HOW TO - Create a Raspberry Pi Smart Home Kiosk (Home Assistant)
Переглядів 128,238
День томуIn this video I run through the process of setting up a Raspberry Pi kiosk for Home Assistant. I'm using the Sunfounder TS7 Pro kit in this video but the process will work for any connected screen or touchscreen for the Pi.
A smart home kiosk is a great way to glance at info and interact with your smart home.
Grab yourself a Pi, Grab a Touchscreen and give this a go!
Although I'm using the TS7 Pro, this video is not sponsored or related to Sunfounder.
▬ 🎥 VIDEO CHAPTERS: ▬▬▬▬▬▬▬▬▬▬▬▬▬▬
0:00 - Intro
0:17 - Todays Video
0:19 - What is a Kiosk?
0:49 - The TS7 Pro Kit (You can use any - doesn't need to be this one)
2:20 - Other bits of needed hardware
4:00 - Quick look at the TS7 Pro
4:50 - The Pi Imager
5:04 - Flashing our SSD
6:57 - SD Card Flash (SSD users only)
7:23 - EEPROM Update (Bootloader change)
8:28 - Commands to setup our Kiosk
13:51 - Home Assistant on the Kiosk
14:53 - Some Kiosk tips for Home Assistant
15:35 - Issues with this Kiosk
17:17 - Summary
17:41 - Outro
------------------------------
🙏Support my Channel - Become a PATRON🙏
Consider supporting the channel by becoming a Patron. Any and all funds go into creating new content and bigger projects.
► / markwatttech
Alternatively Support my channel and get access to exclusive perks:
/ @markwatttech
▬ Handy Video Links ▬▬▬▬▬▬▬▬▬▬▬▬▬▬
My GitHub (Code and Commands you need)
github.com/MarkWattTech/MarkW...
____________________________________________________________
▬ Products In The Video ▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Sunfounder TS7 Pro Kit
amzn.to/3AMGwHQ
Sunfounder T7 Screen
amzn.to/3CzgQ2F
7inch Pi touchscreen
amzn.to/3TkBM3y
Electrw Pi Touch screen
amzn.to/3RbidbL
Fire HD 10 Plus
amzn.to/3R9Q7xG
Raspad
amzn.to/3pMVUh3
Startech USB to Sata
amzn.to/3QVdwDc
Kingston 240GB SSD
amzn.to/3dO6C42
SanDisk A2 SD card
amzn.to/3pTHuLX
Pi PSU (Official)
amzn.to/3ARDLFk
Sonoff NSPanel
amzn.to/3CBcEzs
The NSPAnel Pro
itead.cc/product/sonoff-nspan...
____________________________________________________________
▬ My Previous Videos ▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Create A Smart Home Alarm panel
• Create Your OWN Alarm ...
NSPanel Pro
• The Not So Pro - Smart...
Want another way to Kiosk a HA display? Check out casting
• Cast Your Lovelace Das...
My video on the NSPanel
• A Perfect Touch Screen...
____________________________________________________________
📣FOLLOW ME ON SOCIAL MEDIA📣
Follow me on all of the places for exclusive insights and updates:
👤 Facebook: / markwatttech
👤 FB Group: / 2963936147172102
📸 Instagram: / markwatttech
🐦 Twitter: / markwatttech
► MarkWattTech Sub Reddit :
/ markwatttech
▬ Buy Me a Coffee ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
☕ Found my content helpful?
Any and all funds will go towards helping improve future content.
Plus there are an extra few perks to becoming a member.
☕ If your interested check it out :
► Buy Me a Coffee:
www.buymeacoffee.com/MarkWatt...
------------------------------
🎵 Track Info:
Title: All That
Royalty free from : www.bensound.com/royalty-free...
My Music Used : www.epidemicsound.com/referra...
(Use my link for a free Month)
------------------------------
#raspberrypi #homeassistant #kiosk
@odhiambo0 Рік тому
I sure would like to see the other kiosks that you have used and how you've created your dashboards. Thank you for yet another great video.
@marnixmeersman9587 Рік тому
Really great tutorial. Love how you adress everything, without any BS.
@MarkWattTech Рік тому
I appreciate that! :)
@pjguibord Рік тому
Moving into a new home, this is going to be perfect!!
@McPhailHunt Рік тому
Worked perfect with an elo touchscreen monitor. Thank you for a great video and tutorial.
