New Use for Raspberry Pi Pico W -- ESPHome and Home Assistant!

  Переглядів 23,447

mostlychris

mostlychris

День тому

Install ESPHome on the Raspberry Pi Pico W. Integrate it with Home Assistant to start using it with your smart home.
Links:
-- ESP Board Playlist: • ESP
-- ESPHome: esphome.io/
Support this channel by becoming a member:
/ @mostlychris
Discord: / discord
If you would like to support me:
Buy me a beverage: ko-fi.com/mostlychris
Become a patron: / mostlychris
Products I reference in my videos (contains affiliate links)
www.mostlychris.com/my-smart-...
My Website: www.mostlychris.com
DISCLAIMER: Some of the links above take you to affiliate sites that may or may not pay a small commission to me. It doesn't increase the cost to you, but it does help support me in making these videos.
Want to send me something? Send it here!
Mostlychris
24165 IH-10 West
STE 217 Box 164
San Antonio, TX 78257
#HomeAssistant
#homeautomation
#raspberrypipico
00:00 Intro
00:44 Install ESPHome Dev Version
01:19 Add New Pico W Device
02:49 Download Install File
03:25 Install ESPHome File on Pico W
04:55 Example Dallas Temp Sensor Install
06:43 Dallas Temp Sensor Config
09:00 Add to Home Assistant w/ API Key
10:25 What is ESPHome?
12:52 Final Thoughts

