome.

@IAmKyleBrown Рік тому

I was curious as well. I think it works because they are inset. They turned out fantastic!

@jeremyspecce Рік тому

Me too, although I do think they interact a little strangely with the interior roundover of the casework.

@thePunisher95125 Рік тому

I agree with upcycling and reusing claiming wood and other materials because it makes so you don’t have spend so much money. In certain theatres we reuse a lot of materials (flats, platforms, stairs, etc.) we don’t have to spend so much money when building flats, platforms, stairs, etc. and it also saves us time. Some theatres need slides for when cutting materials and they definitely need planners.

@fieldofteames6310 Рік тому

That turned out awesome. Great video

@fiercegirldesign1 Рік тому

I love these types of projects. It’s so cool to see what you come up with by repurposing/upcycling. Beautiful work, as always.

@Blindauer717 Рік тому

I absolutely love your work. I am envious of your creative abilities.

@AngieWilliamsDesigns Рік тому

I absolutely love this project. I love that you upcycled a book shelf to make what you needed. And it doesn't look "hacked". It looks great. I love it!

@167curly Рік тому

It's always good to economize with todays' lumber products' prices, Michael.

@mcheddadi Рік тому

my man with the custom keyboard 👌

@user-iv8xk1vn9e Рік тому

I’ve been rewatching this video. It has helped encourage me to take on my most challenging repurposing goal yet, building drawers. Thank you for the work you do.

@buffalojones341 Рік тому

Looks like you designed it from the ground up with new materials. Beautiful!

@Usonian7 Рік тому

I love the way all the round over details work together

@jeremyspecce Рік тому

I think to help your chances with the glued on top I’d cut some grooves length wise on the underside to give some dead space to absorb some expansion if needed. That being said, you’re building this in the summer so I guess you will more likely experience some shrinkage, so those grooves might actually be a place for cracks to start. So maybe my idea is dumb, just putting it out there for people to consider and weigh in on if they want.

@meperson Рік тому

That is great video and upcycling project. Thanks!

@espnmk Рік тому

vintage look with a modern twist I really like this piece great job keep up the great work, and thanks for sharing. Happy Holidays...

@nehemoth Рік тому

Can't watch your videos without thinking that you are Peter Sarsgaard's doppelganger, incredible the resemblance.

@alanr745 Рік тому

Turn one of the book shelves on their sides with backs facing and join them together. Add whatever storage on each side to make it look like a desk, and then add another waterfall top and you'll have the desk needed along with it matching the shelving cabinet you just (awesomely) made. Just my thoughts. Nice work Michael! Using scraps of the endgrain ply was genius!

@robwgeorge Рік тому

Upcycling rocks. I turned a broken sleigh bed frame into a patio bench. Love your content!

@williamellis8993 Рік тому

Looks great, Michael. Did you forget the Shaun Boyd 1/8" drill bit trick? Bill

@adrianwilliams763 Рік тому

Great to see materials up cycled rather than end up in the landfill. Nicely done.

@lDanielHolm Рік тому

2 mm movement seems like a lot, though. I hope you don't end up regretting that glue-up! The cabinets certainly _look_ awesome as hell. (Though they'd look even better without that stain on the inside, but hindsight is 20/20 and all that.)

@theelmagoo Рік тому

I love this series, great ideas for upcycling!

@MCsCreations Рік тому

Beautiful work, Michael! It really turned out amazing!!! 😃 I don't know what you're going to do with the other part, but I'm looking forward to see it! Stay safe there with your family! 🖖😊

@RPO6464 Рік тому

Wow, absolutely beautiful.

@dannyoktim9628 Рік тому

I have up-cycled all my life, I find it more challenging then building from a plan. Great rework of what might of become trash.

@DickvanZanten Рік тому

Nah, those tops'll hold just fine. Now of you were in a tropical environment or somewhere like japan with its huge changes in moisture over the seasons it'd be another case entirely.... Love the way you use that leftover material for upcycling. Great job!

@yunglynda1326 Рік тому

love it!! would love to see more upcycling projects from ya!! ty for sharing!

@mathieugenoino4462 Рік тому

Loved the straw trick!