@stevehealey2473 Рік тому
This was great Mark. Thanks!
@neekster28 Рік тому
I would love to put a few of these around my house and run Room Assistant on all of them. That would be sweet!
@QuickLaughsExclusive Рік тому
Hey! Thanks so much for this video!
@Sossingro Рік тому
Haven't finished the video yet but running this and room assistant could work pretty nicely if using multiple ones, would be a good follow up video!
@hioctane9318 Рік тому
Dear Mark, thanks for this video. Just completed and working. One tiny thing, i couldn't get it to boot properly unless i selected "Desktop autologin" from raspi-config. Again, excellent video and glad i can avoid paying for something like the kiosk browser. Keep up the great work.
@MkmeOrg Рік тому
Great instruction
@matiasmiguel818 Рік тому
Thank you very much for this video! Have you tried streaming from a camera connected to the kiosk and gpio ports? I can't find how to do it.
@xris2394 7 місяців тому
Do you have a tutorial for running HA on the same Raspberry Pi, I have a Pi4 8GB? Thank you for your videos
@RaphaelMaunier Рік тому
I love the way you present your project , they are all well explained and detailed ! I will give it a try just for fun. I was looking to buy a tablet and put it on the wall, I will use this project to be my « pre-prod » and then use a tablet later on the wall. Maybe more fun with this and I’ll go direct with a 24 touch screen ^^
@MarkWattTech Рік тому
Thank you! Really appreciate the feedback. I’m glad you enjoy the presentation style. I think wall panels are great and I use a couple in my house. This little screen fits well on my desk but I have a plan to embed it in a Kallax unit (maybe a future video 🤪). Deffo a fun one to play with :)
@RaphaelMaunier Рік тому
I already have some Ethernet switches hidden in some of my walls with some displate (metal poster) in front of the metal plate. This is giving me some ideas. Just need to find a hack to shutdown the screen ( same as the sonoff ) and then you can have a more powerful devices in each important area that is not just an intel nuc hidden somewhere
@talalbinsalman1245 Рік тому
It is a great project, worthy to try it, but it won't work and Home Assistant will never loaded in the screen. Slight details are still missing in the video.
@calendil Рік тому
Thank you for the video, I installed HA from etcher with its default like. my hardware looks similar to this, is it possible to get to the screen from terminal? thank you
@HerwinHerwin 10 місяців тому
Hi Mark, thanks for this video. I'm thinking of doing this project and i have a noob question; i'm wondering behind the reason of disabling the dpms and screen blanking? Thanks.
@talalbinsalman1245 Рік тому
Hi Mark, I have the same issue David has stated below. I sat everything up correctly but home assistant never accepted to load into TS7 pro touch screen 'the kiosk' at all. I have repeated the setup over 3 times but with the same issue. Glad if you provide us with further steps and clear guidance to resolve this issue.
@HousewerkRecords Місяць тому
Dude I’ve been looking everywhere for a video that does exactly this. Got my kit on the way. I saw another video where a guy just plugged in an external ssd but I’ll probably go for the Nvme approach looks tidier. 😊 Thanks for this vid. I’ll be back to follow along. Cheers
@timeforrice 5 місяців тому
Great video!
@MarkWattTech 5 місяців тому
Glad you enjoyed it
@Kaputznefreble Рік тому
Man.. I love you!
@iainhay2823 Рік тому
Another great video. Thinking I should sell some of my spare pi
@MarkWattTech Рік тому
Sitting on a gold mine haha
@bunnybiteschannel413 Рік тому
Hi Mark. Love your video and content. Can you do a video about esphome ir remote climate? Step by step for dummies like me.
@jovs1407 Рік тому
Hi man. Very good job explaining this. It's now working fine for me. Only thing i want to see changed is how to hide the side scroll bar. I know it's in your instructions , but that's for the 7 inch touchscreen. I'm using a 15 inch hdmi screen. So can you please explain me what i need to do?
@hilly20111 Рік тому
Got it up and running straight away thank you. What would be the process in adding pinhole to the kiosk pi?
@MarkWattTech Рік тому
Glad you got it working :) For Pi Hole or other services you could just install them as background services.
@TheGamingArt Місяць тому
I've rarely seen this approach with the open box configs work out of the box, including with this setup on a fresh RiPi 5. Curious why not use sudo nano /etc/xdg/lxsession/LXDE-pi/autostart which should always work out of the box?