КОМЕНТАРІ: 39
@askmahesh
@askmahesh 2 місяці тому
This is one of the best videos I have seen recently. Very easy to follow.i liked the way you convinced (at least me) to subscribe.
@Mister.BreadBoard
@Mister.BreadBoard 7 місяців тому
Amazing videos thank you
@Dusty_Ham
@Dusty_Ham 3 місяці тому
This is very helpful thank you so much for this!
@ronm6585
@ronm6585 Рік тому
Nice! Thank you.
@mostlychris
@mostlychris Рік тому
Yw
@TheFlatulentCow
@TheFlatulentCow Рік тому
The LED on the Pico W is connected differently to the original Pico. It does work it just requires different code. There is a post on the RPI forums about it.
@mostlychris
@mostlychris Рік тому
Ahh..that makes sense. Thanks for the update.
@arnoldbencz6886
@arnoldbencz6886 Рік тому
Super video!
@mostlychris
@mostlychris Рік тому
Thanks!
@g0dh8r
@g0dh8r Рік тому
Cool stuff! Thanks!!!°
@mostlychris
@mostlychris Рік тому
Thanks for watching.
@arghyl
@arghyl Рік тому
Great video! I had some picows laying around and decided to test this too! I was used a Pico-LCD-1.3 by Waveshare and patched together date, time output. The HAT has buttons so I'm chipping away at some sort of function for them maybe turn off lights or fans. I read in an update that there's the option to build functional menus in ESPhome but I haven't tried it yet. I'm curious to see what you will do next.
@mostlychris
@mostlychris Рік тому
Perfect! Wondered how many Picos are out there waiting to be used.
@MrSupersidewinder
@MrSupersidewinder Рік тому
Very cool❣
@mostlychris
@mostlychris Рік тому
Thanks!
@FreddieMare
@FreddieMare Рік тому
Great video thanks, I have a question all my devices is based on pi pico w's but I'd like to get esp_now working on them if you can make a video on esp_now on pi pico w sure you will give grate insight, thanks again for all you share
@mostlychris
@mostlychris Рік тому
Thanks for the idea. I'll add it to my video list.
@faizannazir5596
@faizannazir5596 Рік тому
can we add R60ABD1- Respiratory Sleep Radar Sensor with pico to esphome?
@arnonaf
@arnonaf 2 місяці тому
Will the pico W settings work if I'm using older pico with ESP-01s wifi board for the wifi?
@studiomonty
@studiomonty 24 дні тому
What's the difference between using ESPHome (and read that data from my Rpi4), or hooking up a sensor straight to my Raspberry Pi 4 pins?
@roystervi
@roystervi Рік тому
His can you or any viewer verify that "platform: adc" and "platform: pluse_counter" works on the pico W with esphome? Am getting error when trying to add these sensors. maybe something am missing. they work fine on esp32, d1-minin and nodemcu's TIA
@DonParlor
@DonParlor Рік тому
Hello Chris, I would be curious to know what you suggest for someone that needs to buy new microcontrollers for an ESPHome project. Would you recommend going for an ESP32 or Pi Pico W ?
@webcompanion
@webcompanion Рік тому
I would say go with ESP32 for now if you really NEED something to work... it's been around a lot longer. But for tinkering on the side, go with Pico W and see what new features the devs come up with. It should be fun
@mostlychris
@mostlychris Рік тому
I'd go with what John W says.. ESP32 has been out there longer. Pico W might be overkill and not everything that works on the ESP32 works on the Pico...yet.
@Tntdruid
@Tntdruid Рік тому
A nice site for Esphome stuff are ESPHome Device, can't type URL here.
@mostlychris
@mostlychris Рік тому
Thanks for the tip.
@brantwinter
@brantwinter 4 місяці тому
Let’s hope they get MQTT included soon. Useless for me until they do.
@Bikes-with-Ben
@Bikes-with-Ben Рік тому
My preparing download for the install has been stuck for 20 mins now. I'll let it keep trying, but I was suprised I didn't see anyone else here with similar issues.
@Bikes-with-Ben
@Bikes-with-Ben Рік тому
So, I uninstalled the ESPHome (Dev) version and installed the standard ESPHome Add-On. This fixed my download issue, took maybe 3 or 4 minutes like you say when I did that.
@zyghom
@zyghom Рік тому
am I drunk or your example of temperature sensor does NOT show temperature? ;-)
@mostlychris
@mostlychris Рік тому
I thought it did. I guess it depends on where in the video you are talking about.
@zyghom
@zyghom Рік тому
@@mostlychris you are COMPLETELY right - there was a reading at around 7:00 - in the log browser - but it was - yeap, I might have been drunk then ;-)
@zbigniewloboda3393
@zbigniewloboda3393 11 місяців тому
1:07 Install??? On what????🤕
@mostlychris
@mostlychris 11 місяців тому
Install ESPHome from the add-on store in Home Assistant.
@jmr
@jmr Рік тому
Seemed easier on an ESP8266. I don't remember even needing a resistor for that sensor.
@supperka2
@supperka2 Рік тому
for dallas senzor is resitor very recommended. if you have tasmota on esp is actived intern pull up resistor.
@mostlychris
@mostlychris Рік тому
I've used the resistor on the other ESP boards. In fact, I watched my other video to remember how to use the dallas sensor on this one.
@jmr
@jmr Рік тому
@@mostlychris Perhaps I was supposed to but didn't. 😂 Mine are definitely direct wired because I just checked. I have two of them on there.
@jonneymendoza
@jonneymendoza Рік тому
You can just use the breakout garden and use a BME680 breakout on it
Turning a Raspberry Pi Pico into a GPU!
16:42
element14 presents
Переглядів 98 тис.
Что будет с кроссовком?
00:35
Аришнев
Переглядів 2 млн
Сын Расстроился Из-за Новой Стрижки Папы 😂
00:21
Глеб Рандалайнен
Переглядів 3,8 млн
ESPHome on Raspberry Pi Pico W
8:01
BeardedTinker
Переглядів 18 тис.
The little sensor that does it all! ESPHome and Home Assistant Ready!
22:53
Linptech ES1 Presence Sensor: Best Home Assistant accessory
5:51
Tricks And Things
Переглядів 1,1 тис.
3 HACKING gadgets you have to TRY!!
19:34
NetworkChuck
Переглядів 1,4 млн
Smarter than a Smart TV! (Raspberry Pi Inside)
9:10
Jeff Geerling
Переглядів 1,9 млн
No Pi? No Problem! Home Assistant on a Cheap Thin Client
14:58
This Smart House
Переглядів 66 тис.
HOW TO -  Create a Raspberry Pi Smart Home Kiosk (Home Assistant)
17:56
Mark Watt Tech
Переглядів 129 тис.
Raspberry Pi Pico LCD Projects
17:25
ExplainingComputers
Переглядів 97 тис.
10 Amazing R-pi Zero projects to try in 2023!
7:50
ToP Projects Compilation
Переглядів 219 тис.
How to Run Linux on an ESP32
18:53
element14 presents
Переглядів 143 тис.
Как установить Windows 10/11?
0:56
Construct PC
Переглядів 1,4 млн
It's embarrassing how much I like this thing.
12:19
Linus Tech Tips
Переглядів 878 тис.
Клавиатура vs геймпад vs руль
0:47
Balance
Переглядів 516 тис.