@CarlosFernandez-lr3uc Рік тому

Dude Real craft!! I have a passion on turning scraps, the things already have or the things nobody wants to something useful and nice looking. Good stuff dude!

@ModernRemade Рік тому

Dang Michael! That’s up-cycling done right! Amazing work as usual. Gotta love that pattern ply detail 🙌🏼

@makernova8160 Рік тому

Nice work! I like the drawer fronts and the patterened plywood for the edges was an unexpected but great looking touch!

@richvanmeter8298 Рік тому

I LOVE the idea of upcycling, especially right now with prices of everything so high. I couldn't agree more that it's a way more approachable starting point than jumping into fine furniture making.

@DaDunge Рік тому

Sure but all these channels use loads of equipment and tools most people won't hav access too.

@sol_in.victus Рік тому

@@DaDunge I mean... are they supposed to use worse equipment just to show people that it's possible. They make this for a living of course they're gonna invest in good tools

@MichaelDinsmore Рік тому

Nice reuse and keeping things out of the landfill. I like the strong grain of the Douglas Fir you used to accent the piece too!

@guybowers9094 Рік тому

Very nice, what a great way to repurpose the material

@Avoh_ Рік тому

Great work. Also love the TKL and numpad you put on there at the end, I am also a keyboard nerd!

@HLR4th Рік тому

It will be interesting to see after a few seasons + use if glueing the top and sides will be stable long term. I hope it is, a beautiful piece and a wonderful video!

@johnstone9396 Рік тому

32 seconds in and heard the term "upcycled", that's all I needed to hear.

@codylee2818 Рік тому

I love those patterned plywood edges!

@matthysloedolff Рік тому

Great video, Michael! This is the kind of up cycling I like. I am so tired of people (horribly) painting a nice piece of furniture and calling it up-cycling. This gave me an idea of what I can do with some of the old and broken furniture around my house.

@codacreator6162 Рік тому

That’s so badass, I don’t even know where to begin. Thanks for inspiring woodworking!

@bradleytuckwell4881 Рік тому

They turned out great. Your office is really coming together. It’s so nice I got a feeling you’ll be hanging out in there a lot.

@kamtanzzz Рік тому

Thanks for the ideas

@karulach Рік тому

Wow. It looks amazing, Michael. The final look is really great. All the details are making this furniture fit to your office. Can't wait more projects like this. Greetings from Poland ;)

@gregmize01 Рік тому

Awesome! Those drawers turned out great!👍

@jewdd1989 Рік тому

I absolutely adore this project! Wouldn’t know plywood is underneath all that glorious fur! I especially love the repurposing into something entirely brand new and the customization. Btw I’d love to see some custom tambour shelving above to go with this but really anything works

@wretchlikeme5321 Рік тому

I recently turned two beds no longer needed, that no-one wanted and, made shelves, drawers for my shop. I saved all the screws and made two cross stitch stands and scrolls for my wife. Saved at lot of money. I will be watching out for unwanted furniture during spring cleanup.

@andrewbrown8148 Рік тому

Great up-cycle project, Michael~!

@woodandwheelz Рік тому

I have an idea for the other 2 bookshelves, I'll be by this weekend to pick them up. LoL! This project came out great. I have a few bookshelves that could be repurposed but they are made entirely of particle board with that paper veneer to make them look like wood. It's still doable though. I've turned several into shorter book cases in the past. This project, and honestly all of your projects, is very inspiring. I've actually thought of putting a patterned plywood band around my office. Kind of like you would do a chair rail but higher. More like chest height. Thank you for all you share and teach. God bless.

@pauldent3059 Рік тому

I love them they look 70s. A nice bit of tambour would work well, maybe on the others and I wouldn't worry about the wood movement I do it all the time here in the UK and find that the ply absorbs quite a bit of the movement itself

@billybike57 Рік тому

Great job and A+ for repurposing an existing piece of furniture!

@JTWoodworks Рік тому

This turned out great! I love the look of the drawer faces

@MichaelAlm Рік тому

Thanks dude 🙌

@spencerbass7142 Рік тому

That turned out very nice.