@maxdsm2569 Місяць тому
Ok, beautyfull guide, thank you, but, is there a way to add video output, not just a terminal on a home assistant device (pc or raspberry with HAOS)? My target is use only one device to monitoring my home an show it on a display. Thanks
@JSmartHome Рік тому
Hello, very good video as always. I have a Raspberry Pi 4 running on an SSD and I would like to know, what should I configure if I decide to buy this display? I hope I have made myself understood. Thanks in advance. Regards from Dominican Republic.
@woland783 Рік тому
Hi mark, thanks for the video. Can I ask you how did you set the width of the columns of your dashboard so that the two columns are not split 50% each? Thanks!
@MarkWattTech Рік тому
Thanks dude. That dashboard is a nice and simple one and it’s actually part of standard HA. It’s just an alternate dashboard view type called sidebar. It’s the same one that’s used in Energy Dashboards.
@unimatrix726 3 місяці тому
Amazing. I have done this with a 15 inch touchscreen and works wonderfully. The only thing that I have a question on now is how to setup a screensaver. On my kindles that I use Fully Kiosk Browser on I can put on a screensaver with a slideshow of pictures. How can we do that on this?
@cheze_bun 2 місяці тому
i would search on google or on youtube as a lot of people cant be botherd to reply to youre comment
@SudeepSinha33349 Рік тому
Great tutorial but I still want to know procedure on home assistant to shutdown remote pi using shell command.
@davidtakacs4596 6 місяців тому
How can I edit the whole menu system to my own? Is there any program like squareline studio or lvgl? I would like to make a GUI for a terrarium (temperature, humidity,light, co2 control). Thank you :)
@xbmcnut Рік тому
Another awesome video Mark that will see my tied up in the lab for another 3 days! Would you mind sharing your code for the shell command that reboots a Pi?
@MarkWattTech Рік тому
Thanks Peter. It’s a fun little project with lots of possibilities. I will add it to my todo list for the morning and update you when it’s done 👌🏻.
@xbmcnut Рік тому
@@MarkWattTech Thank you. I've wanted to periodically reboot a Pi from HA but it's always stumped me.
@MarkWattTech Рік тому
Hey Pete. I've just updated the GitHub file for this tutorial. It's linked in the description. I've added the command and also found a written guide (linked in the document) for the process which will give more info if you need it. If you need anymore help etc give me a shout and I'll do my best to get back to you. Cheers.
@xbmcnut Рік тому
@@MarkWattTech Legend Mark, thank you!
@bern047 Рік тому
Hi Mark thanks for the great video, I have the Raspberry Pi official 7 inch display could I use that for the project? I didn't want to spend any more money and have yet another monitor, please let me know if this is possible? and anything I need to know to get the Raspberry 7 inch screen to work correctly, thanks for a great looking project
@MarkWattTech Рік тому
Heya :) This should work with any touchscreen setup. Deffo best to make use of parts than buying new ones :)
@matthewmalpeli Рік тому
What I'd like to see is a smaller form factor, like an iPod Touch to mount next to bedroom doorways. Ideally, it would have an ESP32-WROVER running ESPresence for room tracking and squeeze-lite for network audio. The minimalist Home Assistant companion app would be perfect for this kind of device. I was hoping to pick up an Android iPod Touch clone cheap but not even Apple are making one anymore 😭
@Intimidator443 Рік тому
a Sonoff NS Panel can help you out with that!
@JasperJanssen Рік тому
I feel like a 50-80 dollar phone might be a better option in many ways for the sort of things a small control panel would be used for. Keeping control panels and sensors separate as much as possible feels better to me than integrating them into a single monolithic system, even if that system is modular. If you can 3D print whatever case you want, you can always make room behind the phone for an ESPhome, or even a pi zero, doing whatever you need to do in the sensor range.
@MaxStanglmaier Рік тому
Has anyone a idea how to rotate the display & touch interface on a connected generic touch screen? And thank you mark for the absolute detailed instructions
@MarkWattTech Рік тому
Heya :) for screen rotation you will need to add a little accelerometer. You can get one for the gpio pins. This will allow you to rotate the screen and have it automatically switch orientation. Originally this vide was actually on 3 Diy Kiosks and I actually show that but it was super long 🙈.
@MaxStanglmaier Рік тому
Setup everything with your guide yesterday. And it does seem to be more responsive than my previous Ubuntu desktop approach (no surprise there). A quick little section at the end of the video for bonus fancy features would be cool. Personally I don’t mind longer videos as long as they are structured. As for rotation I managed to rotate the picture via ssh but I still have to find a way to rotate the touch method with this installation. It’s hard to find because most instructions reference the old method with rp3s and older.
@CrankyCoder Рік тому
Hahahahaha he said "depending on the pi you get..." LOL
@marksi7034 6 місяців тому
Is it possible to modify the NSPanel using alternative software so that it can display information from the Homeassistant dashboard from the PV infenter? I would like the NSpanel to display information about the battery charge status and current power?
@humzakhatri7085 Рік тому
Those Chinese android panels people are installing in their cars is just about perfect for this, they don't have a battery, so you can power them directly and the have convenient mounting points as well, they even come in different sizes, heck you can even run a speaker system if you want.
@ViajeroAstral 4 місяці тому
Worked at the first try! Thanks a lot! Only issue I have is that the screen has a very low response with the touch imput, I have to apply a lot of pressure to it to detect anything and it's almost impossible to scroll on the screen.
@MarkWattTech 4 місяці тому
Glad you got it working :) Which screen did you use?
@davidcampulka1610 Рік тому
Hi. Great video. I just have a minor problem with that. I set everything up correctly, but when I turn it on, I don't see the homeassistant login box, but it says that it refuses to connect to that page. Can't I have an error, for example, in KIOSK_URL? I normally put the IP address of the raspberry pi there.
@talalbinsalman1245 Рік тому
I have the same issue. I sat everything up correctly but home assistant never accept to load into TS7 pro touch screen 'the kiosk' at all. I have repeated the setup over 3 times but with the same issue. Hopefully Mark will provide us with further steps and clear guidance to resolve this issue.
@fibergran9 Рік тому
It's because this video doesn't explain how to install HA, it assumes you have it installed in another host machine.
@LEWISTAI Рік тому
Hi mark, is there any way to code the pi to dim on curtain time and brighten it up during the day?😅
@MarkWattTech Рік тому
What's curtain time? :P With some screens you can use commands to physically change the brightness. I haven't tried on this set one though (although I think you can).
@leemoore915 Рік тому
Nice video Mark. Regarding blanking the screen. You can use Hacs Browser mod but I've found you get the faint glow that doesn't get approval from the wife. If you can find a more suitable way to dim the screen with maybe a python script, they'd be a fair few of us that would be grateful
@MarkWattTech Рік тому
I did think of that but haven’t given it a go. This screen I’m using has physical buttons that allow you to control brightness so I was going to see if I could hook into that. Other than that ive just been shutting the pi down with shell commands. Im still working on this project so potentially another video in the future with better tips and ideas :)
@rulandu 2 місяці тому
it works!!but.. with a 4k monitor and raspberry pi 4,its very laggy!! 2-3 fps , and I don't know why! ty
@jtlogiks Рік тому
Hey Mark, Can I add this screen to a pi already running HA or do I need another pi ?
@MarkWattTech Рік тому
If your running HA OS then no. But otherwise you can. Just bare in mind it will be more load on the Pi :) a dedicated Pi would be best. This could also be done with a Pi Zero for a more form factor look (may be a little sluggish if you have a big setup though). Hope that helps :)
@smd3940 5 місяців тому
Hi Mark! Glad to see you're back. I had a question regarding this setup. In the video you use a dedicated Pi for running the Kiosk. Would it be possible to run the kiosk on the same Pi as Home Assistant? If so, would you recommend avoid doing that due to performance issues or something else?
@MarkWattTech 5 місяців тому
Thanks mate! Ultimately it depends on what and how you are running your HA instance. I wouldn't really advise using the kiosk setup on the same Pi running HA but again it entirely depends on your setup and how taxing your smart home is for the Pi.
@smd3940 5 місяців тому
Thanks @@MarkWattTech !
@AlexBoltonKing Рік тому
Add the camera and face recognition! Have the dashboard change based on the user that's infront of it.
@MarkWattTech Рік тому
That would be really cool. And not too tricky to do 😯
@AlexBoltonKing Рік тому
@@MarkWattTech Part 2? :P
@brewston Рік тому
Does the screen power the Pi ? (or vice versa) Or does this setup require 2 power supplies ? Thanks.
@MarkWattTech Рік тому
Hey Tim, one power cable. The Pi passes power through to the screen. Cheers :)
@irelandshane1984 Рік тому
Another great vid, but the video and sound seem to be lagging each other, same as the last vid 🤔 all my other youtube vid seem fine?