@Sewcialitecrew Рік тому

Wow this was fantastic!

@melfindshershelf Рік тому

When i saw pattern plywood on Wrymwood's DM screen kickstarter, I knew for sure it was made by you, but I don't use DM screens for my games or campaign to put it to good use. So I really hope there will be pattern plywood dice trays in the future. Will be very proud to own a Michael Alm's item that I can use frequently. The fact that you also create everything, with mindfulness to daily usage, I will be very proud. :) Thank you for your videos.

@gpetesr Рік тому

Looks great Michael

@benjaminmilliken1344 Рік тому

I would recommend the blum undermount runners, u can't see them from the side so u can have a cleaner edge on the draw boxes and they are easy to fit and adjust as well as being able to take the draw out as it clips in place underneath and plus they have a smooth soft close and are really durable

@seanwhitaker975 Рік тому

Looks great!

@VladislavCantea Рік тому

it looks great

@benjaminfarthing3849 Рік тому

Wow that looks nice

@DaDunge Рік тому

Love these channels about saving money on materials while using equipment that probably costs as much as a house.

@FrancoisTerblanche Рік тому

Wow! Just wow! 👏🏼

@LMCFootball Рік тому

Great work Michael!!!

@TeamDivaRealEstateSeattle Рік тому

This is so relaxing to watch!!’

@emanuelbrunsonjr4463 Рік тому

Great project!

@StuartGeers Рік тому

This is like an artsy Matthias Wandel project but with pocket holes instead of a pantorouter

@BourbonSauced Рік тому

I think matching upper cabinets out of those bookshelves would be a great addition.

@jtsholtod.79 Рік тому

You should have asked Rockler for some Bandy Clamps™ for all that edge banding!

@MichaelAlm Рік тому

I was worried if I included them I’d reach critical levels with my Rockler clamp collection 🤣

@ericpjlanglois Рік тому

Add the same wallpaper to the inside of your bookecase. Or one of the colors in the wallpaper and paint the back panel. I will look great.

@MicKis173 Рік тому

I would use One of the remaining cabinets to make a coffee/tea bar (whatever is your poison) Maybe with the upper part in a tambour fashion It would be nice to have refreshments wherever you’re working 😋

@atomicdetailsoc Рік тому

You have very nice tools.

@richfmatos Рік тому

A simple plastic straw to clean glue: you get my inscription!

@RedBudRed Рік тому

Looking good. Love the details!

@Craftlngo Рік тому

This cabinet is a total conversion of the original furniture. Unbelievable how much you've been able to change the look of it! Your fellow kolleague _Neil Paskins_ has built Kerf-Makers for exactly the situation you've been in here with cutting the dado in the Front- and Back-panel. It's a two-piece jig with an adjustable screw for taking the blade-thickness into account. With this screw you're also able to adjust the width for a bit of play. I think it could help you in future projects

@dojifly Рік тому

Hey, I was able to buy some plastic straws and they do serve well for glue squeeze out.. I cut the straw at an angle and found it to be the best tool I have purchased this year. Thanks! Love those drawer fromts..

@HarryLovesRuth Рік тому

If you have any small people in your life, the kinda useless straws that come on juice boxes are a great upcycle source. They even have a precut angle for stabbing.

@samtownley9019 Рік тому

I like how the beading on the drawers makes them look like tambour doors

@ellieboa Рік тому

Love this!

@Asianwaste Рік тому

Hot damn those clamps are amazing.

@SpencleyDesignCo Рік тому

loved the upcycling michael! keep up the great work man!

@MichaelAlm Рік тому

Thanks Eric!

@Kkuts37 Рік тому

Superb!!

@cz2301 Рік тому

Tuen what you HAVE into what you WANT - provided you are a carpenter and have all the equipment and knowledge.

@Luqman899 Рік тому

just the fact that you gave the metric value earned yourself some respect points, thank you for that. 19:06

@melissaschaefer854 Рік тому

I love it!!

@nonehandle688 Рік тому

This came out great.

@noobFab Рік тому

Trash to treasure! A really great build for those on a budget, but the look is also amazing! Visually cohesive, those bevels really do add a custom feel, like you said.