@MarkWattTech Рік тому
Thanks for letting me know Shane. I will have to look into the sync issue and do some tests 👍🏻. I literally went away on a camping holiday when this posted. Is the issue through out?
@irelandshane1984 Рік тому
@@MarkWattTech I never noticed it before, I just had a quick look at previous vids, and it looks like it started on the "This Smart Valve Saved me money" vid. It could just be me 😛 maybe see if anyone else thinks the sync is slightly off 👍 Videos are still 100% watchable.
@MarkWattTech Рік тому
@@irelandshane1984 I have recently changed all of my setup so it could potentially be from that. Again I will have a look for the next one. Appreciate the feedback 👌🏻😄
@yowojtas 3 місяці тому
Where did you installed home assistant ? Do you have another pc for home assistant? Can you put everything on one pi?
@Madthrax23 5 місяців тому
The final price is crazy !! a cheap tablet with fully kiosk is waaaay enough... With this no way to put 3 in your house ^^
@jamescollins6085 6 місяців тому
Would this project be possible with a Pi Zero?
@joeygreenhaw8503 Рік тому
How or what did you use to get your cameras grid to display like that? Mine are large and can only fit 2 horizontal.
@MarkWattTech Рік тому
Hey Joey. Which part do you mean sorry? I think your after the grid card. It’s built into HA natively. You can specify how many columns and rows you want
@joeygreenhaw8503 Рік тому
@@MarkWattTech Thanks for the reply! I'm impressed with your camera layout. I noticed you had room temps overlaid as well as a motion icon for each camera. That is what I was referring to. I did play with grids upon grids upon grids to get their view size down but now am curious how you got the temp overlays and motion indicators. At 4:32 in your video.
@glennnorberg9077 Рік тому
Hi Mark You instructions worked to perfection and now I have a kiosk! If you send the command below the screen will be dimmed. Valid values are 0-255. 20 that I use is the best for me The brightness folder might be in a different location but it is easy to find. sudo bash -c "echo 20 > /sys/class/backlight/10-0045/brightness"
@MarkWattTech Рік тому
Thank you very much! This was something I planned on looking at when I revisited the project. I’ll be sure to give it a go.
@glennnorberg9077 Рік тому
@@MarkWattTech I tried it on my setup and it worked without problems
@HousewerkRecords 28 днів тому
@markwatttech Firstly brilliant video. Everything seemed to go to plan but I’m not getting the Home Assistant login screen. It’s just a grey screen. I’ve checked the url and all seems to be good there. Any idea what this could be? Any help would be massively appreciated. Cheers
@jamesabbott9606 6 місяців тому
hey, so Im very new to home assistant, am I right in thinking, that the PI in your video just logs into via the web UI of another PI running home assistant?
@MrJakeBono Місяць тому
this is also my understanding
@BarbaryStudio Рік тому
if you can manage the security cameras from this kiosk will be awesome option
@MarkWattTech Рік тому
With the kiosk you could access feeds directly or you could access them through HA :)
@PrashantKumar-nz8hq 9 місяців тому
Possible with nvidia jetson orin nano
@michaelglauser7877 2 місяці тому
Pi OS lite (64 bit) doesn't seem to have an audio system installed. How can I get audio from HA to play thru the HDMI 0 cable into the speakers of the 7" tablet?
@michaelglauser7877 2 місяці тому
Fixed: "sudo apt install alsa", and in /boot/firmware/config.txt commented out # dtparam=audio=on Reboot. Now sound works! Then I set up mpd with: "sudo apt install alsa-utils mpd" and in /etc/mpd.conf, uncomennted out the "audio_output" section for type "alsa". Then enabled mpd with: "sudo systemctl enable mpd" In HA, configuation.yaml, I added the following entry, (set your IP and Name as needed.) media_player: - platform: mpd name: "Kiosk1 speakers" host: [ ip address of Kiosk Pi.] Now I can access the kiosk as a Media Player in HA. Automations got real easy after this.
@dylanethington9793 11 місяців тому
Everything worked for all the installs but when it reboots it says ERR_CONNECTION_REFUSED, does anyone know why I'm getting this error
@MarkWattTech Рік тому
Where would you place one of these? and what kind of enclosure would you put it in? 🤔
@Smarthomeyourself Рік тому
I've put a 7" in my wall beside the frontdoor. also a pi with a 7" touch screen. But with auto-login because I don't want a keyboard there. I've done the login via xdotool. you can take a look in my video about on 20:36.
@kamilnh17 Рік тому
Can I use raspberry pi Pico W for this project?
@MarkWattTech Рік тому
I wouldn’t recommend a Pico for this 😬
@sven1962 5 місяців тому
I have completed all the steps but when I restart the pi with sudo reboot it goes to the web page but then I get the message: This site can't be reached. As far as I know, you only installed Raspberry PI OS and not Home Assistant, right? Do you also have to download Home Assistant somewhere or what?
@RinceCochon 3 місяці тому
Anyone know how to change the resolution of the kiosk ? I use a screen with a resolution of 320*480 (Pixel). Thx for any help :)
@glennlenaerts5828 5 місяців тому
hi, i get a ssl error when it launch HA. how can i fix this problem?
@markmarais8524 8 місяців тому
Funny story I tried this twice and my rasbery pi screen just loads into the terminal each time after boot. Don't receive any error though
@mrgman7899 Рік тому
great job ,im stuck (this site can not be reached (ip,,,,,refused to connect)) please help
@MarkWattTech Рік тому
Which part are you stuck on?
@mrgman7899 Рік тому
@@MarkWattTechi have done every thing as you have mentioned its opens a web browser but it does not show the dashboard on the pi screen ,says can not connect (refused to connect ).as if the web site is down
@paolopuricelli2950 Рік тому
i applied this guide on a raspberry 3 but when i install chronium , after reboot the cpu fixed on 100% and all system are freezed.
@MarkWattTech Рік тому
Are you connecting wired or wireless? I use this exact setup with Pi3s and 4s with no problems.
@piratkeft111 Рік тому
My screen starts but my HA dont start it seems. I get "This site can't be reached". What can be wrong?
@MarkWattTech Рік тому
Are you using your internal IP address? :)
@Drm_09 Рік тому
I'm also facing the Same issue, which says "No internet". Kindly help me fix this
@piratkeft111 3 місяці тому
@@MarkWattTech I am using internal IP, something is wrong with my SSL it seems. Date and time is correct and I have reinstalled SSL.
@BigHammer_ 3 місяці тому
Why do you need to have a full size SSD drive? couldnt you just use a flash drive or SD Card?
@MarkWattTech 3 місяці тому
SSDs typically have more storage, are faster and have better reliability. The read life of them is also much longer than a standard SD card.
@matthewflynn6374 Рік тому
Where is home assistant running from, another raspberry pi or pc in the background?
@MarkWattTech Рік тому
Heya. Yeah so HA runs on another machine. This pi just points chrome at it. You could do it all on the same pi but it will obviously eat up some of your processing. Whats nice about this design is you can interface with HA and if you wanted to you could run additional services to connect to your HA machine (Pi hole etc, media servers etc)
@Giuliotrane Рік тому
Oh...so the home assistant is not installed on this Raspberry connected to the screen?
@MarkWattTech Рік тому
This basically just points at your existing HA setup. If you wanted to you could install HA on it and then have the same pi point to the instance and use the screen. Its extra processing and resource for your pi to mange though.
@Giuliotrane Рік тому
@@MarkWattTech do you think a pi can handle it or it's better to have 2 different pi?
@MultiBS Рік тому
Worked great, THX! However, HomeAssistant is always upside down, even with the flag "lcd_rotate=2" set. The bootup screen is now correct, but as soon as Chromium launches, its back to upside down. Am i missing something?
@lugopc Рік тому
Same issue here Any suggestions ?
@lugopc Рік тому
This is how I fix my issue add this to /boot/cmdline.txt, keeping everything on one line, then reboot. video=DSI-1:800x600M,margin_right=0,margin_left=0,margin_top=0,margin_bottom=0,rotate=180 sudo nano /usr/share/X11/xorg.conf.d/40-libinput.conf And add Option "TransformationMatrix" "-1 0 1 0 -1 1 0 0 1" in the relevant touchscreen section, so that section looks like: Section "InputClass" Identifier "libinput touchscreen catchall" MatchIsTouchscreen "on" Option "TransformationMatrix" "-1 0 1 0 -1 1 0 0 1" MatchDevicePath "/dev/input/event*" Driver "libinput" EndSection sudo nano /boot/config.txt and add lcd_rotate=2
@MultiBS Рік тому
@@lugopc Thank you so much for the follow up, really appreciate it! Will try it out later today!
@Madthrax23 5 місяців тому
It's sad how connectors (hdmi etc) make solutions really complicated to pack and make them beautiful...
@SergeyToroshchin Рік тому
Why not to buy RPi ready screen with housing? at least it will not looks ugly ... Ive used one and it power it self and power RPi ... it has touch screen and audio over HDMI ... only one wire to power up it
@MarkWattTech Рік тому
I have one if those for the next one :P
@myscho Рік тому
I'd probably prefer to stick with the older 10" Samsung tablet. This design has a really low wife approval factor in my case. 💁♂
@MarkWattTech Рік тому
I don’t think I would wall mount these just because of the profile. But in a fancy case or in a picture frame design on a side/shelf it would definitely work :) This could also be done with a Zero W for a more form factor design.
@ryan39584 Рік тому
Would be easier to use a cheap tablet, work better too.
@MarkWattTech Рік тому
Easier yes. Works better… no I’ve used many tablets as HA wallpanels. The Pi is by far the best thing to use. Its form factor is the main issue
@NicksStuff 3 місяці тому
That's a bit overkill. If you're gonna use a Pi 4, you might as well make it *run* home assistant...
@salta199 Рік тому
Ummmm un tablet è molto meglio. Non che bisogno di tutti sti sbattimenti. Pure per il costo un tablet costa molto di meno del tuo progetto.☺️😉✌️
@HousewerkRecords 28 днів тому
Brand new rpi4b completely unresponsive. Shows google search and that’s it. No HA. Can’t even get to the command prompt. ALT+F4 goes to blank screen and stuck. Will completely wipe this project and start again with the pi so so I can actually do something. So far I can’t recommend this.
@michaels5167 Рік тому
Mark, I really appreciate your videos. But this one... Just stopped watching when you started to trying to justify the cost. Everything noted in the video is still more than double the price a year ago. Not even worth it. I think the justifications provided are a big stretch for this project. But kudos none the less for providing an interesting tutorial.
@MarkWattTech Рік тому
Heya. I totally agree about the prices. I did mention in my post that this project is only really ideal if you already have parts etc lying around.
@tommygilchrist7771 Рік тому
From an economic point of view, it can't be justified. From a "let's push this button and see what happens" point of view however..... 🙂
@EdoDijkgraaf Рік тому
I think we should be honest with ourselves. Raspberry Pi has let us down. I no longer focus on our beloved Pis. Mini computers, esp32s, etc, etc. Everything except Pis. I can now buy as many gpus as I want, but a simple Pi...?
@ShaamanRyu Рік тому
Sorry, just to help me understand, was the frustration over the supply of raspberry pi? Or something else?
@EdoDijkgraaf Рік тому
@@ShaamanRyu Yes, it's hard to see something you love degrade itself. Every time someone asks me what to buy, I tell them to buy a pre-owned Dell, HP, or Lenovo mini computer. Those 1 liter computers are more powerful and cost the same. Still, I'd rather recommend a Raspberry Pi. The RPi is more energy efficient and I think you can learn more from a first install with a Raspberry Pi. But if they can't buy one, there's a chance that users will never get to know the RPi. They will never have the tinkering experience. That's hard for me. I want people to grow their knowledge.
@ShaamanRyu Рік тому
@@EdoDijkgraaf just out of curiosity, do those ASUS tinker board things work?
@JasperJanssen Рік тому
@@EdoDijkgraaf how is it “degrade themselves” when the problem is just they’ve become so popular they can’t make enough of them?
@EdoDijkgraaf Рік тому
@@JasperJanssen waiting six months for a sbc is not the result of proper planning. A while ago, all brands faced supply chain issues. How come I can buy almost any gpu at msrp now? Unless I'm willing to pay €114.99 for a $15.00 Zero 2 W on Amazon, I'll have to wait until the end of November. I love Raspberry Pi, but if I can't trust them to deliver I have to search for alternatives.
@Casemod Рік тому
Hi Mark, I have directly implemented the project has worked great, you have explained it perfectly. Thank you very much! Is there a way to jump to another website If there a idle time 20sec.. In my case to Dakboard (as screensaver) and jump back to Home Assistant at activity? redirect-url -t 20
Adam Cooke
Переглядів 103 тис.
Eben Kouao
Переглядів 1,9 млн